Atmospheric gaseous mercury and associated health risk assessment in the economic capital of India.

Mercury cycling in coastal metropolitan areas on the west coast of India becomes complex due to the combined effects of both intensive domestic anthropogenic emissions and marine air masses. The present study is based on yearlong data of continuous measurements of gaseous elemental mercury (GEM) concentration concurrent with meteorological parameters and some air pollutants at a coastal urban site in Mumbai, on the west coast of India, for the first time. The concentration of GEM was found in a range between 2.2 and 12.3 ng/m3, with a mean of 3.1 ± 1.1 ng/m3, which was significantly higher than the continental background values in the Northern Hemisphere (~ 1.5 ng/m3). Unlike particulates, GEM starts increasing post-winter to peak during the monsoon and decrease towards winter. July had the highest concentration of GEM followed by October, and a minimum in January. GEM exhibited a distinct diurnal cycle, mainly with a broad peak in the early morning, a narrow one by nightfall, and a minimum in the afternoon. The peaks and their timing suggest the origin of urban mobility and the start of local activities. A positive correlation between SO2, PM2.5, temperature, relative humidity, and GEM indicates that emissions from local industrial plants in the Mumbai coastal area. Principal component analysis (PCA) and cluster analysis (CA) confirm this fact. Monthly back trajectory analysis showed that air mass flows are predominantly from the Arabian Sea and local human activities. Assessment of human health risks by USEPA model reveals that the hazardous quotient, HQ < 1, implies negligible carcinogenic risk. GEM observations in Mumbai during the study period are below the World Health Organization's (WHO) safe limit (200 ng/m3) for long-term inhalation.

Risk assessment of some toxic metals in canned fish products retailed in Mansoura, Egypt.

Background: Canned fish products are widely consumed in Egypt, particularly for protein-rich meals that are quick to prepare and low in calories. Canned fish products are contaminated with toxic metals from the fish itself or from canning materials during processing. Aim: To determine the residual levels of cadmium (Cd), lead (Pb), arsenic (As), mercury (Hg), aluminum (Al), and Tin (Sn) in some canned fish products obtained from retail shops in Mansoura, Egypt. Furthermore, noncarcinogenic health risks evaluation for the Egyptian population due to hazardous metal oral intake. Methods: One hundred canned fish products (20 each of herring, mackerel, salmon, sardine, and tuna) were collected from May to September 2023, and canned fish products were obtained from Mansoura city markets in Egypt. Samples were digested in a solution composed of 60% nitric acid and 40% perchloric acid, and then an atomic absorption spectrophotometer was used for the detection of selected toxic metals. Results: It was found that the residual level of hazardous metals exceeded the acceptability level established in the European Union for Pb, Cd, and Hg by 20%, 10%, and 10%, 15%, 5%, and 20%, 35%, 30%, and 45%, 25%, 25%, and 40%, in examined herring, mackerel, sardine, and tuna, respectively. In contrast, all salmon samples were accepted for Pb and Hg, and only 5% were not accepted due to a higher Cd level than the maximum permissible limit. The average estimated daily intake of (EDI) is below the tolerable daily intakes (TDIs) for all metals. Comparatively, the EDI of Hg was 0.265 µg/kg body weight (B.W) exceeded TDIs 0.228 µg/kg B.W. The hazard index for canned tuna and sardines is more than one. Conclusion: Canned fish products are contaminated with a variety of toxic metals, especially sardine and tuna. Therefore, it is advised to decrease the consumption rate of such fish products.

Occurrence, distribution, and ecological risk assessment of heavy metals in Chao Phraya River, Thailand.

