Construct a Magnetic Pt/Ru Alloy Peroxidase Mimic As a Reusable and Cost-Effective "Signal-Off" Sensing Platform for Sensitive and Wide-Linear-Range Assay.

"Signal-off" nanozyme sensing platforms are usually employed to detect analytes (e.g., ascorbic acid (AA) and alkaline phosphatase (ALP)), which are mostly based on oxidase (OXD) nanozymes. However, their drawbacks, like dissolved oxygen-dependent catalysis capability, relatively low enzyme activity, limited amount, and kind, may not favor sensing platforms' optimization. Meanwhile, with the need for sustainable development, a reusable "signal-off" sensing platform is essential for cutting down the cost of the assay, but it is rarely developed in previous studies. Magnetic peroxidase (POD) nanozymes potentially make up the deficiencies and become reusable and better "signal-off" sensing platforms. As a proof of concept, we first construct Fe3O4@polydopamine-supported Pt/Ru alloy nanoparticles (IOP@Pt/Ru) without stabilizers. IOP@Pt/Ru shows high POD activity with Vmax of 83.24 × 10-8 M·s-1 for 3,3',5,5'-Tetramethylbenzidine (TMB) oxidation. Meanwhile, its oxidation rate for TMB is slower than the reduction of oxidized TMB by reducers, favorable for a more significant detection signal. On the other hand, IOP@Pt/Ru possesses great magnet-responsive capability, making itself be recycled and reused for at least 15-round catalysis. When applying IOP@Pt/Ru for AA (ALP) detection, it performs better detectable adaptability, with a linear range of 0.01-0.2 mM (0.1-100 U/L) and a limit of detection of 0.01 mM (0.05 U/L), superior to most of OXD nanozyme-based ALP sensing platform. Finally, IOP@Pt/Ru's reusable assay was demonstrated in real blood samples for ALP assay, which has never been explored in previous studies. Overall, this study develops a reusable "signal-off" nanozyme sensing platform with superior assay capabilities than traditional OXD nanozymes, paves a new way to optimize nanozyme-based "signal-off" sensing platforms, and provides an idea for constructing inexpensive and sustainable sensing platforms.

Kiwi (Actinidia deliciosa) juice as a natural inhibitor of the enzymatic activity of sugarcane juice, insights from experimental assessment and molecular docking analysis.

The present work evaluated kiwi juice addition alongside pasteurization (at 85 °C for 5 min) or microwave treatment (for 3 min) on the quality improvement of sugarcane juice. The juice was treated in the presence of kiwi juice (0-8%), and its physicochemical properties and microbial load were compared with raw juice. The study also highlighted the key enzymes causing sugarcane juice discoloration, peroxidase (POD) and polyphenol oxidase (PPO), by quantifying kiwi juice constituents using GC-MS and monitoring their effects by molecular docking. Kiwi addition considerably raised (p < 0.05) acidity, ascorbic acid (54.28%), and phenolic compounds (32%), and decreased the POD and PPO activity of raw cane juice. Pasteurization in the presence of kiwi, rather than microwave treatment, has significantly (p < 0.05) increased the phenolic compounds and reduced POD and PPO activities until barley was detected. Molecular docking revealed that heptacosane, oleic acid, and melezitose are the primary kiwi components responsible for enzyme inactivation.

A template-free assembly of Cu,N-codoped hollow carbon nanospheres as low-cost and highly efficient peroxidase nanozymes.

Developing carbon-based materials with high catalytic performance and sensitivity has significance in low-cost and highly efficient nanozymes. Herein, for the first time, Cu,N-codoped hollow carbon nanospheres (CuNHCNs) with highly active Cu-Nx sites were successfully assembled through a template-free strategy, in which Cu2+-poly(m-phenylenediamine) (Cu-PmPD) nanospheres were utilized as the source of Cu, N and C. Benefiting from the synergistic effect of the hollow spherical structure and optimized composition, the CuNHCN exhibits high affinity for 3,3',5,5'-tetramethylbenzidine and H2O2 with 0.0655 mM and 0.918 mM, respectively, which are superior to those of HRP and most metal-based nanozymes. Moreover, by employing glucose and ascorbic acid (AA) as biomolecule models, a CuNHCN-based colorimetric detection platform is developed. The CuNHCN exhibits superior peroxidase mimicking activity and sensitivity in detecting glucose and AA with a detection limit of 0.187 µM and 68.9 nM (S/N = 3), respectively. Also, the colorimetric detection based on the CuNHCN towards glucose and AA in human serum presents superior practicability and accuracy. The assay provides a new avenue for designing and fabricating low-cost peroxidase nanozymes with high performance in bioassays.

