Microcomputed Tomography Mineral Density Profile as Reference Standard for Early Carious Lesion Activity Assessment.

Early caries diagnosis is crucial to treatment decisions in dentistry and requires identification of lesion activity: whether a carious lesion is active (progressively demineralizing) or arrested (progressively remineralizing). This study aimed to identify microtomographic (micro-CT) differences between active and arrested smooth surface enamel lesions, to quantify those micro-CT differences by creating thresholds for ex vivo caries activity assessment to serve as a future reference standard, and to validate those thresholds against the remaining sample. Extracted human permanent teeth (n = 59) were selected for sound surfaces and non-cavitated smooth surface carious lesions. Each surface was then examined for caries activity by calibrated individuals via visual-tactile examination using the International Caries Classification and Management System (ICCMS) activity criteria. Each tooth was scanned via micro-CT and the mineral density was plotted against lesion depth. The area under the curve (AUC) was calculated and represented the loss of density for the outermost 96 µm of enamel. AUC thresholds obtained from micro-CT were established to classify sound, remineralized, and demineralized surfaces against the gold standard examiner's lesion assessment of sound, inactive, and active lesions, respectively. The established AUC thresholds demonstrated moderate agreement with the assessment in identifying demineralized lesions (k = 0.45), with high sensitivity (0.73) and specificity (0.77). This study demonstrated quantifiable differences among demineralized lesions, remineralized lesions, and sound surfaces, which contributes to the establishment of micro-CT as a reference standard for caries activity that may be used to improve clinical and laboratorial dental caries evaluations.

Shaping ability of WaveOne Gold and OneReci by using two apical sizes: a micro-computed tomographic assessment.

Backround: OneReci (MicroMega, Besançon, France) is a recently introduced single-file reciprocating system with scarce information revealed on its shaping ability. This study aimed to compare the shaping abilities of OneReci and a well-documented single-file reciprocating system WaveOne Gold (WOG; Dentsply Maillefer, Ballaigues, Switzerland) and evaluate the effect of increased apical enlargement on the preparation quality, using micro-computed tomography (micro-CT). Methods: After an initial micro-CT scanning, twenty mesial root canals of mandibular molars were anatomically matched. The canals were assigned to two experimental groups (n = 10), using OneReci or WOG in different canals of the same root. The glide paths were created, and root canals were prepared twice, using size 25 and 35 instruments of the systems, respectively. The specimens were scanned with micro-CT after each preparation. The increase in canal volume, amount of dentin removal, unprepared root canal surface, canal transportation, centering ratio and preparation times were assessed. The data were analysed with independent sample t-tests, variance analyses, Friedman and Mann-Whitney U tests. The significance level was set at 5%. Results: Each preparation increased the canal volume and dentin removal while decreasing the unprepared root surface. The difference between the systems became significant after preparation with size 35 instruments (p < 0.05). Regarding canal transportation and centering ratio, the difference was insignificant (p > 0.05). The first preparation step (glide path + size 25 instrument) was significantly faster in the OneReci group (p < 0.05). Conclusions: Preparation with size 25 instruments of the systems appeared to be safe with similar shaping performances. Larger apical preparation promoted significantly higher dentin removal, volume increase, and prepared surface area in WOG.

High-energy synchrotron-radiation-based X-ray micro-tomography enables non-destructive and micro-scale palaeohistological assessment of macro-scale fossil dinosaur bones.

Palaeohistological analysis has numerous applications in understanding the palaeobiology of extinct dinosaurs. Recent developments of synchrotron-radiation-based X-ray micro-tomography (SXMT) have allowed the non-destructive assessment of palaeohistological features in fossil skeletons. Yet, the application of the technique has been limited to specimens on the millimetre to micrometre scale because its high-resolution capacity has been obtained at the expense of a small field of view and low X-ray energy. Here, SXMT analyses of dinosaur bones with widths measuring ∼3 cm under a voxel size of ∼4 µm at beamline BL28B2 at SPring-8 (Hyogo, Japan) are reported, and the advantages of virtual-palaeohistological analyses with large field of view and high X-ray energy are explored. The analyses provide virtual thin-sections visualizing palaeohistological features comparable with those obtained by traditional palaeohistology. Namely, vascular canals, secondary osteons and lines of arrested growth are visible in the tomography images, while osteocyte lacunae are unobservable due to their micrometre-scale diameter. Virtual palaeohistology at BL28B2 is advantageous in being non-destructive, allowing multiple sampling within and across skeletal elements to exhaustively test the skeletal maturity of an animal. Continued SXMT experiments at SPring-8 should facilitate the development of SXMT experimental procedures and aid in understanding the paleobiology of extinct dinosaurs.

