Assessment of protein and phospholipid bioaccessibility in ultrafiltered buttermilk cheese using TIM-1 in vitro gastrointestinal methods.

To meet the high consumer demand, butter production has increased over the last few years. As a result, the buttermilk (BM) co-produced volumes require new ways of adding value, such as in cheese manufacturing. However, BM use in cheese milk negatively influences the cheesemaking process (e.g., altered coagulation properties) and the product's final quality (e.g., high moisture content). The concentration of BM by ultrafiltration (UF) could potentially facilitate its use in cheese manufacturing through an increased protein content while maintaining the milk salt balance. Simultaneously, little is known about the digestion of UF BM cheese. Therefore, this study aimed to characterize the impact of UF BM on cheese manufacture, its structure, and its behavior during in vitro digestion. A 2-fold UF concentrated BM was used for cheese manufacture (skim milk [SM] - control). Compositional, textural, and microstructural analyses of cheeses were first conducted. In a second step, the cheeses were fed into an in vitro TNO gastrointestinal digestion model (TIM-1) of the stomach and small intestine and protein and phospholipid (PL) bioaccessibility was studied. The results showed that UF BM cheese significantly differed from SM cheese regarding its composition, hardness (p < 0.05) and microstructure. However, in TIM-1, UF BM and SM cheeses showed similar digestion behavior as a percentage of protein and PL intake. Despite relatively more non-digested and non-absorbed PL in the ileum efflux of UF BM cheese, the initially higher PL concentration contributes to an enhanced nutritional value compared to SM cheese. To our knowledge, this study is the first to compare the bioaccessibility of proteins and PL from UF BM and SM cheeses.

Assessment of water relaxometry of meat under different ageing processes using time domain nuclear magnetic resonance relaxometry.

This study assessed water relaxometry of beef exposed to different ageing techniques by examining the inner and surface regions using time-domain nuclear magnetic resonance (TD-NMR) relaxometry. Beef strip loins were aged under vacuum (Wet), under vacuum using moisture absorbers (Abs), under vacuum using moisture absorbers and with mechanical tenderisation (AbsTend), or without any packaging (Dry). The ageing technique significantly influenced various meat parameters, including dehydration, total loss, and the moisture content of the meat surface. The transverse (T2) relaxation times provided a more sensitive indicator of the changes in meat water relaxometry than the longitudinal (T1) relaxation times. The Dry samples exhibited distinct differences in the T2 signals between the surface and inner regions of the meat. In particular, for the inner region, there were significant differences in signal areas between the Wet and Dry samples, and the Abs and AbsTend samples were positioned closely together between the Dry and Wet samples. The principal component analysis supported these findings: it indicated some differentiation among the ageing techniques in the score plot, but the differentiation was more pronounced when analysing the surface region. Additionally, there was a strong correlation between dehydration and the T2 values, leading to a clustering of the samples based on the ageing technique. The overlap between the Abs and AbsTend samples, situated between the Dry and Wet samples, suggests the potential of these treatments to produce meat with properties that are intermediate to Wet and Dry meat. Furthermore, tenderisation did not lead to greater dehydration.

Assessment tools in food safety and adherence to the sanitary protocol for coping with COVID-19 in food services.

Food services, which must meet the sanitary standards for food production, needed to adapt to COVID-19 protocols in times of pandemic. In this context, the study of food safety assessment tools and sanitary protocols can contribute to the systematization of sanitary control actions and to the understanding how services have adapted to the new requirements. Thus, the present study aims to evaluate the relationships among the results of the assessment tools for food safety and adherence to the sanitary protocol for coping with COVID-19 in food services. Sanitary inspections were performed in 40 food services located in the center of the city of São Paulo - Brazil. Data were collected through the application of four checklists to evaluate the following: i. risk for FBD; ii. Good Handling Practices; iii. the structural requirements; and iv. The implementation of the COVID-19 sanitary protocol. The risk assessment tool was interpreted using a risk score, with each item weighted according to the risk for FBD. The results of the other tools were evaluated using the overall percentage of violated items. The results showed the predominance of high risk of GHP in the food services evaluated and a high percentage of violation of Good Handling Practices and structural requirements. The percentage of violation of the COVID-19 health protocol was moderate in most establishments. The degree of risk showed a high positive correlation with Good Handling Practices violations (Spearman ρ = 0.73; p < 0.001) and structural requirements (Spearman ρ = 0.63; p < 0.001). Regarding the tool for assessing adherence to the COVID-19 sanitary protocol, a moderate correlation was found with the violations of Good Handling Practices (Spearman ρ = 0.65; p < 0.001), with an emphasis on the thematic block relevant to food handlers. This discussion of the relationships among the results of the evaluation tools and their measurements may therefore be useful for improving the application of these tools by professionals involved in inspection activities, allowing the greater systematization of sanitary control actions and contributing to reduced risk of FBD.