Abiotic stress elements in in vitro potato (Solanum tuberosum L.) exposed to air-based and liquid-based ultrasound: A comparative transcriptomic assessment.

Ultrasound (US) can modify the plant growth and development. Previous assessments of the transcriptome of in vitro potato (Solanum tuberosum L.) exposed to US transmitted through air (AB-US) or liquid (PE-US) revealed the up- or down-regulation of several stress-related differentially expressed genes (DEGs) related to abiotic stress. In a bid to better characterize stress-related elements over a four-week period, the transcriptome of AB-US was compared to that of PE-US. When comparing the controls of both treatments, DEGs related to hypoxia were not detected. Nevertheless, hypoxia-related DEGs were detected in the combination of liquid medium and ultrasonication. DEGs coding for chitinase, peroxidase, glutathione-S-transferase, transcription factors of ERF (ethylene responsive factor), DREB (dehydration-responsive element-binding), WRKY and MYB were also significantly highly expressed in PE-US, relative to AB-US. Up- and down-regulation of DEGs related to metabolic processes, and enzymes of the antioxidant system also confirm that PE-US is a more acute abiotic stress than AB-US. KEY MESSAGE: A transcriptomic analysis revealed that liquid-based ultrasonication was a stronger abiotic stressor than air-based ultrasonication. Of particular interest were the heat shock proteins and transcription factors in this comparison. Despite the ultrasound stress, explants survived and plantlets developed.

Immobilization of Low-Cost Alternative Vegetable Peroxidase (Raphanus sativus L. peroxidase): Choice of Support/Technique and Characterization.

In the present work the radish (Raphanus sativus L.) was used as the low-cost alternative source of peroxidase. The enzyme was immobilized in different supports: coconut fiber (CF), calcium alginate microspheres (CAMs) and silica SBA-15/albumin hybrid (HB). Physical adsorption (PA) and covalent binding (CB) as immobilization techniques were evaluated. Immobilized biocatalysts (IBs) obtained were physicochemical and morphologically characterized by SEM, FTIR and TGA. Also, optimum pH/temperature and operational stability were determined. For all supports, the immobilization by covalent binding provided the higher immobilization efficiencies-immobilization yield (IY%) of 89.99 ± 0.38% and 77.74 ± 0.42% for HB and CF, respectively. For CAMs the activity recovery (AR) was of 11.83 ± 0.68%. All IBs showed optimum pH at 6.0. Regarding optimum temperature of the biocatalysts, HB-CB and CAM-CB maintained the original optimum temperature of the free enzyme (40 °C). HB-CB showed higher operational stability, maintaining around 65% of the initial activity after four consecutive cycles. SEM, FTIR and TGA results suggest the enzyme presence on the IBs. Radish peroxidase immobilized on HB support by covalent binding is promising in future biotechnological applications.

GABA enzymatic assay kit.

We developed an enzymatic assay system enabling easy quantification of 4-aminobutyric acid (GABA). The reaction of GABA aminotransferase obtained from Streptomyces decoyicus NBRC 13977 was combined to those of the previously developed glutamate assay system using glutamate oxidase and peroxidase. The three-enzyme system allowing GABA-dependent dye formation due to the oxidative coupling between 4-aminoantipyrine and Trinder's reagent enabled accurate quantification of 0.2 - 150 mg/L GABA. A pretreatment mixture consisting of glutamate oxidase, ascorbate oxidase and catalase eliminating glutamate, ascorbate, and hydrogen peroxide, respectively, was also prepared to remove those inhibitory substances from samples. Thus, constructed assay kit was used to measure the GABA content in tomato samples. The results were almost the same as that obtained by the conventional method using liquid chromatography-tandem mass spectrometry. The kit will become a promising tool especially for the on-site measurement of GABA content in agricultural products.

Cantilever Functionalization Using Peroxidase Extract of Low Cost for Glyphosate Detection.

