Three-Dimensional Modeling and Quantitative Assessment of Mandibular Volume in Ectodermal Dysplasia: A Case Series.

Background and Objectives: Ectodermal dysplasia (ED)-a genetic disorder-is characterized by severe tooth deficiency. We compared the mandibular volume and the sagittal and horizontal mandibular widths between patients with ED (ED group) and individuals without tooth deficiency (control group) using three-dimensional modeling. We hypothesized that the mandibular volume differs in ED cases owing to congenital tooth deficiency. Materials and Methods: We used previously obtained cone-beam computed tomography (CBCT) images of 13 patients with ED. The control group data comprised retrospective CBCT images of patients of similar age and sex with a skeletal relationship of class 1. Further, using the three-dimensional image analysis software, the tooth crowns were separated from the mandible, the mandible was reconstructed and the gonion-to-gonion distance in the mandible was marked, the distance to the menton point was measured, and the distance between the two condyles was measured and compared with the control group. Results: Overall, 46.2% and 53.8% of the participants were men and women, respectively. In the ED group, the mean age of the participants was 15.46 (range, 6-24) years, and the mean number of mandibular teeth was 4.62. Notably, the edentulous mandible volume of the ED group (27.020 mm3) was statistically significantly smaller than that of the control group (49.213 mm3) (p < 0.001). There was no difference between the two groups in terms of the marked points. For data analysis, the Shapiro-Wilk test, independent samples t-test, and Mann-Whitney U test were used. Conclusions: It has been considered that mandible volume does not develop in ED cases because of missing teeth. Modern practices, such as the CBCT technique and three-dimensional software, may be effective in identifying the true morphologic features, especially in patients with genetic syndromes affecting the maxillofacial structure.

Double Chin Concerns after En Bloc Mandibular U-Shaped Osteotomy: Submental-Cervical Soft Tissue Changes and Anterior Belly of Digastric Muscle Assessment.

OBJECTIVE: To assess submental-cervical soft tissue changes after en bloc mandibular U-shaped osteotomy and examine alterations in the anterior belly of digastric muscle (ABDM). METHODS: A retrospective study analyzed 20 patients who underwent en bloc mandibular U-shaped osteotomy from 2018 to 2023. Preoperative (Tp) and long-term follow-up (Tf) CT data were collected for analysis, measuring mandibular volume, soft tissue thickness at menton (Mes) and cervicale (C), and ABDM parameters (length, cross-sectional area (CSA), volume, distance from centroid point to the mandibular margin). Correlation analyses were performed to investigate the connection between soft tissue thickness changes, ABDM changes, and mandibular osteotomy volume. RESULTS: Long-term follow-up revealed a significant increase in soft tissue thickness at the Mes and C points after U-shaped mandibular osteotomy, especially at the C point. The adaptive length of ABDM decreased, CSA increased, and volume decreased, but the ABDM centroid point shifted downward relative to the mandibular margin, indicating drooping protrusion. The increment of soft tissue thickness was moderately positively correlated with the amount of osteotomy, and the decrement of ABDM length and volume were slightly positively correlated with the amount of osteotomy. CONCLUSION: The degree of soft tissue relaxation after U-shaped osteotomy is related to the extent of osteotomy. Notably, the protrusion of ABDM relative to the mandibular margin affects submental-cervical contour aesthetics. Prior to U-shaped osteotomy, it is crucial to assess the soft tissue condition of the patient's lower face, and the individualized design of the osteotomy volume should be carried out cautiously and safely. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Is the assessment of the mandibular molar danger zone affected by field of view and voxel size in cone beam computed tomography examinations?

OBJECTIVE: To verify if assessment of the danger zone (DZ) in the mesial root of mandibular molars is affected by field of view (FOV) and voxel sizes in cone beam computed tomography (CBCT) scans. STUDY DESIGN: Forty mandibular molars were scanned by micro-computed tomography, creating the reference standard. The teeth were then submitted for CBCT scans with FOVs of 10 × 5.5 cm and 5 × 5.5 cm and voxel sizes of 0.4, 0.2, 0.15, and 0.075 mm3. The smallest dentin thickness in the DZ from the mesiobuccal and mesiolingual canals was measured at 2, 4, and 6 mm apical to the root furcation. Descriptive statistics, paired t-tests, and intraclass correlation coefficients were used for statistical analysis with significance established at P < .05. RESULTS: All CBCT measurements overestimated the DZ dentin thickness (P < .001) compared to the reference standard. The greatest overestimation occurred in the 5 × 5.5 cm FOV with 0.4 mm3 voxels (P = .007). Dentin thickness measured with the 5 × 5.5 cm FOV and 0.075 mm3 voxels was significantly smaller and produced the best ICC value with the reference standard (0.936). CONCLUSIONS: CBCT overestimates the dentin thickness of the DZ regardless of FOV and voxel sizes. The 5 × 5.5 cm FOV showed the best performance with the 0.075 mm3 voxel size, but it performed poorly with 0.4 mm3 voxels.

