Serial Ultrasonography for the Assessment of Healing of Lower Extremity Bone Stress Injury and Correlation With Return to Sport/Exercise.

BACKGROUND: Lower extremity bone stress injuries (BSIs) are common among athletes who participate in high-impact activities. Conventional imaging is limited in assessing healing of BSIs. HYPOTHESIS: Serial ultrasonography (US) can identify changes in appearance of lower extremity BSIs over time that can be correlated with symptoms and return to exercise/sport. STUDY DESIGN: Cohort observational study. LEVEL OF EVIDENCE: Level 3. METHODS: Adults 18 to 50 years old with a recent exercise-associated BSI of distal tibia/fibula or metatarsals diagnosed by magnetic resonance imaging (MRI) were enrolled. US was performed every 2 weeks for 12 weeks. The sonographic appearance (soft tissue edema, periosteal reaction, hyperemia on power Doppler, callus) was correlated with the numerical rating scale (NRS) for pain and ability to return to sport/exercise. RESULTS: A total of 30 patients were enrolled (mean age, 35.3 ± 7.7 years; 21 [70.0%] female). The tibia was most frequently affected (n = 15, 50.0%), followed by metatarsals (n = 14, 46.7%) and fibula (n = 1, 3.3%). At week 4, 25 of 30 (83.3%) had at least 1 US finding associated with the BSI. The degree of hyperemia was correlated with NRS at weeks 4 and 6 (Spearman correlations [ρ] 0.45 [0.09, 0.69] and 0.42 [0.07, 0.67], respectively), as well as return to sport/exercise at week 6 (ρ -0.45 [-0.68, -0.09]). US soft tissue edema was also correlated with NRS at week 6 (ρ 0.38 [0.02, 0.65]). CONCLUSION: Serial US of lower extremity BSIs can provide objective measures of healing. US findings were correlated with clinical outcomes at multiple timepoints. CLINICAL RELEVANCE: US may have advantages over conventional imaging for monitoring healing of lower extremity BSIs. Further research is needed to better understand the prognostic value of these sonographic indicators of BSI healing and role in assessing readiness for return to sport/exercise.

New biomechanical models for cumulative plantar tissue stress assessment in people with diabetes at high risk of foot ulceration.

To better understand stress-related foot ulceration in diabetes, the cumulative plantar tissue stress (CPTS) should be quantified accurately, but also feasibly for clinical use. We developed multiple CPTS models with varying complexity and investigated their agreement with the most comprehensive reference model available. We assessed 52 participants with diabetes and high foot ulcer risk for barefoot and in-shoe plantar pressures during overground walking at different speeds, standing, sit-to-stand transitions, and stair walking. Level of these weight-bearing activities along with footwear adherence were objectively measured over seven days. The reference CPTS-model included the pressure-time integrals of each walking stride (barefoot and shod), specified for speed; standing period (barefoot and shod); transition and stair walking stride. We compared four CPTS-models with increasing number of input parameters (models 1-4) with the reference model, using repeated measures ANOVA, Pearson's correlation and Bland-Altman plots. For the clinically-relevant metatarsal 1 region, calculated CPTS was lower for the four CPTS-models compared to reference (Δ770, Δ466, Δ24 and Δ12 MPa.s/day, respectively). CPTS associated moderately with the reference model for model 1 (r = 0.551) and very strongly for models 2-4 (r ≥ 0.937). Limits of agreement were large for models 1 and 2 (-728;2269 and -302;1233 MPa.s/day), and small for models 3 and 4 (-43;92 and -54;78 MPa.s/day). CPTS in models 3 and 4 best agreed with the reference model, where model 3 required fewer parameters, i.e., pressure-time integrals of each walking stride and standing period while barefoot and shod. These parameters need to be included for accurate and feasible CPTS assessment.

Positron emission tomography assessment of metacarpal/metatarsal condylar fractures post surgical repair: Prospective study in 14 racehorses.