Understanding heavy metals in rivers is crucial, as their presence and distribution impact water quality, ecosystem health, and human well-being. This study examined the presence and levels of nine heavy metals (Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) in 16 surface water samples along the Chao Phraya River, identifying Fe, Mn, Zn, and Cr as predominant metals. Although average concentrations in both rainy and dry seasons generally adhered to WHO guidelines, Mn exceeded these limits yet remained within Thailand's acceptable standards. Seasonal variations were observed in the Chao Phraya River, and Spearman's correlation coefficient analysis established significant associations between season and concentrations of heavy metals. The water quality index (WQI) demonstrated varied water quality statuses at each sampling point along the Chao Phraya River, indicating poor conditions during the rainy season, further deteriorating to very poor conditions in the dry season. The hazard potential index (HPI) was employed to assess heavy metal contamination, revealing that during the dry season in the estuary area, the HPI value exceeded the critical threshold index, indicating the presence of heavy metal pollution in the water and unsuitable for consumption. Using the species sensitivity distribution model, an ecological risk assessment ranked the heavy metals' HC5 values as Pb > Zn > Cr > Cu > Hg > Cd > Ni, identifying nickel as the most detrimental and lead as the least toxic. Despite Cr and Zn showing a moderate risk, and Cu and Ni posing a high risk to aquatic organisms, the main contributors to ecological risk were identified as Cu, Ni, and Zn, suggesting a significant potential ecological risk in the Chao Phraya River's surface water. The results of this study provide fundamental insights that can direct future actions in preventing and managing heavy metal pollution in the river ecosystem.

Metals concentration and human health risk assessment in some fish species from the southern Caspian Sea.

The main objectives of this study were to determine the mercury concentration in four species of valuable and widely consumed fish from the Caspian Sea, to assess the health risk due to their consumption. The average mercury concentrations for Chelon saliens, Chelon auratus, Acipenser persicus and Acipenser stellatus were 32.72, 39.51, 166.87 and 81.87 µg g-1 dw, respectively. There were correlations between the mercury concentrations in the muscle of Chelon saliens and morphological parameters, but these correlations were not observed in Chelon auratus. Our comparison of the mercury values obtained in all the samples with the recommended international standards, as well as the Hazard Quotients values, indicated that there is no potential risk for the health of consumers due to exposure to mercury from consuming these fish.

Development of a green and low-cost method to determine mercury content in sediments affected by oil spill on the Brazilian coast.

Tons of crude oil were found on the Brazilian coast in 2019, and studies assessing its chemical composition are still scarce. This study aimed to develop a new and simple technique of cold vapor generation using infrared irradiation coupled with atomic absorption spectrometry to determine mercury content in sediments contaminated by crude oil. Experimental conditions were evaluated, including formic acid concentration, reactor temperature, and carrier gas flow rate. The accuracy of the method was validated by comparison with mercury contents in a certified reference material (PACS-2). The detection limit was found to be 0.44 µg kg-1. The developed method was applied to determine the total mercury content in marine sediment samples collected from beaches in Ceará State. Mercury concentrations ranged from 0.41 to 0.95 mg kg-1. The proposed method is efficient, simple, low-cost, and adequate for its purpose.

Spatiotemporal variations, health risk assessment, and sources of potentially toxic elements in potamic water of the Anday Stream Basin (Türkiye), Black Sea Region.

Monitoring and protecting freshwater habitats are paramount for a sustainable water management perspective. This study investigated potentially toxic elements (PTEs) in the potamic water of the Anday Stream Basin (Türkiye), Black Sea Region, for a hydrological year (from May 2020 to April 2021). Among PTEs, the highest average values were recorded for sodium (Na) at 41.3 mg/L and the lowest for mercury (Hg) at 0.009 µg/L and noted under quality guidelines. The stream was found to be at the level of "Low Heavy Metal Pollution" and "Low Contamination" based on the ecotoxicological risk indices. The highest calculated hazard quotient (HQ) value of 1.21E-02 for Cd was noted in the children via the dermal pathway and the lowest of 6.91E-06 for Fe in adults via the ingestion pathway. Results revealed a higher hazard index (HI) value of 1.50E-02 for Cd to children and the lowest of 1.98E-05 for Fe to adults. As a result of applying agricultural risk indices, the stream showed sodium adsorption ratio values less than 6 and was found to be "Excellent" for agriculture. However, the sodium percentage values were less than 20 and found "Permissible" and the magnesium hazard > 50 and noted as "Unsuitable" for agriculture. Statistical analysis revealed that natural factors mainly attributed to PTE contamination of the Anday Stream Basin.