Micro-CT-derived ventilation biomarkers for the longitudinal assessment of pathology and response to therapy in a mouse model of lung fibrosis.

Experimental in-vivo animal models are key tools to investigate the pathogenesis of lung disease and to discover new therapeutics. Histopathological and biochemical investigations of explanted lung tissue are currently considered the gold standard, but they provide space-localized information and are not amenable to longitudinal studies in individual animals. Here, we present an imaging procedure that uses micro-CT to extract morpho-functional indicators of lung pathology in a murine model of lung fibrosis. We quantified the decrease of lung ventilation and measured the antifibrotic effect of Nintedanib. A robust structure-function relationship was revealed by cumulative data correlating micro-CT with histomorphometric endpoints. The results highlight the potential of in-vivo micro-CT biomarkers as novel tools to monitor the progression of inflammatory and fibrotic lung disease and to shed light on the mechanism of action of candidate drugs. Our platform is also expected to streamline translation from preclinical studies to human patients.

Thermal and volumetric assessment of endodontic filling techniques using infrared thermography and micro-CT.

PURPOSE: To assess root temperature during filling techniques and quantify the volume of endodontic filling materials using infrared thermography (IT) and micro-computed tomography (micro-CT). METHODS: Ninety premolars were divided into three groups: lateral condensation (LC), single cone (SC) and thermomechanical compaction (TMC). For thermal analysis, 45 teeth were assessed using a FLIR T650sc IT camera during filling techniques and 45 teeth were scanned using a Nikon micro-CT to assess gutta-percha, cement, and void volumes. Descriptive and inferential statistical analyses were performed (non-parametric Mann-Whitney test, Kruskal-Wallis test, and Friedman test with Tukey's bidirectional analysis of variance). RESULTS: TMC showed the highest temperature increase at 15 s after the procedure and a significant temperature decrease at 45 s after its completion. TMC showed the largest volume of gutta-percha and LC the highest void volume. CONCLUSION: The temperature increase generated by gutta-percha endodontic filling techniques is within acceptable limits. A greater volume of endodontic cement was observed for the SL and LC filling techniques.

Morphological assessment of the isthmus in mesial root canals of first mandibular molars.

Root canal morphology and its anatomical variations pose a great challenge to endodontists. Aim: The aim of this in silico study was to perform a qualitative and quantitative analysis of the threedimensional morphological characteristics of the isthmus in the mesial root canals of mandibular molars using microcomputed tomography (micro-CT). Material and Method: Six hundred first mandibular molars were selected, including 317 with two mesial canals with isthmuses between the canals, and fully formed root. Isthmus morphology was determined in 3D longitudinal sections using Fan et al. (2010) classification. Root length, and the volume and area of apical and coronal level were measured. Additionally, the structural model index (SMI) of the canals were also assessed. Results: The prevalence of isthmuses in the mesial root canals was 32% type II, 29% type III, 22% type IV, and 17% type I. The root length was found to be 9.1±0.5 mm, the volume and area, of all root canal system, were 41.8±40.1 mm3 and 63.6±24.2 mm2 respectively. The isthmi volume and area alone were 11.06±9.03 mm3 and 30.02±11.02 mm2. The study confirmed that isthmuses are present in mesial canals of mandibular first molars, being more frequent in the apical third. Conclusion: The high prevalence of isthmuses with complex morphological features underscores the importance of using intracanal medications to disinfect areas unprepared by instruments.

