Assessment of wild turmeric-based eco-friendly yellow natural bio-colorant for dyeing of wool fabric.

The current study has been designed to observe the coloring efficacy of wild turmeric-based natural yellowish colorant for wool dyeing under microwave (MW) treatments. Extracts and fabrics have been exposed to MW treatment for up to 10 min. Surface morphology and changes in the fabric's chemical nature before and after radiation have been studied through SEM and FTIR, respectively. The results obtained after a series of experiments show that using 45 mL of aqueous extract (pH = 5) in the presence of 1.5g/100mL of table salt as an exhausting agent at 75°C for 45 min has displayed outstanding color depth (K/S) onto microwave-treated wool fabric. On applying biomordants, it has been found that acacia extract (1.5%), pomegranate (2%), and pistachio extracts (1.5%) before dyeing, whereas acacia (1%), pomegranate (1%), and pistachio extracts (2%) after dyeing, have shown colorfast shades of high strength. Comparatively, salts of Al (1.5%) and Fe (1%), and T.A (2%) before dyeing, while salts of Al (1%) and Fe (1.5%) and T.A (1.5%) after dyeing, have given the best results. Generally, it has been originated that salt of Fe (1.5%) as a post-chemical mordant and pomegranate extract (1.5%) as a post-bio-mordant have displayed wonderful color strength. It very well may be inferred that MW treatment, being naturally protected, has just superior the varying strength of colorants on wool fabric. Adding biomordants has transformed the strategy into a more sustainable one.

Cost-effectively dissecting the genetic architecture of complex wool traits in rabbits by low-coverage sequencing.

BACKGROUND: Rabbit wool traits are important in fiber production and for model organism research on hair growth, but their genetic architecture remains obscure. In this study, we focused on wool characteristics in Angora rabbits, a breed well-known for the quality of its wool. Considering the cost to generate population-scale sequence data and the biased detection of variants using chip data, developing an effective genotyping strategy using low-coverage whole-genome sequencing (LCS) data is necessary to conduct genetic analyses. RESULTS: Different genotype imputation strategies (BaseVar + STITCH, Bcftools + Beagle4, and GATK + Beagle5), sequencing coverages (0.1X, 0.5X, 1.0X, 1.5X, and 2.0X), and sample sizes (100, 200, 300, 400, 500, and 600) were compared. Our results showed that using BaseVar + STITCH at a sequencing depth of 1.0X with a sample size larger than 300 resulted in the highest genotyping accuracy, with a genotype concordance higher than 98.8% and genotype accuracy higher than 0.97. We performed multivariate genome-wide association studies (GWAS), followed by conditional GWAS and estimation of the confidence intervals of quantitative trait loci (QTL) to investigate the genetic architecture of wool traits. Six QTL were detected, which explained 0.4 to 7.5% of the phenotypic variation. Gene-level mapping identified the fibroblast growth factor 10 (FGF10) gene as associated with fiber growth and diameter, which agrees with previous results from functional data analyses on the FGF gene family in other species, and is relevant for wool rabbit breeding. CONCLUSIONS: We suggest that LCS followed by imputation can be a cost-effective alternative to array and high-depth sequencing for assessing common variants. GWAS combined with LCS can identify new QTL and candidate genes that are associated with quantitative traits. This study provides a cost-effective and powerful method for investigating the genetic architecture of complex traits, which will be useful for genomic breeding applications.

Wool keratin - A novel dietary protein source: Nutritional value and toxicological assessment.

Keratin derived protein (KDP) was extracted from sheep wool using high pressure microwave technology and food acids and investigated for its potential as a novel dietary protein. The proximate composition, amino acid profile, element profile, in vitro cytotoxicity and digestibility of KDP were evaluated. Nutritive effects of KDP at 50% dietary supplementation were compared with a casein-based diet in a growing rat model for 95 days. Results indicate KDP to be rich in protein (86%), amino acid cysteine (8.8 g/100 g) and element selenium (0.29 µg/g). KDP was non-cytotoxic in vitro at ≤ 2 mg/mL concentration. There were no differences in the rat's weight gain compared to the control group (P > 0.05). Overall, the inclusion of the KDP in the diet was an effective substitute for casein protein at 50% and KDP has the potential to be used in the food industry as a novel dietary protein, free of fat and carbohydrate.

