DIGITAL FABRICATION OF COMPLETE DENTURES, COMPARED TO CONVENTIONAL METHODS, MAY OFFER A MORE COST-EFFECTIVE APPROACH WITH IMPROVED PATIENT OUTCOMES.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Digitally versus conventionally fabricated complete dentures: A systematic review on cost-efficiency analysis and patient-reported outcome measures (PROMs). Tew, In Meei, Suet Yeo Soo, and Edmond Ho Nang Pow.The Journal of Prosthetic Dentistry (2023). SOURCE OF FUNDING: No fund was received. TYPE OF STUDY/DESIGN: Systematic review.

CAD/CAM versus traditional complete dentures: A systematic review and meta-analysis of patient- and clinician-reported outcomes and costs.

STATEMENT OF PROBLEM: Computer-aided design and manufacturing (CAD/CAM) have been increasingly used to enhance the patient and clinician experiences with removable complete dentures (CDs). Yet, evidence from systematic reviews is lacking to validate the clinical significance of these digital prostheses. PURPOSE: The purpose of this systematic review was to compare CAD/CAM CDs with the traditional ones in terms of patient and clinician-reported outcomes, post-insertion adjustment visits and costs. MATERIALS AND METHODS: An electronic search of four databases [Medline (Ovid), Embase, Scopus and Cochrane CENTRAL; last update: May 2022] was performed to retrieve clinical studies comparing CAD/CAM and traditional CDs. Two independent reviewers screened the articles, extracted data (methods and outcomes) and assessed risk of bias of the included studies. The following outcomes underwent meta-analysis (random-effects model): overall patient and clinician satisfaction, oral health-related quality of life (OHRQoL), number of post-insertion adjustment visits, as well as laboratory and total costs. RESULTS: This review included 11 studies. Meta-analysis revealed that CAD/CAM CDs are comparable to the traditional CDs in terms of overall patient satisfaction and OHRQoL. Clinician-reported data depended on the manufacturing technique: whereas milled CDs performed better than traditional CDs in terms of clinician satisfaction and number of adjustments, 3D printed and traditional CDs were similar. Fabrication of CAD/CAM CDs required significantly less laboratory and overall costs than the traditional CDs. CONCLUSIONS: There is some evidence showing that CAD/CAM CDs are at least comparable to traditional CDs. Further well-designed randomized clinical trials are needed to evaluate the performance of specific CAD/CAM approaches for manufacturing CDs, however.

Do traditional techniques produce better conventional complete dentures than simplified techniques? A 10-year follow-up of a randomized clinical trial.

OBJECTIVES: The use of a simplified method (S) of fabricating complete dentures has been shown to be more cost-efficient than the traditional method (T), and there are no negative consequences that detract from the cost savings in the short term. However, it is not clear whether this remains constant over a decade. The objective of this study was to clarify patients' perspectives and determine any differences between the dentures fabricated with these two different techniques after a decade of use. MATERIAL AND METHODS: Edentate individuals participated in a randomized controlled clinical trial and completed a 6-month follow-up from 2001 to 2003 (T group n = 50; S group n = 54). For this 10-year follow-up, they were interviewed by telephone. The assessment included whether the denture was still in use or replaced, the condition of the dentures, patient satisfaction and oral health-related quality of life (OHRQoL). Between and within-group differences and the factors that cause deterioration of oral health-related quality of life (OHRQoL) were determined. RESULTS: Among 54 responders (25 T and 29 S), 14T and 21S kept the original dentures. Both groups were similar in ratings of satisfaction and OHRQoL (maxilla T: 80.0 S: 86.0, p = 0.36; mandibular; T: 66.1 S: 72.3, p = 0.48; OHRQoL T: 111.1 S: 108.5, p = 0.46). Irrespective of fabrication method, discomfort, chewing difficulty and esthetics were the factors that deteriorate OHRQoL (adjusted r = 0.76, p < 0.001). CONCLUSION: The results indicate that the simplified method remains more cost-efficient than the traditional method over a 10-year period. (IRB approval: A09-E71-12 B McGill University, trial registry: ClinicalTrial.org; NCT02289443).

