Assessment of thermal damage for plasmonic photothermal therapy of subsurface tumors.

Plasmonic photothermal therapy (PPTT) involves the use of nanoparticles and near-infrared radiation to attain a temperature above 50 °C within the tumor for its thermal damage. PPTT is largely explored for superficial tumors, and its potential to treat deeper subsurface tumors is dealt feebly, requiring the assessment of thermal damage for such tumors. In this paper, the extent of thermal damage is numerically analyzed for PPTT of invasive ductal carcinoma (IDC) situated at 3-9 mm depths. The developed numerical model is validated with suitable tissue-tumor mimicking phantoms. Tumor (IDC) embedded with gold nanorods (GNRs) is subjected to broadband near-infrared radiation. The effect of various GNRs concentrations and their spatial distributions [viz. uniform distribution, intravenous delivery (peripheral distribution) and intratumoral delivery (localized distribution)] are investigated for thermal damage for subsurface tumors situated at various depths. Results show that lower GNRs concentrations lead to more uniform internal heat generation, eventually resulting in uniform temperature rise. Also, the peripheral distribution of nanoparticles provides a more uniform spatial temperature rise within the tumor. Overall, it is concluded that PPTT has potential to induce thermal damage for subsurface tumors, at depths of upto 9 mm, by proper choice of nanoparticle distribution, dose/concentration and irradiation parameters based on the tumor location. Moreover, intravenous administration of nanoparticles seems a good choice for shallower tumors, while for deeper tumors, uniform distribution is required to attain the necessary thermal damage. In the future, the algorithm may be extended further, involving 3D patient-specific tumors and through mice model-based experiments.

Assessment of Inhibition of Biofilm Formation on Non-Thermal Plasma-Treated TiO2 Nanotubes.

Peri-implantitis is an inflammatory disease similar to periodontitis, caused by biofilms formed on the surface of dental implants. This inflammation can spread to bone tissues and result in bone loss. Therefore, it is essential to inhibit the formation of biofilms on the surface of dental implants. Thus, this study examined the inhibition of biofilm formation by treating TiO2 nanotubes with heat and plasma. Commercially pure titanium specimens were anodized to form TiO2 nanotubes. Heat treatment was performed at 400 and 600 °C, and atmospheric pressure plasma was applied using a plasma generator (PGS-200, Expantech, Suwon, Republic of Korea). Contact angles, surface roughness, surface structure, crystal structure, and chemical compositions were measured to analyze the surface properties of the specimens. The inhibition of biofilm formation was assessed using two methods. The results of this study showed that the heat treatment of TiO2 nanotubes at 400 °C inhibited the adhesion of Streptococcus mutans (S. mutans), associated with initial biofilm formation, and that heat treatment of TiO2 nanotubes at 600 °C inhibited the adhesion of Porphyromonas gingivalis (P. gingivalis), which causes peri-implantitis. Applying plasma to the TiO2 nanotubes heat-treated at 600 °C inhibited the adhesion of S. mutans and P. gingivalis.

Anodic TiO2 Nanotube Layers for Wastewater and Air Treatments: Assessment of Performance Using Sulfamethoxazole Degradation and N2O Reduction.

The preparation of anodic TiO2 nanotube layers has been performed using electrochemical anodization of Ti foil for 4 h at different voltages (from 0 V to 80 V). In addition, a TiO2 thin layer has been also prepared using the sol-gel method. All the photocatalysts have been characterized by XRD, SEM, and DRS to investigate the crystalline phase composition, the surface morphology, and the optical properties, respectively. The performance of the photocatalyst has been assessed in versatile photocatalytic reactions including the reduction of N2O gas and the oxidation of aqueous sulfamethoxazole. Due to their high specific surface area and excellent charge carriers transport, anodic TiO2 nanotube layers have exhibited the highest N2O conversion rate (up to 10% after 22 h) and the highest degradation extent of sulfamethoxazole (about 65% after 4 h) under UVA light. The degradation mechanism of sulfamethoxazole has been investigated by analyzing its transformation products by LC-MS and the predominant role of hydroxyl radicals has been confirmed. Finally, the efficiency of the anodic TiO2 nanotube layer has been tested in real wastewater reaching up to 45% of sulfamethoxazole degradation after 4 h.

Rotational dynamics and transition mechanisms of surface-adsorbed proteins.