Human health risks assessment of the fluctuations in mercury levels in seafood from different key regions of Rio de Janeiro, Brazil.

Mercury (Hg) contamination on the Brazilian southeast coast has been highlighted, especially in relation to species of commercial importance. This study aimed to quantify the Hg concentration in species of mussels, fish, and crabs obtained from fishing colonies on the beaches of the west and south of the city of Rio de Janeiro, investigate the possible effect of seasonality, sex, and location sampling, and finally, the risk to consumer health in four different age groups. The difference between cooked and raw commercially available mussel samples was also verified. The main results highlight that the fish presented higher levels of Hg and that the mussel samples sold cooked presented lower levels of Hg when compared to the raw ones. For Micropogonias furnieri, Sardinella brasiliensis, and Callinectes spp., the season variable influenced Hg concentrations, while only for Merluccius merluccius was a difference between the sexes identified, with males having the highest values. Although Hg concentrations in animals were below the permitted limit, consumption of all species exceeded the monthly intake limit for this metal. For the hazard quotient (HQ) calculation, most species presented HQ > 1, especially when ingested by the child population. These results are fundamental for designing consumption strategies for these animals, in order to prioritize the acquisition of some species over others, depending on the location and/or season, for each age group, with the aim of maintaining seafood consumption with minimal risk to the population's health.

Comprehensive life cycle assessment of NH2-functionalized magnetic graphene oxide for mercury removal: Carbon emissions and economic evaluation.

Heavy metals contamination critically affects human health and ecosystems, necessitating pioneering approaches to diminish their adverse impacts. Hence, this study synthesized aminated magnetic graphene oxide (mGO-NH2) for the removal of mercury (Hg) from aqueous solutions. Although functionalized GO is an emerging technology at the early stages of development, its synthesis and application require special attention to the eco-environmental assessment. Therefore, the life cycle assessment and life cycle cost of mGO-NH2 were investigated from the cradle-to-gate approach for the removal of 1 kg Hg. The adsorption process was optimized based on pH, Hg concentration, adsorbent dose, and contact time at 6.48, 40 mg/l, 150 mg/l, and 35 min, respectively, resulting in an adsorption capacity of 184.17 mg/g. Human carcinogenic toxicity with a 40.42% contribution was the main environmental impact, relating to electricity (35.76%) and ethylenediamine (31.07%) usage. The endpoint method also revealed the pivotal effect of the mGO-NH2 synthesis on human health (90.52%). The most energy demand was supplied by natural gas and crude oil accounting for 70.8% and 22.1%, respectively. A 99.02% CO2 emission originated from fossil fuels consumption based on the greenhouse gas protocol (GGP). The cost of mGO-NH2 was about $143.7/kg with a net present value of $21064.8 per kg Hg removal for a 20-year lifetime. Considering the significant role of material cost (>70%), the utilization of industrial-grade raw materials is recommended to achieve a low-cost adsorbent. This study demonstrated that besides the appropriate performance of mGO-NH2 for Hg removal, it is essential that further studies evaluate eco-friendly approaches to decrease the adverse impacts of this emerging product.

Characteristics, source analysis, and health risk assessment of potentially toxic elements pollution in soil of dense molybdenum tailing ponds area in central China.