OBJECTIVES: To assess 18F-sodium fluoride (18F-NaF) positron emission tomography (PET) findings associated with metacarpal/metatarsal condylar fractures at the time of fracture repair and through healing. STUDY DESIGN: Prospective descriptive study. ANIMALS: Fourteen Thoroughbred racehorses. METHODS: 18F-NaF PET was performed within 4 days of surgical metacarpal/metatarsal condylar fracture repair, on both the injured and contralateral limb. Follow-up PET scans were offered at 3- and 5-months post fracture repair. Areas of abnormal uptake were assessed using a previously validated grading system. RESULTS: Eight fractures were located in the parasagittal groove (PSG) (six lateral and two medial) and six fractures were located abaxial to the PSG (non-PSG) through the palmar/plantar condyle (all lateral). All horses in the latter group had uptake in the lateral palmar condyle of the contralateral limb suggestive of stress remodeling. Three horses with PSG fractures had uptake in a similar location in the contralateral limb. Horses with lateral condylar fracture only presented minimal or mild uptake in the medial condyle, which is considered atypical in the front limbs for horses in full training. Four horses developed periarticular uptake in the postoperative period suggestive of degenerative joint disease, three of these horses had persistent uptake at the fracture site. These four horses did not return to racing successfully. CONCLUSION: The findings of this study provide evidence of pre-existing lesions and specific uptake patterns in racehorses suffering from metacarpal/metatarsal condylar fractures. CLINICAL SIGNIFICANCE: PET has a possible role in the prevention, diagnosis, and postoperative monitoring of metacarpal/metatarsal condylar fractures in racehorses.

Assessment and Management of Atraumatic First Metatarsophalangeal Joint Pain.

Nontraumatic pain in the first metatarsophalangeal joint is frequent and can be debilitating. The metatarsophalangeal joint complex comprises four articulating surfaces including the first metatarsal, the proximal phalanx, and tibial and fibular sesamoids, which are all contained within a synovial capsule. The most common causes of pain are hallux valgus and hallux rigidus. However, other diagnoses, such as functional hallux limitus, sesamoiditis, gout, and inflammatory autoimmune arthritis, need to be considered as well. A systematic approach is key to accurately diagnose the source of pain, which can sometimes be the result of more than one condition. The most important clinical information to obtain is a focused history, meticulous clinical examination based on understanding the precise anatomy and biomechanics of the first metatarsophalangeal joint, and analysis of the relevant imaging. Each pathology has a different treatment algorithm, as such, understanding the pathoanatomy and biomechanics is important in forming an effective treatment plan.

Interreader reliability assessment of hallux valgus evaluation on dorsoplantar weightbearing radiographs from a prospective multi-center trial and correlation with patient-reported outcome measures.

OBJECTIVE: To determine inter-reader reliability (IRR) of hallux valgus (HV) related parameters, i.e. intermetatarsal angle (IMA), hallux valgus angle (HVA), lateral round sign of the first metatarsal, tibial sesamoid position (TSP), metatarsus adductus angle (MAA), transverse osseous foot width, 1st MT length, MTP osteoarthritis (OA), and distal metatarsal articular angle (DMAA). These were correlated with patient-reported outcome measures (PROMs). MATERIALS AND METHODS: A prospective single-arm Level 3 multicenter clinical trial in which standardized radiographs and PROMs were collected at the time of the initial patient visit for pre-operative assessment. Two musculoskeletal radiologists performed measurements blinded to each other's reads and clinical information. Intraclass coefficient and kappa were obtained for inter-reader analysis. A partial spearman rank order was used to correlate the measurements with PROMs. RESULTS: The final cohort size of 183 patients had mean age of 40.77 years, mean body mass index was 26.11 kg/m2, with 91.2% females and 8.7% males. There was excellent IRR for HVA (0.96, CI: [0.94,0.97]), IMA (0.92, CI: [0.89,0.94]), transverse osseous foot width (0.99, CI: [0.98,1.00]), and DMAA (0.80, CI: [0.74, 0.85]), good agreement for TSP (0.73, CI:[0.67,0.79]) and MAA (0.67, CI: [0.16, 0.84]), fair agreement for MTP OA (0.48, CI: [0.36,0.59]), and poor agreement for lateral round sign (0.32, CI: [0.11, 0.52]. The negative correlation of increasing transverse osseous foot width with worsening PROMIS physical but better MOxFQ and VAS scores is likely spurious. CONCLUSION: Good to excellent inter-reader reliability was observed for the most often used measurements for HV assessment without major trends in their correlations with PROMs. Lateral round sign is not a reliable finding in HV deformity.

Radiographic Assessment of Relationship Between Medial Cuneiform Obliquity and Hallux Valgus.

