Rutin-Zn(II) complex promotes bone formation - A concise assessment in human dental pulp stem cells and zebrafish.

We have assessed the molecular role of Rutin and rutin-Zn(II) complex on osteoblast differentiation and mineralization in human dental pulp cells and zebrafish model. The biocompatibility of the rutin-Zn(II) complex was determined using MTT and chick embryotoxicity assays. Alizarin red staining and ALP measurements were performed to study the osteogenic role of Rutin and rutin-Zn(II) complex at the cellular level in hDPSCs. At molecular level, following rutin and rutin-Zn(II) exposure, the mRNA expression profile of osteoblast markers such Runx2, type 1 col, OC, and ON were investigated. In addition to this, the expression of negative regulators of osteoblast development such Smad7, Smurf1, and HDAC7 waere studied by Real time RT-PCR analysis. The osteogenic role of prepared complex under in vivo was studied by an in-house zebrafish scale model followed by osteoblast differentiation markers expression profiling and Ca:P level measurement by ICP-MS. Rutin and the rutin-Zn(II) complex were found to be non-toxic till 10 µM and increased the expression of osteoblast differentiation marker genes. It also enhanced calcium deposition in both in vitro and in vivo models. Osteogenic property of rutin-Zn(II) in hDPSCs was found be mediated by Smad7, Smurf1, and HDAC7 and enhancing Runx2 expression. Our study warrants the possible use of rutin-Zn(II) as naïve agent or in combination with other bone scaffolding systems/materials for bone tissue engineering applications.

The osteogenic differentiation of human bone marrow stromal cells induced by nanofiber scaffolds using bioinformatics.

This article aims to investigate the mechanism of behaviors of human bone marrow stromal cells (hBMSCs) affected by scaffold structure combining Monte Carlo feature selection (MFCS), incremental feature selection (IFS) and support vector machine (SVM). The specific differentially expressed genes (DEGs) of hBMSCs cultured on nanofiber (NF) scaffolds and freeform fabrication (FFF) scaffolds were obtained. Key genes were screened from common genes between osteogenic DEGs and NF specific DEGs with MFCS, IFS and SVM. The results demonstrated that NF scaffolds induced hBMSCs to express more genes related to osteogenic differentiation. Finally, 16 key genes were identified among the common genes. The common genes were significantly enriched in Rap1 signaling pathway, extracellular matrix and ossification. The results in this study suggested that the gene expression of hBMSCs was sensitive to NF scaffolds and FFF scaffolds, and the osteogenic differentiation of hBMSCs could be enhanced by NF scaffolds.

Assessment of novel surgical procedures using decellularised muscle and bioactive ceramic: a histological analysis.

Tissue regeneration and neovascularisation in cases of major bone loss is a challenge in maxillofacial surgery. The hypothesis of the present study is that the addition of resorbable bioactive ceramic Silica Calcium Phosphate Cement (SCPC) to Declluraized Muscle Scaffold (DSM) can expedite bone formation and maturation. Two surgical defect models were created in 18 nude transgenic mice. Group 1(n = 6), with a 2-mm decortication calvarial defect, was treated with a DSM/SCPC sheet over the corticated bone as an onlay then seeded with human Mesenchymal Stromal Cells hMSC in situ. In Group 2 (n = 6), a critical size (4 mm) calvarial defect was made and grafted with DSM/SCPC/in situ human bone marrow stromal cells (hMSCs). The control groups included Group 3 (n = 3) animals, with a 2-mm decortication defect treated with an onlay DSM sheet, and Group 4 (n = 3) animals, treated with critical size defect grafted with plain DSM. After 8 weeks, bone regeneration in various groups was evaluated using histology, immunohistochemistry and histomorphometry. New bone formation and maturation was superior in groups treated with DSM/SCPC/hMSC. The DMS/SCPC scaffold has the ability to augment and induce bone regeneration and neovascularisation in cases of major bone resorption and critical size defects.

Flavonoids from the peels of Citrus unshiu Markov. and their inhibitory effects on RANKL-induced osteoclastogenesis through the downregulation of c-Fos signaling in vitro.