Effect of metal artefact reduction level on the assessment of dental implant positioning by cone-beam computed tomography.

OBJECTIVES: This study evaluated the effect of metal artefact reduction (MAR) level and tube current on the assessment of dental implant positioning relative to the mandibular canal (MC) through cone-beam computed tomography (CBCT). METHODS: Titanium dental implants were placed in dried mandibles at 0.5-mm superior to the MC (group 1/n = 8) and 0.5-mm inside the MC with perforation of the cortex (group 2/n = 10). CBCT scans were obtained with different levels of MAR (off, medium, and high) and 2 tube currents (4 and 8 mA). Four examiners analysed the images and scored the contact between the implant and the MC using a 5-point scale. Sensitivity, specificity, area under receiver operating characteristic curve (ROC), and frequency of scores were calculated. Data were compared with analysis of variance 2-way and Tukey's test and scores with Chi-square test. RESULTS: Specificity and area under ROC curve decreased significantly when MAR level was high compared with MAR-medium and MAR-off. The frequency of score 3 (inconclusive) was the highest, and scores 1 and 5 (definitely no contact and definitely contact, respectively) were the lowest with MAR-high, regardless of the tube current. When MAR was off, there were higher frequencies of scores 1 and 5. CONCLUSIONS: The level of MAR influences the assessment of the relationship between the dental implant and the MC. MAR-high led to lower diagnostic accuracy compared with MAR-medium and off. ADVANCES IN KNOWLEDGE: This article shows that high level of MAR can interfere in the diagnostic of dental implant positioning relative to the MC, decreasing its accuracy.

Diagnostic value of cone beam computed tomography for root canal morphology assessment - a micro-CT based comparison.

OBJECTIVES: The aim of this study was to assess cone beam computed tomography (CBCT) as a root canal anatomy diagnostic tool by comparison with micro-CT gold-standard. MATERIALS AND METHODS: 216 two-rooted mandibular molars were first scanned in a CBCT device (200 µm voxel size) and posteriorly in a micro-CT scanner (19.61 µm). The volumes were sequentially screened to classify main root canal anatomy according to Vertucci classification, and for the presence of lateral canals and apical deltas, in both mesial and distal roots. RESULTS: Both methods revealed a higher prevalence of Vertucci Type II and IV in the mesial root, and Vertucci Type I in the distal root. The percentage of agreement for main root canal anatomy classification between CBCT and micro-CT scores was high (85.2%). CONCLUSION: Sensibility to detect both lateral canals and apical deltas with CBCT was low. These results attest to the fact that minor anatomical changes might be difficult to identify with CBCT imaging, hampering its diagnostic value.

Radiological assessment of periodontal ligament space visibility on third molars for forensic age assessment - a comparison study of three different staging scales.

Various staging scales have been proposed for the assessment of the visibility of the periodontal ligament space of mandibular third molars on dental panoramic radiographs (PANs) for forensic age assessment in living individuals. However, up to now, there has been no systematic comparison between these staging scales available. We directly compared the 2010 staging scale proposed by Olze et al. with the 2017 staging by Lucas et al. and the 2020 staging by Guo et al. in a German study population. We evaluated 233 PANs from 115 females and 118 males aged 20.0 to 40.9 years using three independent examiners, with one examiner conducting two assessments. We examined the correlation between age and stage, as well as the inter- and intra-rater reliabilities. While the point estimates for the correlation coefficient and the reliability measures were lowest for the Guo scale and highest for the Olze scale, confidence intervals showed a large overlap, particularly for the scales of Olze et al. and Lucas et al. The correlation coefficients between stage and age were consistently lower in females than in males across all methods. In summary, we showed that the staging scales of Olze et al. and Lucas et al. were very similar. The Olze method showed higher point estimates across all analyses, and because there are more reference data available for this method, we argue that it should be preferred as the method of choice for further studies in the field. However, Guo method could be considered for instances, in which the inter-radicular periodontal ligament is not evaluable.

