Efficient pullulan production by Aureobasidium pullulans using cost-effective substrates.

In this study, cost-effective substrates such as cassava starch, corn steep liquor (CSL) and soybean meal hydrolysate (SMH) were used for pullulan production by Aureobasidium pullulans CCTCC M 2012259. The medium was optimized using response surface methodology (RSM) and artificial neural network (ANN) approaches, and analysis of variance indicated that the ANN model achieved higher prediction accuracy. The optimal medium predicted by ANN was used to produce high molecular weight pullulan in high yield. SMH substrates increased both biomass and pullulan titer, while CSL substrates maintained higher pullulan molecular weight. Results of kinetic parameters, key enzyme activities and intracellular uridine diphosphate glucose contents revealed the physiological mechanism of changes in pullulan titer and molecular weight using different substrates. Economic analysis of batch pullulan production using different substrates was performed, and the cost of nutrimental materials for CSL and SMH substrates was decreased by 46.1% and 49.9%, respectively, compared to the control using glucose and yeast extract as substrates, which could improve the competitiveness of pullulan against other polysaccharides in industrial applications.

Cost-effective optimized scleroglucan production by Sclerotium rolfsii ATCC 201126 at bioreactor scale. A quantity-quality assessment.

Exopolysaccharide (EPS) secretion by Sclerotium rolfsii ATCC 201126 in submerged cultures, already identified as high-osmolarity responsive, was assessed by reducing C-source without compromising EPS yields. A designed medium with 80 g sucrose L-1 (MOPT80) was tested at 3 L-bioreactor scale at different temperature, agitation, aeration and pH (uncontrolled vs. controlled) values. Optimal operative conditions (200 rpm, 28 °C, 0.5 vvm and initial pH -pHi- 4.5) were validated, as well as the possibility to work at pHi 5.5 to reduce biomass production. Purified EPSs produced in MOPT80 at optimal and other valid operative conditions exhibited refined grade (<1 % proteins and ash, 3-4 % reducing sugars, 87-99 % total sugars). EPS purity, MW and rheological parameters led to discourage pH controlled at 4.5. Relatively constant MW (6-8 × 106 Da) and outstanding viscosifying ability were found. Polyphasic EPS analysis (titre, purity, macromolecular features and rheological fitness) would support to properly select production conditions.

Rapid Assessment of Cell Wall Polymer Distribution and Surface Topology of Arabidopsis Seedlings.

The deposition and modulation of constituent polymers of plant cell walls are profoundly important events during plant development. Identification of specific polymers within assembled walls during morphogenesis and in response to stress conditions represents a major goal of plant cell biologists. Arabidopsis thaliana is a model organism that has become central to research focused on fundamental plant processes including those related to plant wall dynamics. Its fast life cycle and easy access to a variety of mutants and ecotypes of Arabidopsis have stimulated the need for rapid assessment tools to probe its wall organization at the cellular and subcellular levels. We describe two rapid assessment techniques that allow for elucidation of the cell wall polymers of root hairs and high-resolution analysis of surface features of various vegetative organs. Live organism immunolabeling of cell wall polymers employing light microscopy and confocal laser scanning microscopy can be effectively performed using a large microplate-based screening strategy (see Figs. 1 and 2). Rapid cryofixation and imaging of variable pressure scanning electron microscopy also allows for imaging of surface features of all portions of the plant as clearly seen in Fig. 3.

Comparative assessment of the Euglena gracilis var. saccharophila variant strain as a producer of the ß-1,3-glucan paramylon under varying light conditions.

Euglena gracilis Z and a "sugar loving" variant strain E. gracilis var. saccharophila were investigated as producers of paramylon, a ß-1,3-glucan polysaccharide with potential medicinal and industrial applications. The strains were grown under diurnal or dark growth conditions on a glucose-yeast extract medium supporting high-level paramylon production. Both strains produced the highest paramylon yields (7.4-8 g · L-1 , respectively) while grown in the dark, but the maximum yield was achieved faster by E. gracilis var. saccharophila (48 h vs. 72 h). The glucose-to-paramylon yield coefficient Ypar/glu  = 0.46 ± 0.03 in the E. gracilis var. saccharophila cultivation, obtained in this study, is the highest reported to date. Proteomic analysis of the metabolic pathways provided molecular clues for the strain behavior observed during cultivation. For example, overexpression of enzymes in the gluconeogenesis/glycolysis pathways including fructokinase-1 and chloroplastic fructose-1,6-bisphosphatase (FBP) may have contributed to the faster rate of paramylon accumulation in E. gracilis var. saccharophila. Differentially expressed proteins in the early steps of chloroplastogenesis pathway including plastid uroporphyrinogen decarboxylases, photoreceptors, and a highly abundant (68-fold increase) plastid transketolase may have provided the E. gracilis var. saccharophila strain an advantage in paramylon production during diurnal cultivations. In conclusion, the variant strain E. gracilis var. saccharophila seems to be well suited for producing large amounts of paramylon. This work has also resulted in the identification of molecular targets for future improvement of paramylon production in E. gracilis, including the FBP and phosophofructokinase 1, the latter being a key regulator of glycolysis.