Development and application of the Meal and Snack Assessment (MESA) quality scale for children and adolescents using item response theory.

BACKGROUND: Meals differ in terms of food items and nutritional quality. The aim of the present study was to propose a scale to measure the meals quality of schoolchildren according to food processing degree, perform a preliminary evaluation of the scale's validity and reliability and apply the scale to a representative sample of schoolchildren in a city in southern Brazil. METHODS: A methodological study based on the generalized graded unfolding model (GGUM) of item response theory (IRT) with analysis of secondary data was carried out in 6,399 schoolchildren of 6-15y-old attending 2nd to 5th grades of public elementary schools in Florianópolis, Brazil, in 2013-2015 who answered the validated Food Intake and Physical Activities of Schoolchildren (WebCAAFE) questionnaire. Meal quality was the latent trait. The steps for the development of the scale included: latent trait definition; item generation; dimensionality analysis; estimation of item parameters; scale levels definition; assessment of validity and reliability; and assessment of the meal quality of a subsample of schoolchildren aged 7 to 12 years (n = 6,372). RESULTS: Eleven out of eighteen items had adequate parameters, without differential item functioning for sex or age. Meal quality was categorized into three levels: healthy, mixed, and unhealthy. Higher scores indicate a greater prevalence of ultra-processed foods in daily meals. Most schoolchildren had mixed (40.6%) and unhealthy (41%) meal patterns. CONCLUSIONS: IRT analysis allowed the development of the scale, which measures the quality of meals and snacks based on the degree of food processing. At all snack times, there was a higher frequency of ultra-processed foods consumption, therefore foods consumed as snacks are a potential focus for nutritional interventions.

Predictive modeling of Salmonella spp. growth behavior in cooked and raw chicken samples: Real-time PCR quantification approach and model assessment in different handling scenarios.

The increasing prevalence of Salmonella contamination in poultry meat emphasizes the importance of suitable predictive microbiological models for estimating Salmonella growth behavior. This study was conducted to evaluate the potential of chicken juice as a model system to predict the behavior of Salmonella spp. in cooked and raw chicken products and to assess its ability to predict cross-contamination scenarios. A cocktail of four Salmonella serovars was inoculated into chicken juice, sliced chicken, ground chicken, and chicken patties, with subsequent incubation at 10, 15, 20, and 25°C for 39 h. The number of Salmonella spp. in each sample was determined using real-time polymerase chain reaction. Growth curves were fitted into the primary Baranyi and Roberts model to obtain growth parameters. Interactions between temperature and growth parameters were described using the secondary Ratkowsky's square root model. The predictive results generated by the chicken juice model were compared with those obtained from other chicken meat models. Furthermore, the parameters of the chicken juice model were used to predict Salmonella spp. numbers in six worst-case cross-contamination scenarios. Performance of the chicken juice model was evaluated using the acceptable prediction zone from -1.0 (fail-safe) to 0.5 (fail-dangerous) log. Chicken juice model accurately predicted all observed data points within the acceptable range, with the distribution of residuals being wider near the fail-safe zone (75%) than near the fail-dangerous zone (25%). This study offers valuable insights into a novel approach for modeling Salmonella growth in chicken meat products, with implications for food safety through the development of strategic interventions. PRACTICAL APPLICATION: The findings of this study have important implications in the food industry, as chicken juice could be a useful tool for predicting Salmonella behavior in different chicken products and thus reducing the risk of foodborne illnesses through the development of strategic interventions. However, it is important to recognize that some modifications to the chicken juice model will be necessary to accurately mimic all real-life conditions, as multiple factors particularly those related to food processing can vary between different products.