Phytochemical investigation of Citrus unshiu peels led to the isolation of eight new flavonols (7-9, 11-15) and sixteen known compounds (1-6, 10, 16-24). Their structures were elucidated using spectroscopic analysis (1D, 2D NMR, and HR-MS). Besides, all isolated compounds (1-24) were evaluated for their inhibitory effects on receptor activator of RANKL-induced osteoclastogenesis in BMMs. Among them, dimethylmikanin (1), quercetogetin (2), 3,3',4',5,7,8-hexamethoxyflavone (3), 3-methoxynobiletin (4) showed a significant inhibitory effect on RANKL-induced osteoclast differentiation at a concentration of 10 µM. Moreover, 3-methoxynobiletin (4) suppressed RANKL-induced osteoclastogenesis by decreasing the number of osteoclasts and osteoclast actin-ring formation in a dose-dependent manner without causing any cytotoxic effects on BMMs. At the molecular level, 3-methoxynobiletin (4) inhibited RANKL-induced c-Fos expression and subsequently NFATc1 activation, as well as the expression of osteoclastogenesis-related marker genes c-Src and CtsK. These findings suggested that 3-methoxynobiletin (4) attenuated osteoclast differentiation by inhibiting RANKL-mediated c-Fos signaling and that it may have therapeutic potential for treating or preventing bone resorption-related diseases, such as osteoporosis.

Assessment of human ovarian follicular fluid derived mesenchymal stem cells in chitosan/PCL/Zn scaffold for bone tissue regeneration.

Bone tissue engineering compasses the use of mesenchymal stem cells (MSCs) along with engineered biomaterial construct to augment bone regeneration. Till now, MSCs were isolated from various sources and used in cellular constructs. For the first time, in this study, MSCs were isolated from human Ovarian Follicular Fluid (OFF) and characterized by CD 44+ and CD 105+ markers via confocal microscopy and flow cytometry. Additionally, MSCs stemness, proliferation and colony-forming unit ability, multi-lineage differentiation potential were also studied. To test its suitability for bone tissue engineering applications, we grew the MSCs with the conditioned medium obtained from biocomposite scaffold by fusing a natural polymer, Chitosan (CS) and a synthetic polymer, Polycaprolactone (PCL) and the scaffold were coated with Zinc divalent ions to impart osteogenic properties. The physico-chemical characterization of scaffold, such as FTIR, XRD, and SEM studies was carried out. The biological characterization showed that the scaffolds were compatible with MSCs and promoted osteoblast differentiation which was confirmed at both cellular and molecular levels. The cellular construct increased calcium deposition, analyzed by alizarin red staining and ALP activity at cellular level. At the molecular level, the osteoblast markers expression such as Runx2 and type 1 collagen mRNAs, and osteonectin (ON) and osteocalcin (OC) secretory proteins were increased in the presence of scaffold. Overall, the current study recommends that MSCs can be easily obtained from human waste OFF, and grown in standard in vitro conditions. Successful growth of such MSCs with CS/PCL/Zn scaffold opens new avenues in utilizing the cell source for bone tissue engineering.

A critical assessment of the potential of pharmacological modulation of aldehyde dehydrogenases to treat the diseases of bone loss.

Chronic alcoholism (CA) decreases bone mass and increases the risk of hip fracture. Alcohol and its main metabolite, acetaldehyde impairs osteoblastogenesis by increasing oxidative stress. Aldehyde dehydrogenase (ALDH) is the rate-limiting enzyme in clearing acetaldehyde from the body. The clinical relevance of ALDH in skeletal function has been established by the discovery of single nucleotide polymorphism, SNP (rs671) in the ALDH2 gene giving rise to an inactive form of the enzyme (ALDH2*2) that causes increased serum acetaldehyde and osteoporosis in the affected individuals. Subsequent mouse genetics studies have replicated human phenotype in mice and confirmed the non-redundant role of ALDH2 in bone homeostasis. The activity of ALDH2 is amenable to pharmacological modulation. ALDH2 inhibition by disulfiram (DSF) and activation by alda-1 cause reduction and induction of bone formation, respectively. DSF also inhibits peak bone mass accrual in growing rats. On the other hand, DSF showed an anti-osteoclastogenic effect and protected mice from alcohol-induced osteopenia by inhibiting ALDH1a1 in bone marrow monocytes. Besides DSF, there are several classes of ALDH inhibitors with disparate skeletal effects. Alda-1, the ALDH2 activator induced osteoblast differentiation by increasing bone morphogenic protein 2 (BMP2) expression via ALDH2 activation. Alda-1 also restored ovariectomy-induced bone loss. The scope of structure-activity based studies with ALDH2 and the alda-1-like molecule could lead to the discovery of novel osteoanabolic molecules. This review will critically discuss the molecular mechanism of the ethanol and its principal metabolite, acetaldehyde in the context of ALDH2 in bone cells, and skeletal homeostasis.

