Guar gum, a low-cost sustainable biopolymer, for wastewater treatment: A review.

Rapid population growth and the resultant pollution of freshwater resources have created a water stress condition reducing the availability of safe and affordable water. Guar gum, a biocompatible macromolecule obtained from the endosperm of the seeds of Cyamopsis tetragonolobus, is a fascinating raw material for multifunctional adsorbents. This review assembled the work conducted by various researchers over the past few decades and discussed the structure, properties, and different modifications methods employed to develop versatile guar gum-based adsorbent. The paper also summarized the recent progress of guar gum-based nanocomposites for the remediation of multiple hazardous substances such as organic dyes, toxic heavy metal ions, oil-water separation as well as inhibiting the growth of bacterial pathogens. Thus, the important contribution of guar gum composites to safeguard the water quality is highlighted which will overcome the limitations and streamline the future course of innovative research.

Comparative Assessment of Silver Nanocomposites' Biological Effects on the Natural and Synthetic Matrix.

The aim of our investigation was to make a comparative assessment of the biological effects of silver nanoparticles encapsulated in a natural and synthetic polymer matrix. We carried out a comparative assessment of the biological effect of silver nanocomposites on natural (arabinogalactan) and synthetic (poly-1-vinyl-1,2,4-triazole) matrices. We used 144 three-month-old white outbred male rats, which were divided into six groups. Substances were administered orally for 9 days at a dose 500 µg/kg. Twelve rats from each group were withdrawn from the experiment immediately after nine days of exposure (early period), and the remaining 12 rats were withdrawn from the experiment 6 months after the end of the nine-day exposure (long-term period). We investigated the parietal-temporal area of the cerebral cortex using histological (morphological assessments of nervous tissue), electron microscopic (calculation of mitochondrial areas and assessment of the quality of the cell nucleus), and immunohistochemical methods (study of the expression of proteins regulating apoptosis bcl-2 and caspase 3). We found that the effect of the nanocomposite on the arabinogalactan matrix causes a disturbance in the nervous tissue structure, an increase in the area of mitochondria, a disturbance of the structure of nerve cells, and activation of the process of apoptosis.

Guar gum-derived galactomannan induces inflammatory responses and increased energy expenditure in the intestine.

Guar gum-derived galactomannan (GGGM) has been widely used in the food industry for a long time and its adverse impacts have been scarcely reported. Galactomannan is considered to have a structure similar to the surface components of certain pathogens, and the present study was thus conducted to investigate if oral administration of GGGM could cause physiological effects that were hypothesized to be related to intestinal inflammatory responses. The results showed that oral administration of GGGM resulted in compromises on growth performance, an increase of the relative weight of spleen and epididymal fat, and an elevation of the α1-acid glycoprotein content in both serum and livers of mice. With regard to energy metabolism-related indices, the activities of intestinal lactic dehydrogenase and succinic dehydrogenase were all increased by the GGGM treatment in both in vivo and in vitro experiments, the latter of which also showed an elevation in the consumption of reducing sugar by intestinal epithelial cells along with a reduced viability of these cells in response to the GGGM treatment. Notably, the GGGM treatment triggered intestinal inflammatory responses that were evidenced by the increased expression of intestinal inflammatory cytokines such as TNF-α and IL-6 both in vivo and in vitro, which were at least partially responsible for the increased energy expenditure in the intestine and the retardation of growth. The results of this study could expand our knowledge of GGGM administration and provide integrated insights into the consumption of GGGM-containing foods.

Fractionation, chemical characterization and immunostimulatory activity of ß-glucan and galactoglucan from Russula vinosa Lindblad.

Water-extracted polysaccharides from Russula vinosa Lindblad (WRP) were separated into three fractions (WRP-1, WRP-2 and WRP-3) by gradient ethanol precipitation and gel chromatography. Structural characterization indicated that WRP-1 was a branched ß-(1→3)-glucan and exhibited rigid helical conformation in aqueous solution with Mw of 2,180 kDa and radius of gyration (Rg) of 123.4 nm. The galactoglucan of WRP-2 and WRP-3 were mainly composed of →6)-Galp-(1→ and →4)-Glcp-(1→ terminated by glucose and mannose, presenting much lower Mw (392 and 93.6 kDa) and Rg (57.6 and 42.6 nm), and more incompact flexible conformation than WRP-1. All fractions showed potential immunostimulatory activity by promoting macrophage proliferation, phagocytosis, as well as the release of nitric oxide and cytokines (TNF-α and IL-1ß). WRP-1 with unique structure and conformation showed the best immunostimulatory effects among them. This study suggests that WRP could be explored as natural immunostimulator used in the food and pharmaceutical industry.

