Quantitative discoloration assessment of peri-implant soft tissue around zirconia and other abutments with different colours: A systematic review and meta-analysis.

OBJECTIVES: The implant abutments, which had their own colour, might cause the discoloration of peri-implant mucosa. We aimed to appraise trails comparing the discoloration of peri-implant soft tissue around zirconia and titanium or golden abutments, the tints of which were vastly different. DATA: We included randomized controlled trials (RCTs), controlled clinical trials (CCTs), cohort studies with patients rehabilitated with zirconia, titanium or golden implant abutments, quantitatively comparing the discoloration of peri-implant soft tissue according to CIE-Lab colour scale. SOURCES: A systematic search was conducted in PubMed, EMBASE, CDSR, and CENTRAL databases without any restriction on September 23, 2017. "Grey" literatures were also searched. A manual search was carried out as well. STUDY SELECTION: Of 584 articles initially retrieved, eight were eligible for inclusion. After data extraction, meta-analyses with mean differences (MDs) and their 95% confidence intervals (CIs) were employed. Moreover, the risk of bias within or across studies was assessed by Cochrane Collaboration's tool for assessing risk, the Newcastle-Ottawa scale, funnel plots, or Egger's test. RESULTS: Four RCTs and four cohort studies were included. Soft-tissue discoloration around zirconia abutments was significantly less likely compared to that around titanium abutments (MD = -1.84; 95% CI = -3.62 to -0.07; P = 0.04 < 0.05) or golden abutments (MD = -0.90; 95% CI = -1.60 to -0.20; P = 0.01 < 0.05). CONCLUSIONS: Zirconia abutments with white tint compared to grey titanium or golden abutments seem to restore a more appropriate colour match between peri-implant mucosa and natural teeth. CLINICAL SIGNIFICANCE: Based on the present evidence, the "nature-like" zirconia abutments should be applied more often in the clinic. PROSPERO REGISTRATION NUMBER: CRD42017075930.

Clinical assessment of enamel wear caused by monolithic zirconia crowns.

The purpose of this study was to measure enamel wear caused by antagonistic monolithic zirconia crowns and to compare this with enamel wear caused by contralateral natural antagonists. Twenty monolithic zirconia full molar crowns were placed in 20 patients. Patients with high activity of the masseter muscle at night (bruxism) were excluded. For analysis of wear, vinylpolysiloxane impressions were prepared after crown incorporation and at 6-, 12-, and 24-month follow-up. Wear of the occlusal contact areas of the crowns, of their natural antagonists, and of two contralateral natural antagonists (control teeth) was measured by use of plaster replicas and a 3D laser-scanning device. Differences of wear between the zirconia crown antagonists and the control teeth were investigated by means of two-sided paired Student's t-tests and linear regression analysis. After 2 years, mean vertical loss was 46 µm for enamel opposed to zirconia, 19-26 µm for contralateral control teeth and 14 µm for zirconia crowns. Maximum vertical loss was 151 µm for enamel opposed to zirconia, 75-115 µm for control teeth and 60 µm for zirconia crowns. Statistical analysis revealed significant differences between wear of enamel by zirconia-opposed teeth and by control teeth. Gender, which significantly affected wear, was identified as a possible confounder. Monolithic zirconia crowns generated more wear of opposed enamel than did natural teeth. Because of the greater wear caused by other dental ceramics, the use of monolithic zirconia crowns may be justified.

What's in a bin: A case study of dental clinical waste composition and potential greenhouse gas emission savings.

BACKGROUND: Dental practices have a unique position as dental staff use a high number of dental materials and instruments on a daily basis. It is unclear how dentists' and dental care professionals' choices and behaviours around selecting and using materials impact on the amount of unnecessary waste production. Although there are a number of articles exploring the quality and quantity of waste in dental practices, there are no studies on organisational strategies to decrease unnecessary waste. There is no clear economic analysis of the impact on associated cost to dental practices which consequently can affect the access of dental care for disadvantaged groups. METHODS: This study used an audit approach to explore the potential for sustainability in dental practice by measuring the nature and quantity of dental clinical waste, and assessing the feasibility of measuring the financial costs and potential carbon savings in the management of dental clinical waste. CONCLUSIONS: The data from our study would appear to support the view that it is possible to reduce carbon emissions and increase profitability. Successful implementation of an environmentally sustainable approach to waste management will be dependent on the practicalities involved and the financial incentives for adopting such practices.

Reliance on social security benefits by Swedish patients with ill-health attributed to dental fillings: a register-based cohort study.