Melatonin has a stimulatory effect on osteoblasts by upregulating COL-I and OPN expression/secretion / Melatonina tem efeito estimulador em osteoblastos, pela regulação positiva da expressão/secreção de COL-I e OPN

ABSTRACT Melatonin (MLT) is a potential signaling molecule in the homeostasis of bone metabolism and may be an important mediator of bone formation and stimulation. The aim of this in vitro study was to evaluate the effect of MLT on the viability, mRNA/protein expression and mineralization of pre-osteoblastic cells. The concentrations 5, 2.5, 1, 0.1 and 0.01 mM MLT were tested on pre-osteoblastic cells (MC3T3) compared to control (no MLT), evaluating proliferation and cell viability (C50), gene expression (RT-PCR) and secretion (ELISA) of COL-I and OPN at 24h, 48h and 72h, and the formation of mineral nodules (alizarin red and fast red) after 10 days of treatment. MLT at 5 and 2.5 mM proved to be cytotoxic (C50), so only 0.01, 0.1 and 1 mM were used for the subsequent analyses. OPN mRNA expression increased with MLT at 0.1 mM - 1 mM, which was followed by increased secretion of OPN both at 24h and 72h compared to the remaining groups (p <0.05). COL-I mRNA and COL-1 secretion followed the same pattern as OPN at 0.1 mM MLT at 72h of treatment (p <0.05). Regarding mineralization, all MLT doses (except 1mM) caused an increase (p <0.05) in the formation of mineral nodules compared to the control. Melatonin at 0.01mM - 1mM had a stimulatory effect on osteoblasts by upregulating COL-I and OPN expression/ secretion and mineralization, thereby fostering osteogenesis.

RESUMO A melatonina (MLT) é uma molécula potencial de sinalização na homeostase do metabolismo ósseo e pode ser um importante mediador da formação e estimulação óssea. O objetivo deste estudo in vitro foi avaliar o efeito da MLT na viabilidade, na expressão do mRNA da proteína e mineralização de células préosteoblásticas. As concentrações de MLT 5, 2,5, 1, 0,1 e 0,01 mM foram testadas em células pré-osteoblásticas da linhagem MC3T3 em comparação ao controle (sem MLT), avaliando a proliferação e a viabilidade celular (C50), expressão gênica (rtPCR) e secreção (Elisa) de Colágeno tipo 1 (COL-I) e osteopontina (OPN) às 24, 48 e 72 horas, além da formação de nódulos minerais por meio do teste vermelho de Alizarina fast red após 10 dias de tratamento. MLT a 5 e 2,5 mM provou ser tóxico (C50). Portanto, as concentrações de 0,01, 0,1 e 1 mM foram utilizadas para as análises subsequentes. A expressão do mRNA da OPN aumentou com MLT a 0,1 mM-1mM, seguida pela secreção aumentada de OPN às 24 e 72 horas em comparação aos demais grupos (p<0,05). O mRNA de COL-I e a secreção de COL-I seguiram o mesmo padrão do OPN a 0,1 mM de MLT em 72 horas de tratamento (p<0,05). Em relação à mineralização, todas as doses de MLT (exceto 1mM) causaram aumento (p<0,05) na formação de nódulos minerais em comparação ao controle. A MLT na concentração entre 0,01mM a 1 mM teve um efeito estimulador sobre os osteoblastos, ao regular positivamente a expressão e secreção de COL-I e OPN, além da mineralização, favorecendo a osteogênese.

Osteogenic inducer sustained-release system promotes the adhesion, proliferation, and differentiation of osteoblasts on titanium surface.