Optimization of ß-mannanase production by Bacillus subtilis US191 using economical agricultural substrates.

The Bacillus subtilis US191 strain producing highly thermostable ß-mannanase was previously selected as potential probiotic candidate for application as feed supplement in poultry industry. Initially, the level of extracellular ß-mannanase production by this strain was 1.48 U ml-1 . To improve this enzyme titer, the present study was undertaken to optimize the fermentation conditions through experimental designs and valorization of agro-industrial byproducts. Using the Plackett-Burman design, in submerged fermentation, a set of 14 culture variables was evaluated in terms of their effects on ß-mannanase production. Locust bean gum (LBG), soymeal, temperature, and inoculum size were subsequently optimized by response surface methodology using Box-Behnken design. Under optimized conditions (1 g L-1 LBG, 8 g L-1 soymeal, temperature of 30°C and inoculum size of 1010 CFU ml-1 ), a 2.59-fold enhancement in ß-mannanase titer was achieved. Next, to decrease the enzyme production cost, the effect of partial substitution of LBG (1 g L-1 ) by agro-industrial byproducts was investigated, and a Taguchi design was applied. This allowed the attaining of a ß-mannanase production level of 8.75 U ml-1 in presence of 0.25 g L-1 LBG, 5 g L-1 of coffee residue powder, 5 g L-1 of date seeds powder, and 5 g L-1 of prickly pear seeds powder as mannans sources. Overall, a 5.91-fold improvement in ß-mannanase production by B. subtilis US191 was achieved.

Cost-effective adsorbent from arabinogalactan and pectin of cactus pear peels: Kinetics and thermodynamics studies.

Cactus pear peel as agricultural waste containing arabinogalactan and pectin was thermally treated at 300 °C for 4 h and the resultant carbonized material was applied as adsorbent for the removal of methylene blue dye as a model cationic dye. The prepared adsorbent was characterized by means FTIR for structural characterization, N2 physisoprtion measurements for texture properties, SEM and EDAX for morphological and elemental analysis. The characterization results clearly show that the prepared material is porous with several -OH and CO terminals. The point of zero charge was found to be 7 as detected by batch equilibrium method. The adsorption process was optimized in terms of pH values, contact time, initial dye concentration and temperature. The kinetic study indicated that the pseudo-second-order model can perfectly describe the investigated adsorption process; moreover, the equilibrium results were best fitted by Freundlich model. Furthermore, at pH 8.0, the adsorption capacity was achieved to the maximum value of methylene blue as 102 mg/g. Thermodynamic investigation showed that the adsorption process is spontaneous, endothermic in nature with higher entropy, while the activation energy calculations indicated a physisorption process. The obtained results showed the high potential of the bio-based adsorbent for removal of methylene blue from wastewater.

Inhalable locust bean gum microparticles co-associating isoniazid and rifabutin: Therapeutic assessment in a murine model of tuberculosis infection.

Tuberculosis is a leading cause of death worldwide. Although the development of new antimycobacterial drugs is an obvious and necessary strategy to address the disease, improving the therapeutic performance of drugs already approved constitutes a valuable alternative approach. As the lung is the most affected organ, where M. tuberculosis is able to survive and proliferate, the direct pulmonary delivery of antitubercular drugs comprises a highly promising therapeutic strategy. In this work, spray-dried locust bean gum (LBG) microparticles were used to deliver a combination of two first line antitubercular drugs, isoniazid (INH) and rifabutin (RFB), to the alveolar zone, where macrophages hosting the bacteria reside. LBG is expected to mediate favoured macrophage uptake of microparticles, leading to enhanced therapeutic effect. The therapeutic effect of LBG/INH/RFB microparticles was evaluated in a murine model infected with M. tuberculosis, strain H37Rv and compared with oral co-therapy of INH and RFB in the free form. The pulmonary administration of LBG/INH/RFB microparticles 5 times per week was the only treatment schedule that provided negative growth index values in lung (-0.22), spleen (-0.14) and liver (-0.26) even using a lower therapeutic dose for both antibiotics. For the control group, the respective values were +1.95, +0.75 and +0.96.

Shake No Bake: A Homemade Ultrasound Gel Recipe for Low-Resource Settings.

Commercially produced ultrasound coupling gel is often a scarce resource in rural regions of low-income countries that use sonography as their main imaging modality and, when available, may be cost prohibitive. Various homemade gels were created and tested to assure image quality was not compromised. Glucomannan-based gel and guar gum-based gel had superior physical properties in initial testing and showed no substantial difference compared with commercially available ultrasound gel on subject and phantom imaging and analysis (P > .05 using a 1-tailed sign test). Neither gel required heating, attracted insects, damaged ultrasound transducers, stained samples of clothing, or had harmful effects to subjects.