A cantilever nanobiosensor functionalized with vegetable source of peroxidase was developed as an innovative way for glyphosate herbicide detection over a wide concentration range (0.01 to 10 mg L-1) using atomic force microscopy (AFM) technique. The extract obtained from zucchini (Cucurbita pepo source of peroxidase), with high enzymatic activity and stability has been used as bio-recognition element to develop a nanobiosensor. The polarization-modulated reflection absorption infrared spectroscopy (PM-RAIRS) demonstrated the deposition of enzyme on cantilever surface using self-assembled monolayers (SAM) by the presence of the amide I and II bands. The detection mechanism of glyphosate was based on the changes in surface tension caused by the analyte adsorption, resulting in a conformational change in the enzyme structure. In this way, the results of nanobiosensor demonstrate the potential of the sensing device for detecting glyphosate with a detection limit of 0.028 mg L-1.

Efficient label-free chemiluminescent immunosensor based on dual functional cupric oxide nanorods as peroxidase mimics.

Dual-functional cupric oxide nanorods (CuONRs) as peroxidase mimics are proposed for the development of a flow-through, label-free chemiluminescent (CL) immunosensor. Forming the basis of this cost-efficient, label-free immunoassay, CuONRs, synthesized using a simple hydrothermal method, were deposited onto epoxy-activated standard glass slides, followed by immobilization of biotinylated capture antibodies through a streptavidin bridge. The CuONRs possess excellent catalytic activity, along with high stability as a solid support. Antigens could then be introduced to the sensing system, forming large immunocomplexes that prevent CL substrate access to the surface, thereby reducing the CL signal in a concentration dependent fashion. Using carcinoembryonic antigen (CEA) as a model analyte, the proposed label-free immunosensor was able to rapidly determine CEA with a wide linear range of 0.1-60ngmL-1 and a low detection limit of 0.05ngmL-1. This nanozyme-based immunosensor is simple, sensitive, cost-efficient, and has the potential to be a very promising platform for fast and efficient biosensing applications.

A facile low-cost enzymatic paper-based assay for the determination of urine creatinine.

Creatinine is one of many markers used to investigate kidney function. This paper describes a low-cost enzymatic paper-based analytical device (enz-PAD) for determining urine creatinine. The disposable dead volumes of creatinine enzyme reagents from an automatic analyser cassette were utilised. Whatman No. 3 paper was cut into long rectangular shapes (4×40 mm(2)) on which the enzyme reagents, R1 and R2, were adsorbed in two consecutive regions. The assay was performed by immersing test strips into urine samples contained in microwells to allow creatinine in the sample to react with immobilised active ingredients and, then, traverse via capillary action to the detection area where chromogen products accumulated. The method is based on hydrogen peroxide (H2O2) formation via creatinine conversion using creatininase, creatinase, and sarcosine oxidase. The liberated H2O2 reacts with 4-aminophenazone and 2,4,6-triiodo-3-hydroxybenzoic acid to form quinoneimine with a pink-red colour at the detection zone. The linear range of the creatinine assay was 2.5-25 mg dL(-1) (r(2)=0.983), and the detection limit was 2.0 mg dL(-1). The colorimetric enz-PAD for the creatinine assay was highly correlated with a conventional alkaline picrate method when real urine samples were evaluated (r(2)=0.977; n=40). This simple and nearly zero-cost paper-based device provides a novel alternative method for screening urinary creatinine and will be highly beneficial for developing countries.

A facile label-free colorimetric aptasensor for acetamiprid based on the peroxidase-like activity of hemin-functionalized reduced graphene oxide.

A facile aptasensor has been developed for the colorimetric detection of acetamiprid by using the hemin-functionalized reduced graphene oxide (hemin-rGO) composites. The as-prepared hemin-rGO composites possessed both the ability of rGO to physically adsorb the aptamers and the peroxidase-like activity of hemin that could catalyse 3,3,5,5-tetramethylbenzidine (TMB) in the presence of H2O2, to produce a solution with blue color. The well-dispersed hemin-rGO composites coagulated completely at the proper salt concentration; however, the coagulation of hemin-rGO was vanished when abundant aptamers were adsorbed on its surface because the attached negatively charged DNA backbone increased individual hemin-rGO electrostatic repulsion. In the detection scheme, acetamiprid with different concentrations was firstly incubated with the same amount of aptamer. The more acetamiprid in the tested solution, the less free aptamers were absorbed on the hemin-rGO surface, making the composites coagulate to a higher degree in the presence of the optimum NaCl concentration. As a consequence, the content of hemin-rGO in the supernatant was decreased after centrifugation, which catalysed oxidation of TMB in the presence of H2O2 to produce light blue color with a low absorbance. The color variation relavant to the acetamiprid concentration can be judged by the naked eyes and easily monitored by the inexpensive UV-vis spectrometer. Such designed aptasensor displayed a linear response for acetamiprid in the range from 100nM to 10µM with a detection limit of 40nM (S/N=3). This colorimetric aptasensing platform offers great advantages including the simple operation process, low-cost portable instrument, and user-friendly applications.