Computed tomography/magnetic resonance imaging for mandibular boundary invasion of oral squamous cell carcinoma assessment.

BACKGROUND: The range of mandibular invasion by a tumour needs to be determined accurately to minimize unnecessary damage to the mandible. This study aimed to compare tumour boundary lines on computed tomography/magnetic resonance (CT/MR) images with those from pathological findings during the preoperative assessment of mandibular invasion by oral squamous cell carcinoma (OSCC). By comparing the methods, the potential of CT/MR for this application could be further elucidated. METHODS: Eight patients with OSCC were imaged with CT/MR, mandibular specimens were collected, and the material site was measured. Haematoxylin-eosin staining was used for histopathological assessment. The presence and boundaries of bone invasion were evaluated. The CT/MR and histopathological boundaries of bone invasion were delineated and merged to compare and calculate the deviation of CT/MR and histopathological boundaries using the Fréchet distance. RESULTS: The mean Fréchet distance between the CT and pathological tumour boundaries was 2.69 mm (standard error 0.46 mm), with a minimum of 1.18 mm, maximum of 3.64 mm, median of 3.10 mm, and 95% confidence interval of 1.40-3.97 mm. The mean Fréchet distance between the tumour boundaries on the MR and pathological images was 3.07 mm (standard error 0.56 mm), with a minimum of 1.53 mm, maximum of 4.74 mm, median of 2.90 mm, and 95% confidence interval of 1.53-4.61 mm. CONCLUSIONS: CT/MR imaging can provide an effective preoperative assessment of mandibular invasion of OSCC. Pathology images can be positioned on CT/MR scans with the help of computer software to improve the accuracy of the findings. The introduction of the Fréchet distance to compare tumour boundary lines is conducive to computer image diagnosis of tumour invasion of jaw boundaries.

In-house virtual surgical planning and guided mandibular reconstruction is less precise, but more economical and time-efficient than commercial procedures.

BACKGROUND: To compare an in-house and a commercially available surgical planning solution for mandibular reconstruction in terms of postoperative reconstruction accuracy and economic benefit. METHODS: Twenty-nine consecutive patients with advanced oral squamous cell carcinoma (OSCC) requiring segmental mandibular reconstruction were enrolled. Fifteen patients underwent in-house surgical planning and 14 patients underwent a commercially available planning solution. A morphometric comparison of preoperative and postoperative computed tomography (CT) data sets and a cost-benefit comparison were performed. RESULTS: Volumes of planned and reconstructed bone segments differed significantly for both in-house planning (p = 0.0431) and commercial planning (p < 0.0001). Significant differences in osteotomy angles were demonstrated for in-house planning (p = 0.0391). Commercial planning was superior to in-house planning for total mandibular deviation (p = 0.0217), intersegmental space volumes (p = 0.0035), and lengths (p = 0.0007). No significant difference was found between the two planning solutions in terms of intersegmental ossification and the incidence of wound healing disorders. In-house planning took less time than commercial planning (p < 0.0001). Component manufacturing costs (p < 0.0001) and total cumulative costs (p < 0.0001) were significantly lower for in-house planning. CONCLUSIONS: In-house surgical planning is less accurate but has a cost advantage and could be performed in less time.

Assessment of mandibular trabecular structure and cervical vertebral maturation using fractal analysis.

BACKGROUND: Changes in bone trabeculae occur during skeletal maturation. Fractal analysis is a technique for assessing changes in the internal structure of the bone. OBJECTIVE: The aim of this study was to investigate correlation of bone trabeculation measured on panoramic and lateral cephalometric radiographs with cervical vertebral maturation stages (CVMS). METHODS: CVMS was evaluated on lateral cephalometric radiographs of 120 individuals aged 6 to 18 years. The subjects were divided into 6 groups (n= 20 each) according to CVMS. On panoramic and lateral cephalometric radiographs, fractal dimension (FD) analyses were performed in mandibular corpus, gonial and condylar regions and cervical vertebral bodies (C2, C3, C4). RESULTS: FD measurements from the mandibular corpus region bilaterally and C2-C4 vertebral bodies showed significant positive correlations with CVMS (r= 0.418, r= 0.412, r= 0.324, r= 0.304, r= 0.263, respectively). Significant differences were found in the FD values of the right/left mandibular corpus and C2 and C3 vertebrae compared to CVMS (P< 0.001, P< 0.001, P= 0.005, P= 0.019, respectively). CONCLUSION: Significant positive moderate correlations between the FD values of the right and left mandibular corpus and CVMS suggest that fractal analysis may be useful in determining skeletal maturity stage. The significant FD values obtained from the right/left mandibular corpus, and C2 and C3 vertebra indicate that the complexity of the internal trabecular structure increases with maturation.

