Assessment of gingival translucency at the mandibular incisors with two different probing systems. A cross sectional study.

OBJECTIVES: Increasing evidence indicates that the thickness of periodontal soft tissues plays an important role in various clinical scenarios, thus pointing to the need of further clinical research in this area. Aim of the present study was to assess gingival thickness at the mandibular incisors by translucency judgement with two different probes and to validate if these methods are comparable and applicable as diagnostic tools. MATERIALS AND METHODS: A total of 200 participants were included; gingival tissue thickness was measured by judging probe translucency at both central mandibular incisors, mid-facially on the buccal aspect of each tooth using a standard periodontal probe and a set of color-coded probe, each with a different color at the tip, i.e. Colorvue Biotype Probe (CBP). Frequencies and relative frequencies were calculated for probe visibility. Agreement between the standard periodontal probe and the CBP was evaluated via the kappa statistic. RESULTS: When the periodontal probe was visible, the frequency of CBP being visible was very high. Kappa statistic for the agreement between the standard periodontal probe and the CBP was 0.198 (71.5% agreement; p-value < 0.001) for tooth 41 and 0.311 (74.0% agreement; p-value < 0.001) for tooth 31, indicating a positive association of the two methods. CONCLUSIONS: An agreement that reached 74% was estimated between the standard periodontal probe and the color-coded probe at central mandibular incisors.  CLINICAL RELEVANCE: In the context of the present study, the two methods of evaluating gingival thickness seem to produce comparable measurements with a substantial agreement. However, in the 1/4 of the cases, the visibility of the color-coded probe could not assist in the categorization of the gingival phenotype.

[Assessment of the condition of organs and tissues of the oral cavity in people with dentition defects against the background of metabolic syndrome]. / Otsenka sostoyaniya organov i tkanei rta u lits s defektami zubnykh ryadov na fone metabolicheskogo sindroma.

OBJECTIVE: The aim of the study is comparative analysis of the condition of oral organs and tissues in people with metabolic syndrome (MS) of varying severity before orthopedic dental rehabilitation based on dental implants. MATERIAL AND METHODS: 255 patients (151 women and 104 men) aged from 35 to 65 years were examined. 3 groups were formed: 2 study groups and a comparison group. Groups 1 and 2 included individuals with excess body weight and MS. The control group consisted of 88 people without MS. An index assessment of the condition of the periodontium and tissue structures of the alveolar bone (according to cone-beam computed tomography), microcirculation in the gingival mucosa was carried out using laser Doppler flowmetry. RESULTS: The analysis of the periodontal condition indicators showed that in all groups of patients with MS, periodontal pathology occurred, the value of which was significantly higher than in patients of the control group (p <0.05). The analysis of bone tissue according to CBCT data showed that the most favorable conditions (type 1 and type 2 of bone according to Misch) for dental implantation are found in people without MS, respectively 3.5% and 35.1% of cases. The intensity of blood flow (σ) was 21.2% lower in group 1 and 48% in group 2, compared with the control group. Vasomotor activity (Kv) was 13.2% lower in the first group and 35% lower in the second group. A decrease in amplitudes in the area of all rhythms in the LDF gram was found: low-frequency - by 15.6%, high-frequency - by 16.9%, pulse - by 3.6%. CONCLUSION: Changes occurring in the organs and tissues of the mouth against the background of MS of varying severity lead to a decrease in tissue perfusion with blood and blood flow activity, a local decrease in bone density, and as a result, pathological changes in periodontal tissues. Before performing dental rehabilitation, it is necessary to take into account all the risks of possible complications caused by the general condition of organs and systems of people with MS.

Assessment of the correlation between supracrestal gingival tissue dimensions and other periodontal phenotypes components via the digital registration method: a cross­sectional study in a Chinese population.

BACKGROUND: Supracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning. METHODS: This cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05. RESULTS: A total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC. CONCLUSION: SGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated. TRIAL REGISTRATION: This study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24).

A non-invasive method for the assessment of gingival thickness in the aesthetic zone and the concept of the gingival geometric ratio in an Asian population.

