Assessment of chlorine and hydrogen peroxide on airborne bacteria: Disinfection efficiency and induction of antibiotic resistance.

Airborne pathogens severely threaten public health worldwide. Air disinfection is essential to ensure public health. However, excessive use of disinfectants may endanger environmental and ecological security due to the residual disinfectants and their by-products. This study systematically evaluated disinfection efficiency, induction of multidrug resistance, and the underlying mechanisms of disinfectants (NaClO and H2O2) on airborne bacteria. The results showed that airborne bacteria were effectively inactivated by atomized NaClO (>160 µg/L) and H2O2 (>320 µg/L) after 15 min. However, some bacteria still survived after disinfection by atomized NaClO (0-80 µg/L) and H2O2 (0-160 µg/L), and they exhibited significant increases in antibiotic resistance. The whole-genome sequencing of the resistant bacteria revealed distinct mutations that were responsible for both antibiotic resistance and virulence. This study also provided evidences and insights into possible mechanisms underlying the induction of antibiotic resistance by air disinfection, which involved intracellular reactive oxygen species formation, oxidative stress responses, alterations in bacterial membranes, activation of efflux pumps, and the thickening of biofilms. The present results also shed light on the role of air disinfection in inducing antibiotic resistance, which could be a crucial factor contributing to the global spread of antibiotic resistance through the air.

Assessment of dimensional stability of novel VPES impression material at different time intervals with standard disinfectants.

BACKGROUND: Vinyl polyether silicone (VPES) is a novel impression biomaterial made of a combination of vinyl polysiloxane (VPS) and polyether (PE). Thus, it is significant to assess its properties and behaviour under varied disinfectant test conditions. This study aimed to assess the dimensional stability of novel VPES impression material after immersion in standard disinfectants for different time intervals. METHODS: Elastomeric impression material used -medium body regular set (Monophase) [Exa'lence GC America]. A total of 84 Specimens were fabricated using stainless steel die and ring (ADA specification 19). These samples were distributed into a control group (n=12) and a test group (n=72). The test group was divided into 3 groups, based on the type of disinfectant used - Group-A- 2% Glutaraldehyde, Group-B- 0. 5% Sodium hypochlorite and Group-C- 2% Chlorhexidine each test group was further divided into 2 subgroups (n=12/subgroup) based on time intervals for which each sample was immersed in the disinfectants - subgroup-1- 10 mins and Subgroup 2- 30 mins. After the impression material was set, it was removed from the ring and then it was washed in water for 15 seconds. Control group measurements were made immediately on a stereomicroscope and other samples were immersed in the three disinfection solutions for 10 mins and 30 mins to check the dimensional stability by measuring the distance between the lines generated by the stainless steel die on the samples using a stereomicroscope at x40 magnification. RESULTS: The distance measured in the control group was 4397.2078 µm and 4396.1571 µm; for the test group Group-A- 2% Glutaraldehyde was 4396.4075 µm and 4394.5992 µm; Group-B- 0. 5% Sodium hypochlorite was 4394.5453 µm and 4389.4711 µm Group-C- 2% Chlorhexidine was 4395.2953 µm and 4387.1703 µm respectively for 10 mins and 30 mins. Percentage dimensional change was in the range of 0.02 - 0.25 for all the groups for 10 mins and 30 mins. CONCLUSIONS: 2 % Glutaraldehyde is the most suitable disinfectant for VPES elastomeric impression material in terms of dimensional stability and shows minimum dimensional changes as compared to that of 2% Chlorhexidine and 0.5% Sodium hypochlorite.

Assessment of microorganisms in drinking water disinfected by catalytic ozonation with fluorinated ceramic honeycomb and NaClO disinfectants under laboratory and pilot conditions.