Randomised clinical trial of patient satisfaction with traditional and simplified complete dentures.

To clinically evaluate the patient satisfaction and associated costs of dentures made using a simplified procedure that eliminates assembly on the articulator and dentures made with the conventional technique. Single-blind randomised clinical trial. Forty edentulous patients were randomly divided into 2 groups. One group received dentures made using the conventional method (CG), and the other using a simplified technique (SG) that omits the use of functional impressions (with modelling compound and ZOE impression paste) and an articulator to assemble the models. Overall patient satisfaction was assessed at 3 and 6 months by means of a Numerical Rating Scale (NRS). The comparisons were made using a repeated measures ANOVA (P = .05). No significant differences were found in terms of the satisfaction stated by the patients or the quality of the prosthesis evaluated by a professional among the dentures made using the traditional (n = 17) and simplified (n = 21) techniques. The rehabilitation of an edentulous patient with a simplified technique for the preparation of a total prosthesis is a feasible, more economical alternative and accepted by most patients.

Cost-effectiveness analysis of two impression methods for the fabrication of mandibular complete dentures.

OBJECTIVES: To compare the cost and to evaluate cost-effectiveness of fabricating mandibular complete dentures (CDs) using two different impression methods. METHODS: A crossover randomized controlled trial including 27 edentulous participants was performed. Mandibular CDs were fabricated using two different impression methods, as follows: (i) conventional method using a custom tray border moulded with impression compound and silicone and (ii) simplified method using a stock tray and alginate. Cost analysis was performed from a clinical practitioner's perspective. The total cost included labor cost, which was calculated using the time spent by dentists and technicians in fabricating CDs and their hourly wages, and the material costs, which were calculated using purchase prices. To evaluate cost-effectiveness, we used general patient satisfaction as an indicator of effectiveness and calculated the incremental cost effectiveness ratio (ICER). ICER represents the cost per one unit of effectiveness. RESULTS: The trial was completed by 24 participants. The total cost was 43,904 Japanese Yen (JPY) (330.91 EUR / 395.78 USD) for the conventional method and 39,792 JPY (299.93 EUR / 358.70 USD) for the simplified method, and this difference was statistically significant (p<0.001). The ICER showed a cost of 633 JPY (4.77 EUR / 5.70 USD) for every one point change in general patient satisfaction. CONCLUSIONS: The results indicated that the total cost of the conventional method was significantly higher than that of the simplified method (p<0.001). CLINICAL SIGNIFICANCE: The conventional impression method for fabricating mandibular CDs, which took additional 633 JPY (4.77 EUR / 5.70 USD) for improvement of general satisfaction, is supposed to be clinically meaningful1.

The relative patient costs and availability of dental services, materials and equipment in public oral care facilities in Tanzania.

BACKGROUND: Patient charges and availability of dental services influence utilization of dental services. There is little available information on the cost of dental services and availability of materials and equipment in public dental facilities in Africa. This study aimed to determine the relative cost and availability of dental services, materials and equipment in public oral care facilities in Tanzania. The local factors affecting availability were also studied. METHODS: A survey of all district and regional dental clinics in selected regions was conducted in 2014. A total of 28/30 facilities participated in the study. A structured interview was undertaken amongst practitioners and clinic managers within the facilities. Daily resources for consumption (DRC) were used for estimation of patients' relative cost. DRC are the quantified average financial resources required for an adult Tanzanian's overall consumption per day. RESULTS: Tooth extractions were found to cost four times the DRC whereas restorations were 9-10 times the DRC. Studied facilities provided tooth extractions (100%), scaling (86%), fillings (79%), root canal treatment (46%) and fabrication of removable partial dentures (32%). The ratio of tooth fillings to extractions in the facilities was 1:16. Less than 50% of the facilities had any of the investigated dental materials consistently available throughout the year, and just three facilities had all the investigated equipment functional and in use. CONCLUSIONS: Dental materials and equipment availability, skills of the practitioners and the cost of services all play major roles in provision and utilization of comprehensive oral care. These factors are likely to be interlinked and should be taken into consideration when studying any of the factors individually.