OBJECTIVE: Biomaterial can be locally applied to promote the osseointegration of dental implants. This study aimed to fabricate an osteogenic inducer (OI) sustained-release system and to evaluate its effects on the adhesion, proliferation, and differentiation of osteoblasts on titanium surfaces. METHODS: First of all, different contents of OI solution were added to the poly (lactic-co-glycolic acid) (PLGA) gel individually to investigate the best physical properties and drug-release rate. Moreover, osteoblasts were isolated from the calvaria of two-month-old New Zealand rabbits through sequential enzymatic digestion. Osteoblasts were seeded onto the surface of Ti disks (control group), Ti coated with PLGA gel (PLGA group), and Ti coated with the OI sustained-release system (PLGA+OI group). Cell adhesion was observed by scanning electron microscopy. Cell proliferation was analyzed by cell counting kit-8. Cell differentiation was tested by alizarin red staining, alkaline phosphatase (ALP) activity and osteogenic-related gene expression. RESULTS: The OI sustained-release system contained 15% OI solution had appropriate physical properties and drug-release rate. The osteoblasts in the PLGA+OI group were in a typical spindle shape with a considerable number indicating the promotion of adhesion and proliferation. The expression of early and late stage osteoblast differentiation genes in the PLGA+OI group were significantly higher than that of the control group and PLGA group at each time point. The PLGA group showed accelerated adhesion and differentiation but reduced proliferation compared with the control. CONCLUSION: The OI sustained-release system promotes the adhesion, proliferation, and differentiation of osteoblasts on titanium surfaces. This system is a cost-effective osteoconductive biomaterial that might be promising for use in dental implantation.

Biocompatibility assessment of sub-5 nm silica-coated superparamagnetic iron oxide nanoparticles in human stem cells and in mice for potential application in nanomedicine.

Ultrasmall superparamagnetic iron oxide nanoparticles with a size <5 nm are emerging nanomaterials for their excellent biocompatibility, chemical stability, and tunable surface modifications. The applications explored include dual-modal or multi-modal imaging, drug delivery, theranostics and, more recently, magnetic resonance angiography. Good biocompatibility and biosafety are regarded as the preliminary requirements for their biomedical applications and further exploration in this field is still required. We previously synthesized and characterized ultrafine (average core size of 3 nm) silica-coated superparamagnetic iron oxide fluorescent nanoparticles, named sub-5 SIO-Fl, uniform in size, shape, chemical properties and composition. The cellular uptake and in vitro biocompatibility of the as-synthesized nanoparticles were demonstrated in a human colon cancer cellular model. Here, we investigated the biocompatibility of sub-5 SIO-Fl nanoparticles in human Amniotic Mesenchymal Stromal/Stem Cells (hAMSCs). Kinetic analysis of cellular uptake showed a quick nanoparticle internalization in the first hour, increasing over time and after long exposure (48 h), the uptake rate gradually slowed down. We demonstrated that after internalization, sub-5 SIO-Fl nanoparticles neither affect hAMSC growth, viability, morphology, cytoskeletal organization, cell cycle progression, immunophenotype, and the expression of pro-angiogenic and immunoregulatory paracrine factors nor the osteogenic and myogenic differentiation markers. Furthermore, sub-5 SIO-Fl nanoparticles were intravenously injected into mice to investigate the in vivo biodistribution and toxicity profile for a time period of 7 weeks. Our findings showed an immediate transient accumulation of nanoparticles in the kidney, followed by the liver and lungs, where iron contents increased over a 7-week period. Histopathology, hematology, serum pro-inflammatory response, body weight and mortality studies demonstrated a short- and long-term biocompatibility and biosafety profile with no apparent acute and chronic toxicity caused by these nanoparticles in mice. Overall, these results suggest the feasibility of using sub-5 SIO-Fl nanoparticles as a promising agent for stem cell magnetic targeting as well as for diagnostic and therapeutic applications in oncology.

In-vivo assessment of minerals substituted hydroxyapatite / poly sorbitol sebacate glutamate (PSSG) composite coating on titanium metal implant for orthopedic implantation.