Potentially Immunogenic Contaminants in Wood-Based and Bacterial Nanocellulose: Assessment of Endotoxin and (1,3)-ß-d-Glucan Levels.

Knowledge gaps in the biosafety data of the nanocellulose (NC) for biomedical use through various routes of administration call for closer look at health and exposure evaluation. This work evaluated the potentially immunogenic contaminants levels, for example, endotoxin and (1,3)-ß-d-glucan, in four representative NCs, that is, wood-based NCs and bacterial cellulose (BC). The hot-water extracts were analyzed with ELISA assays, HPSEC-MALLS, GC, and NMR analysis. Varying levels of endotoxin and (1,3)-ß-d-glucan contaminats were found in these widely used NCs. Although the ß-(1,3)-d-glucan was not detected from the NMR spectra due to the small extract samples amount (2-7 mg), the anomerics and highly diastereotopic 6-CH2 signals may suggest the presence of ß-(1,4)-linkages with ß-(1,6) branching in the polysaccharides of NCs' hot-water extracts, which were otherwise not detectable in the enzymatic assay. In all, the article highlights the importance of monitoring various water-soluble potentially immunogenic contaminants in NC for biomedical use.

Xyloglucan in the primary cell wall: assessment by FESEM, selective enzyme digestions and nanogold affinity tags.

Xyloglucan has been hypothesized to bind extensively to cellulose microfibril surfaces and to tether microfibrils into a load-bearing network, thereby playing a central role in wall mechanics and growth, but this view is challenged by newer results. Here we combined high-resolution imaging by field emission scanning electron microscopy (FESEM) with nanogold affinity tags and selective endoglucanase treatments to assess the spatial location and conformation of xyloglucan in onion cell walls. FESEM imaging of xyloglucanase-digested cell walls revealed an altered microfibril organization but did not yield clear evidence of xyloglucan conformations. Backscattered electron detection provided excellent detection of nanogold affinity tags in the context of wall fibrillar organization. Labelling with xyloglucan-specific CBM76 conjugated with nanogold showed that xyloglucans were associated with fibril surfaces in both extended and coiled conformations, but tethered configurations were not observed. Labelling with nanogold-conjugated CBM3, which binds the hydrophobic surface of crystalline cellulose, was infrequent until the wall was predigested with xyloglucanase, whereupon microfibril labelling was extensive. When tamarind xyloglucan was allowed to bind to xyloglucan-depleted onion walls, CBM76 labelling gave positive evidence for xyloglucans in both extended and coiled conformations, yet xyloglucan chains were not directly visible by FESEM. These results indicate that an appreciable, but still small, surface of cellulose microfibrils in the onion wall is tightly bound with extended xyloglucan chains and that some of the xyloglucan has a coiled conformation.

Economic co-production of poly(malic acid) and pullulan from Jerusalem artichoke tuber by Aureobasidium pullulans HA-4D.

BACKGROUND: poly(L-malic acid) (PMA) is a water-soluble polyester with many attractive properties in medicine and food industries, but the high cost of PMA fermentation has restricted its further application for large-scale production. To overcome this problem, PMA production from Jerusalem artichoke tubers was successfully performed. Additionally, a valuable exopolysaccharide, pullulan, was co-produced with PMA by Aureobasidum pullulans HA-4D. RESULTS: The Jerusalem artichoke medium for PMA and pullulan co-production contained only 100 g/L hydrolysate sugar, 30 g/L CaCO3 and 1 g/L NaNO3. Compared with the glucose medium, the Jerusalem artichoke medium resulted in a higher PMA concentration (114.4 g/L) and a lower pullulan concentration (14.3 g/L) in a 5 L bioreactor. Meanwhile, the activity of pyruvate carboxylase and malate dehydrogenas was significantly increased, while the activity of α-phosphoglucose mutase, UDP-glucose pyrophosphorylase and glucosyltransferase was not affected. To assay the economic-feasibility, large-scale production in a 1 t fermentor was performed, yielding 117.5 g/L PMA and 15.2 g/L pullulan. CONCLUSIONS: In this study, an economical co-production system for PMA and pullulan from Jerusalem artichoke was developed. The medium for PMA and pullulan co-production was significantly simplified when Jerusalem artichoke tubers were used. With the simplified medium, PMA production was obviously stimulated, which would be associated with the improved activity of pyruvate carboxylase and malate dehydrogenas.

Bacterial glucans: production, properties, and applications.

Bacterial glucans have aroused increasing interest in commercial applications in the food and pharmaceutical sectors. A number of bacterial glucans have been reported over recent decades, and their structure, production, and functional properties have been extensively studied. In this paper, we review recent researches on bacterial glucans, with emphasis on the production, physical and chemical properties, and the new developments in food, biomedical, pharmaceutical, and other industrial applications.