Assessment of reusable graphene wool adsorbent for the simultaneous removal of selected 2-6 ringed polycyclic aromatic hydrocarbons from aqueous solution.

The United States Environmental Protection Agency categorized polycyclic aromatic hydrocarbons (PAHs) as hazardous to humans upon acute and/or chronic exposure. This study investigated the simultaneous adsorption of several PAHs onto graphene wool (GW), thereby providing holistic insights into the competitive adsorption of PAHs onto graphene-based materials. SEM, TEM and FTIR provided evidence for the adsorption of PAHs and successful regeneration of the adsorbent accompanied by distinct morphological changes. Isotherm experiments revealed that adsorption of PAHs was significantly influenced by hydrophobic interactions between the sorbate and hydrophobic surface of GW. The Freundlich multilayer isotherm model best fit the experimental data obtained for both multi-component PAH and single-solute experiments as indicated by the Error Sum of Squares (SSE) obtained from nonlinear regression analysis. Experiments revealed that competitive adsorption had a limiting effect on the overall adsorption capacity as qmax and Kd were higher in single-solute than multi-component PAH experiments. The results suggest that partition distribution coefficients (Kd) between the solid-liquid interphase played a significant role in the overall adsorption and a positive correlation between Kd and LogKow of PAHs was established in single-solute experiments. Sorption-desorption experiments revealed that PAHs were adsorbed with a maximum removal efficiency of 100% at an optimum GW dosage of 2 g/L. Adsorption thermodynamics revealed that PAH adsorption onto GW is spontaneous and endothermic. The adsorbent was regenerated and reused for up to six times and its efficiency remained fairly constant.

Effect of dietary utilisation of sugarcane press mud on production performance of Muzaffarnagari lambs.

Sugarcane press mud (SPM) is one of the potential agro-industrial by-products available in India and research exploring its utilisation in small ruminant nutrition is scanty. In this direction, the present study evaluated the feasibility of dietary incorporation of SPM at different levels in a feeding trial lasting 180 days. A total of 21 Muzaffarnagari ram lambs were randomly distributed into three groups of seven each based on comparable body weight (11.70 ± 0.29 kg) and age (3-5 months) following a completely randomised design. The three dietary treatments were (1) SP0 (control), concentrate mixture without SPM; (2) SP10, concentrate mixture comprising 10% SPM and (3) SP20, concentrate mixture comprising 20% SPM on air-dry basis. The experimental lambs were offered weighed quantity of designated isonitrogenous (crude protein = 20.6%) and isoenergetic (metabolisable energy = 12.1 MJ/kg) concentrate mixture (coarse mash) and along with ad libitum wheat straw (threshed to 1-2-cm length) and a 9-day metabolism trial was conducted. Results revealed no significant (P > 0.05) differences in intake and digestibility of nutrients, nitrogen balance, nutritive value of diets, average daily gain, as well as feed conversion ratio among three groups. The serum concentration of triiodothyronine and tetraiodothyronine did not differ due to treatments. Likewise, wool yield and its quality, measured in terms of fibre diameter, medullation percentage and staple length were also comparable irrespective of dietary variation. Furthermore, the cost of concentrate mixture (Rs/day) was lower (P ≤ 0.05) in SP20 followed by SP10 as compared to group SP0. These findings suggested that SPM could be safely fed up to 20% level in the concentrate mixture for lambs substituting expensive traditional feed ingredients without negatively inflicting the performance of growing lambs.

Breeding objectives for sheep should be customised depending on variation in pasture growth across years.