The issue of potentially toxic elements (PTEs) contamination of regional soil caused by mining activities and tailings accumulation has attracted wide attention all over the world. The East Qinling is one of the three main molybdenum mines in the world, and the concentration of PTEs such as Hg, Pb and Cu in the slag is high. Quantifying the amount of PTEs contamination in soil and identifying potential sources of contamination is vital for soil environmental management. In the present investigation, the pollution levels of 8 PTEs in the Qinling molybdenum tailings intensive area were quantitatively identified. Additionally, an integrated source-risk method was adopted for resource allocation and risk assessment based on the PMF model, the ecological risk, and the health risk assessment model. The mean concentrations of Cu, Ni, Pb, Cd, Cr, Zn, As, and Hg in the 80 topsoil samples ranged from 0.80 to 13.38 times the corresponding background values; notably high levels were observed for Pb and Hg. The source partitioning results showed that PTEs were mainly affected by four pollution sources: natural and agricultural sources, coal-burning sources, combined transport and mining industry sources, and mining and smelting sources. The health risk assessment results revealed that the risks of soil PTEs for adults are acceptable, while the risks for children exceeded the limit values. The obtained results will help policymakers to obtain the sources of PTEs of tailing ponds intensive area. Moreover, it provides priorities for the governance of subsequent pollution sources and ecological restoration.

Human health risk assessment based on a total diet study of daily mercury intake in Chengdu, China.

To assess the total daily mercury intake and main exposure sources of residents, six food groups, including marine fish, freshwater fish, poultry, livestock, vegetables, and cereals, were collected from five districts of Chengdu, China. The median concentrations of total mercury (THg) and methylmercury (MeHg) were 12.8 and 6.94 µg kg-1 ww, respectively. Cereals (32.2%), vegetables (30.5%), and livestock (16.2%) contributed to a much larger extent to the total consumption for the participants in Chengdu. All food categories that contributed the most of THg (2.16 µg day-1) and MeHg 1.44 (µg day-1) to the daily intake in Chengdu were cereals and marine fish, respectively. The total Hazard Ratios values below 1 in this study indicate that there is no health risk associated with Hg ingestion from the consumption of these foods for the residents in Chengdu.

Biomonitoring of mercury and selenium in commercially important shellfish: Distribution pattern, health benefit assessment and consumption advisories.

This study aims to explore the concentrations of Se and Hg in shellfish along the Gulf of Mannar (GoM) coast (Southeast India) and to estimate related risks and risk-based consumption limits for children, pregnant women, and adults. Se concentrations in shrimp, crab, and cephalopods ranged from 0.256 to 0.275 mg kg-1, 0.182 to 0.553 mg kg-1, and 0.176 to 0.255 mg kg-1, respectively, whereas Hg concentrations differed from 0.009 to 0.014 mg kg-1, 0.022 to 0.042 mg kg-1 and 0.011 to 0.024 mg kg-1, respectively. Se and Hg content in bamboo shark (C. griseum) was 0.242 mg kg-1 and 0.082 mg kg-1, respectively. The lowest and highest Se concentrations were found in C. indicus (0.176 mg kg-1) and C. natator (0.553 mg kg-1), while Hg was found high in C. griseum (0.082 mg kg-1) and low in P. vannamei (0.009 mg kg-1). Se shellfishes were found in the following order: crabs > shrimp > shark > cephalopods, while that of Hg were shark > crabs > cephalopods > shrimp. Se in shellfish was negatively correlated with trophic level (TL) and size (length and weight), whereas Hg was positively correlated with TL and size. Hg concentrations in shellfish were below the maximum residual limits (MRL) of 0.5 mg kg-1 for crustaceans and cephalopods set by FSSAI, 0.5 mg kg-1 for crustaceans and 1.0 mg kg-1 for cephalopods and sharks prescribed by the European Commission (EC/1881/2006). Se risk-benefit analysis, the AI (actual intake):RDI (recommended daily intake) ratio was > 100%, and the AI:UL (upper limit) ratio was < 100%, indicating that all shellfish have sufficient level of Se to meet daily requirements without exceeding the upper limit (UL). The target hazard quotient (THQ < 1) and hazard index (HI < 1) imply that the consumption of shellfish has no non-carcinogenic health impacts for all age groups. However, despite variations among the examined shellfish, it was consistently observed that they all exhibited a Se:Hg molar ratio > 1. This finding implies that the consumption of shellfish is generally safe in terms of Hg content. The health benefit indexes, Se-HBV and HBVse, consistently showed high positive values across all shellfish, further supporting the protective influence of Se against Hg toxicity and reinforcing the overall safety of shellfish consumption. Enhancing comprehension of food safety analysis, it is crucial to recognize that the elevated Se:Hg ratio in shellfish may be attributed to regular selenoprotein synthesis and the mitigation of Hg toxicity by substituting Se bound to Hg.