A morfologia do canal radicular e suas variações anatômicas representam um grande desafio para os endodontistas. O objetivo deste estudo ex vivo foi realizar uma análise qualitativa e quantitativa das características morfológicas tridimensionais do istmo nos canais mesiais de molares inferiores por meio de microtomografia computadorizada (micro-CT). Material e Método: Foram selecionados 600 primeiros molares inferiores, incluindo 317 com dois canais mesiais com istmos e raiz totalmente formada. A morfologia do istmo foi determinada em cortes longitudinais 3D usando a classificação Fan et al. (2010). Foram mensurados o comprimento da raiz, o volume e a área apical e coronal e da cavidade pulpar. Adicionalmente, também foram avaliados o structure model index (SMI) dos canais. Resultados: A prevalência de istmos nos canais mesiais foi de 32% tipo II, 29% tipo III, 22% tipo IV e 17% tipo I. O comprimento da raiz foi de 9,1±0,5 mm, o volume e a área de todo o sistema de canais radiculares foram de 41.8±40.1 mm3 e 63.6±24.2 mm2, respectivamente. O volume e área do istmo isoladamente foram 11.06±9,03 mm3 e 30.02±11.02 mm2. O estudo confirmou que os istmos estão presentes em canais mesiais dos primeiros molares inferiores, sendo mais frequentes no terço apical. Conclusão: A alta prevalência de istmos com características morfológicas complexas ressalta a importância do uso de medicação intracanal para desinfecção de áreas não tocadas por instrumentos.

Histological assessment of cortical bone changes in diabetic rats.

BACKGROUND: Diabetes mellitus weakens bone strength due to deterioration of bone quality; however, the histological mechanisms are still unknown. We hypothesized that histological assessment of cortical bone would enable us to determine the cause of the bone strength reduction associated with diabetes mellitus. Our aim was to evaluate the histomorphometric changes of cortical bone associated with deterioration of intrinsic bone properties and bone quality in diabetes mellitus. METHODS: We compared the outcomes of mechanical tests, bone mineral density measured using micro-computed tomography, and histological assessments, by applying Villanueva's bone stain, to the tibial bones of 40-week-old diabetic and control male rats. RESULTS: With respect to mechanical testing, the maximum load and energy absorption were significantly lower in the diabetic than in the control group, although fracture displacement and stiffness were not significantly different between the two groups. Bone mineral density was significantly higher in the diabetic group than in the control group. Bone histomorphometry revealed that the diabetic rats had fewer osteocytes, greater cortical porosity, and increased mineralization in cortical bone compared with the control group. CONCLUSIONS: Increased mineralization of the cortical bone with greater cortical porosity leads to a weakening of bone strength in diabetes mellitus.

Assessment of Bone Microstructure by Micro CT in C57BL/6J Mice for Sex-Specific Differentiation.

It remains uncertain which skeletal sites and parameters should be analyzed in rodent studies evaluating bone health and disease. In this cross-sectional mouse study using micro-computed tomography (µCT), we explored: (1) which microstructural parameters can be used to discriminate female from male bones and (2) whether it is meaningful to evaluate more than one bone site. Microstructural parameters of the trabecular and/or cortical compartments of the femur, tibia, thoracic and lumbar vertebral bodies, and skull were evaluated by µCT in 10 female and 10 male six-month-old C57BL/6J mice. The trabecular number (TbN) was significantly higher, while the trabecular separation (TbSp) was significantly lower in male compared to female mice at all skeletal sites assessed. Overall, bone volume/tissue volume (BV/TV) was also significantly higher in male vs. female mice (except for the thoracic spine, which did not differ by sex). Most parameters of the cortical bone microstructure did not differ between male and female mice. BV/TV, TbN, and TbSp at the femur, and TbN and TbSp at the tibia and lumbar spine could fully (100%) discriminate female from male bones. Cortical thickness (CtTh) at the femur was the best parameter to detect sex differences in the cortical compartment (AUC = 0.914). In 6-month-old C57BL/6J mice, BV/TV, TbN, and TbSp can be used to distinguish male from female bones. Whenever it is not possible to assess multiple bone sites, we propose to evaluate the bone microstructure of the femur for detecting potential sex differences.

Reproducibility of Densitometric and Biomechanical Assessment of the Mouse Tibia From In Vivo Micro-CT Images.

Interventions for bone diseases (e.g. osteoporosis) require testing in animal models before clinical translation and the mouse tibia is among the most common tested anatomical sites. In vivo micro-Computed Tomography (microCT) based measurements of the geometrical and densitometric properties are non-invasive and therefore constitute an important tool in preclinical studies. Moreover, validated micro-Finite Element (microFE) models can be used for predicting the bone mechanical properties non-invasively. However, considering that the image processing pipeline requires operator-dependant steps, the reproducibility of these measurements has to be assessed. The aim of this study was to evaluate the intra- and inter-operator reproducibility of several bone parameters measured from microCT images. Ten in vivo microCT images of the right tibia of five mice (at 18 and 22 weeks of age) were processed. One experienced operator (intra-operator analysis) and three different operators (inter-operator) aligned each image to a reference through a rigid registration and selected a volume of interest below the growth plate. From each image the following parameters were measured: total bone mineral content (BMC) and density (BMD), BMC in 40 subregions (ten longitudinal sections, four quadrants), microFE-based stiffness and failure load. Intra-operator reproducibility was acceptable for all parameters (precision error, PE < 3.71%), with lowest reproducibility for stiffness (3.06% at week 18, 3.71% at week 22). The inter-operator reproducibility was slightly lower (PE < 4.25%), although still acceptable for assessing the properties of most interventions. The lowest reproducibility was found for BMC in the lateral sector at the midshaft (PE = 4.25%). Densitometric parameters were more reproducible than most standard morphometric parameters calculated in the proximal trabecular bone. In conclusion, microCT and microFE models provide reproducible measurements for non-invasive assessment of the mouse tibia properties.