Breeding programmes for livestock require economic weights for traits that reflect the most profitable animal in a given production system, which affect the response in each trait after selection. The profitability of sheep production systems is affected by changes in pasture growth as well as grain, meat and wool prices between seasons and across years. Annual pasture growth varies between regions within Australia's Mediterranean climate zone from low growth with long periods of drought to high growth with shorter periods of drought. Therefore, the objective of this study was to assess whether breeding objectives need to be adapted for regions, depending on how reliable the pasture growth is across years. We modelled farms with Merino sheep bred for wool and meat in 10 regions in Western Australia. Across these 10 regions, mean annual pasture growth decreased, and the CV of annual pasture growth increased as pasture growth for regions became less reliable. We calculated economic values for nine traits, optimising management across 11 years, including variation for pasture growth and wool, meat and grain prices between and within years from 2002 to 2012. These economic values were used to calculate responses to selection for each trait for the 10 regions. We identified two potential breeding objectives, one for regions with low or high reliability and the other for regions with medium reliability of pasture growth. Breeding objectives for high or low pasture growth reliability had more emphasis on live weight traits and number of lambs weaned. Breeding objectives for medium reliability of pasture growth had more emphasis on decreasing fibre diameter. Relative economic weights for fleece weight did not change across the regions. Regions with low or high pasture reliability had similar breeding objectives and response to selection, because the relationship between the economic values and CV of pasture growth were not linear for live weight traits and the number of lambs weaned. This non-linearity was caused by differences in distribution of pasture growth between regions, particularly during summer and autumn, when ewes were pregnant, with increases in energy requirements affecting the value of lambs weaned. In addition, increasing live weight increased the intake capacity of sheep, which meant that more poor quality pasture could be consumed during summer and autumn, which had more value in regions with low and high pasture reliability. We concluded that breeding values for sheep production systems should be customised depending on the reliability of pasture growth between years.

Assessment of health implications related to processing and use of natural wool insulation products.

This paper discusses possible health implications related to dust particles released during the manufacture of sheep's wool-based non-woven insulation material. Such insulation may replace traditional synthetic insulation products used in roofs, wall cavities, etc. A review of the literature concerning organic dusts in general and sheep's wool fiber summarizes dust exposure patterns, toxicological pathways and the hazards imposed by inhalation and explosion risk. This paper highlights a need for more research in order to refrain from overgeneralizing potential pulmonary and carcinogenic risks across the industries. Variables existing between industries such as the use of different wool types, processes, and additives are shown to have varying health effects. Within the final section of the paper, the health issues raised are compared with those that have been extensively documented for the rock and glass wool industries.

Guidelines for treatment of lice in sheep with long wool based on a model of the development of wool damage.

OBJECTIVE: This study used a model of the development of wool damage caused by lice in long wool to examine the conditions under which treatment of the sheep is advisable on an economic basis. METHODS: The model uses the proportion of a flock showing visible signs of rubbing and the number of days until the next shearing to compare the cost of treatment (product plus labour) with production losses because of the reduction in wool value caused by lice. From the model output, guidelines are provided to inform producers of the most cost-effective option for lice control. RESULTS: Under normal conditions, if there are any signs of rubbing ≥140 days before shearing, then treatment was the best option. If signs of wool damage are not observed until there are ≤70 days before shearing, then the most cost-effective option is to not treat at all. Between these two periods, the time period in which not treating is the most cost-effective option decreases as the number of sheep visibly affected by lice increases. At higher wool values (A$70/head vs A$35), the option to treat is brought forward approximately 25 days, whereas at a low wool value (A$17.50/head) the period in which no treatment is the most cost-effective is extended by approximately 25 days. Treating only the visibly affected sheep is the best option only for a very short time for all wool values and treatment costs. CONCLUSION: The model provides guidelines for control of lice in long wool to minimise the net cost of infestation and limit unnecessary pesticide use.

Assessment of body mapping sportswear using a manikin operated in constant temperature mode and thermoregulatory model control mode.

Regional sweating patterns and body surface temperature differences exist between genders. Traditional sportswear made from one material and/or one fabric structure has a limited ability to provide athletes sufficient local wear comfort. Body mapping sportswear consists of one piece of multiple knit structure fabric or of different fabric pieces that may provide athletes better wear comfort. In this study, the 'modular' body mapping sportswear was designed and subsequently assessed on a 'Newton' type sweating manikin that operated in both constant temperature mode and thermophysiological model control mode. The performance of the modular body mapping sportswear kit and commercial products were also compared. The results demonstrated that such a modular body mapping sportswear kit can meet multiple wear/thermal comfort requirements in various environmental conditions. All body mapping clothing (BMC) presented limited global thermophysiological benefits for the wearers. Nevertheless, BMC showed evident improvements in adjusting local body heat exchanges and local thermal sensations.