The aim of this study was to investigate the gingival thickness and biologic width in the aesthetic zone (maxillary central and lateral incisors) in an Asian population using cone beam computed tomography (CBCT) as a non-invasive measurement method, prior to immediate implant placement. The gingival geometric ratio is introduced as a new parameter for assessing soft tissue stability and hence predicting the aesthetic outcome. The gingival thickness, biologic width category (normal, high, and low crest), and gingival geometric ratio (shape and configuration of the gingival tissues) were assessed for 171 central and 175 lateral incisors on high-resolution CBCT images. Thick gingivae were found in 93.6% of the central incisors and 64% of the lateral incisors (P < 0.001). The difference in thickness between the central and lateral incisors was statistically significant (P < 0.001). Regarding the biologic width of the facial gingival tissue, the majority of central (64.8%) and lateral (64.3%) incisors were categorized as low crest (>3 mm). The study found that most of the gingivae of the maxillary central incisors were thick, while thin gingivae were more prevalent in the lateral incisors. Therefore, an individual patient may have different gingival thickness types, and 'one individual, one gingival biotype' may not be true. Furthermore, the majority of the facial gingival tissues of the maxillary incisors were found to be low crest.

Assessment of the relationship between tooth inclination and gingival and alveolar bone dimensions using computed tomography of the maxillary anterior teeth: a cross-sectional study.

OBJECTIVE: The present study aimed to investigate the relationship between tooth inclination and gingival and bone dimensions in maxillary anterior teeth. METHODS: This cross-sectional study included cone-beam computed tomography (CBCT) images of 160 maxillary anterior teeth (30 individuals). Tooth inclination, gingival and bone thickness, and distances from cementoenamel junction to alveolar bone crest and gingival margin were measured in the labial surface. The correlations were analyzed using Pearson and partial correlation tests (p≤0.05). RESULTS: In the central incisors, tooth inclination was positively and significantly related to apical bone thickness (R = 0.34, p= 0.001). In the canines, tooth inclination was negatively and significantly related to cervical bone thickness (R = - 0.34, p= 0.01) and positively associated to apical bone thickness (R = 0.36, p= 0.01) and to gingival margin-cementoenamel junction distance (R = 0.31, p= 0.03). In the lateral incisors, tooth inclination was not associated with gingival or bone dimensions. CONCLUSIONS: In the central incisors, the greater the labial tooth inclination, the greater is the apical bone thickness. In the canines, the greater the labial tooth inclination, the smallest is the cervical bone thickness, the greater is the apical bone thickness, and the greater is the gingival margin. Gingival and bone dimensions should be assessed when planning orthodontic treatment involving buccal movement of central incisors and canines.

Assessment of gingival thickness in the maxillary anterior region using different techniques.

OBJECTIVES: Gingival phenotype is closely related to treatment success and aesthetic results in the maxillary anterior region. Several methods were proposed to measure the dimensions of the gingival tissue. This study aimed to evaluate the gingival thickness using clinical and radiographic techniques and to explore the association between gingival thickness and gingival phenotypes classified by color-coded phenotype probes. MATERIALS AND METHODS: The gingival thickness of 86 periodontally healthy maxillary anterior teeth was assessed using transgingival probing (TGP) and cone-beam computed tomography (CBCT). The gingival phenotype was classified as thin, medium, thick, or very thick by transparency of the color-coded probes through the gingival sulcus. The labial alveolar bone thickness was measured on CBCT images. The keratinized tissue width (KTW) was recorded. RESULTS: Good to excellent agreement was found between TGP and CBCT regarding the thickness of the gingiva (p<0.001). There was a very high correlation between the phenotypes determined by color-coded probes and the gingival thickness measured by TGP (r=0.953, p<0.001). KTW was significantly higher in thick and very thick phenotype groups compared with thin phenotype group. CONCLUSION: Cone-beam computed tomography images and the probe transparency method with color-coded probes are reliable for identifying the gingival phenotype in the maxillary anterior region, based on comparisons to direct transgingival probing. CLINICAL RELEVANCE: The assessment of the gingival phenotype is essential, especially in the aesthetic zone, to obtain predictable and favorable clinical outcomes in various dental procedures. The newly introduced color-coded probes comprise a non-invasive and reliable method for this.