Adaptive local thresholding can enhance the accuracy of HR-pQCT-based trabecular bone morphology assessment.

High-resolution peripheral quantitative computed tomography (HR-pQCT) devices can scan extremities at bone microstructural level in vivo and are used mainly in research of bone diseases. Two HR-pQCT scanners are commercially available to date: XtremeCT (first generation) and XtremeCT-II (second generation) from Scanco Medical AG (Switzerland). Recently, we have proposed an adaptive local thresholding (AT) technique and showed that it can improve quantification accuracy of bone microstructural parameters, with visually less sharp cone-beam CT (CBCT) images providing a similar accuracy than XtremeCT. The aim of this study was to evaluate whether the AT segmentation technique could enhance the accuracy of HR-pQCT in quantifying bone microstructural images and to assess whether the agreement between XtremeCT and XtremeCT-II could be improved. Nineteen radii were scanned with three scanners from Scanco Medical AG: (1) XtremeCT at 82 µm, (2) XtremeCT-II at 60.7 µm and (3) the small animal microCT scanner VivaCT40 at 19 µm voxel size. The scans were segmented applying two different methods, once following the manufacturer standard technique (ST), and once by means of AT. Three-dimensional (3D) morphological analysis was performed on the trabecular volume of the segmented images using the manufacturer's standard software to calculate bone volume fraction (BV/TV), trabecular thickness (Tb.Th), separation (Tb.Sp) and number (Tb.N). The average accuracy of XtremeCT improved from R2 = 0.76 (ST) to 0.85 (AT) and reached the same level of accuracy as XtremeCT-II with ST (R2 = 0.86). The largest improvements were obtained for BV/TV and Tb.Th. For XtremeCT-II, mean accuracy improved slightly from R2 = 0.86 (ST) to 0.89 (AT). For both segmentations and both scanners, the standard section was quantified slightly more accurate than the subchondral section. The agreement between the scanners was enhanced from R2 = 0.89 (ST) to 0.98 (AT). In conclusion, AT can enhance the accuracy of XtremeCT to quantify distal radius bone microstructural parameters close to XtremeCT-II level and increases the agreement between the two HR-pQCT scanners. High-resolution peripheral quantitative computed tomography, segmentation, bone microstructural parameters.

Standardized assessment of bone micromorphometry around teeth following orthodontic tooth movement : A µCT split-mouth study in mice.

PURPOSE: Volumetric quantitative analyses of bone micromorphometry changes following orthodontic tooth movements are hardly standardizable. The present study aimed at validating and applying a novel microcomputed tomography (CT)-based approach that enables the segmentation of teeth and definition of a standardized volume of interest (VOI) around the roots to assess local bone micromorphometry. METHODS: The jaws of 3 untreated and 14 orthodontically treated mice (protraction of the upper right molar for 11 days with 0.5 N; untreated left upper molar) were scanned with a micro-CT. The first molars and the alveolar bone were segmented, and a standardized VOI was defined around the teeth. The bone volume per total volume (BV/TV) was assessed within the VOI, and BV/TV values were compared between contralateral sites in both untreated (method validation) and treated animals (method application). RESULTS: The intraclass correlation coefficient of 0.99 revealed high reliability of the method. In the untreated animals, Bland-Altman analysis confirmed comparable BV/TV fractions (mean difference: -1.93, critical difference: 1.91, Wilcoxon: p = 0.03). In the orthodontically treated animals, BV/TV values were significantly lower at the test compared to the control site (test: 33.23% ± 5.74%, control: 41.33% ± 4.91%, Wilcoxon: p < 0.001). CONCLUSION: Within the limits of the study, the novel approach demonstrated the applicability to evaluate bone micromorphometry around teeth subjected to orthodontic treatment.