Biofunctional textiles prepared with liposomes: in vivo and in vitro assessment.

A sun filter, ethyl hexyl methoxycinnamate (EHMC) used as a tracer, was vehiculized by liposomes made up of internal wool lipids (IWL) or phosphatidylcholine (PC) and applied onto cotton and polyamide fabrics by exhaustion treatments. After topical applications of textiles on human volunteers, skin properties were evaluated by non-invasive biophysical techniques. Two methodologies based on percutaneous absorption were used to determine the content of the active principle penetration into the skin. PC liposomes showed more affinity for the fabric than IWL liposomes. Moreover, polyamide fabrics absorbed a slightly higher percentage of liposomes than cotton fabrics. A significantly higher amount of EHMC skin penetration was found when the biofunctional textiles were topically applied than when formulations were applied onto the skin. Moreover, the polyamide was the fibre with the highest released properties in all cases.

Calculating economic weights for sheep sire breeds used in different breeding systems.

The objective of this paper was to adapt gene-flow methodology for the calculation of economic weights (EW) for direct and maternal traits and trait components in sheep and to apply this methodology to the Suffolk breed in the Czech Republic. Computer programs were developed in which annual-lambing sheep production systems with purebreeding or partial terminal crossing were simulated. Using these programs, the EW for 12 production and functional traits were estimated for i) Suffolk sires whose sons were used both in purebreeding and in terminal crossing with the 4 dual-purpose breeds, Romanov, Sumavska, Romney, and Merinolandschaf; and ii) Suffolk sires used only for terminal crossing. For case (i), the EW were at first calculated separately for the purebreeding system and for the crossing systems with the 4 dual-purpose breeds in dam position. Compound EW for the general breeding goal for Suffolk were then estimated as weighted averages from the EW in the 5 subsystems. Standardized EW were calculated by multiplying the marginal EW with the genetic SD of the trait, and relative EW were defined as absolute values of the standardized EW expressed as percentage of the sum of the absolute values of the standardized EW over all traits. The 5 most important trait components for Suffolk sires whose sons were used both in purebreeding and in terminal crossing were (relative EW given in parentheses): the direct components of survival rate until weaning (21.0%), daily BW gain until weaning (14.1%), survival rate at birth (14.0%), the maternal component of survival rate until weaning (10.7%), and litter size at lambing (7.6%). There were only small differences between the relative EW calculated for the whole system with pure- and crossbreeding and the relative EW for the purebred system within the Suffolk breed. Therefore, selection of Suffolk rams using a selection index based on the compound EW is expected to be of high efficiency in all of the simulated breeding systems. Only direct traits were relevant for Suffolk sires used only for terminal crossing; the most important (range of relative EW calculated for the 4 crossing systems given in parentheses) were survival rate until weaning (35.2 to 36.5%), daily BW gain until weaning (24.2 to 26.3%), and survival rate at birth (23.7 to 24.8%).

A method for quantifying mixed goat cashmere and sheep wool.

Cashmere is a high-priced commodity in the world market. For financial gains, various interested parties often adulterate cashmere with cheap sheep wool. Here, we describe a method that can quickly extract mitochondrial DNA from natural or processed animal hair. We further designed two sets of TaqMan polymerase chain reaction (PCR) primers and probes that can react specifically to goat and sheep mitochondrial 12S ribosomal RNA (rRNA) genes. Using TaqMan PCR, we can not only distinguish between cashmere and wool but also quantify their contents in a cashmere/wool mixture. The method can be applied directly to examine the quality of cashmere products in the world markets.

Assessment of near-infrared path length in fibrous phantom and muscle tissue.