Dental age assessment in the living: a comparison of two common stage classifications for assessing radiographic visibility of the root canals in mandibular third molars.

After dentition is complete, degenerative tooth characteristics can be used for dental age assessment. Radiological assessment of the visibility of the root canals of the mandibular third molars in dental panoramic radiographs (DPRs) is known to be one such suitable feature. Essentially, two different stage classifications are available for evaluating the visibility of the root canals of mandibular third molars in the DPR. The aim of this study was to determine if one method outperforms the other. Therefore, the 2010 method of Olze et al. was directly compared to the 2017 method of Lucas et al. in the 2020 modification of Al Qattan et al. To this end, 233 DPRs from 116 females and 117 males aged 20.0 to 40.9 years were evaluated by three independent experienced examiners. In addition, one examiner ran two independent evaluations. Correlation between age and stage was investigated, and the inter- and intra-rater reliability was estimated for both methods. Correlation between age and stage was higher with the Olze method (Spearman rho 0.388 [95% CI 0.309, 0.462], males and 0.283 [95% CI 0.216, 0.357], females) than the Lucas method (0.212 [95% CI 0.141, 0.284], males and 0.265 [95% CI 0.193, 0.340], females). The intra-rater repeatability of the Olze method (Krippendorff's α = 0.576 [95% CI 0.508, 0.644], males and α = 0.592 [95% CI 0.523, 0.661], females) was greater than that for the Lucas method (intra-rater α = 0.422 [95% CI 0.382, 0.502], males and α = 0.516 [95% CI 0.523, 0.661], females). Inter-rater reproducibility was also greater for the Olze method (α = 0.542 [95% CI 0.463, 0.620], males and α = 0.533 [95% CI 0.451, 0.615], females) compared to the Lucas method (α = 0.374 [95% CI 0.304, 0.443], males and α = 0.432 [95% CI 0.359, 0.505], females). The method of Olze et al. was found to present marginal advantages to the Lucas et al. method across all examinations and may be a more appropriate method for application in future studies.

Preinterventional Third-Molar Assessment Using Robust Machine Learning.

Machine learning (ML) models, especially deep neural networks, are increasingly being used for the analysis of medical images and as a supporting tool for clinical decision-making. In this study, we propose an artificial intelligence system to facilitate dental decision-making for the removal of mandibular third molars (M3M) based on 2-dimensional orthopantograms and the risk assessment of such a procedure. A total of 4,516 panoramic radiographic images collected at the Center of Dental Medicine at the University of Zurich, Switzerland, were used for training the ML model. After image preparation and preprocessing, a spatially dependent U-Net was employed to detect and retrieve the region of the M3M and inferior alveolar nerve (IAN). Image patches identified to contain a M3M were automatically processed by a deep neural network for the classification of M3M superimposition over the IAN (task 1) and M3M root development (task 2). A control evaluation set of 120 images, collected from a different data source than the training data and labeled by 5 dental practitioners, was leveraged to reliably evaluate model performance. By 10-fold cross-validation, we achieved accuracy values of 0.94 and 0.93 for the M3M-IAN superimposition task and the M3M root development task, respectively, and accuracies of 0.9 and 0.87 when evaluated on the control data set, using a ResNet-101 trained in a semisupervised fashion. Matthew's correlation coefficient values of 0.82 and 0.75 for task 1 and task 2, evaluated on the control data set, indicate robust generalization of our model. Depending on the different label combinations of task 1 and task 2, we propose a diagnostic table that suggests whether additional imaging via 3-dimensional cone beam tomography is advisable. Ultimately, computer-aided decision-making tools benefit clinical practice by enabling efficient and risk-reduced decision-making and by supporting less experienced practitioners before the surgical removal of the M3M.

Reliability and reproducibility of CBCT assessment of mandibular changes before and after treatment for Class III growing patients - an easy and quick way for evaluation.