The research results are inconsistent that assessing whether the increased obliquity of the distal articular surface of the medial cuneiform leads to an increase in hallux valgus angle. Thus, this study investigated the relationship between distal medial cuneiform obliquity and hallux valgus by measuring various angles in weightbearing anteroposterior radiographs of the foot. In total, 679 feet of 538 patients with the radiographs were included in the study. We measured radiographic parameters including hallux valgus angle, first to second intermetatarsal angle, metatarsus adductus angle, first metatarsus cuneiform angle, distal medial cuneiform angle, and first proximal metatarsal articular angle. The surface morphology (flat or curved) of the first tarsometatarsal joint was also recorded. Our results analysis revealed a weak negative correlation between distal medial cuneiform angle and both hallux valgus angle and first to second intermetatarsal angle, contrary to our assumption. So we believe that distal medial cuneiform angle was relatively constant and it cannot be used as a characteristic angle for quantifying hallux valgus. First metatarsus cuneiform angle was a characteristic indicator of hallux valgus and was positively correlated with its severity (p < .000), indicating that it can be used to measure the size of hallux valgus. It can also be used as a reference factor for the first metatarsal osteotomy in clinical bunion orthopedics. First tarsometatarsal joint morphology was unrelated to hallux valgus, whereas metatarsus adductus angle, and first proximal metatarsal articular angle should be considered in hallux valgus.

Intra­ and Interobserver Reliability of Yamaguchi's Method for the Assessment of First Metatarsal Pronation in Hallux Valgus Deformity.

Pronation of the first metatarsal is a risk factor for the formation and progression of the hallux valgus deformity. Recently, Yamaguchi et al published a study that showed how the round sign increases on digitally reconstructed radiography taken from a CT scan when pronation is applied. In this study, the shape of the lateral edge of the first metatarsal head was evaluated on weightbearing dorsoplantar radiographs. Yamaguchi's signs were presented to observers after the visual presentation of each foot as an image. The best-fit circle was drawn using the PACS drawing function. Ninety radiographs of adults presenting hallux valgus deformities were classified as mild-to-moderate, based on hallux valgus angle and intermetatarsal angle. The global average observations were 3.72 ± 3.92 (range 2.3°-4.6°). The interclass correlation (Fleiss Kappa index κ = 0.225) and the Spearman correlation (0.16 of Kappa) coefficients were poor for interobserver measurements and statistically significant. Using the linear model, there was no significant variability between the repetitions corresponding to each observer (t-value -1.527, p value .127). Our findings show that the Yamaguchi method can be very subjective and should not be the exclusive technique to assess the rotation of the first metatarsal or head roundness.

Classification of avulsion fractures of the fifth metatarsal base using three-dimensional CT mapping and anatomical assessment: a retrospective case series study.

BACKGROUND: To clarify the injury mechanism of the avulsion fracture of the fifth metatarsal combining 3-dimensional (3D) fracture mapping with anatomical measurements. METHODS: Two hundred twenty-two patients with the avulsion fractures of the fifth metatarsal base, who were admitted to our hospital from August 2015 to August 2020. The computed tomography (CT) scans were used to generate the 3-D images of all mapped fracture lines for the avulsion fractures of the fifth metatarsal base were compiled in an overall 3D image. The fifth metatarsal base of 8 unpaired lower limbs of adult Asian frozen cadaveric specimens were also dissected to observe and measure the specific locations of the attachment points of the peroneus brevis, lateral band of the plantar fascia, and peroneus tertius to the fifth metatarsal base. RESULTS: Based on the type of fracture line produced and the specific locations of the attachment points of the tendons or fascia, the avulsion fractures of the fifth metatarsal base can be classified into three types: type I predominantly involves the action of the lateral band of the plantar fascia; type II predominantly involves the action of the peroneus brevis; type IIIA involves the joint action of the peroneus brevis and lateral band of the plantar fascia with one fracture line, and type IIIB involves the joint action of the peroneus brevis and lateral band of the plantar fascia with two fracture lines. CONCLUSION: The lateral band of the plantar fascia and peroneus brevis play a major role, either separately or together, in avulsion fractures of the fifth metatarsal base. With this knowledge, we propose a novel classification based on the injury mechanism, which can serve as a reference for clinical treatment and diagnosis. LEVEL OF EVIDENCE: Level III, retrospective case series.