While sodium hypochlorite (NaClO) has long been used to disinfect drinking water, concerns have risen over its use due to causing potentially hazardous byproducts. Catalytic ozonation with metal-free catalysts has attracted increasing attention to eliminate the risk of secondary pollution of byproducts in water treatment. Here, we compared the disinfection efficiency and microbial community of catalytic ozone with a type of metal-free catalyst fluorinated ceramic honeycomb (FCH) and NaClO disinfectants under laboratory- and pilot-scale conditions. Under laboratory conditions, the disinfection rate of catalytic ozonation was 3∼6-fold that of ozone when the concentration of Escherichia coli was 1 × 106 CFU/ml, and all E. coli were killed within 15 s. However, 0.65 mg/L NaClO retained E. coli after 30 min using the traditional culturable approach. The microorganism inactivation results of raw reservoir water disinfected by catalytic ozonation and ozonation within 15 s were incomparable based on the cultural method. In pilot-scale testing, catalytic ozonation inactivated all environmental bacteria within 4 min, while 0.65 mg/L NaClO could not achieve this success. Both catalytic ozonation and NaClO-disinfected methods significantly reduced the number of microorganisms but did not change the relative abundances of different species, i.e., bacteria, viruses, eukaryotes, and archaea, based on metagenomic analyses. The abundance of virulence factors (VFs) and antimicrobial resistance genes (ARGs) was detected few in catalytic ozonation, as determined by metagenomic sequencing. Some VFs or ARGs, such as virulence gene 'FAS-II' which was hosted by Mycobacterium_tuberculosis, were detected solely by the NaClO-disinfected method. The enriched genes and pathways of cataO3-disinfected methods exhibited an opposite trend, especially in human disease, compared with NaClO disinfection. These results indicated that the disinfection effect of catalytic ozone is superior to NaClO, this finding contributed to the large-scale application of catalytic ozonation with FCH in practical water treatment.

Comment on "Detection of exposed phosgene in household bleach: development of a selective and cost-effective sensing tool" by S. Saha and P. Sahoo, Environ. Sci.: Processes Impacts, 2023, 25, 1144.

In the absence of an identified source of carbon, the reported formation of phosgene from bleach powder is questioned. Interferences and confounding effects other than those investigated by the authors may have led to artifactual results.

Bioburden assessment of necrotic teeth disinfected with sodium hypochlorite, diode laser, and photodynamic therapy using flow cytometry-a randomized double-blinded clinical trial.

This study aimed to comparatively evaluate the disinfecting potential of sodium hypochlorite, diode laser, and photodynamic therapy in non-vital teeth with or without periapical rarefaction. Forty-five patients with the diagnosis of pulp necrosis with apical rarefaction were randomly assigned to three groups (n = 15) based on the disinfection protocol. Access cavities were prepared and pre-instrumentation microbial samples were taken using a paper point. Working length determination followed by cleaning and shaping with rotary files was performed. The canals were lubricated with ethylenediaminetetraacetic acid (EDTA) during instrumentation and finally rinsed with copious amounts of saline. Canals in group 1 were irrigated with 5 mL of 5.25% NaOCl, those in group 2 received irradiation with 808-nm diode laser (30 s, 7W), and those in group 3 were soaked with methylene blue photosensitizer (5 min) before irradiation with 660-nm diode laser (3 min). Post-disinfection microbial samples were collected using a paper point. Pre- and post-disinfection live bacterial counts were analyzed using a flow cytometer. The data were statistically analyzed using one-way ANOVA and Student's t-test. Comparison of pre-instrumentation mean live bacterial count showed no significant difference between the groups (p > 0.05). The mean live bacterial count post-disinfection was 41.07%, 46.99%, and 34.45% in groups 1-3 respectively. A significant reduction in the bacterial count was seen following disinfection in all the groups (p < 0.05). It can be concluded that both diode laser and photodynamic therapy were equally effective as 5.25% NaOCl in reducing the bioburden in root canals. TRIAL REGISTRATION: CTRI/2018/03/012667.

In vitro assessment of antimicrobial potential of low molecular weight chitosan and its ability to mechanically reinforce and control endogenous proteolytic activity of dentine.