Assessment of Gingival Thickness Using CBCT Compared to Transgingival Probing and Its Correlation with Labial Bone Defects: A Cross-Sectional Study.

PURPOSE: The aims of this study were to determine the accuracy and repeatability of CBCT for assessing gingival thickness (GT) as compared to transgingival probing and to investigate the correlation between GT and labial bone defects. MATERIALS AND METHODS: This cross-sectional study comprised 37 patients who underwent CBCT imaging. A total of 111 sites were examined, and measurements were obtained from the same points on selected index teeth. The GT was measured, and the presence of dehiscence and fenestration defects was evaluated on the CBCT scans. Transgingival probing was performed at the same points as those used on the scans. Intraexaminer reliability for clinical and radiographic measurements and interexaminer reliability for radiographic measurements were tested. Agreement between the measurement methods and the correlations between GT and labial bone defects were assessed using intraclass correlation coefficient (ICC) and chi-square test, respectively. RESULTS: The agreement between both measurement methods was excellent and statistically significant (ICC = 0.888; P < .001), with a bias of 0.04 (95% CI: 0.01 to 0.08). Significant differences in the occurrence of fenestration (P = .023) and dehiscence defects (P < .001) between the thin and thick gingival phenotypes were observed, and the defects were positively correlated with the thin gingival phenotype. CONCLUSION: CBCT demonstrated high diagnostic accuracy for GT measurements, with minimal discrepancies from the transgingival method. The presence of dehiscence and fenestration defects was positively correlated with thin gingival phenotype.

Assessment of the relationship between labial gingival thickness and the underlying bone thickness in maxillary anterior teeth by two digital techniques.

This study aimed to noninvasively assess the relationship between the labial gingival thickness (GT) and the underlying bone thickness (BT) of maxillary anterior teeth by two digital techniques. A total of 30 periodontally healthy participants with 172 maxillary anterior teeth were enrolled. GT and BT were measured at 2, 4 and 6 mm apical to the cemento-enamel junction (CEJ) by two digital techniques: M1-cone-beam computed tomography (CBCT) and M2-digital intraoral scanning (DIS) combined with CBCT. The Pearson's correlation coefficient was calculated to determine the correlation between GT and BT. A significant negative correlation was identified between GT and BT at 2 mm apical to the CEJ for central incisors (CI), lateral incisors (LI), and canines (CA) both by M1 and M2, while a weak negative correlation at 4 mm apical to the CEJ was observed by M1 for CA. No significant correlation was found at other sites by both M1 and M2. The labial BT was < 1 mm in most cases (85% of CI; 97% of LI; and 90% of CA). Within the limitation of this study, it was concluded that GT and BT seemed to be negatively correlated at 2 mm apical to the CEJ. Therefore, caution is warranted when implant restoration at the esthetic area of the anterior teeth.

Gingival Thickness Assessment at Mandibular Incisors of Orthodontic Patients with Ultrasound and Cone-beam CT. A Cross-sectional Study.

PURPOSE: To use and evaluate two methods for measuring gingival thickness (GT) at mandibular incisors of orthodontic patients and compare their performance in assessing periodontal anatomy through soft tissue thickness. MATERIALS AND METHODS: The sample consisted of 40 consecutive adult orthodontic patients. GT was measured just before bracket placement at both central mandibular incisors, mid-facially on the buccal aspect, 2 mm apically to the free gingival margin with two methods: clinically with an ultrasound device (USD) and radiographically with cone-beam computed tomography (CBCT). RESULTS: CBCT measurements were consistently higher than USD measurements, with the difference ranging from 0.13 mm to 0.21 mm. No statistically significant difference was noted between the repeated CBCT measurements at the right central incisor (bias = 0.05 mm; 95% CI = -0.01, 0.11; p = 0.104). Although the respective results for the left incisor statistically indicated that the measurements were not exactly replicated, the magnitude of the point estimate was small and not clinically significant (bias = 0.06 mm; 95% CI = 0.01, 0.11; p = 0.014). Small differences between CBCT measurements made by the 2 examiners at the left central incisor (bias = 0.06 mm; 95% CI = 0.01, 0.11; p = 0.014) were detected. However, this difference was minor and also not clinically significant. The respective analysis on the right incisor showed no statistically significant difference (bias = 0.05 mm; 95% CI = -0.01, 0.11; p = 0.246). CONCLUSIONS: Based on reproducibility, CBCT imaging for gingival thickness assessment proved to be as reliable as ultrasound determination. However, CBCT consistently yielded higher values, albeit at a marginal level, than did the ultrasound device.