Simplified versus traditional techniques for complete denture fabrication: a systematic review.

STATEMENT OF PROBLEM: A number of methods have been described for the fabrication of complete dentures. There are 2 common ways to make conventional complete dentures: a traditional method and a simplified method. PURPOSE: The purpose of this study was to conduct a systematic review to compare the efficiency of simplified and traditional methods for the fabrication of complete dentures. MATERIAL AND METHODS: The review was conducted by 3 independent reviewers and included articles published up to December 2013. Three electronic databases were searched: MEDLINE-PubMed, The Cochrane Library, and ISI Web of Science. A manual search also was performed to identify clinical trials of simplified versus traditional fabrication of complete dentures. RESULTS: Six articles were classified as randomized controlled clinical trials and were included in this review. The majority of the selected articles analyzed general satisfaction, denture stability, chewing ability and function, comfort, hygiene, esthetics, speech function, quality of life, cost, and fabrication time. CONCLUSIONS: Although the studies reviewed demonstrate some advantages of simplified over traditional prostheses, such as lower cost and clinical time, good chewing efficiency, and a positive effect on the quality of life, the reports related the use of different simplified methods for the fabrication of complete dentures. Additional randomized controlled trials that used similar simplified techniques for the fabrication of complete dentures should be performed with larger sample sizes and longer follow-up periods.

Digital data acquisition for a CAD/CAM-fabricated titanium framework and zirconium oxide restorations for an implant-supported fixed complete dental prosthesis.

This dental technique report describes a digital workflow with digital data acquisition at the implant level, computer-aided design and computer-aided manufacturing fabricated, tissue-colored, anodized titanium framework, individually luted zirconium oxide restorations, and autopolymerizing injection-molded acrylic resin to fabricate an implant-supported, metal-ceramic-resin fixed complete dental prosthesis in an edentulous mandible. The 1-step computer-aided design and computer-aided manufacturing fabrication of titanium framework and zirconium oxide restorations can provide a cost-effective alternative to the conventional metal-resin fixed complete dental prosthesis.

Cost-effectiveness of silicone and alginate impressions for complete dentures.

OBJECTIVE: The aim of this study was to assess the cost effectiveness of silicone and alginate impressions for complete dentures. METHODS: Cost effectiveness analyses were undertaken alongside a UK single centre, double blind, controlled, crossover clinical trial. Taking the perspective of the healthcare sector, effectiveness is measured using the EuroQol (EQ-5D-3L) which provides a single index value for health status that may be combined with time to produce quality adjusted life years (QALYs); and Oral Health Impact Profile (OHIP-EDENT). Incremental cost effectiveness ratios are presented representing the additional cost per one unit gained. RESULTS: Mean cost was higher in the silicone impression group (£388.57 vs. £363.18). Negligible between-group differences were observed in QALY gains; the silicone group had greater mean OHIP-EDENT gains. The additional cost using silicone was £3.41 per change of one point in the OHIP-EDENT. CONCLUSIONS: The silicone group was more costly, driven by the cost of materials. Changes in the EQ-5D and QALY gains over time and between arms were not statistically significant. Change in OHIP-EDENT score showed greater improvement in the silicone group and the difference between arms was statistically significant. Given negligible QALY gains and low level of resource use, results must be treated with caution. It is difficult to make robust claims about the comparative cost-effectiveness. CLINICAL SIGNIFICANCE: Silicone impressions for complete dentures improve patients' quality of life (OHIP-EDENT score). The extra cost of silicone impressions is £30 per patient. Dentists, patients and health care funders need to consider the clinical and financial value of silicone impressions. Different patients, different dentists, different health funders will have individual perceptions and judgements. ISRCTN01528038. NIHR-RfPB grant PB-PG-0408-16300. This article forms part of a project for which the author (TPH) won the Senior Clinical Unilever Hatton Award of the International Assocation for Dental Research, Capetown, South Africa, June 2014.

