Ultra-Wideband Antennas for Biomedical Imaging Applications: A Survey.

Microwave imaging is an active area of research that has garnered interest over the past few years. The main desired improvements to microwave imaging are related to the performances of radiating systems and identification algorithms. To achieve these improvements, antennas suitable to guarantee demanding requirements are needed. In particular, they must operate in close proximity to the objects under examination, ensure an adequate bandwidth, as well as reduced dimensions and low production costs. In addition, in near-field microwave imaging systems, the antenna should provide an ultra-wideband (UWB) response. Given the relevance of the foreseen applications, many UWB antenna designs for microwave imaging applications have been proposed in the literature. In this paper, a comprehensive review of different UWB antenna designs for near-field microwave imaging is presented. The antennas are classified according to the manufacturing technology and radiative performances. Particular attention is also paid to the radiation mechanisms as well as the techniques used to reduce the size and improve the bandwidth.

Using prior information to enhance microwave tomography images in bone health assessment.

BACKGROUND: Osteoporosis is the major cause of bone weakness and fragility in more than 10 million people in the United States. This disease causes bone fractures in the hip or spine, which result in increasing the risk of disabilities or even death. The current gold standard in osteoporosis diagnostics, X-ray, although reliable, it uses ionizing radiations that makes it unfeasible for early and continuous monitoring applications. Recently, microwave tomography (MWT) has been emerging as a biomedical imaging modality that utilizes non-ionizing electromagnetic signals to screen bones' electrical properties. These properties are highly correlated to bones' density, which makes MWT to be an effective and safe alternative for frequent testing in osteoporosis diagnostics. RESULTS: Both the conventional and wearable simulated systems were successful in localizing the tibia and fibula bones in the enhanced MWT images. Furthermore, structure extraction of the leg's model from the blind MWT images had a minimal error compared to the original one (L2-norm: 15.60%). Under five sequentially incremental bone volume fraction (BVF) scenarios simulating bones' treatment procedure, bones were detected successfully and their densities were found to be inversely proportional to the real part of the relative permittivity values. CONCLUSIONS: This study paves the way towards implementing a safe and user-friendly MWT system that can be wearable to monitor bone degradation or treatment for osteoporosis cases. METHODS: An anatomically realistic finite-element (FE) model representing the human leg was initially generated and filled with corresponding tissues' (skin, fat, muscles, and bones) dielectric properties. Then, numerically, the forward and inverse MWT problems were solved within the framework of the finite-element method-contrast source inversion algorithm (FEM-CSI). Furthermore, image reconstruction enhancements were investigated by utilizing prior information about different tissues as an inhomogeneous background as well as by adjusting the imaging domain and antennas locations based on the prior structural information. In addition, the utilization of a medically approved matching medium that can be used in wearable applications, namely an ultrasound gel, was suggested. Additionally, an approach based on k-means clustering was developed to extract the prior structural information from blind reconstructions. Finally, the enhanced images were used to monitor variations in BVF.

An Active and Low-cost Microwave Imaging System for Detection of Breast Cancer Using Back Scattered Signal.

A defected ground antenna with dielectric reflector is designed and investigated for breast tumour diagnosis. Ultra-wide band resonance (3.1 to 10.6 GHz) is achieved by etching two slots and adding a narrow vertical strip in a patch antenna. A high dielectric constant substrate is added below the antenna, which shows remarkable effect on performance. Antenna performance is verified experimentally on an artificially fabricated breast tissue and tumour. Malignant tissue has different dielectric properties than the normal tissue which causes deviation in the scattered antenna power. Average value of backscattered signal variation and ground penetrating radar (GPR) algorithm is used to localize the tumour of radius 4mm in breast tissue.

Breast lesion detection through MammoWave device: Empirical detection capability assessment of microwave images' parameters.

MammoWave is a microwave imaging device for breast lesions detection, which operates using two (azimuthally rotating) antennas without any matching liquid. Images, subsequently obtained by resorting to Huygens Principle, are intensity maps, representing the homogeneity of tissues' dielectric properties. In this paper, we propose to generate, for each breast, a set of conductivity weighted microwave images by using different values of conductivity in the Huygens Principle imaging algorithm. Next, microwave images' parameters, i.e. features, are introduced to quantify the non-homogenous behaviour of the image. We empirically verify on 103 breasts that a selection of these features may allow distinction between breasts with no radiological finding (NF) and breasts with radiological findings (WF), i.e. with lesions which may be benign or malignant. Statistical significance was set at p<0.05. We obtained single features Area Under the receiver operating characteristic Curves (AUCs) spanning from 0.65 to 0.69. In addition, an empirical rule-of-thumb allowing breast assessment is introduced using a binary score S operating on an appropriate combination of features. Performances of such rule-of-thumb are evaluated empirically, obtaining a sensitivity of 74%, which increases to 82% when considering dense breasts only.