Applications of engineered biochar in remediation of heavy metal(loid)s pollution from wastewater: Current perspectives toward sustainable development goals.

Environmental pollution of heavy metal(loid)s (HMs) caused adverse impacts, has become one of the emerging concerns and challenges worldwide. Metal(loid)s can pose significant threats to living organisms even when present in trace levels within environmental matrices. Extended exposure to these substances can lead to adverse health consequences in humans. Removing HM-contaminated water and moving toward sustainable development goals (SDGs) is critical. In this mission, biochar has recently gained attention in the environmental sector as a green and alternative material for wastewater removal. This work provides a comprehensive analysis of the remediation of typical HMs by biochars, associated with an understanding of remediation mechanisms, and gives practical solutions for ecologically sustainable. Applying engineered biochar in various fields, especially with nanoscale biochar-aided wastewater treatment approaches, can eliminate hazardous metal(loid) contaminants, highlighting an environmentally friendly and low-cost method. Surface modification of engineered biochar with nanomaterials is a potential strategy that positively influences its sorption capacity to remove contaminants. The research findings highlighted the biochars' ability to adsorb HM ions based on increased specific surface area (SSA), heightened porosity, and forming inner-sphere complexes with oxygen-rich groups. Utilizing biochar modification emerged as a viable approach for addressing lead (Pb), cadmium (Cd), arsenic (As), mercury (Hg), and chromium (Cr) pollution in aqueous environments. Most biochars investigated demonstrated a removal efficiency >90 % (Cd, As, Hg) and can reach an impressive 99 % (Pb and Cr). Furthermore, biochar and advanced engineered applications are also considered alternative solutions based on the circular economy.

Comprehensive assessment of exposure and environmental risk of potentially toxic elements in surface water and sediment across China: A synthesis study.

China faces a serious challenge with water pollution posed by potentially toxic elements (PTEs). Comprehensive and reliable environmental risk assessment is paramount for precise pollution prevention and control. Previous studies generally focused on a single environmental compartment within small regions, and the uncertainty in risk calculation is not fully considered. This study revealed the current exposure status of 11 PTEs in surface water and sediment across China using previously reported concentration data in 301 well-screened articles. Ecological and human health risks were evaluated and the uncertainty related to calculation parameters and exposure dataset were quantified. PTEs of high concern were further identified. Results showed Mn and Zn had the highest concentration levels, while Hg and Cd had the lowest concentrations in both surface water and sediment. Risk assessment of individual PTE showed that high-risk PTEs varied by risk receptors and environmental compartments. Nationwide, the probability of aquatic organisms being affected by Mn, Zn, Cu, and As in surface water exceeded 10 %. In sediment, Cd and Hg exhibited high and considerable risk, respectively. As was identified as the major PTE threatening human health as its carcinogenic risk was 1.45 × 10-4 through direct ingestion. Combined risk assessment showed the PTE mixture in surface water and sediment posed medium and high ecological risk with the risk quotient and potential ecological risk index of 1.76 and 558.36, respectively. Adverse health effects through incidental ingestion and dermal contact during swimming were negligible. This study provides a nationwide risk assessment of PTEs in China's aquatic environment and the robustness is verified, which can serve as a practical basis for policymakers to guide the early warning and precise management of water pollution.

Assessment of Air Pollution in Ulaanbaatar Using the Moss Bag Technique.