Distal Metatarsal Articular Angle in Hallux Valgus Deformity. Fact or Fiction? A 3-Dimensional Weightbearing CT Assessment.

BACKGROUND: The Distal Metatarsal Articular Angle (DMAA) was previously described as an increase in valgus deformity of the distal articular surface of the first metatarsal (M1) in hallux valgus (HV). Several studies have reported poor reliability of this measurement. Some authors have even called into question its existence and consider it to be the consequence of M1 pronation resulting in projection of the round-shaped lateral edge of M1 head.Our study aimed to compare the DMAA in HV and control populations, before and after computer correction of M1 pronation and plantarflexion with a dedicated weightbearing CT (WBCT) software. We hypothesized that after computerized correction, DMAA will not be increased in HV compared to controls. METHODS: We performed a retrospective case-control study including 36 HV and 20 control feet. In both groups, DMAA was measured as initially described on conventional radiographs (XR-DMAA) and WBCT by measuring the angle between the distal articular surface and the longitudinal axis of M1. Then, the DMAA was measured after computerized correction of M1 plantarflexion and coronal plane rotation using the α angle (3d-DMAA). RESULTS: The XR-DMAA and the 3d-DMAA showed higher significant mean values in HV group compared to controls (respectively 25.9 ± 7.3 vs 7.6 ± 4.2 degrees, P < .001, and 11.9 ± 4.9 vs 3.3 ± 2.9 degrees, P < .001).Comparing a small subset of precorrected juvenile HV (n=8) and nonjuvenile HV (n=28) demonstrated no significant difference in the measure DMAA values. On the other hand, the α angle was significantly higher in the juvenile HV group (21.6 ± 9.9 and 11.4 ± 3.7 degrees; P = .0046). CONCLUSION: Although the valgus deformity of M1 distal articular surface in HV is overestimated on conventional radiographs, comparing to controls showed that an 8.6 degrees increase remained after confounding factors' correction. CLINICAL RELEVANCE: After pronation computerized correction, an increase in valgus of M1 distal articular surface was still present in HV compared to controls. LEVEL OF EVIDENCE: Level III, retrospective case-control study.

Screw versus staple fixation for Akin osteotomy.

INTRODUCTION: Akin osteotomies are commonly fixed with a screw or staple. Hardware-related symptoms are not uncommon. We compared the outcomes and costs of the two implants. METHODS: We evaluated 74 Akin osteotomies performed in conjunction with first metatarsal osteotomy for hallux valgus. The osteotomy was fixed with a headless compression screw in 39 cases and a staple in 35 cases. We looked at the implant-related complications, removal of metalwork, revision, non-union and cost. Pre- and postoperative hallux valgus interphalangeal (HI) angles and length of the proximal phalanx were measured. RESULTS: There was 100% union, no failure of fixation, no revision surgery and no delayed union in either group. The radiological prominence of screws was significant (p=0.02), but there was no significant difference in soft-tissue irritation (p=0.36) or removal of implants (p=0.49). Two cortical breaches (5.8%) occurred in staple fixation and 4 (10.2%) in screw fixation (not statistically significant (NS), p=0.50). The mean improvement in HI angle was 4.3° with screw fixation and 4.1° with staple fixation (NS, p=0.69). The mean shortening of the proximal phalanx was 2.5mm with screw fixation and 2.3mm with staple fixation (NS, p=0.64). The total cost was £1,925 for staple fixation and £4,290 for screw fixation. CONCLUSIONS: Staple and screw fixation are reproducible modalities with satisfactory outcomes, but screw fixation is expensive. We conclude staple fixation is a cost-effective alternative.

The Assessment of First Metatarsal Rotation in the Normal Adult Population Using Weightbearing Computed Tomography.