Handheld optical coherence tomography for clinical assessment of dental plaque and gingiva.

SIGNIFICANCE: Optical coherence tomography (OCT) offers high spatial resolution and contrast for imaging intraoral structures, yet few studies have investigated its clinical feasibility for dental plaque and gingiva imaging in vivo. Furthermore, the accessibility is often limited to anterior teeth due to bulky imaging systems and probes. AIM: A custom-designed, handheld probe-based, spectral-domain OCT system with an interchangeable attachment was developed to assess dental plaque and gingival health in a clinical setting. APPROACH: Healthy volunteers and subjects with gingivitis and sufficient plaque were recruited. The handheld OCT system was operated by trained dental hygienists to acquire images of dental plaque and gingiva at various locations and after one-week use of oral hygiene products. RESULTS: The handheld OCT can access premolars, first molars, and lingual sides of teeth to visualize the plaque distribution. OCT intensity-based texture analysis revealed lower intensity from selected sites in subjects with gingivitis. The distribution of the dental plaque after one-week use of the oral hygiene products was compared, showing the capability of OCT as a longitudinal tracking tool. CONCLUSIONS: OCT has a strong potential to display and assess dental plaque and gingiva in a clinical setting. Meanwhile, technological challenges remain to perform systematic longitudinal tracking and comparative analyses.

Invasion of the mandible in gingivobuccal complex cancers: Histopathological analysis of routes of tumour entry and correlation with preoperative assessment.

OBJECTIVES: To determine the most accurate imaging modality predicting mandibular invasion in gingivobuccal (GB) complex cancers. To determine patterns of invasion and routes of tumour entry into the mandible by detailed histopathologic analysis. MATERIAL AND METHODS: Prospective observational study of GB Complex cancers juxtaposed with the mandible clinically necessitating some form of mandibular resection. Orthopantomogram (OPG), Multi Detector Computed Tomography (MDCT), DENTA scan and Single Photon Emission Computed Tomography scan (SPECT) were performed after which the patient was subjected to surgery. Histopathological assessment was systematically performed with serial cuts of the mandibular segment. RESULTS: Of 70 patients, MDCT was the most accurate with area under curve (AUC) of 0.833. OPG, DENTA and SPECT had AUC of 0.714, 0.786 and 0.738 respectively. Mean calculated difference of involved height was -0.025 cm by MDCT (p value 0.87), -0.2 cm by OPG (p value 0.09) and 0.12 by DENTA scan (p value 0.41). Mean difference of involved length was -0.51 cm (p value 0.08) and -1.02 cm (p value 0.04) for MDCT and OPG respectively. 50% of tumour invasion was through the occlusal route while large tumours demonstrated multiple routes of entry. CONCLUSION: -Gingivobuccal complex cancers are homogenous with respect to mandibular invasion, preferred route of tumour entry being the occlusal surface. -Multidetector CT scan is fairly accurate in detecting mandibular involvement and predicting extent of involvement. -Oncological safety can be achieved by positioning the bone cuts corresponding to the adjacent soft tissue margins in segmental mandibulectomy.

A noninvasive imaging and measurement using optical coherence tomography angiography for the assessment of gingiva: An in vivo study.