Biobleaching of industrial important dyes with peroxidase partially purified from garlic.

An acidic peroxidase was extracted from garlic (Allium sativum) and was partially purified threefold by ammonium sulphate precipitation, dialysis, and gel filtration chromatography using sephadex G-200. The specific activity of the enzyme increased from 4.89 U/mg after ammonium sulphate precipitation to 25.26 U/mg after gel filtration chromatography. The optimum temperature and pH of the enzyme were 50°C and 5.0, respectively. The Km and V max for H2O2 and o-dianisidine were 0.026 mM and 0.8 U/min, and 25 mM and 0.75 U/min, respectively. Peroxidase from garlic was effective in decolourizing Vat Yellow 2, Vat Orange 11, and Vat Black 27 better than Vat Green 9 dye. For all the parameters monitored, the decolourization was more effective at a pH range, temperature, H2O2 concentration, and enzyme concentration of 4.5-5.0, 50°C, 0.6 mM, and 0.20 U/mL, respectively. The observed properties of the enzyme together with its low cost of extraction (from local sources) show the potential of this enzyme for practical application in industrial wastewater treatment especially with hydrogen peroxide. These Vat dyes also exhibited potentials of acting as peroxidase inhibitors at alkaline pH range.

Five-year longitudinal assessment (2008 to 2012) of E-101 solution activity against clinical target and antimicrobial-resistant pathogens.

This study summarizes the topical E-101 solution susceptibility testing results for 760 Gram-positive and Gram-negative target pathogens collected from 75 U.S. sites between 2008 and 2012 and 103 ESKAPE pathogens. E-101 solution maintained potent activity against all bacterial species studied for each year tested, with MICs ranging from <0.008 to 0.25 µg porcine myeloperoxidase (pMPO)/ml. These results confirm that E-101 solution retains its potent broad-spectrum activity against U.S. clinical isolates and organisms with challenging resistance phenotypes.

Assessment of myeloperoxidase activity by the conversion of hydroethidine to 2-chloroethidium.

Oxidants derived from myeloperoxidase (MPO) contribute to inflammatory diseases. In vivo MPO activity is commonly assessed by the accumulation of 3-chlorotyrosine (3-Cl-Tyr), although 3-Cl-Tyr is formed at low yield and is subject to metabolism. Here we show that MPO activity can be assessed using hydroethidine (HE), a probe commonly employed for the detection of superoxide. Using LC/MS/MS, (1)H NMR, and two-dimensional NOESY, we identified 2-chloroethidium (2-Cl-E(+)) as a specific product when HE was exposed to hypochlorous acid (HOCl), chloramines, MPO/H2O2/chloride, and activated human neutrophils. The rate constant for HOCl-mediated conversion of HE to 2-Cl-E(+) was estimated to be 1.5 × 10(5) M(-1)s(-1). To investigate the utility of 2-Cl-E(+) to assess MPO activity in vivo, HE was injected into wild-type and MPO-deficient (Mpo(-/-)) mice with established peritonitis or localized arterial inflammation, and tissue levels of 2-Cl-E(+) and 3-Cl-Tyr were then determined by LC/MS/MS. In wild-type mice, 2-Cl-E(+) and 3-Cl-Tyr were detected readily in the peritonitis model, whereas in the arterial inflammation model 2-Cl-E(+) was present at comparatively lower concentrations (17 versus 0.3 pmol/mg of protein), and 3-Cl-Tyr could not be detected. Similar to the situation with 3-Cl-Tyr, tissue levels of 2-Cl-E(+) were decreased substantially in Mpo(-/-) mice, indicative of the specificity of the assay. In the arterial inflammation model, 2-Cl-E(+) was absent from non-inflamed arteries and blood, suggesting that HE oxidation occurred locally in the inflamed artery. Our data suggest that the conversion of exogenous HE to 2-Cl-E(+) may be a useful selective and sensitive marker for MPO activity in addition to 3-Cl-Tyr.