Assembly of biomolecules at solid­water interfaces requires molecules to traverse complex orientation-dependent energy landscapes through processes that are poorly understood, largely due to the dearth of in situ single-molecule measurements and statistical analyses of the rotational dynamics that define directional selection. Emerging capabilities in high-speed atomic force microscopy and machine learning have allowed us to directly determine the orientational energy landscape and observe and quantify the rotational dynamics for protein nanorods on the surface of muscovite mica under a variety of conditions. Comparisons with kinetic Monte Carlo simulations show that the transition rates between adjacent orientation-specific energetic minima can largely be understood through traditional models of in-plane Brownian rotation across a biased energy landscape, with resulting transition rates that are exponential in the energy barriers between states. However, transitions between more distant angular states are decoupled from barrier height, with jump-size distributions showing a power law decay that is characteristic of a nonclassical Levy-flight random walk, indicating that large jumps are enabled by alternative modes of motion via activated states. The findings provide insights into the dynamics of biomolecules at solid­liquid interfaces that lead to self-assembly, epitaxial matching, and other orientationally anisotropic outcomes and define a general procedure for exploring such dynamics with implications for hybrid biomolecular­inorganic materials design.

Bioinspired Self-Powered Piezoresistive Sensors for Simultaneous Monitoring of Human Health and Outdoor UV Light Intensity.

The exact fabrication of precise three-dimensional structures for piezoresistive sensors necessitates superior manufacturing methods or tooling, which are accompanied by time-consuming processes and the potential for environmental harm. Herein, we demonstrated a method for in situ synthesis of zinc oxide nanorod (ZnO NR) arrays on graphene-treated cotton and paper substrates and constructed highly sensitive, flexible, wearable, and chemically stable strain sensors. Based on the structure of pine trees and needles in nature, the hybrid sensing layer consisted of graphene-attached cotton or paper fibers and ZnO NRs, and the results showed a high sensitivity of 0.389, 0.095, and 0.029 kPa-1 and an ultra-wide linear range of 0-100 kPa of this sensor under optimal conditions. Our study found that water absorption and swelling of graphene fibers and the associated reduction of pore size and growth of zinc oxide were detrimental to pressure sensor performance. A random line model was developed to examine the effects of different hydrothermal times on sensor performance. Meanwhile, pulse detection, respiration detection, speech recognition, and motion detection, including finger movements, walking, and throat movements, were used to show their practical application in human health activity monitoring. In addition, monolithically grown ZnO NRs on graphene cotton sheets had been integrated into a flexible sensing platform for outdoor UV photo-indication, which is, to our knowledge, the first successful case of an integrated UV photo-detector and motion sensor. Due to its excellent strain detection and UV detection abilities, these strategies are a step forward in developing wearable sensors that are cost-controllable and high-performance.

Assembly and in vitro assessment of a powerful combination: aptamer-modified exosomes combined with gold nanorods for effective photothermal therapy.

Due to good biocompatibility and plasma membrane similarity, the nanosized exosomes are ideal drug carriers. Near-infrared (NIR) photothermal therapy is an emerging method for cancer treatment in which photothermal agents absorb the energy of external NIR light to generate high temperatures in a targeted region to effectively kill cancer cells. Gold nanorods (AuNRs) have been found to provide a prominent photothermal performance, while aptamers can precisely target surface markers on cells with high affinity and specificity. In this study, exosomes were mildly functionalized by integrating them with aptamers and AuNRs to assemble a powerful combination Apt-Exos-AuNRs (AEARs) with good specificity and an effective photothermal killing action on cancer cells. The structure, hydrodynamic diameters, zeta potential, UV-vis absorption spectra and stability of the AEARs were further characterized. In addition, using a cell model, the cancer cell targeting ability of the AEARs and its cellular uptake were observed. Moreover, its photothermal killing effect on various human cancer cells in vitro was validated by a CCK-8 assay as well as apoptosis analysis, the results of which suggest this exosomes-based nanomaterial can serve as a novel and broad-spectrum platform for precision cancer therapy.

In vitro toxicity assessment of hydrogel patches obtained by cation-induced cross-linking of rod-like cellulose nanocrystals.