Currently, bio-mimetic material synthetic processes are involved in bone implant design which is closely related to natural bone. In this work, Zinc, Cerium and Selenium substituted hydroxyapatite/ Poly (sorbitol sebacate glutamate) (Zn, Ce, Se-HAP/PSSG, M-HAP/PSSG) composite was prepared by sol-gel method as a bio-mimetic materials for bone implantation. The physiochemical characterizations of M-HAP/PSSG was analyzed by Fourier transform infra red (FT-IR), X-ray diffraction (XRD), Scanning electron microscopy (SEM) equipped with energy dispersive X-ray analysis (EDX) and High resolution transmission electron microscopy (HRTEM). Then, the prepared M-HAP/PSSG composite was compared with HAP/PSSG, Zn-HAP/PSSG, Ce-HAP/PSSG and Se-HAP/PSSG composites in order to evaluate the influence of single minerals on HAP matrix. Then the coating ability of the final better M-HAP/PSSG composite on surface treated titanium (Ti) was investigated to evaluate the perfection of implant material. The higher micro-hardness was observed on M-HAP/PSSG composite coated Ti (305.92 ±â€¯20.42) due to the presence of multi-minerals as well as the co-polymer PSSG when compared with M-HAP coated Ti plate (273.0 ±â€¯15.75). The bio-compatibility and osteogenic activity evaluation of all prepared composite on human osteoblasts MG-63 cells shows that the better cell attachment, proliferation and differentiation was observed by M-HAP/PSSG bio-composites when compared with other composites. Histological staining and X-ray photographs of in-vivo rat model confirms that the formation of new tibial bone when the defected rat was treated with M-HAP/PSSG composite coated Ti implant. In conclusion, the bio-composite M-HAP/PSSG is better scaffold for coating on the surface of Ti implant for orthopedic implantation.

Safety and Efficacy Assessment of Isoflavones from Pueraria (Kudzu) Flower Extract in Ovariectomised Mice: A Comparison with Soy Isoflavones.

Numerous Foods with Function Claims that contain the extract of Pueraria flower (kudzu) isoflavones (PFI) are available in the Japanese market. These are labelled with function claims of reducing visceral fat. However, these foods have not undergone proper safety assessment such as the evaluation of their oestrogenic activity and effects on drug-metabolising enzymes (cytochrome P-450: CYP) in the liver. This study evaluated the estrogenic effect and the hepatic CYP activity and mRNA expression in normal female mice as a safety assessment of PFI (Experiment 1). In addition, the bone mineral density and visceral fat weight in ovariectomised mice (OVX) compared to soy isoflavones (SI) was evaluated to assess the efficacy of PFI (Experiment 2). OVX control fed a control diet, OVX fed a PFI diet (the recommended human intake of PFI), OVX fed a PFI20 diet (20- times the recommended PFI), OVX fed an SI diet (the recommended human intake of SI), and OVX fed an SI20 diet (20 -times the recommended intake of SI) for 28 days in Experiment 2. Body, liver, and visceral fat weights were not affected by the PFI, PFI20, SI, or SI20 diets. The hepatic CYP1A and CYP3A activities were elevated by the SI20 treatment. Ovariectomy-induced bone loss was inhibited by the SI20 treatment, but not by the PFI20 treatment. These results suggest that (1) PFI intake in human doses had no oestrogenic properties and did not affect CYP activity in the liver; (2) there was no evidence that PFI affects the amount of visceral fat in OVX mice.

Engineering a multifunctional 3D-printed PLA-collagen-minocycline-nanoHydroxyapatite scaffold with combined antimicrobial and osteogenic effects for bone regeneration.

3D-printing and additive manufacturing can be powerful techniques to design customized structures and produce synthetic bone grafts with multifunctional effects suitable for bone repair. In our work we aimed the development of novel multifunctionalized 3D printed poly(lactic acid) (PLA) scaffolds with bioinspired surface coatings able to reduce bacterial biofilm formation while favoring human bone marrow-derived mesenchymal stem cells (hMSCs) activity. For that purpose, 3D printing was used to prepare PLA scaffolds that were further multifunctionalized with collagen (Col), minocycline (MH) and bioinspired citrate- hydroxyapatite nanoparticles (cHA). PLA-Col-MH-cHA scaffolds provide a closer structural support approximation to native bone architecture with uniform macroporous, adequate wettability and an excellent compressive strength. The addition of MH resulted in an adequate antibiotic release profile that by being compatible with local drug delivery therapy was translated into antibacterial activities against Staphylococcus aureus, a main pathogen associated to bone-related infections. Subsequently, the hMSCs response to these scaffolds revealed that the incorporation of cHA significantly stimulated the adhesion, proliferation and osteogenesis-related gene expression (RUNX2, OCN and OPN) of hMSCs. Furthermore, the association of a bioinspired material (cHA) with the antibiotic MH resulted in a combined effect of an enhanced osteogenic activity. These findings, together with the antibiofilm activity depicted strengthen the appropriateness of this 3D-printed PLA-Col-MH-cHA scaffold for future use in bone repair. By targeting bone repair while mitigating the typical infections associated to bone implants, our 3D scaffolds deliver an integrated strategy with the combined effects further envisaging an increase in the success rate of bone-implanted devices.