Quantitative microbial risk assessment of Salmonella in fresh chicken patties.

Quantitative microbial risk assessment (QMRA) has witnessed rapid development within the context of food safety in recent years. As a means of contributing to these advancements, a QMRA for Salmonella spp. in fresh chicken patties for the general European Union (EU) population was developed. A two-dimensional (Second Order) Monte-Carlo simulation method was used for separating variability and uncertainty of model's parameters. The stages of industrial processing, retail storage, domestic storage, and cooking in the domestic environment were considered in the exposure assessment. For hazard characterization, a dose-response model was developed by combining 8 published dose-response models using a Pert distribution for describing uncertainty. The QMRA model predicted a mean probability of illness of 1.19*10-4 (5.28*10-5 - 3.57*10-4 95 % C.I.), and a mean annual number of illnesses per 100,000 people of 2.13 (0.96 - 6.59 95 % C.I.). Moreover, sensitivity analysis was performed, and variability in cooking preferences was found to be the most influential model parameter (r = -0.39), followed by dose-response related variability (r = 0.22), and variability in the concentration of Salmonella spp. at the time of introduction at the processing facility (r = 0.11). Various mitigation strategy scenarios were tested, from which, "increasing the internal temperature of cooking" and "decreasing shelf life" were estimated to be the most effective in reducing the predicted risk of illness. Salmonella-related illnesses exhibit particularly high severity, making them some of the most prominent zoonotic diseases in the EU. Regular monitoring of this hazard in order to further highlight its related parameters and causes is a necessary procedure. This study not only provides an updated assessment of Salmonella spp. risk associated with chicken patties, but also facilitates the identification of crucial targets for scientific investigation and implementation of real-world intervention strategies.

Semi-industrial ultrasound-assisted extraction of grape-seed proteins.

BACKGROUND: To manage industrial waste in accordance with the circular bioeconomy concept it is sometimes necessary to handle grape seeds, an abundant by-product of the wine-making process. This study presents a process based on ultrasound technology for the extraction of grape-seed proteins, due to their nutritional and techno-functional properties. The protein content of extracts obtained under silent and lab-scale conditions was compared with that obtained under semi-industrial ultrasound conditions, and the chemical composition (carbohydrates, total phenols, and lipids) and the elemental profiles of the final, up-scaled downstream extracts were characterized. RESULTS: This work found that the maximum amount of protein in the final product was 378.31 g.kg-1 of the extract. Chemical characterization revealed that each 1 kg of extract had an average content of 326.19 g gallic acid equivalent as total phenols, 162.57 g glucose equivalent as carbohydrates, and 382.76 g of lipophilic compounds. Furthermore, when the extract was checked for hazardous elements, none were found in levels that could be considered a risk for human health. CONCLUSION: The proposed semi-industrial strategy has the potential to contribute greatly to the valorization of grape seeds through the preparation of a protein-rich extract that can be used as an alternative to synthetic wine stabilizers and for the development of novel food and nutraceutical products. © 2024 Society of Chemical Industry.

"Food faddists and pseudoscientists!": Reflections on the history of resistance to ultra-processed foods.

The term 'ultra-processed food' emerged in the 1980s, mostly used in reference to highly-processed convenience foods and snacks, often energy-dense, poor in nutrients, and inclusive of various synthetic additives such as emulsifiers, colors, artificial sweeteners, and/or flavor enhancers. Concern over such foods was part of the growing holistic and environmental health movements of the 1970-80s; yet, those who raised alarm about the encroachment of ultra-processed foods were often labeled, especially by industry and their powerful allies, as 'food faddists' and 'pseudoscientists'. Today, the topic of ultra-processed foods is generating massive personal, public, and planetary health interest. However, other than discussing the history of the NOVA food classification system, a useful tool that has allowed researchers to more accurately separate foods based on processing, most lay media and academic articles are ahistorical. That is, there is a tendency to present the term ultra-processed food(s) as a relatively new entrance into the lexicon, and by default, the idea that health-related pushback on ultra-processed foods is a relatively new phenomenon. This omission overlooks decades of determined advocacy and clinical work, much of it by pioneers within the holistic medicine (now integrative, functional, and lifestyle medicine) movement. Here in this reflection paper, the authors will use historical research and reporting to fill in the historical gap and articulate the saliency of why it matters.