With the purpose of designing active patches for photodynamic therapy of melanoma, transparent and soft hydrogel membranes (HMs) have been fabricated by cation-induced gelation of rod-like cellulose nanocrystals (CNCs) bearing negatively charged carboxylic groups. Na+ , Ca2+ , Mg2+ have been used as cross-linkers of cellulose nanocrystal (CNC). The biosafety of this material and of its precursors has been evaluated in vitro in cell cultures. Morphological changes, cell organelles integrity, and cell survival with the tetrazolium salt reduction (MTT) assay were utilized as tests of cytotoxicity. Preliminary investigation was performed by addition of the hydrogel components to the cell culture medium and by incubations of the CNC-HM in direct and indirect contact with a confluent monolayer of A375 melanoma cells. Direct contact assays suffered from interference of physical stress. Careful evaluation of cytotoxicity was obtained considering the overall picture provided by microscopy and biochemical tests performed with the CNC-HM in indirect contact with two melanoma cell lines (A375, M14) and human fibroblasts. CNCs have been demonstrated to be a safe precursor material and CNC-HMs have a good biocompatibility provided that the excess of cations, in particular of Ca2+ is removed. These results indicate that CNC and can be safely used to fabricate biomedical devices such as transparent hydrogel patches, although attention must be paid to the fabrication procedure.

Gold-Hybridized Zinc Oxide Nanorods as Real-Time Low-Cost NanoBiosensors for Detection of virulent DNA signature of HPV-16 in Cervical Carcinoma.

Detection of host integrated viral oncogenes are critical for early and point-of-care molecular diagnostics of virus-induced carcinoma. However, available diagnostic approaches are incapable of combining both cost-efficient medical diagnosis and high analytical performances. To circumvent this, we have developed an improved IDE-based nanobiosensor for biorecognition of HPV-16 infected cervical cancer cells through electrochemical impedance spectroscopy. The system is fabricated by coating gold (Au) doped zinc oxide (ZnO) nanorods interfaced with HPV-16 viral DNA bioreceptors on top of the Interdigitated Electrode (IDE) chips surface. Due to the concurrently improved sensitivity and biocompatibility of the designed nanohybrid film, Au decorated ZnO-Nanorod biosensors demonstrate exceptional detection of HPV-16 E6 oncogene, the cancer biomarker for HPV infected cervical cancers. This sensor displayed high levels of sensitivity by detecting as low as 1fM of viral E6 gene target. The sensor also exhibited a stable functional life span of more than 5 weeks, good reproducibility and high discriminatory properties against HPV-16. Sensor current responses are obtained from cultured cervical cancer cells which are close to clinical cancer samples. Hence, the developed sensor is an adaptable tool with high potential for clinical diagnosis especially useful for economically challenged countries/regions.

Sodium titanate nanotubes for efficient transesterification of oils into biodiesel.

In this work, sodium titanate nanotubes were prepared by a hydrothermal method for 23 h at 160 °C and characterized by high-resolution transmission electron microscopy (HRTEM), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) methods, and Fourier transform infrared (FT-IR) spectroscopy. The obtained nanotubes were used as catalysts in the transesterification of pure and cooked oils under different experimental conditions (molar ratio, temperature, catalyst weight, and time). The catalyst showed high efficiency depending on the chosen conditions. The biodiesel yield was found to be 95.9% at 80 °C for 2 h. The catalyst also showed high activity for cooked oil conversion, with yields of 96.0, 96.0, and 93.58% for the first, second, and third uses of oil, respectively. The methanol was recycled and used in another transesterification experiment, and the biodiesel yield reached 91%. Density functional theory, Monte Carlo simulation, and molecular dynamics simulation were employed to clearly understand the transesterification mechanism. The transesterification reaction is represented by a pseudo-first-order kinetics model. Graphical Abstract .

Interfacing the Cell with "Biomimetic Membrane Proteins".

Integral membrane proteins mediate a myriad of cellular processes and are the target of many therapeutic drugs. Enhancement and extension of the functional scope of membrane proteins can be realized by membrane incorporation of engineered nanoparticles designed for specific diagnostic and therapeutic applications. In contrast to hydrophobic insertion of small amphiphilic molecules, delivery and membrane incorporation of particles on the nanometric scale poses a crucial barrier for technological development. In this perspective, the transformative potential of biomimetic membrane proteins (BMPs), current state of the art, and the barriers that need to be overcome in order to advance the field are discussed.

Biomedical potential of clay nanotube formulations and their toxicity assessment.