Gingiva is the soft tissue that surrounds and protects the teeth. Healthy gingiva provides an effective barrier to periodontal insults to deeper tissue, thus is an important indicator to a patient's periodontal health. Current methods in assessing gingival tissue health, including visual observation and physical examination with probing on the gingiva, are qualitative and subjective. They may become cumbersome when more complex cases are involved, such as variations in gingival biotypes where feature and thickness of the gingiva are considered. A noninvasive imaging technique providing depth-resolved structural and vascular information is necessary for an improved assessment of gingival tissue and more accurate diagnosis of periodontal status. We propose a three-dimensional (3D) imaging technique, optical coherence tomography (OCT), to perform in situ imaging on human gingiva. Ten volunteers (five male, five female, age 25-35) were recruited; and the labial gingival tissues of upper incisors were scanned using the combined use of state-of-the-art swept-source OCT and OCT angiography (OCTA). Information was collected describing the 3D tissue microstructure and capillary vasculature of the gingiva within a penetration depth of up to 2 mm. Results indicate significant structural and vascular differences between the two extreme gingival biotypes (ie, thick and thin gingiva), and demonstrate special features of vascular arrangement and characteristics in gingival inflammation. Within the limit of this study, the OCT/OCTA technique is feasible in quantifying different attributes of gingival biotypes and the severity of gingival inflammation.

Assessment of Periodontal Biotype in a Young Chinese Population using Different Measurement Methods.

Periodontal biotype is used to describe the morphological characteristics of periodontal tissues and is closely related to periodontal health and prognosis of many dental treatments. This study was undertaken to explore the periodontal biotype distribution in a young Chinese population and to evaluate the accuracy of different methods for gingival thickness (GT) measurement. A total of 372 teeth from 31 periodontally healthy subjects were included. GT was measured simultaneously by probe transparency, transgingival probing and cone-beam computed tomography (CBCT). Some other anatomic parameters, including crown width/crown length ratio, attached gingival width, labial bone thickness and papilla volume were recorded for periodontal biotype classification. As found by probe transparency, the gingivae of 222 teeth (59.68%) were thick, while those of 150 teeth (40.32%) were thin. The mean GT of included subjects was 1.03 ± 0.31 mm as measured by transgingival probing and 1.03 ± 0.24 mm as measured by CBCT. Four groups were identified by cluster analysis. Thick-flap biotype, average-scalloped biotype, average-flap biotype and thin-scalloped biotype comprised 137 teeth (36.83%), 96 teeth (25.81%), 39 teeth (10.48%) and 100 teeth (26.88%), respectively. These results demonstrate that the most common periodontal biotype in this young Chinese population was the thick-flap type with low aesthetic risk.

Optical coherence tomography assessment of gingival epithelium inflammatory status in periodontal - Systemic affected patients.

INTRODUCTION: Optical coherence tomography (OCT) is an imaging tool used in various medical fields (ophthalmology, dermatology), which allows the observation of morphological particularities on the surface of tissues or internal constructive details of about 2-3mms in depth. In periodontology, it has been used as an experimental tool for periodontal pocket analysis (depth, calculus deposits) but not for the assessment of periodontal inflammation in the gingival tissues, which has been the subject of our in-vitro study. MATERIAL AND METHOD: Gingival samples were collected from three types of patients: patients with periodontal disease; patients with periodontal disease and a systemic comorbidity; periodontal and systemic healthy patients. The samples were scanned with an OCT light beam, resulting two-dimensional images of the gingival tissue (full thickness epithelium and partial connective tissue). The images were assessed using dedicated software, which allowed the quantification of pixels on a given segment in the epithelium. The average pixel densities were then calculated for each patient group and statistically analyzed. RESULTS: The resulted pixel densities were highest for the control group samples, while the lowest pixel densities were found in samples originating from periodontal patients with diabetes mellitus. For the other possible periodontal comorbidity, chronic hepatitis C, image assessment also exhibited lower pixel densities than those of the periodontal group, suggesting that this condition could also have an added effect on the tissular changes induced by periodontal disease. CONCLUSION: OCT has proven that in an in-vitro environment it can be a useful tool for the assessment of periodontal inflammation in gingival samples of periodontal patients. In terms of inflammatory tissular changes observed by OCT analysis, chronic hepatitis C could be regarded as possible periodontal disease's comorbidity.

Assessment of the test-retest reliability of human gingival blood flow measurements by Laser Speckle Contrast Imaging in a healthy cohort.