AIMS: Chitosan-based biomaterials exhibit several properties of biological interest for endodontic treatment. Herein, a low molecular weight chitosan (CH) solution was tested for its antimicrobial activity against Enterococcus faecalis (E. faecalis) and effects on dentine structure. METHODOLOGY: The root canal of 27 extracted uniradicular teeth were biomechanically prepared, inoculated with a suspension of E. faecalis and randomly assigned to be irrigated with either 5.25% sodium hypochlorite (NaClO), 0.2% CH or sterile ultrapure water (W). Bacteriologic samples were collected from root canals and quantified for of E. faecalis colony-forming units (CFUs). The effectiveness of CH over E. faecalis biofilms was further measured using the MBEC Assay®. Additionally, dentine beams and dentine powder were obtained, respectively, from crowns and roots of 20 extracted third molars. Dentine samples were treated or not with 17% EDTA and immersed in either CH or W for 1 min. The effects of CH on dentine structure were evaluated by assessment of the modulus of elasticity, endogenous proteolytic activity and biochemical modifications. RESULTS: The number of E. faecalis CFUs was significantly lower for samples irrigated with CH and NaClO. No significant differences were found between CH and NaClO treatments. Higher modulus of elasticity and lower proteolytic activity were reported for dentine CH-treated specimens. Chemical interaction between CH and dentine was observed for samples treated or not with EDTA. CONCLUSIONS: Present findings suggest that CH could be used as an irrigant during root canal treatment with the triple benefit of reducing bacterial activity, mechanically reinforcing dentine and inhibiting dentine proteolytic activity.

A comprehensive health effects assessment of the use of sanitizers and disinfectants during COVID-19 pandemic: a global survey.

COVID-19 has affected all aspects of human life so far. From the outset of the pandemic, preventing the spread of COVID-19 through the observance of health protocols, especially the use of sanitizers and disinfectants was given more attention. Despite the effectiveness of disinfection chemicals in controlling and preventing COVID-19, there are critical concerns about their adverse effects on human health. This study aims to assess the health effects of sanitizers and disinfectants on a global scale. A total of 91,056 participants from 154 countries participated in this cross-sectional study. Information on the use of sanitizers and disinfectants and health was collected using an electronic questionnaire, which was translated into 26 languages via web-based platforms. The findings of this study suggest that detergents, alcohol-based substances, and chlorinated compounds emerged as the most prevalent chemical agents compared to other sanitizers and disinfectants examined. Most frequently reported health issues include skin effects and respiratory effects. The Chi-square test showed a significant association between chlorinated compounds (sodium hypochlorite and per-chlorine) with all possible health effects under investigation (p-value <0.001). Examination of risk factors based on multivariate logistic regression analysis showed that alcohols and alcohols-based materials were associated with skin effects (OR, 1.98; 95%CI, 1.87-2.09), per-chlorine was associated with eye effects (OR, 1.83; 95%CI, 1.74-1.93), and highly likely with itching and throat irritation (OR, 2.00; 95%CI, 1.90-2.11). Furthermore, formaldehyde was associated with a higher prevalence of neurological effects (OR, 2.17; 95%CI, 1.92-2.44). Furthermore, formaldehyde was associated with a higher prevalence of neurological effects (OR, 2.17; 95%CI, 1.92-2.44). The use of sodium hypochlorite and per-chlorine also had a high chance of having respiratory effects. The findings of the current study suggest that health authorities need to implement more awareness programs about the side effects of using sanitizers and disinfectants during viral epidemics especially when they are used or overused.

Assessment of acute inhalation toxicity of citric acid and sodium hypochlorite in rats.

BACKGROUND: Citric acid (CA) and sodium hypochlorite (NaOCl) have been used to disinfect animals to protect them against avian influenza and foot-and-mouth disease. OBJECTIVES: We performed a good laboratory practice (GLP)-compliant animal toxicity study to assess the acute toxic effects of CA and NaOCl aerosol exposure in Sprague-Dawley rats. METHODS: Groups of five rats per sex were exposed for 4 h to four concentrations of the two chemicals, i.e., 0.00, 0.22, 0.67, and 2.00 mg/L, using a nose-only exposure. After a single exposure to the chemicals, clinical signs, body weight, and mortality was observed during the observation period. On day 15, an autopsy, and then gross findings, and histopathological analysis were performed. RESULTS: After exposure to CA and NaOCl, body weight loss was observed but recovered. Two males died in the CA 2.00 mg/L group and, two males and one female died in the 2.00 mg/L NaOCl group. In the gross findings and histopathological analysis, discoloration of the lungs was observed in the CA exposed group and inflammatory lesions with discoloration of the lungs were observed in the NaOCl exposed group. These results suggest that the lethal concentration 50 (LC50) of CA is 1.73390 mg/L for males and > 1.70 mg/L for females. For NaOCl, the LC50 was 2.22222 mg/L for males and 2.39456 mg/L for females. CONCLUSIONS: The Globally Harmonized System is category 4 for both CA and NaOCl. In this study, the LC50 results were obtained through a GLP-based acute inhalation toxicity assessment. These results provide useful data to reset safety standards for CA and NaOCl use.