Microwave Bone Imaging: A Preliminary Investigation on Numerical Bone Phantoms for Bone Health Monitoring.

Microwave tomography (MWT) can be used as an alternative modality for monitoring human bone health. Studies have found a significant dielectric contrast between healthy and diseased human trabecular bones. A set of diverse bone phantoms were developed based on single-pole Debye parameters of osteoporotic and osteoarthritis human trabecular bones. The bone phantoms were designed as a two-layered circular structure, where the outer layer mimics the dielectric properties of the cortical bone and the inner layer mimics the dielectric properties of the trabecular bone. The electromagnetic (EM) inverse scattering problem was solved using a distorted Born iterative method (DBIM). A compressed sensing-based linear inversion approach referred to as iterative method with adaptive thresholding for compressed sensing (IMATCS) has been employed for solving the underdetermined set of linear equations at each DBIM iteration. To overcome the challenges posed by the ill-posedness of the EM inverse scattering problem, the L2-based regularization approach was adopted in the amalgamation of the IMATCS approach. The simulation results showed that osteoporotic and osteoarthritis bones can be differentiated based on the reconstructed dielectric properties even for low values of the signal-to-noise ratio. These results show that the adopted approach can be used to monitor bone health based on the reconstructed dielectric properties.

Development of an Anthropomorphic Phantom of the Axillary Region for Microwave Imaging Assessment.

We produced an anatomically and dielectrically realistic phantom of the axillary region to enable the experimental assessment of Axillary Lymph Node (ALN) imaging using microwave imaging technology. We segmented a thoracic Computed Tomography (CT) scan and created a computer-aided designed file containing the anatomical configuration of the axillary region. The phantom comprises five 3D-printed parts representing the main tissues of interest of the axillary region for the purpose of microwave imaging: fat, muscle, bone, ALNs, and lung. The phantom allows the experimental assessment of multiple anatomical configurations, by including ALNs of different size, shape, and number in several locations. Except for the bone mimicking organ, which is made of solid conductive polymer, we 3D-printed cavities to represent the fat, muscle, ALN, and lung and filled them with appropriate tissue-mimicking liquids. Existing studies about complex permittivity of ALNs have reported limitations. To address these, we measured the complex permittivity of both human and animal lymph nodes using the standard open-ended coaxial-probe technique, over the 0.5 GHz-8.5 GHz frequency band, thus extending current knowledge on dielectric properties of ALNs. Lastly, we numerically evaluated the effect of the polymer which constitutes the cavities of the phantom and compared it to the realistic axillary region. The results showed a maximum difference of 7 dB at 4 GHz in the electric field magnitude coupled to the tissues and a maximum of 10 dB difference in the ALN response. Our results showed that the phantom is a good representation of the axillary region and a viable tool for pre-clinical assessment of microwave imaging technology.

Joint microwave radiometry for inflammatory arthritis assessment.

OBJECTIVES: Increased in-depth joint temperature measured by the rapid, easy-to-perform microwave radiometry (MWR) method may reflect inflammation, even in the absence of clinical signs. We hypothesized that MWR is useful for RA and spondyloarthritis patients' assessment. METHODS: Clinical examination, joint ultrasound and/or MRI and MWR were performed in two independent patient-control cohorts (n = 243). RESULTS: Among single RA joints MWR performed best in the knee using ultrasound as reference, with 75% sensitivity-73% specificity for grey-scale synovitis score ⩾2, and 80% sensitivity-82% specificity for power Doppler positivity. A stronger agreement was evident between increased knee relative temperature (Δt) and power Doppler positivity (82%) than with clinical examination (76%). In a different patient cohort with painful knees, a knee Δt ⩽0.2 predicted power Doppler positivity with 100% positive and negative predictive values. A thermo-score summing 10 Δt values of three large and seven small RA joints (elbow, knee, ankle, wrist, four hand and two foot joints of the clinically dominant arm or hand and leg or foot) correlated with ultrasound scores of synovitis/tenosynovitis (all P < 0.001) and the 28-joint Disease Activity Score (DAS28) (P = 0.004). The agreement of the thermo-score with ultrasound-defined joint inflammation (82%) was stronger than with DAS28 (64%). The thermo-score improved significantly after 90 days of treatment in patients with active RA at baseline (P = 0.004). Using MRI as reference, Δt of sacroiliac joints could discriminate between spondyloarthritis patients with or without sacroiliitis with 78% sensitivity-74% specificity. CONCLUSION: In-depth increased MWR-derived joint temperature reflects both subclinical and clinically overt inflammation and may serve as a biomarker in arthritis.