Multiplexed bioactive paper based on GO@SiO2@CeO2 nanosheets for a low-cost diagnostics platform.

In this paper, Graphene oxide@SiO2@CeO2 hybrid nanosheets (GSCs) have been successfully synthesized by the wet-chemical strategy. TEM, FITR and XPS were applied to characterize the morphology and composition of the nanosheets. The colorimetric assay of these nanosheets indicated that they possessed high intrinsic peroxidase activity, which should be ascribed to the combination of graphene oxide and CeO2. A fully integrated reagentless bioactive paper based on GSCs was fabricated, which were able to simultaneously detect glucose, lactate, uric acid and cholesterol. The results demonstrated that GSCs have great potential as an alternative to the commonly employed peroxidase in daily nursing and general physical examination.

Chitosan-guar gum-silver nanoparticles hybrid matrix with immobilized enzymes for fabrication of beta-glucan and glucose sensing photometric flow injection system.

Simple and fast photometric flow injection analysis system was developed for sensing of ß-1,3-glucan from medicinal mushroom Ganoderma lucidum during fermentation. For this purpose, the chitosan-guar gum-silver nanoparticle-beta glucanase (Ch-GG-AgNPs-ßG) beads and Ch-GG-AgNPs-GOD (glucose oxidase) beads were prepared. The bead packed mini-columns were then used to assemble a flow injection analysis (FIA) system for the detection of ß-(1→3)-d-glucan biomarker or glucose. This colorimetric flow system can detect glucose and glucan with detection limits as low as 50ngmL(-1) and 100ngmL(-1) (S/N=3), respectively. The analysis time of this FIA was approximately 40s, which is faster than the previously reported glucan sensors. The glucose and glucan calibration curves were obtained in the range of 0.25-1.25µgmL(-1) (R(2)=0.988) and 0.2-1.0µgmL(-1)(R(2)=0.979), respectively. The applicability of the nano-bio-composite FIA sensor system for spiked and real ß-(1→3)-d-glucan samples were tested, and the accuracy of the results were greater than 95%. Thus, the designed FIA provides a simple, interference free and rapid tool for monitoring glucose and ß-glucan content, which can be used for various food samples with a little modification.

Mechanistic characterization of a 2-thioxanthine myeloperoxidase inhibitor and selectivity assessment utilizing click chemistry--activity-based protein profiling.

Myeloperoxidase (MPO) is a heme peroxidase that catalyzes the production of hypochlorous acid. Despite a high level of interest in MPO as a therapeutic target, there have been limited reports about MPO inhibitors that are suitable for evaluating MPO in pharmacological studies. 2-Thioxanthine, 3-(2-ethoxypropyl)-2-thioxo-2,3-dihydro-1H-purin-6(9H)-one (A), has recently been reported to inhibit MPO by covalently modifying the heme prosthetic group. Here we report a detailed mechanistic characterization demonstrating that A possesses all the distinguishing features of a mechanism-based inactivator. A is a time-dependent MPO inhibitor and displays saturable inactivation kinetics consistent with a two-step mechanism of inactivation and a potency (k(inact)/K(I) ratio) of 8450 ± 780 M⁻¹ s⁻¹. MPO inactivation by A is dependent on MPO catalysis and is protected by substrate. A reduces MPO compound I to compound II with a second-order rate constant of (0.801 ± 0.056) × 106 M⁻¹ s⁻¹, and its irreversible inactivation of MPO occurs prior to release of the activated inhibitory species. Despite its relatively high selectivity against a broad panel of more than 100 individual targets, including enzymes, receptors, transporters, and ion channels, we demonstrate that A labels multiple other protein targets in the presence of MPO. By synthesizing an alkyne analogue of A and utilizing click chemistry-activity-based protein profiling, we present that the MPO-activated inhibitory species can diffuse away to covalently modify other proteins, as reflected by the relatively high partition ratio of A, which we determined to be 15.6. This study highlights critical methods that can guide the discovery and development of next-generation MPO inhibitors.

A novel xyloglucan film-based biosensor for toxicity assessment of ricin in castor seed meal.