BACKGROUND: Some people attribute their ill health to dental filling materials, experiencing a variety of symptoms. Yet, it is not known if they continue to financially support themselves by work or become reliant on different types of social security benefits. The aim of this study was to analyse reliance on different forms of social security benefits by patients who attribute their poor health to dental filling materials. METHODS: A longitudinal cohort study with a 13-year follow up. The subjects included were 505 patients attributing their ill health to dental restorative materials, who applied for subsidised filling replacement. They were compared to a cohort of matched controls representing the general population (three controls per patient). Annual individual data on disability pension, sick leave, unemployment benefits, and socio-demographic factors was obtained from Statistics Sweden. Generalized estimating equations were used to test for differences between cohorts in number of days on different types of social security benefits. RESULTS: The cohort of dental filling patients had a significantly higher number of days on sick leave and disability pension than the general population. The test of an overall interaction effect between time and cohort showed a significant difference between the two cohorts regarding both sick leave and disability pension. In the replacement cohort, the highest number of sick-leave days was recorded in the year they applied for subsidised replacement of fillings. While sick leave decreased following the year of application, the number of days on disability pension increased and peaked at the end of follow-up. CONCLUSIONS: Ill health related to dental materials is likely to be associated with dependence on social security benefits. Dental filling replacement does not seem to improve workforce participation.

Assessment of allergic hypersensitivity to dental materials.

Some metallic materials in dental prostheses may cause allergic hypersensitivity. Symptoms appear not only in the oral cavity, but also on hands, feet or the entire body. Release of metal ions is thought to cause the allergic reactions; micro-particles of the corrosion products of the metal and/or ionic metal hydroxides/oxides may be the allergens. The study purpose was to review clinical surveillance of dental allergic hypersensitivity in our dental hospital. From July 2000 to June 2005, 212 patients with suspected dental metal allergy were patch tested with 26 reagents, including 19 ready-made patch test reagents (Patch test reagents, Torii Pharmaceutical Corporation, Tokyo, Japan) and 9 custom-made reagents. One-hundred-and-sixty-seven patients were females (78.8%) and 45 patients were males (21.2%). A total of 148 patients (69.8%) had one or more positive patch test reactions. The most common allergens were nickel (25.0%), palladium (24.4%), chromium (16.7%), cobalt (15.9%) and stannum (12.5%). Typical allergic symptoms and diagnoses were Pustulosis palmaris et plantaris, lichen planus, stomatitis and contact dermatitis. This study indicates that dentists and dental researchers should be concerned about the allergenic potential of dental metal materials.

[Dental materials. A critical assessment from the viewpoint of alternative medicine]. / Zahnärztliche Materialien. Eine kritische Wertung aus komplementärmedizinischer Sicht.

Practical experience with unconventional treatments suggests that the paradigm used by conventional medical science to assess the impact of dental materials must be broadened. First, several diagnostic methods commonly employed to evaluate allergies and toxicological burdens are described and subjected to a critical analysis. These diagnostics include test methods used in the field of complementary medicine in addition to the traditional epicutaneous tests, the Lymphocyte Transformation Test and quantitative analysis of blood and urine. Finally, the fundamentals of toxicology in the low-dose range are discussed; in this context special attention is paid to possible factors enhancing the effect of various substance groups. The impact of dental materials is also viewed from the perspective of environmental toxicology. In addition, the authors discuss various paradigms for obtaining evidence of multifactorial causes and show why nonuniform results are obtained with dental materials. Reference is also made to new theories broadening our understanding of biological processes such as the Biphoton Theory, which has been the subject of increased discussion among quantum physicists in recent years. It becomes evident in this context that there are to date no evidence-based methods for demonstrating the absolute non-toxicity of dental materials. Finally, it is shown - on the basis of various reports provided by a practitioner of complementary medicine in private practice - that, in patients with chronic diseases, unconventional therapies integrating these insights may by the only effective therapeutic options to succeed.

Single-cell gel (comet) assay as a promising tool for the detection of DNA damage induced by compounds used in dental practice: the oral cancer risk assessment.

Taking into consideration genetic damage plays an important role in oral carcinogenesis, the purpose of this article is to provide an overview on the application of single-cell gel (comet) assay as a promising tool for the detection of DNA damage induced by some compounds used in dental practice as far as to assess the oral cancer risk. The single-cell gel (comet) assay is a microgel electrophoresis technique able to detect DNA damage at the level of single cells. In the alkaline version, which is mainly used, DNA single-strand breaks, DNA double-strand breaks, alkali-labile sites, and single-strand breaks containing incomplete excision repair sites cause increased DNA migration. Therefore, this interesting methodology estimates the risk of these substances with respect to genotoxicity, and will be added to those used for regulatory purposes in improving oral health and preventing oral carcinogenesis.

[Complex approach to the problem of individual intolerance of orthodontic constructions made of different materials]. / Kompleksnyi podkhod k probleme individual'noi neperenosimosti stomatologicheskikh konstruktsii iz razlichnykh materialov.

The problem of intolerance of materials used in dentistry is reviewed in brief. Characteristic situations when this intolerance manifests are described. Approaches (practical and organizational) which can help reduce the incidence of individual intolerance of dentures and materials used in dentistry are outlined. Methods for individual selection of materials are analyzed. The possibility of using electropuncture methods for this purpose is demonstrated. Arguments in favor of creating a special laboratory for studies of specific problems of dentistry are presented and the list of problems to be solved by this laboratory is offered.

Assessment of genetic damage by methyl methacrylate employing in vitro mammalian test system.