Assessment of Irrigant Agitation Devices in Simulated Closed and Open Root Canal Systems.

INTRODUCTION: The in vitro efficacy of irrigant activation devices has not been contrasted to their safety. This was attempted in this study using apically closed versus patent simulated root canal systems in epoxy resin models, with the latter featuring a simulated periapical lesion. METHODS: All 72 models had 2 joining canals connected by an isthmus, which was filled with dentin debris. The simulated periapical lesion was filled with colored gelatin in the 36 respective models. Canals were irrigated with 1.3% sodium hypochlorite. Samples were divided into 4 subgroups per system (n = 9): conventional irrigation, sonic low (EndoActivator; Dentsply Sirona, Charlotte, NC) and high frequency (EDDY; VDW, Munich, Germany), and ultrasonic agitation of the irrigant (always applying 3 cycles of 20 seconds). The total cleared surface areas (mm2) in the simulated isthmus and periapical lesion were compared between systems and devices using parametric tests (P < .05). RESULTS: The cleaning of the isthmus was more effective in the apically open compared with the closed systems and was also significantly influenced by the agitation method (P < .001). In the closed systems, EDDY and ultrasonic agitation achieved the significantly (P < .05) best cleaning of the isthmus. In the open systems, ultrasonic agitation showed the single best result (P < .05). EDDY caused by far the highest and ultrasonic agitation the lowest dissolution of the gelatin in the simulated periapical lesion. CONCLUSIONS: Under the conditions of this study, ultrasonic agitation of a previously administered sodium hypochlorite irrigant was more laterally targeted and thus safer and more effective than sonic agitation methods.

Comparative Assessment of Qmix as Endodontic Irrigant on Reversal of Bond Strength in Teeth Subjected to Irradiation: An Scanning Electron Microscope Study.

AIM: The aim of this current study was to compare and evaluate the reversal efficacy of Qmix and chitosan-based irrigation materials quantitatively through the assessment of the push-out bond strength of bioceramic sealer employing universal testing machine and to qualitatively analyze the sealer/dentin interface by scanning electron microscope (SEM) in the teeth subjected to fractioned radiation. MATERIALS AND METHODS: Ninety single-rooted straight human maxillary central incisors were randomly divided into six groups (n = 15) where in three groups comprise Chitosan, Qmix, and EDTA/sodium hypochlorite which were not exposed to irradiation while other three groups were challenged with irradiation protocols. Root canals were prepared with ProTaper universal system and all the samples were irrigated according to the final irrigation protocols and obturated with bioceramic sealers. Dentin slices were prepared with 1 mm thickness from each root third for the estimation of bond strength of sealers to dentin. Qualitative assessment of the sealer-dentin interface was done by scanning electron microscopy. Bond strength data were scrutinized by independent t-test and failure modes using the Chi-square test. RESULTS: Significantly lower bond strength (p <0.05) was recorded after irradiation compared with nonirradiated group. To quantify the results irrigation protocols, Qmix had highest bond strength followed by chitosan and EDTA/sodium hypochlorite group irrespective of irradiation status. Bond strength values reduced after irradiation in all root thirds irrespective of the irrigation materials. Scanning electron microscope images revealed traces of repair process for Qmix-based irrigation materials than the chitosan-based materials for both irradiated and nonirradiated specimens. CONCLUSION: All the irrigation materials employed in this study had good bond strength. The specimen irrigated with Qmix had comparatively higher bond strength than the chitosan-based materials. The teeth subjected to irradiation challenge were associated with a decrease in the push-out bond strength of sealers to intraradicular dentin with formation of more gaps and fewer tags at the sealer/dentin interface. CLINICAL SIGNIFICANCE: Selection of ideal irrigation protocols still remains a challenge for the clinical practitioners, and this study explored the utilization of novel materials used for irrigation, especially in the teeth subjected to radiation.