A randomized trial on simplified and conventional methods for complete denture fabrication: cost analysis.

PURPOSE: This study aimed to quantify the costs of complete denture fabrication by a simplified method compared with a conventional protocol. MATERIALS AND METHODS: A sample of edentulous patients needing conventional maxillary and mandibular complete dentures was randomly divided into group S, which received dentures fabricated by a simplified method, and group C, which received conventionally fabricated dentures. We calculated direct and indirect costs for each participant including unscheduled procedures. This study assessed 19 and 20 participants allocated into groups S and C, respectively, and comparisons between groups were conducted by the Mann-Whitney and Student's t-test (α = 0.05). RESULTS: Complete denture fabrication demanded median time periods of 173.2 and 284.5 minutes from the operator for groups S and C respectively, and 46.6 and 61.7 minutes from the dental assistant (significant differences, p < 0.05). There was no difference between groups regarding postinsertion adjustments. Group S showed lower values for costs with materials and time spent by patients than group C during the fabrication stage, but not during adjustments. CONCLUSIONS: The median direct cost of complete denture treatment was 34.9% lower for the simplified method. It can be concluded that the simplified method is less costly for patients and the health system when compared with a conventional protocol for the rehabilitation of edentulous patients.

Intraoral framework pick-up technique to improve fit of a metal-resin implant prosthesis.

The achievement of passive fit is an important prerequisite for the prevention of complications in full-arch screw-retained implant prosthesis. With cemented prosthesis, the cementation compensates for the discrepancies in the cast framework, but the lack of retrievability seems undesirable. The aim of this paper is to propose a modified screw-retained prosthesis design for complete arch implant fixed rehabilitation. A technique for the fabrication of a full-arch metal-resin implant-supported screw-retained prosthesis is described. Cementation of the framework to the abutments intraorally improves the passivity of fit of the prosthesis on the implants. Maintenance of screw-access channels in the final prosthesis ensures retrievability. The metal-resin design allows for easy repair and maintenance. The prosthesis is cost-effective compared to conventional options and can be employed as a viable treatment alternative when considering metal-acrylic resin complete arch fixed prosthesis.

Cast metal bases as an economical alternative for the severely resorbed mandible.

Resorption of the alveolar ridge is a common problem in edentulous patients and can compromise the stability and function of dentures. Resorption and its consequences can be minimized when strategically placed implants are used; however, this option is financially out of reach for many patients. The article discusses a more cost-effective alternative (metalbased dentures) for patients with ridge resorption. In certain environments, like a dental school, where patients are looking for solutions to their dental problems at a reasonable price, cast metal bases can be a feasible economical alternative for edentulous patients. Both cases presented here demonstrated a significant improvement in stability, phonation, and mastication.

[How up-to-date are metal-based resin-bonded fixed partial dentures in the era of full-ceramics and dental implants? A case report]. / Wie aktuell sind metallkeramische Adhäsivbrücken im Zeitalter der Vollkeramik und der Implantologie? Ein Fallbericht.

Regardless of the success of preventive measures the replace¬ment of missing teeth in young patients with caries-free dentitions is a daily challenge for the clinician. The decision-making process concerning the different treatment options is difficult, based on several equivalent solutions. Thereby the significance of minimal invasive approaches is steadily increasing. In indicated cases, resin-bonded fixed partial dentures which were introduced in the last century still represent a well documented and minimally invasive procedure, even in the era of dental implants. In this article, clinical aspects of a conventional, metal-based resin-bonded fixed partial dentures are discussed according to the current literature and the clinical steps are presented in a clinical case.