OBJECTIVE: The reliability of gingival blood flow measured by Laser Speckle Contrast Imaging is unknown. Our aim was to investigate the effect of factors inherent in oral mucosa measurement on intra-day and inter-day reliability. METHODS: Gingival blood flow was measured in seventy healthy subjects. First, measurements were obtained by varying the incidence angle of imaging, using a lip retractor. Second, 3 snapshots were taken with closure of the mouth in-between, and lips were retracted by a dental mirror. These were repeated 1 week later. Third, snapshots were taken either by direct view or using a mirror. Reliability was assessed based on coefficient of variation. RESULTS: Unlike retraction of the lips and the mirror, the incidence angle had an effect on mean blood flow. The coefficient of variation within a subject was 6.4% with the mouth constantly open. With retraction, the intra-session, and the inter-day coefficient of variation were 8.3% and 10.5%, respectively. The coefficient of variation was 11.9% by alternating direct and indirect imaging. CONCLUSIONS: Laser Speckle Contrast Imaging has good short- and long-term reliability regardless of lip retraction or an indirect view. This technique seems to be appropriate for the long-term clinical non-invasive follow-up of gingival microcirculation.

A Semi-automatic Algorithm for Preliminary Assessment of Labial Gingiva and Alveolar Bone Thickness of Maxillary Anterior Teeth.

PURPOSE: Soft and hard tissue volumes are critical for implant placement and long-term stability. Although the literature has adequately addressed tissue biotypes of Western populations, pertinent information about Asian populations is limited. This study aimed to evaluate the soft and hard tissue profiles of the maxillary anterior teeth of the Taiwanese population using a semi-automatic algorithm. MATERIALS AND METHODS: Cone beam computed tomography images of 11 adults with well-aligned maxillary anterior teeth were overlaid with those of cast models, based on the tooth crowns manually outlined by two independent observers. Each tooth was digitally trisected mesiodistally and apicocoronally. The thicknesses of the labial gingiva and alveolar bone were measured using a customized software program. RESULTS: No obvious difference between the observers was noted regarding the dimension of tooth crowns. The average thicknesses of the labial gingiva, the labial alveolar bone, and the palatal alveolar bone were 1.76 ± 0.11 mm, 1.02 ± 0.12 mm, and 1.80 ± 0.31 mm, respectively, with no significant differences between teeth. All parameters were thicker in the apical region than in the cervical region, and the alveolar bone was thinner in the midlabial region of incisors than in the interproximal regions. The thinnest areas were the midcervical compartment of the right central incisor (0.53 ± 0.33 mm) for the labial gingiva, the midcervical compartment of the right lateral incisor (0.23 ± 0.10 mm) for the labial alveolar bone, and the mesiocervical compartment of the left central incisor (0.33 ± 0.09 mm) for the palatal alveolar bone. CONCLUSION: This study presents an objective and comprehensive methodology for evaluating the soft and hard tissue profiles of maxillary anterior teeth and may be of value for presurgical planning for immediate implant placement. The results suggest that profiles of the Taiwanese subjects are similar to profiles of Western populations.

Premolar autotransplantation in juvenile dentition: quantitative assessment of vertical bone and soft tissue growth.

OBJECTIVE: Premolar autotransplantation represents an effective therapeutic option for the treatment of juvenile dentition with either aquired or congenital hypodontia. The objective of this prospective clinical study was to quantitatively assess bone and soft tissue levels after autogenous premolar transplantation by clinical and radiographic parameters. STUDY DESIGN: In the study, 26 premolars were transplanted in 20 patients after traumatic tooth loss (n = 16) or congenital aplasia (n = 10) in the anterior maxilla. Based on standardized photographic documentation, the relative soft tissue level was measured compared to the healthy adjacent teeth. Radiographic findings included evaluation of root resorption, pulp canal obliteration, and relative bone height. RESULTS: Average survival rate of transplanted premolars (n = 26) was 100% over a follow-up period of 29 months (range 10-60 months). The relative soft tissue level significantly increased by +1.1 mm (P < .01). Radiographs showed a tendency toward vertical bone growth. Continuous root development and signs of pulpal healing were observed postoperatively in 18 transplants (69.2%). CONCLUSIONS: Autogenous premolar transplantation represents a safe method to ensure functional and aesthetic rehabilitation in the anterior maxilla irrespective of the nature of tooth loss.