Assessment of Surface Disinfection Effectiveness of Decontamination System COUNTERFOG® SDR-F05A+ Against Bacteriophage ɸ29.

The experience of COVID19 pandemic has demonstrated the real concern of biological agents dispersed in the air and surfaces environments. Therefore, the need of a fast and large-scale disinfection method has arisen for prevention of contagion. COUNTERFOG® is an innovative technology developed for large-scale decontamination of air and surfaces. The objective of this study is to assess experimentally the effectiveness of COUNTERFOG® in disinfecting viral-contaminated surfaces. We also aim to measure the necessary time to disinfect said surfaces. Stainless steel surfaces were contaminated with bacteriophage φ29 and disinfected using COUNTERFOG® SDR-F05A+, which uses a sodium hypochlorite solution at different concentrations and for different exposure times. A log reduction over 6 logs of virus titer is obtained in 1 min with 1.2% sodium hypochlorite when the application is direct; while at a radial distance of 5 cm from the point of application the disinfection reaches a reduction of 5.5 logs in 8 min. In the same way, a higher dilution of the sodium hypochlorite concentration (0.7% NaOCl) requires more exposure time (16 min) to obtain the same log reduction (> 6 logs). COUNTERFOG® creates, in a short time and at a distance of 2 m from the point of application, a thin layer of disinfectant that covers the surfaces. The selection of the concentration and exposure time is critical for the efficacy of disinfection. These tests demonstrate that a concentration between 0.7- 1.2% sodium hypochlorite is enough for a fast and efficient ɸ29 phage inactivation. The fact that ɸ29 phage is more resistant to disinfection than SARS-CoV-2 sustains this disinfection procedure.

In vitro assessment of interaction between lidocaine hydrochloride and irrigating solutions on root canal dentin: a scanning electron microscope study / Evaluación in vitro de la interacción entre el clorhidrato de lidocaína y las soluciones de irrigación en la dentina del conducto radicular: un estudio con microscopio electrónico de barrid

Aim: To investigate the precipitate formed from the interaction between 2% lidocaine hydrochloride with adrenaline (LA) with 2.5% sodium hypochlorite (NaOCl) and 0.2% chitosan nanoparticles on root canal dentin, using scanning electron microscopy (SEM). Material and Methods: Sixty mandibular premolars were decoronated, and the root length standardised. The specimens were randomly distributed into the following groups: Group 1 (control): 2% LA mixed with sterile water without root canal instrumentation, Group 2: 2% LA with 2.5% NaOCl in water without root canal instrumentation, and Group 3: 2% LA with 0.2% chitosan nanoparticles in water without root canal instrumentation. Teeth specimens were split and subjected to SEM analysis at cervical, middle, and apical root thirds. On observing precipitate formation in Group 2, 10 premolars were decoronated and treated with 2% LA and 2.5% NaOCl and subjected to root canal instrumentation. Results: Group 1 and Group 3 showed patent dentinal tubules and no precipitate formation. Group 2 showed precipitate blocking dentinal tubules in all the three sections, and the precipitate could not be removed completely after cleaning and shaping. Conclusion: NaOCl forms an insoluble precipitate on interaction with local anaesthetic solution that cannot be removed after chemo-mechanical preparation. Chitosan nanoparticles do not form any such precipitate and show patent dentinal tubules. Hence, chitosan can be used as a flushing irrigant.

Objetivo: Investigar el precipitado formado a partir de la interacción entre el clorhidrato de lidocaína al 2% con adrenalina (LA), el hipoclorito de sodio al 2,5% (NaOCl) y nanopartículas de quitosano al 0,2% en la dentina del conducto radicular, mediante microscopía electrónica de barrido (SEM). Material y Métodos: Se decoraron 60 premolares mandibulares y se estandarizó la longitud de la raíz. Los especímenes se distribuyeron aleatoriamente en los siguientes grupos: Grupo 1 (control): 2% la que fue mezclado con agua estéril sin instrumentación del conducto radicular, Grupo 2: 2% LA con 2,5% de NaOCl sin instrumentación del conducto radicular y Grupo 3: 2 % LA con 0,2% de nanopartículas de quitosano sin instrumentación del conducto radicular. Las muestras de dientes se dividieron y se sometieron a análisis SEM en los tercios radiculares cervical, medio y apical. Al observar la formación de precipitado en el Grupo 2, 10 premolares fueron decorados y tratados con LA al 2% y NaOCl al 2,5% y sometidos a instrumentación de conductos radiculares. Resultado: El Grupo 1 y el Grupo 3 mostraron túbulos dentinarios permeables y sin formación de precipitados. El grupo 2 mostró precipitado que bloqueaba los túbulos dentinarios en las tres secciones, y el precipitado no se pudo eliminar por completo después de limpieza y conformación. Conclusión: el NaOCl forma un precipitado insoluble al interactuar con la solución anestésica local que no se puede eliminar después de la preparación quimiomecánica. Las nanopartículas de quitosano no forman ningún precipitado de este tipo y muestran túbulos dentinarios permeables. Por lo tanto, el quitosano se puede utilizar como irrigante para el lavado.