Active moss biomonitoring, the so-called moss bag technique, widely applied in many countries, for the first time, was applied to assess the air quality in Ulaanbaatar (Mongolia). Moss bags with Sphagnum girgensohnii Russow were exposed in triplicate in three different periods: December-February, March-May, and December-May at 13 governmental air quality monitoring stations located in the vicinity of thermal power plants and residential areas. The plant tissue content of Al, Ba, Co, Cd, Cr, Cu, Fe, Mn, P, Pb, Sr, S, V, As, and Zn was determined using inductively coupled plasma-optical emission spectrometry, and a direct mercury analyzer was used to determine the Hg content. The samples in residential areas and near thermal power plants that were exposed for 3 months in winter and for 6 months (winter to spring) were characterized by the highest accumulation of the elements. In the moss bags exposed during spring, maximum accumulation of the determined elements was noted in residential areas and near main roads. Regardless of the exposure time and duration, the highest accumulation of Al, Fe, and V was determined at Dambadarjaa air quality station located near a highway and of Hg near the Amgalan power plant. Significant differences in element accumulation between seasons were observed, thus, the accumulation of Al, Ba, As, Co, Cr, Fe, Pb, V, and Zn was higher in spring, while P and S had higher content in the moss samples exposed during winter. The accumulation of elements over the 6-month exposure period was 1.1-6.7 times higher than that of the 3-month periods. Thus, the 6-month exposure can be considered a reliable deployment period as it ensures an adequate signal in terms of enrichment of pollutants. Factor analysis was applied to highlight the association of elements and to link them with possible sources of emission. Three factors were determined, the first one included Al, As, Ba, Co, Cr, Fe, Mn, Pb, Sr, and V and was identified as a geogenic-anthropogenic, the second (Cu, P, and S) and third (Cd and Zn) factors suggested anthropogenic origin. The Relative accumulation factor and enrichment factor were calculated to evaluate the level of air pollution and possible element sources. Considerable contributors to air pollution were Zn, Fe, As, V, Cr, and Al, which may originate from airborne soil particles of crustal matter or transport, as well as coal combustion for heating and cooking.

Integrated assessment of the pollution and risk of heavy metals in soils near chemical industry parks along the middle Yangtze River.

Industrialization in riparian areas of critical rivers has caused significant environmental and health impacts. Taking eight industrial parks along the middle Yangtze River as examples, this study proposes a multiple-criteria approach to investigate soil heavy metal pollution and associated ecological and health risks posed by industrial activities. Aiming at seven heavy metals, the results show that nickel (Ni), cadmium (Cd), and copper (Cu) exhibited the most significant accumulation above background levels. The comprehensive findings from Pearson correlation analysis, cluster analysis, principal component analysis, and industrial investigation uncover the primary sources of Cd, arsenic (As), mercury (Hg), and lead (Pb) to be chemical processing, while Ni and chromium (Cr) are predominantly derived from mechanical and electrical equipment manufacturing. In contrast, Cu exhibits a broad range of origins across various industrial processes. Soil heavy metals can cause serious ecological and carcinogenic health risks, of which Cd and Hg contribute to >70 % of the total ecological risk, and As contributes over 80 % of the total health risk. This study highlights the importance of employing multiple mathematical and statistical models in determining and evaluating environmental hazards, and may aid in planning the environmental remediation engineering and optimizing the industry standards.

Accumulation and risk assessment of mercury in soil as influenced by mercury mining/smelting in Tongren, Southwest China.

To investigate the influence of mercury (Hg) mining/smelting on the surrounding soil environment, ninety soil samples were collected around Hg mining/smelting areas in Tongren city, Guizhou Province, Southwest China. The total mercury (THg), methylmercury (MeHg), bioavailability and fractions of Hg in the soil and their potential risk were evaluated. The results showed that Hg mining/smelting significantly increased the soil pH and decreased the soil organic matter content (p < 0.05). The THg content in the surrounding soil was much higher than that at the control site, with almost all the samples exceeding the national standard in China (3.4 mg/kg, GB15618-2018). Similarly, the concentrations of MeHg (0.09-2.74 µg/kg) and bioavailable Hg (0.64-62.94 µg/kg) in these soil samples were also significantly higher than those in the control site. However, the MeHg/THg ratio was significantly lower in mining/smelting influenced soils (0.01-0.68%) than in control soils (0.60-3.72%). Fraction analysis revealed that residual (RES-Hg) and organic matter-bounded (OM-Hg) Hg accounted for more than 50% of the THg. Ecological risk assessment revealed that the potential ecological risk for most of the Hg mining/smelting-influenced soils (30.16 ≤ Er ≤ 2280.02) were higher than those at the control site (15.12 ≤ Er ≤ 27.1). In addition, these Hg mining/smelting-influenced soils posed acceptable noncarcinogenic risks to adults (except for two soil samples), with hazard indices (HIs) ranging from 0.04 to 1.11 and a mean HI of 0.44. However, children suffer serious noncarcinogenic risks, with HIs ranging from 0.34 to 7.43 and a mean HI of 3.10.