The first derivative of the pseudo-absorption spectrum of a water-loaded cotton wool (water-CW) phantom, which mimics muscle tissues, was used to determine the light path length in the near-infrared (NIR) region. The light path length increased as the density of the turbid medium decreased. It is independent of both water content in the range of 75-85% (by weight) and the diffuse reflecting reference used to determine the pseudo-absorbance. The path length determination procedure was verified by measurements of diffuse reflectance in chicken breast tissue for which the path length of 1.8 mm (differential path length factor, DPF = 2.1) was found to be similar to the path length of NIR light of 1.5-2.2 mm (DPF = 1.8-2.6) in a water-CW phantom of density similar to chicken breast. We conclude that the NIR light path length can serve as a characteristic of muscle tissue density.

Lanolin allergy: history, epidemiology, responsible allergens, and management.

Allergy to lanolin has been recognized by dermatologists for decades. This review summarizes the history, epidemiology, and allergenicity of lanolin and its derivatives. "The lanolin paradox" and the safety of pharmaceutical-grade lanolin products are also discussed.

[Correlations between SNP of LALBA gene and economic traits in Inner Mongolian white cashmere goat].

PCR-SSCP and DNA sequencing methods were conducted to detect single nucleotide polymorphism of alpha-lactalbumin (LALBA) gene in 452 Inner Mongolian white cashmere goats (IMWC). Correlations between SNP of goat LALBA gene and economic traits, e.g., cashmere yield, cashmere thickness, length and weight, were analyzed. The SSCP in P2 primer locus, which was caused by the point mutation M63868:g.1897T>C in the exon 3 of LALBA gene was detected. At this locus, the genotype TT and allele T were predominant in the IMWC population, which agreed with Hardy-Weinberg equilibrium. Moreover, there was a significant correlation between polymorphism of goat M63868:g.1897 locus and cashmere yield of IMWC (P=0.017). The individuals with genotype TC had more cashmere yield than those with geontype TT. Hence, genotype TC of LALBA gene can be used as a molecular marker for breeding superior cashmere yield in goat marker-assisted selection.

Cost-effectiveness of the Australian Medical Sheepskin for the prevention of pressure ulcers in somatic nursing home patients: study protocol for a prospective multi-centre randomised controlled trial (ISRCTN17553857).

BACKGROUND: Pressure ulcers are a major problem, especially in nursing home patients, although they are regarded as preventable and there are many pressure relieving methods and materials. One such pressure relieving material is the recently developed Australian Medical Sheepskin, which has been shown in two randomized controlled trials 12 to be an effective intervention in the prevention of sacral pressure ulcers in hospital patients. However, the use of sheepskins has been debated and in general discouraged by most pressure ulcer working groups and pressure ulcer guidelines, but these debates were based on old forms of sheepskins. Furthermore, nothing is yet known about the (cost-)effectiveness of the Australian Medical sheepskin in nursing home patients. The objective of this study is to assess the effects and costs of the use of the Australian Medical Sheepskin combined with usual care with regard to the prevention of sacral pressure ulcers in somatic nursing home patients, versus usual care only. METHODS/DESIGN: In a multi-centre randomised controlled trial 750 patients admitted for a primarily somatic reason to one of the five participating nursing homes, and not having pressure ulcers on the sacrum at admission, will be randomized to either usual care only or usual care plus the use of the Australian Medical Sheepskin as an overlay on the mattress. Outcome measures are: incidence of sacral pressure ulcers in the first month after admission; sacrum pressure ulcer free days; costs; patient comfort; and ease of use. The skin of all the patients will be observed once a day from admission on for 30 days. Patient characteristics and pressure risk scores are assessed at admission and at day 30 after it. Additional to the empirical phase, systematic reviews will be performed in order to obtain data for economic weighting and modelling. The protocol is registered in the Controlled Trial Register as ISRCTN17553857.

Genetic and phenotypic differences between isolates of Haemonchus contortus in Australia.

We believe this study is the first to consider the genetic and phenotypic divergence between isolates of Haemonchus contortus in Australia. Microsatellite markers have been used to investigate genetic divergence, whilst phenotypic divergence has been considered through individual worm morphology, isolate life history traits and the effect of isolates upon the host. The results are discussed in the context of the likely introduction of H. contortus to Australia, its recent isolation, and the characteristics of sheep and goat farming which might act to either isolate or distribute parasites. We conclude that there is significant observable genetic divergence between isolates of H. contortus in Australia. The divergence may have been under-estimated in this study due to a variety of factors. Phenotypic divergence is also observed, and potentially has significant implications for both economic losses due to haemonchosis on individual properties and for decisions regarding the regulation of stock movements in Australia.