Optimization of sporulation and purification methods for sporicidal efficacy assessment on Bacillus spores.

Validating the efficacy of sporicidal agents is a critical step in current good manufacturing practices for disinfection requirements. A limitation is that the poor quality of spores can lead to false positive sporicidal results. The aim of this study was to explore optimal sporulation and purification methods in Bacillus spores. Spores of 7 Bacillus strains were produced in 5 different sporulation media. After density centrifugation, spore yields were measured by phase-contrast microscopy and enumeration assays. Effects of purification methods including heat, sonication and lysozyme, and maturation on spore qualities were determined by sodium hypochlorite sporicidal assay. Difco sporulation media was identified as the preferred sporulation medium for 4 out of 7 tested Bacillus strains. Sporulation rates in B. cereus, B. sphaericus, and B. thuringiensis were higher at 30°C than the rates at 37°C at a difference of 5%, 65%, and 20%, respectively. Bacillus licheniformis favored Mn2+-amended 10% Columbia Broth at 37°C for sporulation with 40-72% higher sporulation rates than other media. The maximum sporulation rates of B. cereus and B. thuringiensis were observed on double-strength Schaeffer's-glucose broth. All studied purification methods improved the spore purity with strain variations. However, intense heat (80°C for 20 min) and lysozyme (100 µg/mL) treatment impaired the spore quality of specific Bacillus strains by sensitizing them against sodium hypochlorite. The length of the maturation period had an impact on the spore resistance, and the most optimal maturation periods ranged from 7 to 21 days in Bacillus strains. The results of this study will pave the way for further evaluation of the sporicidal activity of disinfectants.

Laser-fluorescence assessment of sodium hypochlorite quenching reversal agents on human dentine.

BACKGROUND: Laser-fluorescence diagnostic technology for real-time clinical assessment of residual bacteria could help assist in determining the endpoints for root canal debridement. Sodium hypochlorite (NaOCl) can however quench fluorescence and lead to false low reading. This study aims to evaluate various antioxidant for their ability to recover quenched fluorescence in dentine treated with NaOCl. METHODS: Human dentine fluorescence was measured using 655 nm laser at baseline and again after a 2 min application of 4% NaOCl. The putative recovery agents were then applied, and the fluorescence measured after 5, 10, 20, 30 and 60 min. Recovery from quenching was also assessed using laser confocal scanning microscopy (CLSM) with a bound tetracycline fluorophore using 488 nm excitation. RESULTS: A 5 min application of vitamin E oil or buffered 2% lignocaine solution (1:80,000 adrenaline) was effective in regaining quenched fluorescence within the following 5 mins. Distilled water, sodium thiosulfate, unbuffered 2% lignocaine with 1:80000 adrenaline and phosphate buffered saline were less effective, and of equal performance. Ascorbic acid and butylated hydroxyanisole were not effective and had deleterious effects on the levels of dentine fluorescence. CLSM provided confirmation of recovery from quenched fluorescence using vitamin E oil. CONCLUSION: Based on these findings, reversal agents should be employed when assessing the fluorescence of dentine that has been exposed to NaOCl or other quenching agents.

Qualitative Assessment of the Surface Topographic Changes of XP-endo Shaper and TruNatomy files after exposure to Sodium Hypochlorite and Ethylenediaminetetraacetic Acid.