Quantitative Risk Assessment of Salmonella in Breaded Pork Products in China.

Pork products were the most common media of Salmonella in China, breaded pork products as a very popular meat presently, whose Salmonella risk should be drawn to attention. Given that quantitative risk assessment is a more scientific method for risk evaluation, a quantitative risk assessment model of Salmonella in breaded pork products was first constructed from processing to consumption, and was used for assessing the risk and the effective interventions in this study. The data of Salmonella contamination in breaded pork products during processing were obtained from the actual detection data of samples from a representative meat processing plant. With combining the predictive microbial modeling and dose-response relationship, the risk of Salmonella in breaded pork products was charactered, and the probability of Salmonella infection per meal was found to be 5.585 × 10-9. Based on the results of sensitivity analysis, the curing and seasoning process was found to be the key control point for Salmonella contamination during the processing, and consumer behavior was the key control point affecting the probability of Salmonella infection from processing to consumption. The model was also applied for assessing the effectiveness of risk interventions, and among the nine interventions given, control of thawing temperature before cooking such as microwave thawing could reduce the risk of infection by 30.969-fold, while cooking the products thoroughly, Salmonella would not pose a pathogenic hazard to consumers. The model and the assessed results in this study may provide guidance on microbial control in producing process and safety consumption of breaded pork products.

Food handlers' knowledge, attitudes and self-reported practices regarding safe food handling in charitable food assistance programmes in the eThekwini District, South Africa: cross-sectional study.

OBJECTIVE: This study aimed to assess food handlers' knowledge, attitudes and self-reported practices towards safer donated foods. DESIGN: This cross-sectional study was conducted from January to May 2021. SETTING: This study was conducted in the eThekwini District, South Africa. PARTICIPANTS: A convenience sampling-based cross-sectional survey of food handlers (n=252) served as the study's main source of data. A total of eight study sites across five municipal planning regions of eThekwini District were visited. The principal investigator administered the validated structured standardised questionnaire, using participants' language of choice, which was either English or isiZulu. All the questions in the questionnaire were asked in exactly the same manner, following the same flow, in order to avoid bias and ensure consistency. Furthermore, the close-ended nature of questions in the questionnaire mitigated the risks of question manipulation. The questionnaire was adapted from the WHO's five keys to a safer food manual. PRIMARY AND SECONDARY OUTCOME MEASURES: The primary outcome was the knowledge, attitudes and self-reported practices towards safer donated foods. The secondary outcomes were the sanitary conditions of infrastructure and facilities, food handlers' observed food handling behaviour and nutritional information/labelling. RESULTS: The results show that the food handlers had good knowledge, positive attitude and acceptable behaviours towards safe food handling and general hygiene, with mean scores (SD) of 62.8 (14.6), 92.5 (14.1) and 80.4 (13.3), respectively. Significant correlations were found between knowledge and attitudes (p=0001), knowledge and practices (p<0001), and attitudes and practices (p=0.02). However, the correlations between knowledge versus attitude and attitude versus practice were poor (Spearman's r<0.3), and the association between knowledge versus practice was moderate (0.3-0.7). The majority of food handlers (92.5%) did not understand the value of thorough cooking and temperature control. About 53% of respondents acknowledged to never adequately reheating cooked meals, 5% did not see the significance of preventing cross-contamination and 5% were unsure. CONCLUSIONS: Despite the relatively positive knowledge, attitude and practice levels of the food handlers, safe food handling and hygiene practices, such as thorough cooking and temperature control, properly reheating cooked meals and taking precautions to prevent cross-contamination, require some emphasis.

Environmental and economic sustainability of fresh-cut and pre-cooked vegetables.