BACKGROUND: The importance of the rotational profile of the first metatarsal is increasingly recognized in the surgical planning of hallux valgus. However, rotation in the normal population has only been measured in small series. We aimed to identify the normal range of first metatarsal rotation in a large series using weightbearing computed tomography (WBCT). METHODS: WBCT scans were retrospectively analyzed for 182 normal feet (91 patients). Hallux valgus angle, intermetatarsal angle, anteroposterior/lateral talus-first metatarsal angle, calcaneal pitch, and hindfoot alignment angle were measured using digitally reconstructed radiographs. Patients with abnormal values for any of these measures and those with concomitant pathology, previous surgery, or hallux rigidus were excluded. Final assessment was performed on 126 feet. Metatarsal pronation (MPA) and α angles were measured on standardized coronal computed tomography slices. Pronation was recorded as positive. Intraobserver and interobserver reliability were assessed using intraclass correlation coefficients (ICCs). RESULTS: Mean MPA was 5.5 ± 5.1 (range, -6 to 25) degrees, and mean α angle was 6.9 ± 5.5 (range, -5 to 22) degrees. When considering the normal range as within 2 standard deviations of the mean, the normal range identified was -5 to 16 degrees for MPA and -4 to 18 degrees for α angle. Interobserver and intraobserver reliability were excellent for both MPA (ICC = 0.80 and 0.97, respectively) and α angle (ICC = 0.83 and 0.95, respectively). There was a moderate positive correlation between MPA and α angle (Pearson coefficient 0.68, P < .001). CONCLUSION: Metatarsal rotation is variable in normal feet. Normal MPA can be defined as less than 16 degrees, and normal α angle can be defined as less than 18 degrees. Both MPA and α angle are reproducible methods for assessing rotation. Further work is needed to evaluate these angles in patients with deformity and to determine their significance when planning surgical correction of hallux valgus. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Distal Metatarsal Minimally Invasive Osteotomy (DMMO): Surgical technique, variants, indications, and treatment decision-tree.

BACKGROUND: Metatarsal osteotomy is a major means of treating mechanical metatarsalgia. Open techniques are widely used, and notably that described by Weil. They have, however, certain drawbacks, and new types of osteotomy have been developed. Percutaneous techniques are presently very much in favor, and Distal Metatarsal Minimally Invasive Osteotomy (DMMO) has emerged as a treatment for metatarsalgia. Although very widely used, it is poorly codified in the literature. METHOD: The present study detailed DMMO techniques and their variants (oblique and reverse), with corresponding indications and treatment decision-tree. RESULTS: Initial findings seem encouraging, with functional results comparable to those of open surgery. Postoperative edema and radiologic bone healing time seem to be longer in DMMO. There is, on the other hand, no difference regarding stiffness. CONCLUSION: DMMO is an effective option to treat metatarsalgia, with variants enabling adaptation to foot morphology, but needing confirmation by studies with higher levels of evidence.

Dynamic Loading Assessment at the Fifth Metatarsal in Elite Athletes With a History of Jones Fracture.

OBJECTIVE: We hypothesize that athletes who have suffered Jones fractures will apply significantly higher loads at the fifth metatarsal base during athletic activities compared with matched uninjured athletes. DESIGN: Sixteen athletes were recruited to participate. Eight athletes had a history of Jones fracture, and 8 age, gender, and position-matched athletes without a history of foot injury were recruited as controls. SETTING: Institutional study at Stanford University. PARTICIPANTS: Sixteen athletes with/without a history of foot injury from Stanford University. INTERVENTIONS: Athletes performed a standardized series of movements while wearing calibrated, wireless pressure mapping insoles, and then again with their custom corrective insoles. MAIN OUTCOME MEASURES: Peak pressure, mean pressure, maximum force, and force-time integral (ie, impulse) were recorded for each activity. RESULTS: Athletes with a history of Jones fracture showed a significantly increased peak pressure (183 ± 23 vs 138 ± 7 kPA), mean pressure (124 ± 14 vs 95 ± 4 kPA), and maximum force (15 ± 1.2 vs 12 ± 1.2%BW) at the fifth metatarsal base during walking and running compared with uninjured matched controls (all P < 0.05). CONCLUSIONS: Athletes with a history of Jones fracture exert significantly increased peak and mean forces at the base of the fifth metatarsal during common athletic activities. Custom orthoses do not seem to offload this region in all cases. Increased loads may contribute to the development of stress injury to the fifth metatarsal during repetitive loading, and ultimately fracture of the bone.

Radiographic Assessment of Relative First Metatarsal Length Following Modified Lapidus Procedure.