Application of Hydroxycholesterols for Alveolar Cleft Osteoplasty in a Rodent Model.

BACKGROUND: Bone morphogenetic proteins (BMPs) have played a central role in the regenerative therapies for bone reconstruction, including alveolar cleft and craniofacial surgery. However, the high cost and significant adverse effect of BMPs limit their broad application. Hydroxycholesterols, naturally occurring products of cholesterol oxidation, are a promising alternative to BMPs. The authors studied the osteogenic capability of hydroxycholesterols on human mesenchymal stem cells and the impact of hydroxycholesterols on a rodent alveolar cleft model. METHODS: Human mesenchymal stem cells were treated with control medium or osteogenic medium with or without hydroxycholesterols. Evaluation of cellular osteogenic activity was performed. A critical-size alveolar cleft was created and one of the following treatment options was assigned randomly to each defect: collagen sponge incorporated with hydroxycholesterols, BMP-2, or no treatment. Bone regeneration was assessed by means of radiologic and histologic analyses and local inflammation in the cleft evaluated. Moreover, the role of the hedgehog signaling pathway in hydroxycholesterol-mediated osteogenesis was examined. RESULTS: All cellular osteogenic activities were significantly increased on human mesenchymal stem cells treated with hydroxycholesterols relative to others. The alveolar cleft treated with collagen sponge with hydroxycholesterols and BMP-2 demonstrated robust bone regeneration. The hydroxycholesterol group revealed histologically complete bridging of the alveolar defect with architecturally mature new bone. The inflammatory responses were less in the hydroxycholesterol group compared with the BMP-2 group. Induction of hydroxycholesterol-mediated in vitro osteogenesis and in vivo bone regeneration were attenuated by hedgehog signaling inhibitor, implicating involvement of the hedgehog signaling pathway. CONCLUSION: Hydroxycholesterols may represent a viable alternative to BMP-2 in bone tissue engineering for alveolar cleft.

A bio-inspired, one-step but versatile coating onto various substrates with strong antibacterial and enhanced osteogenesis.

It is of great interest to prepare osteogenic and antibacterial coatings for successful implants. Current coating techniques suffer from being time-consuming, substrate material or shape dependence, expensive equipment, environmental pollution, low stability, processes that are difficult to control, etc. Herein, inspired by mussels, we report a one-step and versatile method to fabricate a dual functional coating. The coating is finished in minutes independently of materials or dimensions of substrates. Thus, our coatings exhibit strong antibacterial ability against both Gram-positive bacteria S. aureus, and Gram-negative bacteria E. coli, support the proliferation of dental pulp stem cells (DPSCs), and are powerful for inducing osteogenic differentiation. The universality, facility, rapidness, and mildness of our coating process, which is also environmentally-friendly and cost-effective, points towards potential applications in bone or dental implants.

Improved In Vitro Test Procedure for Full Assessment of the Cytocompatibility of Degradable Magnesium Based on ISO 10993-5/-12.

Magnesium (Mg)-based biomaterials are promising candidates for bone and tissue regeneration. Alloying and surface modifications provide effective strategies for optimizing and tailoring their degradation kinetics. Nevertheless, biocompatibility analyses of Mg-based materials are challenging due to its special degradation mechanism with continuous hydrogen release. In this context, the hydrogen release and the related (micro-) milieu conditions pretend to strictly follow in vitro standards based on ISO 10993-5/-12. Thus, special adaptions for the testing of Mg materials are necessary, which have been described in a previous study from our group. Based on these adaptions, further developments of a test procedure allowing rapid and effective in vitro cytocompatibility analyses of Mg-based materials based on ISO 10993-5/-12 are necessary. The following study introduces a new two-step test scheme for rapid and effective testing of Mg. Specimens with different surface characteristics were produced by means of plasma electrolytic oxidation (PEO) using silicate-based and phosphate-based electrolytes. The test samples were evaluated for corrosion behavior, cytocompatibility and their mechanical and osteogenic properties. Thereby, two PEO ceramics could be identified for further in vivo evaluations.