Improving succinic acid production by Actinobacillus succinogenes from raw industrial carob pods.

Carob pods are an inexpensive by-product of locust bean gum industry that can be used as renewable feedstock for bio-based succinic acid. Here, for the first time, unprocessed raw carob pods were used to extract a highly enriched sugar solution, afterwards used as substrate to produce succinic acid using Actinobacillus succinogenes. Batch fermentations containing 30g/L sugars resulted in a production rate of 1.67gSA/L.h and a yield of 0.39gSA/g sugars. Taking advantage of A. succinogenes' metabolism, uncoupling cell growth from succinic acid production, a fed-batch mode was implemented to increase succinic acid yield and reduce by-products formation. This strategy resulted in a succinic acid yield of 0.94gSA/g sugars, the highest yield reported in the literature for fed-batch and continuous experiments, while maintaining by-products at residual values. Results demonstrate that raw carob pods are a highly efficient feedstock for bio-based succinic acid production.

[EXPERIMENTAL ASSESSMENT OF THE IMMUNOTROPIC EFFECTS OF ARABINOGALACTAN AND PECTINACEOUS POLYSACCHARIDES ISOLATED FROM FERULA KUCHISTANICA.]

It is established that arabinogalactan and pectinaceous polysaccharides isolated from Ferula kuchistanica are capable of stimulating a primary immune response in mice by increasing the number of antibody-producing cells in the spleen in response to immunization with sheep red blood cells in both intact animals (on average by 51.0%; p < 0.005) and those with secondary immunodeficiency caused by irradiation (on average by 164.4%; p < 0.005). The treatment with compounds studied also significantly increased the functional condition of cells of the mononuclear phagocyte system (on average by 27.0%; p < 0.005).

ASSESSMENT OF GUAR AND XANTHAN GUM BASED FLOATING DRUG DELIVERY SYSTEM CONTAINING MEFENAMIC ACID.

We aimed to assess guar and xantban gum based floating drug delivery system containing mefenamic acid. Floating tablets of nefenamic acid were formulated with different concentrations of guar and xanthan gum via wet granulation method. The flow properties of granules that is: bulk density, tapped density, flow rate, Carr index, Hausner's ratio, compressibility index and angle of repose as well as physical parameters of the compressed tablets including: hardness, friability, thickness and swelling indices were determined and found to be good. Xanthan gum was superior to guar gum in maintaining drug release, but a combination of polymers was found to be the best for achieving sustained release up to 12 h due to the synergistic effect of both gums. Drug release mechanism was best explained by Korsmeyer-Peppas model. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies showed absence of any visible interaction. Stability studies at 40°C (75% RH) showed that the formulation was stable at elevated temperature. It can be concluded that floating tablets can be used as a sustained release matrix due to their superior characteristics.

Field assessment of guar gum stabilized microscale zerovalent iron particles for in-situ remediation of 1,1,1-trichloroethane.

A pilot injection test with guar gum stabilized microscale zerovalent iron (mZVI) particles was performed at test site V (Belgium) where different chlorinated aliphatic hydrocarbons (CAHs) were present as pollutants in the subsurface. One hundred kilograms of 56µm-diameter mZVI (~70gL(-1)) was suspended in 1.5m(3) of guar gum (~7gL(-1)) solution and injected into the test area. In order to deliver the guar gum stabilized mZVI slurry, one direct push bottom-up injection (Geoprobe) was performed with injections at 5 depths between 10.5 and 8.5m bgs. The direct push technique was preferred above others (e.g. injection at low flow rate via screened wells) because of the limited hydraulic conductivity of the aquifer, and to the large size of the mZVI particles. A final heterogeneous distribution of the mZVI in the porous medium was observed explicable by preferential flow paths created during the high pressure injection. The maximum observed delivery distance was 2.5m. A significant decrease in 1,1,1-TCA concentrations was observed in close vicinity of spots where the highest concentration of mZVI was observed. Carbon stable isotope analysis (CSIA) yielded information on the success of the abiotic degradation of 1,1,1-TCA and indicated a heterogeneous spatio-temporal pattern of degradation. Finally, the obtained results show that mZVI slurries stabilized by guar gum can be prepared at pilot scale and directly injected into low permeable aquifers, indicating a significant removal of 1,1,1-TCA.

Chitosan-guar gum-silver nanoparticles hybrid matrix with immobilized enzymes for fabrication of beta-glucan and glucose sensing photometric flow injection system.