BACKGROUND: The modified Lapidus is a surgical procedure for managing moderate to severe hallux valgus, especially in the presence of first tarsometatarsal joint arthritis or hypermobility. It has good long-term results but reportedly can lead to transfer metatarsalgia due to inherent shortening of the first metatarsal. METHODS: A retrospective analysis of all adult patients who underwent a modified Lapidus procedure during a 3-year period was performed. Clinical notes were evaluated to look for nonunion or any other complications related to the surgery. Pre- and postoperative standard weightbearing radiographs were used to establish the relative metatarsal length (RML), intermetatarsal angle (IMA), hallux valgus angle (HVA), and distal metatarsal articular angle (DMMA). A total of 69 modified Lapidus procedures were identified, with 32 included in the study. RESULTS: The mean pre- and postoperative RMLs were -0.8 and -4.9 mm, respectively. The average RML shortening due to the procedure was -4.1 (P < .0001). The mean pre- and postoperative IMAs were 15 and 5 degrees, respectively (P < .0001). The mean pre- and postoperative HVAs were 33 and 9 degrees, respectively (P < .0001). One patient reported transfer metatarsalgia, which was attributed to elevation of the first metatarsal. CONCLUSION: We found a statistically significant degree of shortening of the relative length of the first metatarsal without any clinically significant metatarsalgia. The low rate of transfer metatarsalgia following the modified Lapidus procedure could be attributed to the sagittal plane correction and stability obtained by performing a first tarsometatarsal fusion. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Biomechanical and Histological Assessment of a Polyethylene Terephthalate Screw Retention Technology in an Ovine Metatarsal Fracture Model.

OBJECTIVE: Screw loosening in fracture fixation poses a clinical risk which may lead to implant failure, particularly in poor bone quality. The objective of this study was to examine the effectiveness of a novel screw retention technology (SRT) for increased screw purchase in a large animal metatarsal fracture model. STUDY DESIGN: This was a biomechanical, radiographic, and histological study utilizing an ovine metatarsal fracture model. Twenty-four sheep metatarsi underwent 3-mm ostectomies and were repaired with a nine-hole plate and 3.5-mm screws placed in oversized 3.5-mm holes to simulate worst case revision surgeries (i.e. no initial screw thread bone contact). Sheep were sacrificed at 3, 6 or 12 weeks (n = 6 each) post-operation. Post-sacrifice, each surgically implanted screw underwent either destructive mechanical testing or histomorphometric analyses. RESULTS: Treated metatarsi showed improved screw retention and normal fracture healing. Significant improvement in breakout strength and pullout strength of screws treated with the SRT were found as a function of healing time. Histologically, bone ingrowth at the screw interface was also shown to significantly increase with healing time. Improvements in fracture healing, indicated by an increase in bone fraction and decrease in void space at the osteotomy, were also observed with healing time. CONCLUSION: The results demonstrate the effectiveness of the SRT as a method for improved screw retention in a rescue-screw type scenario.

Assessment of Outcomes of a Metatarsal Bone Ostectomy for Chronic Plantar Ulcers: A Preliminary Study.

BACKGROUND: Clinical management of chronic plantar ulcers is a difficult issue in medical practice. Pressure overloading is a problem that needs to be resolved. Herein, we report a surgical method to reduce plantar pressure: a dorsal approach to a metatarsal ostectomy. METHODS: From March 2011 to October 2016, 16 patients suffering from chronic plantar ulcers underwent ostectomy procedures at Taipei Wan-Fang Municipal Hospital (Taipei Medical University). A bone segment about 0.5 to 1 cm long was removed via a dorsal foot approach. The plantar wound was treated with debridement only or was simultaneously covered with a skin graft. In total, 16 patients with an average age of 57.81 (SD, 11.6) years (12 males and 4 females) were included; 15 patients (93.75%) had a diagnosis of type 2 diabetes for a mean of 20.66 years (range, 5-30 years). The mean glycated hemoglobin was 9.14 g/dL (range, 5.2-13.2 g/dL). The mean plantar wound size was 5.72 cm. Four patients (25%) needed to receive a skin graft with a mean skin graft size of 8.13 cm. RESULTS: The mean follow-up time was 15.2 months. The plantar wounds completely healed in 14 patients (87.5%) in an average of 2.14 months. No plantar ulcer was complicated with recurrence, but transfer ulcers developed in 2 patients (12.5%) at an average of 7.5 months postoperatively. CONCLUSIONS: Metatarsal ostectomy surgery via a dorsal foot approach is an efficient way to reduce pressure overloading of chronic plantar wounds. Our study provides an alternative method to treat this difficult problem with a high wound healing rate and less recurrence.

Flexible fixation for ligamentous lisfranc injuries.