The objective of this study was to evaluate intraobserver reliability and inter-observer reproducibility of a 3-dimensional (3D) assessment method for mandibular changes of growing patients after orthodontic treatment for Class III malocclusion.Methods Cone-beam computed tomography (CBCT) scans were performed before and after orthodontic treatment for 27 patients. During the scan, the patient was positioned such that his/her mandibular plane was parallel to floor. Three observers independently worked on the DICOM data, reconstructed the pre- and post-treatment 3D models in software, selected the stable anatomical structures (basal bone area from the lingual surface of the symphysis to the distal aspect of the first molars) to guide the automated superimposition process. Then, each observer registered 14 anatomical landmarks on the virtual models, for three times after suitable interval, to generate 3 sets of coordinates; the mean was taken as the coordinates for that particular landmark. The intraobserver reliability and inter-observer reproducibility of the method were analyzed.Results The ICCs was > 0.90 for 25 (92.6%) of the intraobserver assessments. The precision of the measurement method was < 0.3 mm in 24 (88.9%) cases. The interobserver reproducibility errors were < 0.3 mm in 21 of the 27 cases.Conclusions The intraobserver reliability and inter-observer reproducibility of 3D assessment of mandibular changes using the virtual models were excellent.

Assessment of CBCT gray value in different regions-of-interest and fields-of-view compared to Hounsfield unit.

OBJECTIVES: Different factors can affect the discrepancy between the gray value (GV) measurements obtained from CBCT and the Hounsfield unit (HU) derived from multidetector CT (MDCT), which is considered the gold-standard density scale. This study aimed to explore the impact of region of interest (ROI) location and field of view (FOV) size on the difference between these two scales as a potential source of error. METHODS: Three phantoms, each consisting of a water-filled plastic bin containing a dry dentate human skull, were prepared. CBCT scans were conducted using the NewTom VGi evo system, while MDCT scans were performed using Philips system. Three different FOV sizes (8 × 8 cm, 8 × 12 cm, and 12 × 15 cm) were used, and the GVs obtained from eight distinct ROIs were compared with the HUs from the MDCT scans. The ROIs included dental and bony regions within the anterior and posterior areas of both jaws. Statistical analyses were performed using SPSS v. 26. RESULTS: The GVs derived from CBCT images were significantly influenced by both ROI location and FOV size (p < 0.05 for both factors). Following the comparison between GVs and HUs, the anterior mandibular bone ROI represented the minimum error, while the posterior mandibular teeth exhibited the maximum error. Moreover, the 8 × 8 cm and 12 × 15 cm FOVs resulted in the lowest and highest degrees of GV error, respectively. CONCLUSIONS: The ROI location and the FOV size can significantly affect the GVs obtained from CBCT images. It is not recommended to use the GV scale within the posterior mandibular teeth region due to the potential for error. Additionally, selecting smaller FOV sizes, such as 8 × 8 cm, can provide GVs closer to the gold-standard numbers.

Applicative Assessment of a Selective Laser Melting 3D-Printed Ti-6Al-4 V Plate with a Honeycomb Structure in the Reconstruction of a Mandibular Defect of a Beagle Dog.

The most challenging problem in oral and maxillofacial surgery is the reconstruction of defects for the oral and maxillofacial complex. Transfer of different autografts is known as the "gold standard" for the reconstruction of bone defects in the oral and maxillofacial region. Graft harvesting, however, can lead to many complications, such as donor-site morbidity, surgical time-consuming, etc. Three-dimensional (3D) printing technology is an innovative technique that allows the fabrication of personalized plates and scaffolds to fit the precise anatomy of an individual's defect. In this study, a selective laser melting 3D-printed Ti-6Al-4 V plate with a honeycomb was designed, and its physical and biological features were characterized. The personalized 3D-printed scaffold and commercialized titanium reconstruction plate were applied to reconstruct a 4 cm mandibular defect in a beagle dog. Effects of the treatment were analyzed radiologically and histologically. Our results showed that the application of a 3D-printed plate with a honeycomb achieved good biocompatibility and osseointegration and has potential clinical application.

Risk assessment of mandibular incisive canal perforation during dental implant surgery in the anterior edentulous mandible: a virtual implant placement study using cone beam computed tomography.