Simple and fast photometric flow injection analysis system was developed for sensing of ß-1,3-glucan from medicinal mushroom Ganoderma lucidum during fermentation. For this purpose, the chitosan-guar gum-silver nanoparticle-beta glucanase (Ch-GG-AgNPs-ßG) beads and Ch-GG-AgNPs-GOD (glucose oxidase) beads were prepared. The bead packed mini-columns were then used to assemble a flow injection analysis (FIA) system for the detection of ß-(1→3)-d-glucan biomarker or glucose. This colorimetric flow system can detect glucose and glucan with detection limits as low as 50ngmL(-1) and 100ngmL(-1) (S/N=3), respectively. The analysis time of this FIA was approximately 40s, which is faster than the previously reported glucan sensors. The glucose and glucan calibration curves were obtained in the range of 0.25-1.25µgmL(-1) (R(2)=0.988) and 0.2-1.0µgmL(-1)(R(2)=0.979), respectively. The applicability of the nano-bio-composite FIA sensor system for spiked and real ß-(1→3)-d-glucan samples were tested, and the accuracy of the results were greater than 95%. Thus, the designed FIA provides a simple, interference free and rapid tool for monitoring glucose and ß-glucan content, which can be used for various food samples with a little modification.

A comprehensive evaluation of the toxicology of the "Deli" cast sheet process used in experimental cigarettes.

CONTEXT: Manufacture of cigarettes results in tobacco by-products, some of which can be processed and added back to cigarettes. Such additions (known as reconstituted tobacco or reconstituted leaf) have been shown to reduce tar yields. A new process (termed "Deli" cast sheet) is a potential refinement of the reconstitution process. OBJECTIVE: Compare toxicity of smoke from experimental cigarettes made with reconstituted leaf with that from cigarettes made with Deli cast sheet. MATERIALS AND METHODS: Analytical chemistry, Salmonella mutagenicity and cytotoxicity assays were used to evaluate the composition biological activity of mainstream smoke from experimental cigarettes made with Deli cast sheet or with reconstituted leaf. The effect of different amounts of guar and propylene glycol in Deli cast sheet was also evaluated. RESULTS: Small increases in the amount of nitrogen oxides were found as a result of inclusion of the Deli cast sheet when compared with reconstituted leaf; no differences in cytotoxicity or mutagenicity were found. CONCLUSION: The Deli process neither significantly modified chemical composition of smoke nor affected its biological activity, as measured by the mutagenicity and cytotoxicity assays used here.

Safety assessment and caloric value of partially hydrolyzed guar gum.

Guar gum and partially hydrolyzed guar gum (PHGG) are food ingredients that have been available for many years. PHGG is the partially hydrolyzed product from guar gum obtained from the Indian cluster bean (Cyanopsis tetragonolopus). The gum (CAS Registry No. 9000-30-0) is composed of galactomannan, a gel-forming polysaccharide with a molecular weight ranging from 200 to 300 kDa. The intact and partially hydrolyzed forms have multiple food applications. The intact material can be used to control the viscosity, stability, and texture of foods. PHGG is highly soluble and has little physical impact on foods. Both forms are indigestible but are excellent sources of fermentable dietary fiber. The caloric value of intact guar gum is accepted as 2.0, whereas the caloric value of PHGG has not been firmly established. It is the goal of this paper to review the chemistry, safety, in vivo effects, and caloric value of PHGG.

Use of natural gums and cellulose derivatives in production of sustained release metoprolol tablets.

Metoprolol tartrate sustained-release tablets (100 mg) were prepared using xanthan/guar gums and also hydroxypropyl methyl cellulose (HPMC) carboxymethyl-Cellulose (CMC) polymers by direct compression method. Physical characteristics of the tablets and water uptake in addition to their dissolution profiles were compared with standard (Lopressor SR) tablets. Dissolution test was performed in the phosphate buffer solution (pH 6.8) and the samples were analyzed spectrophotometerically in 275.7 nm. Dissolution studies showed that formulations containing 100 and 80% of HPMC, 100% of guar, and 20% of xanthan followed the Higuchi model, while those containing 60 and 40% HPMC and 100 and 80% xanthan followed a zero-order model. The tablets with 40% xanthen followed a Hixon-Crowell model. In cellulose derivatives the highest MDT and dissolution efficiency until 8 hr (DE8%) belonged to tablets with 40% HPMC, increasing the amount of CMC decreased the drug release rate, and formulations containing 60 and 40% of HPMC had the USP dissolution standards. While, in the gum formulations, the highest mean dissolution time and the lowest DE(8)% belonged to tablets with 100% xanthan, increasing the xanthan decreased the release rate of metoprolol, and formulations containing 80 and 100% xanthan had the USP dissolution standards. Results showed that natural gums are suitable for production of sustained-release tablets of metoprolol.