Identification of sources and analysis of spatial distribution of soil heavy metals in northern China coal mining areas.

The mining and utilization of coal resources has not only promoted rapid economic development but also poses a potential threat to the ecological environment. The purpose of this study is to clarify the effects both of mining and land use types on the spatial distribution and particular sources of heavy metals in soil, using inverse distance weighted (IDW) and the Positive Matrix Factorization (PMF) model. A total of 99 topsoil and profile soil samples across different land use types and mining conditions were collected. The contamination of soil with Cd, Pb, and Hg in the research area was most severe, with the coefficient of variation (CV) of Hg being the largest, while also being heavily influenced by human activities. Severely polluted regions were mainly distributed in the center of the coal mining area, as well as near the highway. The contents of heavy metals for various land use patterns were ranked as follows: forestland > farmland > bare land > grassland > building land. Hg, Cd, Pb, Cr, and Zn had showed migration in the 0-60 cm depth range, and the enrichment factors (EFs) of Cd, Pb, Hg, and As in the soil profile were the most significant. The PMF demonstrated that the contributions of industrial activities and atmospheric deposition, transportation and mining activities, agricultural activities, and natural sources accounted for 31.25%, 28.13%, 22.24%, and 18.38%, respectively. The migration and deposition of atmospheric particulate matter from coal mining, transportation, and coal combustion under winds triggered heavy metal contamination in semi-arid areas of northern China. This phenomenon has important implications for the prevention and reduction of heavy metal pollution through various effective measures in coal-mining cities in northern China.

Selenium and mercury concentration, Se/Hg molar ratio and risk-benefit assessment of marine fish consumption: Human health risks and protective role of Se against Hg toxicity.

This study aimed to explore the concentrations of Se and Hg in marine fish along the Gulf of Mannar (southeast coast of India) and to assess related risks and risk-based consumption limits for children, pregnant women, and adults. Se concentrations in pelagic and benthic fish ranged from 0.278 to 0.470 mg/kg and 0.203 to 0.294 mg/kg, respectively, whereas Hg concentrations ranged from 0.028 to 0.106 mg/kg and 0.026 to 0.097 mg/kg, respectively. Se and Hg contents in demersal fish (Nemipterus japonicus) were 0.282 and 0.039 mg/kg, respectively. The lowest and highest Hg concentrations in pelagic fish were found in Scomberomorus commersoni and Euthynnus affinis whereas the lowest and highest Se concentrations in benthic fish were found in Scarus ghobban and Siganus javus. Se concentrations in marine fishes were found in the following order: pelagic > demersal > benthic whereas Hg concentrations were found in the following order: pelagic > benthic > demersal. The presence of Se in fish was positively correlated with trophic level (TL) and size whereas that of Hg was weakly correlated with TL and habitat and negatively correlated with size. Se risk-benefit analysis, the AI/RDI (actual intake/recommended daily intake) ratio was > 100 % and the AI/UL (upper limit) ratio was < 100 %, indicating that all fish have sufficient levels of Se to meet daily requirements without exceeding the UL. Hg level was below the maximum residual limit (MRL) of 0.5 mg/kg for most fish but it was 1 mg/kg in E. affinis and Lethrinus lentjan. The target hazard quotient (THQ < 1) and hazard index (HI < 1) imply that the consumption of fish poses no noncarcinogenic health risks. However, all examined fish had a mean Se/Hg molar ratio > 1, indicating that human intake of fishwas rather safe relative to Hg content. Health benefit indexes (Se-HBV and HBVse) with high positive values in all fish supported the protective effect of Se against Hg toxicity, suggesting the overall safety of fish consumption. The high Se/Hg ratio in fish could be attributed to the replacement of Se bound to Hg, thereby suppressing Hg toxicity and maintaining normal selenoprotein synthesis. This insight is useful for a better understanding of food safety analysis.