Introduction: Halloysite clay nanotubes (HNTs) are a naturally abundant and biocompatible aluminosilicate material with a structure able to encapsulate 10-20% of drugs. These features are attractive toward the clinical application in controlled drug delivery, tissue engineering and regenerative medicine. Areas covered: We describe the application of HNTs as a viable method for clinical purposes, particularly developing formulations for prophylaxis, diagnosis and therapeutics, having a special attention to these nanotubes bio-safety. HNTs may be used for pharmaceuticals, biopharmaceuticals, wound healing, bone regeneration, dental repair, hair surface engineering and biomimetic applications. Expert opinion: HNTs are a versatile, safe and biocompatible nanomaterial used for drug encapsulation for numerous clinical applications. The studies here reviewed confirm the HNTs biocompatibility, describing their low toxicity. Further developments will be made regarding the long-term efficacy of halloysite-based treatments in humans, concentrating mostly on topical applications.

High-activity Fe3O4 nanozyme as signal amplifier: A simple, low-cost but efficient strategy for ultrasensitive photoelectrochemical immunoassay.

Sensitive but with simple, inexpensive detection of disease-related biomarkers in real biological samples is of quite necessity for early diagnosis and disease surveillance. We herein first introduced high-activity Fe3O4 nanozyme as signal amplifier to develop an ultrasensitive photoelectrochemical (PEC) immunoassay, which meanwhile has the distinct merits of both simplicity and low cost compared with previously reported enzyme-labeling PEC immunoassays. In the proposal, to illustrate and describe the PEC platform, prostate-specific antigen (PSA, Ag) was used as a target model. Specifically, ZnO nanorods (ZnO-NRs) grown vertically on a bare indium-tin oxide (ITO) electrode was deposited with ZnIn2S4 nanocrystals, producing ZnIn2S4/ZnO-NRs/ITO photoelectrode as the PEC matrix to modify capture PSA antibody (Ab1). Histidine-modified Fe3O4 (his-Fe3O4) nanozyme as signal amplifier was linked with signal PSA antibody (Ab2) to form his-Fe3O4@Ab2 conjugate, and was anchored through specific sandwich immunoreaction. The labeling his-Fe3O4 nanozyme acted as a peroxidase to induce the generation of the insoluble and insulating precipitation, resulting in an evident decrease in the photocurrent signal. On account of combined effects of high catalytic efficiency of the his-Fe3O4 nanozyme and excellent PEC properties of the ZnIn2S4/ZnO-NRs/ITO photoelectrode, ultralow detection limit of 18 fg/mL for target Ag detection was achieved. Besides, as high-activity his-Fe3O4 nanozyme has substituted natural enzyme as signal amplifier, simplicity and low cost of the PEC immunoassay was realized.

Manganese dioxide Nanorods/electrochemically reduced graphene oxide nanocomposites modified electrodes for cost-effective and ultrasensitive detection of Amaranth.

A novel manganese dioxide nanorods-electrochemically graphene oxide nanocomposites modified glassy carbon electrode (MnO2NRs-ErGO/GCE) was developed for the rapid and sensitive detection of Amaranth in foodstuffs. The morphology, structure and composition of MnO2NRs, ErGO, and MnO2/ErGO were characterized by SEM and XRD. The electrochemical behavior of Amaranth on the bare GCE, ErGO/GCE, and MnO2NRs-ErGO/GCE were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The voltammetric conditions (including pH, scan rate, accumulation potential as well as time) were optimized systematically. Due to large electrochemical active area and low charge transfer resistance, the MnO2NRs-ErGO/GCE exhibited a great enhancement effect on the oxidation of Amaranth, and significant increased the oxidation peak current ipa (approximately 38-fold increase compared to that of bare GCE). Under the optimum voltammetric conditions, the ipa varied linearly with Amaranth concentration in the range of 0.02 µM-10 µM, and 10 µM-400 µM with a low detection limit of 1.0 nM (S/N = 3). Moreover, satisfactory results were obtained in the analysis of real samples. Together with the merits of rapidness, cost-effectivity, high sensitivity and selectivity, the result suggests the proposed MnO2NRs-ErGO/GCE have broad application prospects on the sensitive detection of Amaranth in various real samples.

An assessment of retention behavior for gold nanorods in asymmetrical flow field-flow fractionation.