Factors influencing the efficiency of a marker-assisted introgression programme in Merino sheep.

This study investigated a marker-assisted introgression programme in Australian Merino sheep. The goal was to introgress an allele with a large negative effect on fibre diameter into a Merino flock possessing medium average fibre diameter. The influence of two factors was explored: the strategy used to select animals from the purebred and backcross line for backcrossing purposes and the use of selection on background markers to accelerate the return to the purebred line's genome. The results were compared to introgression based on EBVs only. Introgression using EBVs only produced almost the same response in the dollar index as marker-based introgression methods. However, this study did not account for some of the costs associated with implementing the programmes, including the costs of phenotyping and genotyping. Given that the cost of measuring fibre diameter is low, it was concluded that introgression on EBVs only would be the preferred method since the marginal profit of marker-assisted introgression would not be large enough to cover the additional cost of genotyping. In marker-assisted introgression, reciprocal crossing of male and female selection candidates from the backcross and the purebred line was the most advantageous strategy from a practical and profit point of view. Selection for background markers was less profitable in this study than recovering the donor genome by selection on phenotype.

Breeding objectives for Targhee sheep.

Breeding objectives were developed for Targhee sheep under rangeland production conditions. Traits considered were those for which EPD were available from the US National Sheep Improvement Program and included direct and maternal effects on 120-d weaning weight (WW and MM, respectively); yearling weight (YW); yearling fleece weight, fiber diameter, and staple length; and percent lamb crop (PLC), measured as the number of lambs born per 100 ewes lambing. A bioeconomic model was used to predict the effects of a change of 1 additive SD in EPD for each trait, holding all other traits constant at their mean, on animal performance, feed requirements, feed costs, and economic returns. Resulting economic weightings were then used to derive selection indexes. Indexes were derived separately for 3 prolificacy levels (1.41, 1.55, and 1.70 lambs/ewe lambing), 2 triplet survival levels (50 and 67%), 2 lamb pricing policies (with or without discounting of prices for heavy feeder lambs), and 3 forage cost scenarios (renting pasture, purchasing hay, or reducing flock size to accommodate increased nutrient requirements for production). Increasing PLC generally had the largest impact on profitability, although an increase in WW was equally important, with low feed costs and no discounting of prices for heavy feeder lambs. Increases in PLC were recommended at all 3 prolificacy levels, but with low triplet survival the value of increasing PLC eventually declined as the mean litter size increased to approximately 2.15 lambs/ewe lambing and above. Increasing YW (independent of WW) increased ewe maintenance costs and reduced profitability. Predicted changes in breeding values for WW and YW under index selection varied with lamb pricing policy and feed costs. With low feed costs or no discounts for heavy lambs, YW increased at a modest rate in association with increasing WW, but with high feed costs or discounting of heavy lambs, genetic trends in WW were reduced by approximately 50% to constrain increases in YW. Changes in EPD for MM or fleece traits generally had smaller effects on profitability than changes in PLC, WW, and YW. Two indexes designed to address current rangeland production conditions (low forage costs and discounting of heavy feeder lambs) or more intensive and integrated production with retained ownership and value-based marketing of lambs (higher forage costs and no discounting of heavy lambs) were anticipated to meet the needs of most Targhee producers.

Correlation analysis of economic traits in Liaoning new breed of cashmere goats using microsatellite DNA markers.

The economic traits of Liaoning new breed of cashmere goats, a special Chinese genetic resource, were analyzed in 150 animals by typing 11 microsatellite loci. The association between three economic traits (body weight, cashmere yield and fineness) in this new breed of goats and the marker genotypes were analyzed. The results show that: AA and BC at LSCV13, DE at IDVGA64 and BB at BMS2782 were favorable genotypes for body weight. AB at LSCV13, AD and BE at CSSM11, BD and CC at IDVGA64, BC and DE at BMS2782 were favorable genotypes for cashmere yield. AA at CSSM11, BC and DE at IDVGA64, CD at BMS2782 were favorable genotypes for cashmere fineness.