Due to the growing awareness about the environmental and economic sustainability of food products, the present research aims to evaluate the sustainability of fresh-cut and pre-cooked vegetables, a niche market with growing demand. An analysis was carried out using a detailed material, energy, and economic inventory based on a commercial food processing plant located in northeast Spain. The environmental sustainability was determined using process-based environmental life cycle assessment (E-LCA), applying a cradle-to-market approach, and using the EF3.0 impact assessment methodology to quantify impacts on five midpoint categories (climate change, photochemical ozone formation, acidification, freshwater eutrophication, and fossil resource use) and an aggregated single score. Additionally, an environmental life cycle costing (E-LCC) was performed. The pre-cooked vegetable products showed a higher environmental footprint than the fresh-cut products in all the impact categories (between 14.0 % and 39.9 %) and involved higher life cycle costs (15.2 %), due to the increased demand for ingredients, packaging materials, and electricity consumption per FU (kg of product). The carbon footprint (CF) and the cost for the fresh-cut products were 0.72 kg CO2 eq/kg and 2.62 €/kg, respectively, compared to 0.86 kg CO2/kg and 3.02 €/kg for the pre-cooked vegetables. The environmental profiles of both products were rather similar, with a dominance of the Upstream stage (production of ingredients and packaging materials), followed by the Core stage (mainly due to electricity consumed during vegetable processing). The relevance of the Core stage is amplified in the economic analysis due to the incorporation of certain processes which were not included in the process-based E-LCA (e.g., labour, capital, insurance, maintenance costs, etc.). To integrate the economic and environmental analyses, an eco-efficiency index was calculated that describes the carbon emissions per unit of monetary cost, resulting in 0.27 kg CO2eq/€ for the fresh-cut and 0.28 kg CO2 eq/€ for the pre-cooked vegetables.

Nutritional, antioxidant, and antimicrobial assessment of carrot powder and its application as a functional ingredient in probiotic soft cheese.

Carrots (the main source of carotenoids) have multiple nutritional and health benefits. The objectives of this study were to evaluate the compositional, antioxidant, and antimicrobial properties of carrot powder and to examine its effect on the sensory characteristics, chemical properties, and microbial viability of probiotic soft cheese at a rate of 0.2, 0.4, and 0.6%. The carrot was turned into powder before being analyzed and incorporated as an ingredient in making probiotic soft cheese. Probiotic soft cheese was made from buffalo milk. The buffalo milk (∼6.9% fat, 4.4% protein, 9.2% milk solids not fat, and 0.7% ash) was pasteurized at 75 ± 1°C for 5 min and cooled to 40-42°C. The milk was then divided into 4 aliquots. Sodium chloride (local market, Assiut, Egypt) was added at a ratio of 5% followed by starter cultures. The carrot powder (4.5% moisture, 4.8% ash, 2.7% fat, 8.2% protein, 11.9% fibers, and 72.3% carbohydrate) was added at a rate of 0.2, 0.4, and 0.6%, followed by addition of 0.02 g/kg rennet. The cheese was cut again into cubes, pickled in jars filled with whey, and stored for 28 d at 6 ± 1°C. The results of this study illustrated the nutritional and antioxidant properties of carrot powder. Incorporation of carrot powder in probiotic soft cheese affected the moisture and salt content at 0 d. The total bacteria count decreased from 7.5 to 7.3 log cfu/g in the cheese when carrot powder was used at a rate of 0.6%. The reduction of total bacteria count was noticed during the 28 d of storage by adding carrot powder. Furthermore, lactic acid bacteria and Bifidobacterium longum counts elevated with adding carrot powder during the 28 d of storage.

Quantitative microbiological risk assessment of nontyphoidal Salmonella in ground pork in households in Chengdu, China.

Foodborne disease caused by nontyphoidal Salmonella (NTS) is one of the most important food safety issues worldwide. The objectives of this study were to carry out microbial monitoring on the prevalence of NTS in commercial ground pork, investigate consumption patterns, and conduct a quantitative microbiological risk assessment (QMRA) that considers cross-contamination to determine the risk caused by consuming ground pork and ready-to-eat food contaminated during food handling in the kitchen in Chengdu, China. The food pathway of ground pork was simplified and assumed to be several units according to the actual situation and our survey data, which were collected from our research or references and substituted into the QMRA model for simulation. The results showed that the prevalence of NTS in ground pork purchased in Chengdu was 69.64% (95% confidence interval [CI], 60.2-78.0), with a mean contamination level of -0.164 log CFU/g. After general cooking, NTS in ground pork could be eliminated (contamination level of zero). The estimated probability of causing salmonellosis per day was 9.43E-06 (95% CI: 8.82E-06-1.00E-05), while the estimated salmonellosis cases per million people per year were 3442 (95% CI: 3218-3666). According to the sensitivity analysis, the occurrence of cross-contamination was the most important factor affecting the probability of salmonellosis. To reduce the risk of salmonellosis caused by NTS through ground pork consumption, reasonable hygiene prevention and control measures should be adopted during food preparation to reduce cross-contamination. This study provides valuable information for household cooking and food safety management in China.