Oil from the seed of the castor plant (Ricinus communis L.) is an important commodity for a number of industries, ranging from pharmaceuticals to renewable energy resources. However, the seed and subsequent seed meal contain ricin (RCA60), a potent cytotoxin, making it an unusable product for animal feed. In order to investigate the efficiency of reducing the toxicity of the seed meal, a biosensor is proposed by exploring the lectin-carbohydrate binding. A gold electrode was assembled with a film of Xyloglucan (XG) extracted from Hymenaea courbaril L. The analytical response to RCA60 was obtained using a polyclonal antibody against RCA60 conjugated to peroxidase. The current responses were generated by reaction with H2O2 and amplified with hydroquinone as chemical mediator. Voltammetric studies showed that the XG film was tightly bound to the gold electrode. This biosensor allows discriminate lectins in native and denatured forms. The limit of detection of native RCA60 was 2.1 µg mL(-1). This proposed biosensor showed to be a potential and accurate method for toxicity assessment of the ricin in castor seed meal by simple polysaccharide film-electrode strategy.

Application of fly ash adsorbed peroxidase for the removal of bisphenol A in batch process and continuous reactor: assessment of genotoxicity of its product.

In the present study peroxidase has been immobilized simply by adsorption on fly ash. On fly ash adsorbed nearly 1113 U of peroxidase activity per g. Comparative degradation of endocrine disrupter, bisphenol A has been performed by soluble and immobilized enzyme. Soluble and immobilized enzyme removed maximum bisphenol A in the presence of 0.3mM guaiacol, a redox mediator, 0.75 mM H(2)O(2) in sodium phosphate buffer, pH 7.0 at 40 °C. Degradation of bisphenol A in batch process was 61%, 100% and 100% at 20, 40 and 60 °C, respectively. Fly ash adsorbed peroxidase was more effective in the degradation of bisphenol A as compared to its free form. Immobilized enzyme catalyzed complete degradation of bisphenol A at 40 °C within 3.5h. The oxidative degradation and polymerization of bisphenol A was also evaluated in the continuous bed-reactors at different flow rates. The removal of this compound was maximum at a flow rate of 20 mL h(-1). HPLC analysis showed two clear peaks, one related to bisphenol A and other related to its degradation product, 4-isopropenylphenol. Plasmid nicking and comet assays demonstrated that the product, 4-isopropenylphenol was significantly nontoxic.

Determination of serum triglycerides using lipase, glycerol kinase, glycerol-3-phosphate oxidase and peroxidase co-immobilized onto alkylamine glass beads.

A method for determination of serum triglycerides (Tgs) using lipase, glycerol kinase, glycerol-3-phosphate oxidase and peroxidase co-immobilized onto alkylamine glass beads (pore diameter 55 nm) through glutaraldehyde coupling was developed and evaluated. The minimum detection limit of the method was 0.54 mM. The analytical recovery of added triolein in the serum was 97.55 +/- 1.5% (mean +/- S.D.). The mean value of serum Tgs, determined by the present method showed a good correlation (r = 0.984) with the Bayer's kit method, employing free enzymes. The within and between batch coefficients of variation (CV) were < 2.25% and < 1.35% respectively. No significant loss of activity was observed, when co-immobilized enzymes were reused for about 200 times and stored at 4 degrees C in distilled water. The cost of Tg determination for 200 serum samples was less, as compared with Bayer's kit method.

Oxidation of mitoxantrone by lactoperoxidase.

The lactoperoxidase (LPO) catalysed oxidation of mitoxantrone, an anthraquinone type anti-cancer drug, was studied spectrophotometrically under turnover and single turnover conditions with a stopped flow apparatus. With Compound I and Compound II, mitoxantrone formed binding complexes that were deactivated with increasing substrate concentration. The productive second-order rate constants for reduction were 3.6 x 10(6) and 2.2 x 10(4) M(-1) s(-1) for Compound I and Compound II, respectively. Under turnover conditions, Compound II was the steady-state intermediate, but with increasing H2O2, Compound II reacted with H2O2 to form the catalytically inactive intermediate Compound III. Nitrite prevented formation of Compound III by reducing Compound II to the native state. It also modulated the pathway of mitoxantrone oxidation by increasing the level of oxidised metabolites such as MH2(2+) and the novel metabolite MH. The biological implication of drug activation by LPO with nitrite is discussed.