Homemade weaning foods as a source of lead and mercury exposure in Korean infants - A dietary risk assessment study.

Lead (Pb) and mercury (Hg) are neurodevelopmental toxicants that pose risks to cognitive and behavioral health. Given early childhood's vulnerability to these metals, understanding their sources and pathways of exposure during infancy is crucial for public health. During the weaning process, infants may be exposed to metals through the baby food they consume. We aimed to assess metal exposure through homemade weaning foods by analyzing 288 samples consumed by 157 Korean infants aged 6-, 9-, 12-, 15-, and 24-27 months. Pb was detected in 65 % of samples, with levels reaching up to 169 ng/g. Notably, 58 % exceeded the Maximum Level (ML) of 10 ng/g, with a median concentration of 14.7 ng/g fresh weight. Total Hg was found in 88 % of samples, with a median concentration of 4.56 ng/g fresh weight. Estimated median daily intakes of Pb and Hg were 0.29 and 0.09 µg/kg/d, respectively. Considering a benchmark dose for Pb (0.5 µg/kg/d by EFSA), 94 % (the margin of exposure <10) of all age groups was estimated to have a potential health concern associated with homemade baby food consumption. For Hg, only 6 % exceeded a hazard quotients of 1 compared to a provisional tolerable weekly intake for Hg (4 µg/kg/week by WHO). This study marks the first direct assessment of daily Pb and Hg intake through homemade baby food among Korean infants. Our findings underscore the urgent need for heightened awareness regarding metal exposure through homemade baby food.

Potentially toxic elements contamination in the water resources: an integrated risk assessment approach in the upper Citarum watershed area.

The Citarum watershed is West Java Province's most important water resource; hence, harmful compounds should be monitored regularly. This study assessed pollution levels along with ecological and health risks from Cd, Pb, Mn, Fe, Cu, Cr, and Hg contamination in river water, sediment, groundwater, and soil in Citarum's upper watershed. In river water, the average amounts of Cd, Pb, Mn, Fe, Cu, Cr, and Hg were 0.002, 0.05, 0.092, 0.649, 0.022, 0.001, and 0.421 mg/L. In sediment, they were 7.4, 1175.1, 32,289.9, 37.3, 3.9, and 0.015 mg/kg. The mean concentrations of Cd, Pb, Mn, Fe, Cu, Cr, and Hg in groundwater were 0.004, 0.046, 0.567, 0.366, 0.019, 0.001, and 0.177 mg/L, and in soil, BDL, 10.2, 744.6, 50,094.1, 45.6, 5.9, and 0.015 mg/kg. The river water and groundwater were highly polluted by PTEs, with HPI values of 14,733 and 933, respectively. While PTEs pollution levels and risk in sediment and soil were low based on I-geo, CF, PLI, and M-ERM-Q values, PTEs contamination in river water may cause adverse impacts on aquatic living organisms (HQ > 1). The population doing recreational activities in river ecosystems was still safe from non-carcinogenic and carcinogenic impacts due to PTEs exposure from river water and sediment (THI < 1 and TCR value < 1E-04), while the population in the upper Citarum River was not safe from the carcinogenic risk due to PTE exposure from groundwater and soil (TCR > 1E-04). The sensitivity analysis showed that Cd concentration in groundwater is the most influential factor in cancer risk, with a total contribution of 99.9%. Therefore, a reduction in Cd concentration in groundwater is important to reduce cancer risk in the population.