Nutritional value, productive performance, and economic efficiency response to the degree of steam-flaked yellow corn in growing rabbits.

The performance of a corn steam flaker was evaluated to improve steam-flaked corn (SFC) quality and investigate its feeding effects on nutritional value, productive performance, digestibility coefficients, and economic efficiency of growing rabbits. The flaker performance was studied as a function of change in steaming time, steam chest temperature and roll gap. Performance evaluation of the flaker was carried out in terms of flake thickness (FT), flake density (FD) and processing index (PI) as well as rabbit feeding trials. Experimental results clarified that values of FT, FD and PI are in the optimal limits under conditions of 118°C steam chest temperature, 40 min steaming time and 0.80 mm roll gap. Steam flaking is an acceptable process for rabbit feeds as SFC with optimal FD of between 0.36 and 0.39 kg/L corresponding to a PI of between 50.14% and 54.32% significantly improve the nutritional value of SFC compared with whole corn grain by 1.31%, 1.26% and 160.75% respectively. Also, SFC severely decreased the total count of harmful bacteria, fungi count and mortality rate compared to whole corn grain. Rabbits fed SFC processed to the density of 0.36 kg/L of the diet had better body weight gain, feed conversion ratio, organic matter digestibility, net revenue and economic efficiency of 9.29%, 8.89%, 4.65%, 15.62% and 15.43% compared with rabbit fed whole yellow corn grain respectively. In conclusion, it is convenient to entirely substitute whole corn grain with SFC to be utilised in rabbits' diets where achieved the best feeding effects results.

A comprehensive review of the principles, key factors, application, and assessment of thawing technologies for muscle foods.

For years, various thawing technologies based on pressure, ultrasound, electromagnetic energy, and electric field energy have been actively investigated to minimize the amount of drip and reduce the quality deterioration of muscle foods during thawing. However, existing thawing technologies have limitations in practical applications due to their high costs and technical defects. Therefore, key factors of thawing technologies must be comprehensively analyzed, and their effects must be systematically evaluated by the quality indexes of muscle foods. In this review, the principles and key factors of thawing techniques are discussed, with an emphasis on combinations of thawing technologies. Furthermore, the application effects of thawing technologies in muscle foods are systematically evaluated from the viewpoints of eating quality and microbial and chemical stability. Finally, the disadvantages of the existing thawing technologies and the development prospects of tempering technologies are highlighted. This review can be highly instrumental in achieving more ideal thawing goals.

A roadmap for developing educational actions using food safety culture assessment - A case of an institutional food service.

Food safety (FS) culture has been recognised as a phenomenon that can shape food safety behaviour. Specific educational actions can improve food safety behaviour. This study aimed to build a roadmap to guide the development of educational actions based on the assessment of the prevailing FS-culture. The study was conducted in an institutional food service in the Brazilian air force. A previously-developed mixed-methods and data triangulation approach was used to assess the FS-culture based on eight elements (leadership, communication, knowledge, commitment, risk perception, work pressure and normative beliefs, work environment, and management systems, styles, and process). The roadmap was designed based on a combination of the FS-culture element score (1-reactive, 2-active, and 3-proactive) and priority levels (highest, moderate, lowest, and no priority) of proposed topics to be included in educational actions. Such topics were based on specific literature about food safety culture and the behaviour of food handlers. The FS-culture diagnosis in the air force food service demonstrated an "active to proactive" FS-culture; the element "work pressure and normative beliefs" showed the highest score (3 - proactive), whereas "risk perception" and "management systems, styles, and process" indicated the lowest scores (1-2 - reactive to active). Based on the weaknesses and strengths in the prevailing FS-culture, the roadmap revealed that the topics showing the lowest scores, "risk perception" and "management systems, styles, and process," had the highest priority to be included in the educational actions. The designed roadmap may support food services in making decisions about food safety education towards a proactive FS-culture.