Developing diagnostic assessment of breast lumpectomy tissues using radiomic and optical signatures.

High positive margin rates in oncologic breast-conserving surgery are a pressing clinical problem. Volumetric X-ray scanning is emerging as a powerful ex vivo specimen imaging technique for analyzing resection margins, but X-rays lack contrast between non-malignant and malignant fibrous tissues. In this study, combined micro-CT and wide-field optical image radiomics were developed to classify malignancy of breast cancer tissues, demonstrating that X-ray/optical radiomics improve malignancy classification. Ninety-two standardized features were extracted from co-registered micro-CT and optical spatial frequency domain imaging samples extracted from 54 breast tumors exhibiting seven tissue subtypes confirmed by microscopic histological analysis. Multimodal feature sets improved classification performance versus micro-CT alone when adipose samples were included (AUC = 0.88 vs. 0.90; p-value = 3.65e-11) and excluded, focusing the classification task on exclusively non-malignant fibrous versus malignant tissues (AUC = 0.78 vs. 0.85; p-value = 9.33e-14). Extending the radiomics approach to high-dimensional optical data-termed "optomics" in this study-offers a promising optical image analysis technique for cancer detection. Radiomic feature data and classification source code are publicly available.

Quantitative assessment of the vertebral pneumaticity in an anhanguerid pterosaur using micro-CT scanning.

Research on the postcranial skeletal pneumaticity in pterosaurs is common in the literature, but most studies present only qualitative assessments. When quantitative, they are done on isolated bones. Here, we estimate the Air Space Proportion (ASP) obtained from micro-CT scans of the sequence from the sixth cervical to the fourth dorsal vertebra of an anhanguerine pterosaur to understand how pneumaticity is distributed in these bones. Pneumatisation of the vertebrae varied between 68 and 72% of their total volume. The neural arch showed higher ASP in all vertebrae. Anhanguerine vertebral ASP was generally higher than in sauropod vertebrae but lower than in most extant birds. The ASP observed here is lower than that calculated for the appendicular skeleton of other anhanguerian pterosaurs, indicating the potential existence of variation between axial and appendicular pneumatisation. The results point to a pattern in the distribution of the air space, which shows an increase in the area occupied by the trabecular bone in the craniocaudal direction of the vertebral series and, in each vertebra, an increase of the thickness of the trabeculae in the zygapophyses. This indicates that the distribution of pneumatic diverticula in anhanguerine vertebrae may not be associated with stochastic patterns.

Simple low dose radiography allows precise lung volume assessment in mice.

X-ray based lung function (XLF) as a planar method uses dramatically less X-ray dose than computed tomography (CT) but so far lacked the ability to relate its parameters to pulmonary air volume. The purpose of this study was to calibrate the functional constituents of XLF that are biomedically decipherable and directly comparable to that of micro-CT and whole-body plethysmography (WBP). Here, we developed a unique set-up for simultaneous assessment of lung function and volume using XLF, micro-CT and WBP on healthy mice. Our results reveal a strong correlation of lung volumes obtained from radiographic XLF and micro-CT and demonstrate that XLF is superior to WBP in sensitivity and precision to assess lung volumes. Importantly, XLF measurement uses only a fraction of the radiation dose and acquisition time required for CT. Therefore, the redefined XLF approach is a promising tool for preclinical longitudinal studies with a substantial potential of clinical translation.

Micro-computed tomography (micro-CT) for the assessment of myocardial disarray, fibrosis and ventricular mass in a feline model of hypertrophic cardiomyopathy.

Micro-computed tomography (micro-CT) is a high-resolution imaging modality that provides accurate tissue characterization. Hypertrophic cardiomyopathy (HCM) occurs as a spontaneous disease in cats, and is characterized by myocardial hypertrophy, disarray and fibrosis, as in humans. While hypertrophy/mass (LVM) can be objectively measured, fibrosis and myocyte disarray are difficult to assess. We evaluated the accuracy of micro-CT for detection and quantification of myocardial disarray and fibrosis by direct comparison with histopathology. 29 cat hearts (12 normal and 17 HCM hearts) underwent micro-CT and pathologic examination. Myocyte orientation was assessed using structure tensor analysis by determination of helical angle (HA), fractional anisotropy (FA) and myocardial disarray index (MDI). Fibrosis was segmented and quantified based on comparison of gray-scale values in normal and fibrotic myocardium. LVM was obtained by determining myocardial volume. Myocardial segments with low FA, low MDI and disruption of normal HA transmural profile on micro-CT were associated with myocardial disarray on histopathology. FA was consistently lower in HCM than normal hearts. Assessment of fibrosis on micro-CT closely matched the histopathologic evaluation. LVM determined by micro-CT was higher in HCM than normal hearts. Micro-CT can be used to detect and quantify myocardial disarray and fibrosis and determine myocardial mass in HCM.