Applications of asymmetrical flow field-flow fractionation (AF4) continue to expand rapidly in the fields of nanotechnology and biotechnology. In particular, AF4 has proven valuable for the separation and analysis of particles, biomolecular species (e.g., proteins, bacteria) and polymers (natural and synthetic), ranging in size from a few nanometers to several micrometers. The separation of non-spheroidal structures (e.g., rods, tubes, etc.) with primary dimensions in the nanometer regime, is a particularly challenging application deserving of greater study and consideration. The goal of the present study was to advance current understanding of the mechanism of separation of rod-like nano-objects in the AF4 channel. To achieve this, we have systematically investigated a series of commercially available cetyltrimethylammonium bromide stabilized gold nanorods (AuNRs), with aspect ratios from 1.7 to 10. Results show clearly that the retention time is principally dependent on the translational diffusion coefficient of the AuNRs. Equations used to calculate translational and rotational diffusion coefficients (cylinder and prolate ellipsoid models) yield similarly good fits to experimental data. Well characterized gold nanorods (length and diameter by transmission electron microscopy) can be used as calibrants for AF4 measurements allowing one to determine the aspect ratio of nanorod samples based on their retention times. Graphical abstract ᅟ.

Biosafety assessment of conducting nanostructured materials by using co-cultures of neurons and astrocytes.

Neural electrode implants are made mostly of noble materials. We have synthesized a nanostructured material combining the good electrochemical properties of iridium oxide (IrOx) and carbon-nanotubes (CNT) and the properties of poly(3,4-ethylenedioxythiophene) (PEDOT). IrOx-CNT-PEDOT charge storage capacity was lower than that of IrOx and IrOx-CNT, but higher than that of other PEDOT-containing hybrids and Pt. Cyclic voltammetry, SEM, XPS and micro-Raman spectroscopy suggest that PEDOT encapsulates IrOx and CNT. In our search for a cell culture platform that could optimize modelling the in vivo environment, we determined cell viability, neuron and astrocyte functionality and the response of astrocytes to an inflammatory insult by using primary cultures of neurons, of astrocytes and co-cultures of both. The materials tested (based on IrOx, CNT and PEDOT, as well as Pt as a reference) allowed adhesion and proliferation of astrocytes and full compatibility for neurons grown in co-cultures. Functionality assays show that uptake of glutamate in neuron-astrocyte co-culture was significantly higher than the sum of the uptake in astrocytes and neurons. In co-cultures on IrOx, IrOx-CNT and IrOx-CNT-PEDOT, glutamate was released by a depolarizing stimulus and induced a significant increase in intracellular calcium, supporting the expression of functional NMDA/glutamate receptors. LPS-induced inflammatory response in astrocytes showed a decreased response in NOS2 and COX2 mRNA expression for IrOx-CNT-PEDOT. Results indicate that neuron-astrocyte co-cultures are a reliable model for assessing the biocompatibility and safety of nanostructured materials, evidencing also that hybrid IrOx-CNT-PEDOT nanocomposite materials may offer larger resistance to inflammatory insults.

Adsorption studies of volatile organic compounds on germanene nanotube emitted from banana fruit for quality assessment - A density functional application.

We report the density functional application of adsorption behavior of volatile organic compounds (VOCs) emitted from the different ripening stages of banana fruit on germanene nanotube (GNT). Initially, the geometric structural stability of GNT is ascertained and the tunable electronic properties lead to the application of GNT as a base material in order to know the adsorption features of VOCs. We further explored the adsorption behavior of VOCs on to GNT through charge transfer, adsorption energy and band gap variation. The energy band structure and density of states (DOS) spectrum shows a noteworthy variation upon adsorption of different VOCs on to the GNT. Also, the electron density variation is noticed upon adsorption of VOCs emitted from the banana on to the GNT base material. Besides, the difference in the energy band gap of GNT upon emission of VOCs from banana leads to the use of GNT as a chemiresistor to assess fruit freshness with adsorption studies. Moreover, we suggest the use of GNT to discriminate the fruit freshness of banana through the adsorption process of VOCs on to GNT.

Cyclic peptide-poly(HPMA) nanotubes as drug delivery vectors: In vitro assessment, pharmacokinetics and biodistribution.

Size and shape have progressively appeared as some of the key factors influencing the properties of nanosized drug delivery systems. In particular, elongated materials are thought to interact differently with cells and therefore may allow alterations of in vivo fate without changes in chemical composition. A challenge, however, remains the creation of stable self-assembled materials with anisotropic shape for delivery applications that still feature the ability to disassemble, avoiding organ accumulation and facilitating clearance from the system. In this context, we report on cyclic peptide-polymer conjugates that self-assemble into supramolecular nanotubes, as confirmed by SANS and SLS. Their behaviour ex and in vivo was studied: the nanostructures are non-toxic up to a concentration of 0.5 g L-1 and cell uptake studies revealed that the pathway of entry was energy-dependent. Pharmacokinetic studies following intravenous injection of the peptide-polymer conjugates and a control polymer to rats showed that the larger size of the nanotubes formed by the conjugates reduced renal clearance and elongated systemic circulation. Importantly, the ability to slowly disassemble into small units allowed effective clearance of the conjugates and reduced organ accumulation, making these materials interesting candidates in the search for effective drug carriers.