OBJECTIVE: The aim of this study was to evaluate the risk of mandibular incisive canal (MIC) perforation caused by implants placed on cone beam computed tomography (CBCT) images in the edentulous mandibular anterior region. STUDY DESIGN: A total of 1200 dental implants were virtually inserted on 150 eligible CBCT scans. The relationship of different implant sizes with the incidence of MIC perforation and the relationship between crest height and perforation were evaluated. RESULTS: A total of 1200 virtual implant applications were performed on 150 patients. In 87% of cases, MIC was identified. Perforation in 12 and 14 mm implants was significantly higher than in 8- and 10-mm implants (P < .05). Perforation was found to be statistically significantly higher in crest heights that were ≤20 mm than in crest heights >20 mm (P < .05). CONCLUSIONS: Our results showed high perforation rates in the 12- and 14-mm implants and crests heights that were ≤20 mm during implant surgery in the mandibular anterior edentulous region. Perforation of the MIC should be considered a complication of implant surgery in the mandibular anterior region; therefore, CBCT images should be evaluated before implant placement.

Assessment of the correlation between mandibular radiomorphometric patterns and dual-energy X-ray absorptiometry measurements for screening bone mineral density.

The objective of this study was to investigate the correlation between scores for femoral and lumbar spine bone mineral density (dual-energy X-ray absorptiometry [DXA]) and visual, qualitative mandibular bone pattern assess¬ments (mandibular cortical index, trabecular bone pattern, and visual mandibular cortical width) as well as age and body mass index. Three trained observers evaluated 200 panoramic radiographs and 200 femoral and lumbar spine DXA measurements from 100 male and 100 female participants. The κ test showed an acceptable agreement among observers (0.73; P = 0.003). The Shapiro-Wilk test revealed that the variables were not normally distributed, so the Spearman correlation test was used. The mean age of the sample was 60.7 (13.9) years, and 86.0% of the patients were White. There were inverse correlations between the mandibular cortical index and the spine T-score in men, women, and the total sample as well as between the spine Z-score in the total sample. An inverse correlation was observed between the trabecular bone pattern and the spine T- and Z-scores in women and the total sample. The results also showed inverse correlations between the visual mandibular cortical width and all parameters analyzed in men, women, and the total sample except for the femur T-score and spine T- and Z-scores in men. Body mass index was correlated with all DXA parameters. Age was inversely correlated with femur T-scores in men and women but not with spine DXA values in men. The results suggest that qualitative assessments of radiomorphometric patterns on panoramic radiographs correlate with DXA values and therefore are suitable for screening patients at risk of developing low bone mineral density.

Three-dimensional radiographic assessment of immediate implant placement in the posterior mandible: A novel parameter-based classification.

OBJECTIVES: To assess the implant position (IP), the interradicular septum width (ISW) and radiographic bone to implant contact (BIC), when simulating an immediate implant placement in first and second mandibular molars. STUDY DESIGN: 75 patients (150 sites) were studied using cone beam computed tomography scans (CBCT) and computer aided design software. Implants were placed in a prosthetically driven position; subsequently, IP and BIC were digitally calculated. Linear ISW was also analyzed at 2, 4 and 6mm apically to the highest septal bony peak. Multiple linear regressions were performed to assess relationships between BIC and the different predictive variables. Additionally, the receiver operating characteristics (ROC) curve was used to create a model for BIC based on the ISW at 2mm. RESULTS: BIC in implants replacing first molars was the highest at the septal (S) position when compared to those in septal-mesial (S-M) position (p-value 0.001). As for the second molar, the highest percentage of BIC was recorded at the septal (S) position, followed by those in S-M and mesial (M) positions (p<0.001). CONCLUSION: According to the proposed classification, clinician must consider the ISW and IP when placing immediate implant in the first and second mandibular molar sites. When tackling first molars, S position is predominant, while S-M position is the most common in the second molars. ISW at 2mm should be at least respectively 2mm and 2.5mm at the first and second molar sites to achieve 50% of BIC.

Virtual Three-Dimensional Model Analysis in the Assessment of the Maxillary and Mandibular Donor Sites on Cone-Beam Computed Tomography Images.