Methyl methacrylate (MMA) is a volatile liquid widely used in the manufacture of acrylic polymers. In modern dentistry, MMA is the mainstream material in denture bases. MMA has been implicated as primary irritant and sensitizer, which can cause allergic eczematous reaction on the oral mucosa as well as skin. To date, there is growing concern that MMA may produce genetic damage by inducing mutation. In this study, colony forming efficiency, DNA synthesis, and cytogenetic assays were performed to investigate the adverse effects of MMA in cultured CHO cells. MMA was found to decrease colony formation in a dose- and time-dependent manner (P<0.05). MMA also inhibited DNA synthesis in a dose-dependent manner (P<0.05). The chromosome aberrations induced by MMA were the chromatid-type aberrations in the treated cultures. Moreover, the gaps and breaks were the most common type of aberrations observed. The sister-chromatid exchange frequencies were found to increase in the concentration of MMA. In this study, MMA was found to be not only a cytotoxic agent but also a genotoxic agent. The effects observed following treatment with low dose for longer duration is of relevance to the condition of the oral mucosa of the denture wears. Denture base resin could constantly release MMA extended periods, possibly causing moderate toxic reactions and possibly contributing to adverse effects on the mucosa.

Proposition 65 in the dental office.

In the mid-1990s, dentistry became included in enforcement activity for Proposition 65, the Safe Drinking Water and Toxic Enforcement Act of 1986. This year, 80 dental offices were served with 60-day notices for failing to post Prop. 65 warnings. The California Dental Association has been inundated with inquiries on what dental offices should be doing with regard to Prop. 65 requirements. This article provides a brief history of Prop. 65 and answers the questions most frequently asked of CDA.

Tooth slice organ culture for cytotoxicity assessment of dental materials.

The purpose of this work was to develop a tooth slice organ culture method to assess the response of the cells of the dental pulp to commonly used dental materials and products. Wistar rat tooth slices were grown in culture for two and ten days in the presence of dental materials. After culture, the tooth tissues were processed and the responses of the pulpal cells were analysed histomorphometrically. Cytotoxic cell destruction was observed following the direct application of test materials to tooth slices (n = 298) after 10 days in culture (MANOVA, P = 0.0001), whilst the restoration of prepared deep dentine cavities (n = 30), with test products, did not result in a significant amount of pulpal injury (MANOVA, P = 0.287). In rank order of causing pulpal injury, the test materials from the most to the least cell destructive, was; Salicylic acid. Calcium hydroxide, Kalzinol zinc oxide eugenol, high-mercury Amalgam, Prime & Bond, Dycal, Barium sulphate, Hypocal, Scotchbond, Calasept, Life and One-step. Tooth slice organ culture, provided a cytotoxicity screening method for dental materials, bearing a closer physiological resemblance to the clinical situation than cell culture screening methods. Tooth slice culturing may have the potential to replace some types of in vivo animal experimentation, as there is a clear need to reduce this form of testing.

Model for quantitative immunohistochemical assessment of pulpal response to biomaterials.

The purpose of this study was to propose a new method for quantitative evaluation of the pulpal inflammation to restorative materials using immunohistochemistry and image analysis. Class V cavities were prepared and filled with different restorative materials in 20 healthy premolars to be extracted for orthodontic reasons. Teeth were extracted at different time intervals, fixed, demineralized, and embedded in paraffin. Six-micrometer-thick sections were cut serially and mounted on slides and every fifth section was stained using hematoxylin and eosin or Masson's trichrome, and served to localize the inflammatory reaction. The slides corresponding to the bulk of the inflammatory reaction were then used for immunohistochemical detection of the inflammatory cells using monoclonal antibodies: CD15 (granulocytes and histiocytes), CD45RO (T lymphocytes and monocytes), Pan-B cell (B lymphocytes, macrophages, and a subpopulation of T lymphocytes), CD45RA (B lymphocytes and monocytes), and EMA (plasma cells). The slides were observed and submitted to computerized image analysis using a SAMBA 2000 system for counting of the cells. The CD15, CD45RO, Pan-B-cell, and CD45RA antibodies positively stained the target cells, which could be counted with the computer. The EMA antibody did not permit staining of cells. These results indicate that polymorphonuclears, T lymphocytes, and B lymphocytes are present in inflamed human dental pulp. The immunologic detection of inflammatory cells followed by computerized image analysis allows an accurate characterization of pulpal pathology, and could be useful for the study of pulp reactions to restorative biomaterials.

Problems and benefits associated with restorative materials: side-effects and long-term cost.

The paper reviews data on biological side-effects of dental materials on patients and also on personnel who routinely handle the materials. The incidence of adverse effects is low--in one study indicated to be 1:700 for all types of treatments. For individual types of materials, it will be significantly lower, and for restorative materials, probably in the 1:10,000 to 1:20,000 range. Allergic reactions are the most common type of adverse effect of dental materials. Lichenoid reactions on the oral mucous membrane adjacent to amalgam restorations are the most frequently encountered side-effects for a specific group of restorative materials. Cost analyses were based on reports of longevity of different restorations and the cost of restorations at the time of placement. Amalgam restorative therapy was more cost-effective than composite restorations and gold castings.