Estimating costs for shade matching and shade corrections of fixed partial dentures for dental technicians in Germany: a pilot investigation.

AIMS: To evaluate the additional operating expenses caused by shade matching by dental technicians in the dental practice and by color changes of fixed partial dentures. METHODS: A questionnaire was handed out to visitors of the 2010 ADT dental technician congress in Germany. Thirty-one completed questionnaires were evaluated. RESULTS: Mean costs caused by shade matching and shade correction per month were 1269$ (SD = 1278$; n = 25) and per unit of FPD 9.32$ (SD = 8.89$). CONCLUSIONS: An improvement of shade matching, shade communication and reproduction should be made in order to minimize the considerable economic damage for dental laboratories.

Efficient resource use in simplified complete denture fabrication.

PURPOSE: Conventional dentures will remain the only treatment available to most edentulous people for the foreseeable future. In this study, we compared the efficiency of two methods of making complete conventional dentures-the traditional academic standard (T) and a simplified technique (S) used in private practice. We have previously shown that they produce similar levels of patient satisfaction and denture quality. MATERIALS AND METHODS: Data were gathered during a randomized controlled clinical trial of 122 subjects from initial examination until 6-month follow-up. For this report, the direct costs of providing one set of conventional complete dentures by T or S techniques were estimated. All materials used were recorded and their cost was calculated in Canadian dollars (CAN$). The costs of fabrication in an outside laboratory were added. Clinician's labor time was recorded for every procedure. Between-group comparisons for each clinical procedure were carried out with independent t-tests. The number of patients in each group who needed postdelivery treatment was compared with Chi-square tests. The effect of group assignment and of treatment difficulty on outcomes was analyzed with multiple regression analysis. RESULTS: The mean total cost of the T method was significantly greater than S (CAN$166.3; p < 0.001), and clinicians spent 90 minutes longer (p < 0.001) on clinical care. The difficulty of the case had no significant influence on outcomes. CONCLUSIONS: The results indicate that the S method is the more cost-efficient method and that there are no negative consequences that detract from the cost savings.

Subjective values of different treatments for missing molars in older Japanese.

The purpose of this study was to determine how elderly Japanese people subjectively value treatment options for missing molars. Subjects were 528 independently community-dwelling elderly people. They were presented with photographs and descriptions of the process and expected outcomes of five possible treatment options: cantilever fixed dental prosthesis (FDP); resin or metal removable partial denture prosthesis (RPDP); implant-supported fixed prosthesis; and no replacement (shortened dental arch: SDA) for missing lower bilateral first and second molars. The participants filled in the questionnaire on subjective importance for treatment and indicated on a visual analogue scale how they valued the treatment (utility value: UV). Values were analysed by Mann-Whitney U-tests and multiple logistic regression analyses. Overall, the UVs for the FDP and the metal RPDP were the highest, and the UV for the SDA was the lowest. With respect to subjective importance, 'chewing ability' and 'no pain during function' were significantly selected more frequently. Multiple logistic regression analyses showed that the UV for the resin RPDP had significant positive associations with denture wearers and low treatment cost, whereas the implant had significant negative associations with denture wearers and older age. The SDA had significant positive associations with men and low treatment cost and a negative association with appearance. In conclusion, these elderly Japanese preferred cantilever FDPs and metal RPDPs to implants and 'no replacement.' It suggests that the SDA as an oral health goal can be questionable from the patients' point of view, even if it is biologically correct.

A method for the easy fabrication of all-ceramic bridges with the Cerec system.

Both pressing technology and CAD/CAM methods have proven themselves clinically for the fabrication of all-ceramic restorations. The advantages of the Cerec technology for the economic fabrication of all-ceramic bridges can be exploited by the use of burn-out blanks of polymer material. The milling process of very hard ceramics in the milling unit, which has some disadvantages, is replaced by the pressing process and makes the IPS e.max press material accessible to CAD/CAM users, primarily for extending the range of indications to splinted crowns and small all-ceramic bridges.