Using the Mimics software to assess the maxillary and mandibular donor sites on cone-beam computed tomography (CBCT) images. This cross-sectional study was conducted on 80 CBCT scans. Data in DICOM format were transferred to the Mimics software version 21, and a maxillary and a mandibular mask according to cortical and cancellous bones were virtually created for each patient based on Hounsfield units (HUs). Three-dimensional models were reconstructed, and boundaries of donor sites, including mandibular symphysis, ramus, coronoid process, zygomatic buttress, and maxillary tuberosity, were defined. Virtual osteotomy was conducted on the 3D models to harvest bone. The volume, thickness, width, and length of harvestable bone from each site were quantified by the software. Data were analyzed by independent t-test, one-way ANOVA, and Tukey's test (alpha = 0.05). The greatest harvestable bone volume and length differences were observed between ramus and tuberosity (P < 0.001). The maximum and minimum harvestable bone volumes were found in symphysis (1753.54 mm3) and tuberosity (84.99 mm3). The greatest difference in width and thickness was noted between the coronoid process and tuberosity (P < 0.001) and symphysis and buttress (P < 0.001), respectively. Harvestable bone volume from tuberosity, length, width, volume from symphysis, and volume and thickness from the coronoid process was significantly greater in males (P < 0.05). The harvestable bone volume was the highest in symphysis, followed by ramus, coronoid, buttress, and tuberosity. The harvestable bone length and width were the highest in the symphysis and coronoid process, respectively. Maximum harvestable bone thickness was found in symphysis.

Assessment of the Prevalence of Radix Entomolaris and Distolingual Canal in Mandibular First Molars in 15 Countries: A Multinational Cross-sectional Study with Meta-analysis.

AIM: The aim of this study was two-folded: i) to assess the prevalence of Distolingual Canal (DLC) and Radix Entomolaris (RE) in Mandibular First Molars (M1Ms), using Cone Beam Computed Tomography (CBCT) images and ii) to assess the impact of sociodemographic factors on the prevalence of these conditions worldwide. METHODS: CBCT images were scanned retrospectively and the ones including bilateral M1Ms were included in the study. The evaluation was performed by 1 researcher in each country, trained with CBCT technology. A written and video instruction program explaining the protocol to be followed step-by-step was provided to all observers to calibrate them. The CBCT imaging screening procedure consisted of evaluating axial sections from coronal to apical. The presence of DLC and RE in M1Ms (yes/no) was identified and recorded. RESULTS: Six thousand three hundred four CBCTs, representing 12,608 M1Ms, were evaluated. A significant difference was found between countries regarding the prevalence of both RE and DLC (P < .05). The prevalence of DLC ranged from 3% to 50%, and the overall prevalence was 22% (95% CI: 15%-29%). RE prevalence ranged from 0% to 12%, and the overall prevalence was 3% (95% CI: 2%-5%). There were no significant differences between left and right M1Ms or between genders for either DLC or RE (P > .05). CONCLUSION: The overall prevalence of RE and DLC in M1Ms was 3% and 22%. Additionally, both RE and DLC showed substantial bilaterally. These variations should be considered by endodontic clinicians during endodontic procedures in order to avoid potential complications.

Tridimensional assessment of the mandibular angle in patients with different skeletal patterns by cone-beam computed tomography scans: a retrospective study.

BACKGROUND: Since the muscles of chewing are involved in the region of the mandibular angle, important structures in surgical and orthodontic procedures, to study its morphological aspects and the possible influence of different patterns of skeletal development would be of interest. Thus, this study aimed to assess the influence of patient characteristics - such as sex, skeletal malocclusion (Class I, Class II, and Class III) and facial type (brachycephalic, mesocephalic, and dolichocephalic) - on the width, height, thickness, and volume of the mandibular angle, using cone-beam computed tomography (CBCT) scans. METHODS: CBCT scans were assessed - 144 men and 154 women, total of 298 - and classified according to skeletal patterns (skeletal malocclusions and facial types). Width, height, and thickness of the mandibular angle were measured using OnDemand 3D software. The volumetric measures of the mandibular angle were obtained using the ITK-SNAP software. Analysis of Variance (multiway ANOVA) with Tukey's post-hoc test compared the data, with a 5% significance level. RESULTS: Among the factors studied, sex significantly influenced all the analyzed variables (height, width, thickness, and volume of the mandibular angle) (p < 0.05); in general, male individuals presented higher values than females. In some cases, the skeletal malocclusion and facial type factors influenced only the width and height variables (p < 0.05); in general, the Class III and dolichocephalic individuals presented higher values in relation to the other types of skeletal malocclusions and facial types. CONCLUSIONS: Variations in the craniofacial growth pattern, considering the different skeletal malocclusions and facial types, had some influence in the width and height dimensions of the mandibular angle. Furthermore, sex influenced all the studied variables.