Lisfranc injuries require anatomic reduction and stabilization of the tarsometatarsal joints. We describe a novel technique that provides flexible fixation that is simple, cost-effective and that may offer certain advantages over more traditional techniques.

Radiographic Assessment of First Tarsometatarsal Joint Shape and Orientation.

BACKGROUND: Hypermobility within the first tarsometatarsal (TMT) joint is a predisposing factor for hallux valgus. The purpose of this study was to assess whether the shape and angulation of the first TMT joint are affected by the positioning of the foot in radiographs. METHODS: Ten adult above-knee fresh-frozen cadaveric specimens were placed into a radiolucent apparatus that allowed controlled angulation of each foot at 0, 5, 10, 15, and 20 degrees in dorsiflexion, plantarflexion, inversion, and eversion. For each specimen, the first TMT joint angle (1TMTJA), shape of the distal articular surface of the medial cuneiform (flat or curved), and image quality of the first TMT joint were measured. RESULTS: The mean value for 1TMTJA was 22.9 degrees (95% confidence interval [CI] 21.9-24). Individual anatomical variations of the specimens as well as the different angulations due to foot positioning significantly influenced the 1TMTJA (both P < .001). Joints that were found to have a flat configuration showed significantly increased 1TMTJA on average when compared to the ones with curved articular surface, 25.9 (95% CI 24.4-27.4) and 20.8 degrees (95% CI 19.5-22.0) (P < .001), respectively. Image quality for visualization of the first TMT joint was progressively better for increased angles of dorsiflexion and inversion. CONCLUSION: The shape and angulation of the first TMT joint on radiographic evaluation are affected by the positioning of the foot. CLINICAL RELEVANCE: Clinical usefulness of these radiographic characteristics is limited and should not influence operative planning in patients with possible instability of the first TMT joint.

Quantitative Assessment of the Obliquity of the First Metatarsal-Medial Cuneiform Articulation.

The so-called obliquity of the first metatarsal-medial cuneiform articulation has been described as an atavistic trait of human foot morphology, and it is commonly proposed as a relative risk factor for development of the hallux abductovalgus (HAV) deformity. The objectives of this investigation were to 1) provide descriptive normative radiographic data on a series of first metatarsal-medial cuneiform articulations and 2) correlate these findings to other common radiographic parameters used to define the HAV deformity. We measured radiographic parameters including the first intermetatarsal angle, hallux abductus angle, tibial sesamoid position, Engel's angle, and 2 measures of obliquity in the transverse and sagittal planes on a consecutive series of 136 weightbearing foot radiographic projections from subjects without a history of foot/ankle surgery or fracture/dislocation. Measurements were considered as continuous variables, graphically depicted against each other on frequency scatter plots, and analyzed by means of Pearson correlation coefficients. Only 1 bivariate comparison demonstrated a weak negative correlation (Engel's angle versus Obliquity_1 [Pearson -0.259; p = .002]). The results of this investigation did not demonstrate a statistically significant or clinically substantial relationship between the obliquity of the first metatarsal-cuneiform joint and common radiograph parameters of the HAV deformity. Although not specifically studied here, these results might potentially indicate function, as opposed to structure, in the developmental pathogenesis of the HAV deformity.

Hallux valgus interphalangeus: reliability of radiological assessment.

BACKGROUND: Reliable radiographic measurement of hallux valgus interphalangeus (HVI) deformity has a role in guiding surgical management. HVI can be assessed using: The aim of the study is to investigate the reliability of these radiological parameters. METHODS: Seventy foot radiographs in patients pre and post hallux valgus corrective surgery were assessed by 3 observers. HVI was assessed using the radiological measurements described above. Two-way random, single measure intra-class correlation coefficients were calculated to assess agreement. RESULTS: Inter-observer reliability showed good agreement for DASA [ICC=0.77(0.61-0.88)], and excellent for HIA [ICC=0.92(0.85-0.96)] and PDPA [ICC=0.91(0.84-0.96)]. Intra-observer reliability was excellent for all angles; DASA [ICC=0.88 (0.76-0.95)], HIA [ICC=0.94(0.86-0.97)] and PDPA [ICC=0.83(0.65-0.92)]. CONCLUSIONS: Reliability is good to excellent among these three radiological techniques for assessing HVI. The HIA and PDPA are slightly more reliable.