Complete Assessment of Multilineage Differentiation Potential of Human Skeletal Muscle-Derived Mesenchymal Stem/Stromal Cells.

The minimal criteria for mesenchymal stem/stromal cell (MSC) identification set by the International Society for Cellular Therapy include plastic adherence, presence and absence of a set of surface antigens and in vitro multilineage differentiation. This differentiation is assessed through stimulation of MSCs with defined combination and concentration of growth factors towards specific lineages and histological confirmation of the presence of differentiated cells. Here we provide protocols for multilineage differentiation, namely, osteogenesis, adipogenesis, chondrogenesis and myogenesis. We also provide their respective histological analyses.

Assessment of calcium sulfate hemihydrate-Tricalcium silicate composite for bone healing in a rabbit femoral condyle model.

Calcium sulfate or plaster of Paris (POP) is considered as a bone cement with a fast degradation rate, which frequently makes it resorb before the bone defect area is completely filled by new bone. The incorporation of tricalcium silicate (C3S) into POP cement has been proven as a feasible approach to reduce the in vitro degradation rate and improve the in vitro bioactivity of the material. However, the in vivo performance of the POP/C3S composite cement is still unclear. Therefore, the aim of the present study is to assess the biodegradability and osteogenesis of POP/C3S composite cement in comparison with those of POP bone cement. To carry out the in vivo evaluation, POP and POP/C3S cements were implanted into a femoral condyle defect model in rabbits (5 mm diameter × 10 mm length) for 4, 8, and 12 weeks duration. The area of the remaining cement and new bone regeneration in bone defect were investigated and quantitatively measured using radiography, micro-computed tomography, and histological staining. For both cements, no sign of inflammation was observed. POP cement was completely degraded at the 8th week of post-implantation. By contrast, only approximately 50% by volume of POP/C3S composite cement degraded at the 12th week, which allowed a long-term framework for new bone formation. The osteogenic ability of POP/C3S composite cement was significantly superior to that of POP as indicated by the higher mineralization rate and maturity of the newly formed bone around the composite cement. In summary, our findings demonstrated that the in vivo degradation behaviors and osteogenic ability of POP cement could be improved by incorporating C3S in vivo, suggesting that POP/C3S composite cement has potential as a biodegradable cement for bone repair.

Cytocompatibility assessment of Ti-Zr-Pd-Si-(Nb) alloys with low Young's modulus, increased hardness, and enhanced osteoblast differentiation for biomedical applications.

Ti-based alloys have increased importance for biomedical applications due to their excellent properties. In particular, the two recently developed TiZrPdSi(Nb) alloys, with a predominant ß-Ti phase microstructure, have good mechanical properties, such as a relatively low Young's modulus and high hardness. In the present work, the cytocompatibility of these alloys was assessed using human osteoblast-like Saos-2 cells. Cells grown on the alloys showed larger spreading areas (more than twice) and higher vinculin content (nearly 40% increment) when compared with cells grown on glass control surfaces, indicating a better cell adhesion. Moreover, cell proliferation was 18% higher for cells growing on both alloys than for cells growing on glass and polystyrene control surfaces. Osteogenic differentiation was evaluated by quantifying the expression of four osteogenic genes (osteonectin, osteocalcin, osteopontin, and bone sialoprotein), the presence of three osteogenic proteins (alkaline phosphatase, collagen I, and osteocalcin) and the activity of alkaline phosphatase at different time-points. The results demonstrated that TiZrPdSi and TiZrPdSiNb alloys enhance osteoblast differentiation, and that cells grown on TiZrPdSiNb alloy present higher levels of some late osteogenic markers during the first week in culture. These results suggest that the TiZrPdSi(Nb) alloys can be considered as excellent candidates for orthopaedical uses. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 834-842, 2018.

Isolation and prolonged expansion of oral mesenchymal stem cells under clinical-grade, GMP-compliant conditions differentially affects "stemness" properties.