Prevalence of Intestinal Parasite Infections and Their Associated Factors among Food Handlers Working in Selected Catering Establishments from Bule Hora, Ethiopia.

Intestinal parasites are responsible for one of the major health problems like food contamination with socioeconomic effects in the world with a prevalence rate of 30-60%, in developing countries that lie within tropical and subtropical areas. They pose a reasonable public health burden, particularly in low- and middle-income countries, including Ethiopia. Globally, due to intestinal parasitic infections, around 3.5 billion people are affected and more than 200,000 deaths are reported annually. Around 50000 deaths yearly are caused by intestinal parasites in Ethiopia. As such, intestinal parasites perceived global and local burdens to various countries. The risk of food contamination depends largely on the health status of the food handlers, their hygiene, knowledge, and practice of food hygiene. Food handlers with poor personal hygiene and sanitation conditions are the major potential sources of intestinal helminthes and protozoa worldwide. The proposed study was aimed at evaluating prevalence of intestinal parasitic infections and their associated factors among food handlers working in selected catering establishments. A cross-sectional study was conducted in Bule Hora Town from March to April 2020. A total of 136 catering establishments were selected using a systematic sampling technique. Data analysis was done using SPSS version 20. The prevalence of intestinal parasites in this study was 46.3%. Entamoeba histolytica was the most predominant parasite (33.3%, i.e., 21/63) while Giardia lamblia was the least (11.1%, i.e., 7/63). Consumption of vended or borehole water and hygienic practices such as hand washing before eating, after using toilet, before cooking and trimming of finger nail and wearing proper working clothes and shoes were statistically significant with intestinal parasitic infection (P < 0.05). Generally, the prevalence of intestinal parasitic infection in this study was high and contributed by low socioeconomic status and poor environmental and personal hygiene. Measures including education on personal hygiene, environmental sanitation, drinking water supply, regular medical checkups, and treatment should be taken into account to reduce the prevalence of intestinal parasites.

Descriptive sensory analysis of instant porridge from stored wholegrain and decorticated pearl millet flour cooked, stabilized and improved by using a low-cost extruder.

Pearl millet flour, particularly wholegrain flour, is highly susceptible to development of rancid aromas and flavors during storage. Grain decortication and extrusion cooking using a friction-heated single-screw extruder were investigated as potential flour stabilization processes. Raw and extruded wholegrain and decorticated grain pearl millet flours were stored at ambient (25°C) and elevated (40°C) temperatures for 6 months. A trained descriptive sensory panel developed a lexicon of 44 attributes to profile the aroma, flavor, and texture of porridges prepared from the flours. Grain decortication alone did not show an effect on the aroma and flavor profile of porridge. Extrusion cooking of both wholegrain and decorticated flours increased cereal-like aromas (branny, canned sweetcorn, sweet, and wheaty) and flavor (starchy), as well as stiffness and cohesiveness of the porridges. The porridges from the extruded pearl millet flours stored for up to 6 months at ambient and elevated temperatures did not show any indications of rancidity. In contrast, rancidity-associated aromas (chemical, painty, and soapy) and flavor (chemical) increased in porridges from the raw flours stored for 4 weeks and longer. These results indicate that grain decortication did not sufficiently reduce fat content to prevent oxidation, while extrusion cooking stabilized the pearl millet flours. In addition, intensified "cereal-like" aromas and flavors were probably due to Maillard reactions occurring during extrusion cooking. Resulting aroma compounds could have been immobilized in the extruded matrix and not released during flour storage. The application of extrusion cooking with a simple friction-heated single-screw extruder is a viable process for both precooking and extending the shelf life of pearl millet flours. PRACTICAL APPLICATION: This study demonstrates the potential of extrusion cooking to precook wholegrain pearl millet while preventing fat rancidity in wholegrain pearl millet flour, thereby improving the sensory quality and stability of pearl millet food products. The extensive sensory characterization of pearl millet porridge-type foods can serve as a guidance tool for development, improvement, and quality control of pearl millet foods. Furthermore, it establishes the efficacy of simple friction-heated, single-screw extruders for commercial manufacture of ready-to-eat wholegrain pearl millet food products by small and medium scale entrepreneurs.