OBJECTIVE: TruNatomy and XP-endo Shaper are recently introduced file systems showing increased fatigue resistance rate. The present study aims to evaluate the surface topographic changes and nickel (Ni) and titanium (Ti) elemental loss of XP-endo Shaper (XPS) and TruNatomy (TN) files on exposure to conventionally used root canal irrigants; [5.25% sodium hypochlorite (NaOCl) and 17% ethylenediaminetetraacetic acid (EDTA)] at a 10 minute time frame using atomic force microscopy (AFM) and energy dispersion X-ray spectroscopy (EDX) analytical techniques. METHODS: Twelve samples for each of XPS (30/.04 taper) and TN (26/.04 taper; prime) instruments were dynamically exposed to 5.25% NaOCl, 17% EDTA separately for 10 minutes and in combination of 5.25% NaOCl (8 minutes)+17% EDTA (2 minutes) for a total of 10 minutes. Post exposure, the files were subjugated to AFM and EDX analysis. Independent t test and one-way ANOVA were used for statistical analysis, and the level of significance was set at 0.05. RESULTS: XPS and TN showed a significant increase of surface roughness (Ra) and roughness mean square (RMS) on exposure to various irrigants (P<0.05) using AFM analysis. Increased overall roughness was observed with TN in comparison to XPS (P<0.05). Elements Ni and Ti loss was found in both XPS and TN files using EDX analysis. Both files exhibited Ni and Ti loss with the loss of Ni content higher for TN after exposure to 17% EDTA. Loss of Ti was seen for both files on exposure to a combination of 5.25% NaOCl+17% EDTA. CONCLUSION: After exposure to root canal irrigants, the surface roughness was lesser in XPS compared to TN files. 17% EDTA caused significantly higher surface roughness in both file systems when compared to 5.25% NaOCl. TN exhibited overall higher elemental (Ni and Ti) loss on exposure to 17% EDTA and 5.25% NaOCl+17% EDTA in comparison to XPS files.

Chlorhexidine and Sodium Hypochlorite Provide Similar Antimicrobial Effect in Root Canal Disinfection.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Ruksakiet K, Hanák L, Farkas N, Hegyi P, Sadaeng W, Czumbel LM, Sang-Ngoen T, Garami A, Mikó A, Varga G, Lohinai Z. Antimicrobial Efficacy of Chlorhexidine and Sodium Hypochlorite in Root Canal Disinfection: A Systematic Review and Meta-analysis of Randomized Controlled Trials. J Endod. 2020 Aug;46(8):1032-1041.e7. doi: 10.1016/j.joen.2020.05.002. Epub 2020 May 12. PMID: 32413440. SOURCE OF FUNDING: The Hungarian Human Resources Development Operational Program, the Higher Education Excellence Program of the Hungarian Ministry of Human Capacities to the Therapy Research Module of Semmelweis University, National Research, Development and Innovation Office, Hungarian Scientific Research Fund and the Economic Development and Innovation Operative Programme Grant. TYPE OF STUDY/DESIGN: Systematic review with meta-analysis.

Household Disinfection Interventions to Prevent Cholera Transmission: Facilitators, Barriers, Training, and Evidence Needs.

There are two common household disinfection interventions to prevent interhousehold transmission of cholera: household spraying, whereby a team disinfects cholera patients' households, and household disinfection kits (HDKs), whereby cleaning materials are provided to cholera patients' family members. Currently, both interventions lack evidence, and international agencies recommend HDK distribution; however, household spraying remains widely implemented. To understand this disconnect, we conducted 14 key informant interviews with international and national responders and a study in Haiti assessing HDK efficacy using two training modules including 20 household surveys and 327 surfaces samples before and after cleaning. During interviews, 80% of the international-level informants discussed evidence gaps for both interventions, and 60% preferred HDKs. Conversely, no national-level informants knew what an HDK was; therefore, they all preferred spraying. Informants discussed behavior changes, bleach perceptions, and implementation as facilitators and/or barriers to implementing both interventions. In households, training with demonstrations regarding the use of HDK led to increased reductions of Escherichia coli (P < 0.001) and Vibrio spp. (P < 0.001) on surfaces after participants cleaned the household compared with a hygiene promotion session only. These results emphasize the gap between the current international-level policy and the realities of cholera response programs, highlight the need for evidence to align household disinfection recommendations, and underscore the importance of the dissemination and training of responders and affected populations regarding methods to prevent intrahousehold cholera transmission.