Influence of lip retraction on the cone beam computed tomography assessment of bone and gingival tissues of the anterior maxilla.

OBJECTIVE: To evaluate the influence of lip retraction on cone beam computed tomography (CBCT) assessment of bone and gingival tissues on the labial surface of the anterior maxilla. STUDY DESIGN: A retrospective study was conducted using measurements of bone and gingival tissues collected from 120 maxillary incisors. The thicknesses of the bone and gingival tissues of different regions were measured on CBCT images, with and without a lip retractor. The thicknesses of the gingival tissues obtained from CBCT were correlated with measurements performed by clinical probing. RESULTS: The thickness of bone in the more cervical region presented a higher mean value for exams performed with a lip retractor (P = .021). The thickness of bone found a significant correlation with the thickness of the gingiva (P ≤ .020) with a lip retractor in CBCT exams. The thickness of the gingival tissue obtained from CBCT scans with lip retraction found significant correlations with those obtained clinically (P ≤ .001). CONCLUSIONS: The use of lip retractors is a simple and reliable practice that allows the measurement of gingival tissues on CBCT images. This practice can exempt a patient from an invasive clinical procedure for measuring the thickness of the gingival tissue for implant cases of the anterior segment.

Assessment of gingival biotype and facial hard/soft tissue dimensions in the maxillary anterior teeth region using cone beam computed tomography.

OBJECTIVE: This study sought to assess the relationship between facial gingival and bone dimensions in maxillary anterior teeth region using cone beam computed tomography (CBCT). DESIGN: This study assessed 621 maxillary anterior teeth in 144 patients. In the sagittal plane, facial bone thickness (BT) and gingival thickness (GT) were measured at the crestal level and at 2, 4 and 6mm apical to the cementoenamel junction (CEJ). The dentogingival complex (DGC) dimensions and the distance from the CEJ to bone crest were also measured on CBCT scans. To determine the gingival biotype, GT at 2mm apical to the gingival margin was measured and GT <1.5mm was categorized as thin while GT ≥1.5mm was categorized as thick. The data were analyzed using SPSS version 21 via repeated measures ANOVA and the Cochrane's Q, chi-square and independent samples t-tests. RESULTS: The BT around the maxillary central and lateral incisors and canine teeth at 4 and 6mm apical to the CEJ was significantly different in thick and thin gingival biotypes (P<0.05). The mean GT at 2 and 4mm apical to the CEJ was significantly different around central and lateral incisors (P<0.05). Thickness of crestal bone was significantly different between the two gingival biotypes around central and lateral incisors (P<0.05). CONCLUSION: The two gingival biotypes had significantly different mean BT; different biotypes and their relationship to BT varied around anterior maxillary teeth.

In vivo assessment of periodontal structures and measurement of gingival sulcus with Optical Coherence Tomography: a pilot study.

There has been increasing interest on the development of clinically acceptable, more sensitive and specific methods for non-invasive diagnosis in Periodontics. In this pilot study, the performance of an Optical Coherence Tomography (OCT) system in imaging periodontal structures in humans was evaluated. Gingival sulcus depth measurements were obtained and compared with traditional probes. In total, 445 sites of 23 periodontally healthy individuals were measured by 3 instruments: North Carolina manual probe, Florida automated probe and OCT at 1325 nm. To obtain quantitative measurements from OCT images, the gingival refractive index was also determined. Discomfort/pain perception and the duration of examinations were compared among the instruments. The analysis of OCT images allowed the identification of relevant anatomic dental and periodontal regions. The average sulcus depth measured by OCT, 0.85 ± 0.27 mm and 0.87 ± 0.28 mm, was lower than the values obtained by manual and automated probing. Discomfort/pain were prevalent for traditional probes, which are invasive methods, than for the non-invasive OCT technique. OCT has the potential to be a reliable tool for in vivo periodontal tissues evaluation and for reproducible sulcus depth measurements in healthy sites. Further technological advances are required to reduce the procedure time and promote evaluation of posterior oral regions. Photonic assessment of periodontal tissue with OCT (top) in a clinical environment, showing tooth/gingiva features (bottom).