Overproduction of cellulase by Trichoderma reesei RUT C30 through batch-feeding of synthesized low-cost sugar mixture.

Cellulase is a prerequisite for the bioconversion of lignocellulosic biomass, but its high cost presents the biggest challenge. In this article, low-cost mixture was produced from glucose through the transglycosylation reaction catalyzed by ß-glucosidase for cellulase overproduction by Trichodema reesei RUT C30. As a result, cellulase titer of 90.3FPU/mL, which was more than 10 folds of that achieved with lactose as inducer, was achieved at 144h. Meanwhile, cellulase productivity was drastically increased to 627.1FPU/L/h, at least 3-5 folds higher than previously reported by the fungal species. The crude enzyme was further tested by hydrolyzing NaOH-pretreated corn stover with 15% solid loading, and 96.6g/L glucose was released with 92.6% sugar yield at 96h and 44.8g/L ethanol was obtained.

Novel peritoneal dialysis solutions--what are the clinical implications?

Novel low-glucose degradation products (GDP) peritoneal dialysis (PD) fluids have an improved biocompatibility profile as compared to standard fluids. Clinical studies suggest that their use may be associated with favorable clinical outcomes; however, large prospective randomized studies addressing clinical endpoints such as patient and technique survival are presently lacking. Nevertheless, as their only disadvantage is their cost, they are already being used as the standard treatment by many adult PD centers. This policy is also in line with the latest recommendations from the European Pediatric Dialysis Working Group which advises that conventional, single-chamber PD solutions should be replaced by PD solutions with reduced GDP content. The use of icodextrin, the glucose polymer PD solution, is recommended for patients with high or high-average peritoneal transport and/or ultrafiltration problems who otherwise would resort to hypertonic (3.86% glucose) exchanges.

Investigation of enzyme formulation on pretreated switchgrass.

This work studied the benefits of adding different enzyme cocktails (cellulase, xylanase, ß-glucosidase) to pretreated switchgrass. Pretreatment methods included ammonia fiber expansion (AFEX), dilute-acid (DA), liquid hot water (LHW), lime, lime+ball-milling, soaking in aqueous ammonia (SAA), and sulfur dioxide (SO(2)). The compositions of the pretreated materials were analyzed and showed a strong correlation between initial xylan composition and the benefits of xylanase addition. Adding xylanase dramatically improved xylan yields for SAA (+8.4%) and AFEX (+6.3%), and showed negligible improvement (0-2%) for the pretreatments with low xylan content (dilute-acid, SO(2)). Xylanase addition also improved overall yields with lime+ball-milling and SO(2) achieving the highest overall yields from pretreated biomass (98.3% and 93.2%, respectively). Lime+ball-milling obtained an enzymatic yield of 92.3kg of sugar digested/kg of protein loaded.

Carbohydrates--the renewable raw materials of high biotechnological value.

Carbohydrates are the potential biomolecules derived from nature. Their molecular diversity has led to a bewildering variety of species, structures and characteristics all performing a large array of functions of great significance. Biologically they are vital as message (immunological) carriers, physiologically they are useful as energy (nutritional) reserves, and technologically they are needed for altering the texture and consistency (functional) of foods. Recent advances in glycobiology have opened up a new understanding of the role of sugars in biology and medicine. Noncellulosic beta-(1-3)-linked D-glucans, a group of polysaccharides found as constituents of fungi, algae, and higher plants, exhibit many interesting properties, depending on their molecular conformation. They are excellent 'biological response modifiers' and show significant immunomodulatory activities. They elicit a variety of host defense biological responses, for example, potent antitumor activity. On the other hand, the mixed-linkage ((1-3/1-4)-beta-linked) glucans are important constituents of cereal cell walls, where they perform properties of physiological importance, such as water holding capacity, porosity, and plasticity, which are useful at different stages of growth/development of plants. Of late, carbohydrate-based therapeutics are becoming the promise against many chronic diseases of today and tomorrow. Some of the characteristic features, structural attributes, functional significance, and applications of a selected few carbohydrate species are the subject matter of this review.

A toxicological assessment of curdlan.

Curdlan was approved for use by the FDA in December 1996 as a formulation aid, processing aid, stabilizer and thickener or texturizer for use in food. It has been evaluated for safety by a series of animal studies and in vitro tests including acute, subchronic and chronic toxicity studies and reproduction and carcinogenicity studies. In addition, nutritional studies in rodents and tolerance and metabolic studies in man have been carried out. The only effects seen in these studies were reductions in weight gain at the higher dietary concentrations due to the replacement of part of the diet by curdlan, which is calorifically inert. No evidence of any toxicity or carcinogenicity nor of any effects on reproduction was seen, although there was an effect on body weights of the pups with the 15% diet, which was shown in additional studies to be due to the reduced food availability in the animals at this dose level. There was no evidence of effects on the nutritional status of the animals nor on the absorption of minerals. This reviews the available toxicological data on curdlan.