Assessment of irradiated socket healing in the rabbit's mandible: Experimental study.

As bone healing is altered after external radiation therapy, its evaluation is mandatory and lacks in clinical practice. The aim of the pilot study was to validate micro computed tomography (microCT) as a simple and reliable technique for assessing irradiated bone healing in the rabbit's mandible and compare with histologic findings. Nineteen rabbits (female New Zealand white) were used. The radiation protocol consisted of 5 sessions delivering 8.5 Gy each. MicroCT was performed at D0, D7, D14, D28 and D42 for the control group and D0, D28 and D42 for the irradiated group. A modified Perry's score was determined on histologic samples, and comparison between microCT and histological findings was performed. The main differences between irradiated and non-irradiated rabbits were observed at Day 28 and 42. There was a strong correlation between imaging and histologic findings. Radiation decreases bone quality and bone mineral density. As the correlation was strong between microCT and histologic findings, micro imaging could be considered as a simple and reliable technique to assess bone healing after radiation therapy and allows an easy comparison between samples, without invasive procedures. Great attention should be kept on the parameters and on the region of interest. The development of in-vivo microCT enlarges the perspectives of microCT use in experimental studies, avoiding invasive procedures, and preserving animal lives and well-being, and furthermore lead to clinical applications.

Cone-beam and micro-computed tomography for the assessment of root canal morphology: a systematic review.

This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (µCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with µCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and µCT in the assessment of root canal morphology using Vertucci's classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the µCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as µCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.

Micro-computed tomographic assessment of the variability and morphological features of root canal system and their ramifications.

OBJECTIVES: This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (µCT). METHODOLOGY: 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by µCT with a resolution of 26.70 µm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). RESULTS: According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). CONCLUSIONS: µCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This µCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

Synchrotron MicroCT Reveals the Potential of the Dual Contrast Technique for Quantitative Assessment of Human Articular Cartilage Composition.

Dual contrast micro computed tomography (CT) shows potential for detecting articular cartilage degeneration. However, the performance of conventional CT systems is limited by beam hardening, low image resolution (full-body CT), and long acquisition times (conventional microCT). Therefore, to reveal the full potential of the dual contrast technique for imaging cartilage composition we employ the technique using synchrotron microCT. We hypothesize that the above-mentioned limitations are overcome with synchrotron microCT utilizing monochromatic X-ray beam and fast image acquisition. Human osteochondral samples (n = 41, four cadavers) were immersed in a contrast agent solution containing two agents (cationic CA4+ and non-ionic gadoteridol) and imaged with synchrotron microCT at an early diffusion time point (2 h) and at diffusion equilibrium (72 h) using two monochromatic X-ray energies (32 and 34 keV). The dual contrast technique enabled simultaneous determination of CA4+ (i.e., proteoglycan content) and gadoteridol (i.e., water content) partitions within cartilage. Cartilage proteoglycan content and biomechanical properties correlated significantly (0.327 < r < 0.736, p < 0.05) with CA4+ partition in superficial and middle zones at both diffusion time points. Normalization of the CA4+ partition with gadoteridol partition within the cartilage significantly (p < 0.05) improved the detection sensitivity for human osteoarthritic cartilage proteoglycan content, biomechanical properties, and overall condition (Mankin, Osteoarthritis Research Society International, and International Cartilage Repair Society grading systems). The dual energy technique combined with the dual contrast agent enables assessment of human articular cartilage proteoglycan content and biomechanical properties based on CA4+ partition determined using synchrotron microCT. Additionally, the dual contrast technique is not limited by the beam hardening artifact of conventional CT systems. © 2019 The Authors. Journal of Orthopaedic Research® published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 38:563-573, 2020.

Cone-beam and micro-computed tomography for the assessment of root canal morphology: a systematic review

Abstract This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (μCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with μCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and μCT in the assessment of root canal morphology using Vertucci's classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the μCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as μCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.