Efficient label-free chemiluminescent immunosensor based on dual functional cupric oxide nanorods as peroxidase mimics.

Dual-functional cupric oxide nanorods (CuONRs) as peroxidase mimics are proposed for the development of a flow-through, label-free chemiluminescent (CL) immunosensor. Forming the basis of this cost-efficient, label-free immunoassay, CuONRs, synthesized using a simple hydrothermal method, were deposited onto epoxy-activated standard glass slides, followed by immobilization of biotinylated capture antibodies through a streptavidin bridge. The CuONRs possess excellent catalytic activity, along with high stability as a solid support. Antigens could then be introduced to the sensing system, forming large immunocomplexes that prevent CL substrate access to the surface, thereby reducing the CL signal in a concentration dependent fashion. Using carcinoembryonic antigen (CEA) as a model analyte, the proposed label-free immunosensor was able to rapidly determine CEA with a wide linear range of 0.1-60ngmL-1 and a low detection limit of 0.05ngmL-1. This nanozyme-based immunosensor is simple, sensitive, cost-efficient, and has the potential to be a very promising platform for fast and efficient biosensing applications.

Green approach for one-pot synthesis of silver nanorod using cellulose nanocrystal and their cytotoxicity and antibacterial assessment.

Herein, this research addresses an innovative approach for one-pot synthesis of highly stabilized silver nanorods in powder form at concentration as high as feasible to be proposed in large-scale production via cellulose nanocrystals (CNC). For the first time, CNC without any surface modification in the presence of alkali is acting as both reducing and stabilizing agent for assembling of Ag nanorods. Extraction of CNC from cotton is carried out as per to acid hydrolysis technique. Thorough assessments of Ag nanorods formation, structural and morphological characteristics of Ag nanorods were investigated by making use of UV-vis spectroscopy, TEM, DLS, AFM and X-ray diffraction (XRD) analysis. Also, the antibacterial activity and cytotoxicity of Ag nanorod were investigated. Research outputs signify that, Ag nanorods has been successfully prepared through an effectively approach by virtue of the textural feature of CNC as a mediator. Results revealed the great tendency of CNC toward reducing and stabilizing the as formed Ag nanorods even at high concentration. Results also demonstrated that Ag nanorods have not merely remarkably antibacterial activity towards Gram-positive and Gram-negative bacteria, but safe for using in human life, which exhibited no effect on eukaryotic cells.

Biotechnological mass production of DNA origami.

DNA nanotechnology, in particular DNA origami, enables the bottom-up self-assembly of micrometre-scale, three-dimensional structures with nanometre-precise features. These structures are customizable in that they can be site-specifically functionalized or constructed to exhibit machine-like or logic-gating behaviour. Their use has been limited to applications that require only small amounts of material (of the order of micrograms), owing to the limitations of current production methods. But many proposed applications, for example as therapeutic agents or in complex materials, could be realized if more material could be used. In DNA origami, a nanostructure is assembled from a very long single-stranded scaffold molecule held in place by many short single-stranded staple oligonucleotides. Only the bacteriophage-derived scaffold molecules are amenable to scalable and efficient mass production; the shorter staple strands are obtained through costly solid-phase synthesis or enzymatic processes. Here we show that single strands of DNA of virtually arbitrary length and with virtually arbitrary sequences can be produced in a scalable and cost-efficient manner by using bacteriophages to generate single-stranded precursor DNA that contains target strand sequences interleaved with self-excising 'cassettes', with each cassette comprising two Zn2+-dependent DNA-cleaving DNA enzymes. We produce all of the necessary single strands of DNA for several DNA origami using shaker-flask cultures, and demonstrate end-to-end production of macroscopic amounts of a DNA origami nanorod in a litre-scale stirred-tank bioreactor. Our method is compatible with existing DNA origami design frameworks and retains the modularity and addressability of DNA origami objects that are necessary for implementing custom modifications using functional groups. With all of the production and purification steps amenable to scaling, we expect that our method will expand the scope of DNA nanotechnology in many areas of science and technology.