Assessment of the cytotoxic effects and chemical composition of the insoluble precipitate formed from sodium hypochlorite and chlorhexidine gluconate.

AIM: To investigate (1) the cytotoxic potential of the brown precipitate (BP) formed with sodium hypochlorite (NaOCl) and chlorhexidine gluconate (CHX), using both a small animal model of Caenorhabditis elegans (C. elegans) and cultured human gingival fibroblasts; and (2) the chemical composition of BP using Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). METHODOLOGY: Brown precipitate was obtained by mixing equal volumes of 6% NaOCl and 2% CHX and separating the BP from clear supernatant by centrifugation. The brown precipitate was weighed and solubilized in dimethyl sulfoxide for cytotoxicity experiments. The cytotoxic effect of BP was assessed using C. elegans larvae and primary immortalized human gingival fibroblasts-hTERT (hTERT-hNOF) cells. Various dilutions of BP (25 ng/µL-150 ng/µL), supernatant (0.15% v/v), NaOCl (1:100-1:1000 dilutions of 6% NaOCl) or CHX (1:500-1:1000 dilutions of 2% CHX) along with vehicle control (0.5% v/v ethanol and 0.15% v/v DMSO) or untreated control (growth medium) were tested on C. elegans larvae and hTERT-hNOF cells. Viability was assessed in C. elegans larvae using stereomicroscopy and in hTERT-hNOF cells using dehydrogenase-based colorimetric assay. ToF-SIMS was used to assess the chemical composition of BP in comparison with CHX and para-chloroaniline (PCA). The C. elegans and cell line data were analysed using Log-Rank test and Student's t-test, respectively (p < .05). RESULTS: BP-75 ng/µL and BP-150 ng/µL were significantly more toxic to C. elegans larvae than the untreated, vehicle, supernatant or CHX treatment groups (p < .0001). Similarly, in hTERT-hNOF cells, BP-50 ng/µL, BP-75 ng/µL and BP-150 ng/µL induced significant cytotoxicity within 2 h compared with untreated, vehicle, supernatant and CHX treatments (p < .05). ToF-SIMS analysis of BP revealed ion composition characteristic of both CHX and the carcinogen PCA. CONCLUSIONS: Brown precipitate was toxic in both C. elegans larvae and hTERT-hNOF cells. The ToF-SIMS analysis of BP revealed ions characteristic of CHX and PCA that could account for the toxicities observed in C. elegans larvae and human gingival fibroblasts. Because of the insoluble and toxic nature of BP, consecutive use of CHX and NaOCl irrigants should be avoided in root canal treatment.

Assessing the efficiency of low-cost cleaning methods for diatoms from intertidal sediment samples.

This study aims to compare the effectiveness of several low-cost reagents in obtaining high-quality diatom slides for microphytobenthos research. We evaluated the performance of eight reagents in sediment samples of beach intertidal zones. For each of the tested reagents, different pre-treatment conditions (pre-washed; non-washed) and three different temperatures (room temperature at 26 °C, 60 °C, and 100 °C) were also evaluated. For each treatment (combinations between reagents, temperatures, and pre-treatment conditions), we counted diatoms cells that met the criteria necessary for taxonomic identification (Whole/Half frustules or valves without cell material) in 30 randomly chosen fields of view in definitive preparations made from the treated samples. We also compared the treatments regarding species richness and diversity observed in the definitive preparations. The reagents influenced more the conditions of diatoms cells than the temperature and pre-treatment. H2O2, HNO3, NaClO were the methods that had the best performance in relation to the number of identifiable items. The six treatments with H2O2 presented similar amounts of identifiable items, regardless of pre-treatment and temperature. HNO3 presented a higher number of identifiable items in non-washed and pre-washed treatments at 60 °C and non-washed at 100 °C. NaClO had its best performance the following treatments: non-washed at room temperature and non-washed and pre-washed at 60 °C. H2O2 and HNO3 also showed better results for diatom species richness and diversity, followed by NaClO. The use of H2O2 was more robust since it obtained good results regardless of temperature and pre-treatments and should be preferred. HNO3 and NaClO should be used only with the appropriate temperatures, and pre-washing should be avoided.