BACKGROUND: Development of clinical-grade cell preparations is central to meeting the regulatory requirements for cellular therapies under good manufacturing practice-compliant (cGMP) conditions. Since addition of animal serum in culture media may compromise safe and efficient expansion of mesenchymal stem cells (MSCs) for clinical use, this study aimed to investigate the potential of two serum/xeno-free, cGMP culture systems to maintain long-term "stemness" of oral MSCs (dental pulp stem cells (DPSCs) and alveolar bone marrow MSCs (aBMMSCs)), compared to conventional serum-based expansion. METHODS: DPSC and aBMMSC cultures (n = 6/cell type) were established from pulp and alveolar osseous biopsies respectively. Three culture systems were used: StemPro_MSC/SFM_XenoFree (Life Technologies); StemMacs_MSC/XF (Miltenyi Biotek); and α-MEM (Life Technologies) with 15% fetal bovine serum. Growth (population doublings (PDs)), immunophenotypic (flow cytometric analysis of MSC markers) and senescence (ß-galactosidase (SA-ß-gal) activity; telomere length) characteristics were determined during prolonged expansion. Gene expression patterns of osteogenic (ALP, BMP-2), adipogenic (LPL, PPAR-γ) and chondrogenic (ACAN, SOX-9) markers and maintenance of multilineage differentiation potential were determined by real-time PCR. RESULTS: Similar isolation efficiency and stable growth dynamics up to passage 10 were observed for DPSCs under all expansion conditions. aBMMSCs showed lower cumulative PDs compared to DPSCs, and when StemMacs was used substantial delays in cell proliferation were noted after passages 6-7. Serum/xeno-free expansion produced cultures with homogeneous spindle-shaped phenotypes, while serum-based expansion preserved differential heterogeneous characteristics of each MSC population. Prolonged expansion of both MSC types but in particular the serum/xeno-free-expanded aBMMSCs was associated with downregulation of CD146, CD105, Stro-1, SSEA-1 and SSEA-4, but not CD90, CD73 and CD49f, in parallel with an increase of SA-gal-positive cells, cell size and granularity and a decrease in telomere length. Expansion under both serum-free systems resulted in "osteogenic pre-disposition", evidenced by upregulation of osteogenic markers and elimination of chondrogenic and adipogenic markers, while serum-based expansion produced only minor changes. DPSCs retained a diminishing (CCM, StemPro) or increasing (StemMacs) mineralization potential with passaging, while aBMMSCs lost this potential after passages 6-7 under all expansion conditions. CONCLUSIONS: These findings indicate there is still a vacant role for development of qualified protocols for clinical-grade expansion of oral MSCs; a key milestone achievement for translation of research from the bench to clinics.

Beta-tricalcium phosphate for orthopedic reconstructions as an alternative to autogenous bone graft.

Autogenous bone graft (autograft) remains the gold standard in the treatment of many orthopedic problems. However, graft harvest can lead to perioperative morbidity and increased cost. We tested the hypothesis that an osteoconductive matrix, beta-tricalcium phosphate (ß-TCP), would be a safe and effective alternative to autograft alone. Beta-tricalcium phosphate (ß-TCP) is considered as one of the most promising biomaterials for bone reconstruction. This study analyzes the outcomes of patients who received ß-TCP as bone substitutes in orthopedic surgery. METHODS: A total of 50 patients were enrolled in a controlled, non-inferiority clinical trial to compare the safety and efficacy of ß-TCP (25 patients) with those of autograft (25 patients) in indications requiring usually autograft. These 50 patients were categorized according to the etiology and morphology of the 54 bone defects resulting from elective surgical procedures, such as 34 open-wedge high tibial osteotomies, and 20 osteonecrosis treatments with core decompression. Radiographic (healing process with or without integration of ß-TCP), clinical (no other surgical procedure), functional outcomes and safety (with or without complications) were assessed through fifty-two weeks postoperatively. RESULTS: With regard to the primary endpoint (radiographic evolution), the fusion rate of the 34 open-wedge osteotomies was 100% (17 among 17) for patients in the group with ß-TCP compared with 94% (16 among 17) for patients in the autograft group. For the 20 cavitary defects (osteonecrosis), the radiographic union rates, as determined by the presence of osseous bridging, were 100% for patients in the group with ß-TCP and 100% for those in the autograft group. Clinically at one year, all quality-of-life and functional outcome data supported non-inferiority of ß-TCP compared with autograft, and patients in the ß-TCP group were found to have less pain and an improved safety profile. CONCLUSIONS: Treatment with ß-TCP resulted in comparable fusion rates, less pain and fewer side effects as compared with treatment with autograft. This study established clinical parameters where the ß-TCP alone can successfully support the osteogenic process.