In vitro toxicity assessment of polyethylene terephthalate and polyvinyl chloride microplastics using three cell lines from rainbow trout (Oncorhynchus mykiss).

The RTgill-W1 (gill), RTG-2 (gonad), and RTL-W1 (liver) cell lines derived from a freshwater fish rainbow trout (Oncorhynchus mykiss), were used to assess the toxicity of polyethylene terephthalate (PET) and two forms of polyvinyl chloride (PVC). Two size fractions (25-µm and 90-µm particles) were tested for all materials. The highest tested concentration was 1 mg/ml, corresponding to from 70 000 ± 9000 to 620 000 ± 57 000 particles/ml for 25-µm particles and from 2300 ± 100 to 11 000 ± 1000 particles/ml for 90-µm particles (depending on the material). Toxicity differences between commercial PVC dry blend powder and secondary microplastics created from a processed PVC were newly described. After a 24-h exposure, the cells were analyzed for changes in viability, 7-ethoxyresorufin-O-deethylase (EROD) activity, and reactive oxygen species (ROS) generation. In addition to the microplastic suspensions, leachates and particles remaining after leaching resuspended in fresh exposure medium were tested. The particles were subjected to leaching for 1, 8, and 15 days. The PVC dry blend (25 µm and 90 µm) and processed PVC (25 µm) increased ROS generation, to which leached chemicals appeared to be the major contributor. PVC dry blend caused substantially higher ROS induction than processed PVC, showing that the former is not suitable for toxicity testing, as it can produce different results from those of secondary PVC. The 90-µm PVC dry blend increased ROS generation only after prolonged leaching. PET did not induce any changes in ROS generation, and none of the tested polymers had any effect on viability or EROD activity. The importance of choosing realistic extraction procedures for microplastic toxicity experiments was emphasized. Conducting long-term experiments is crucial to detect possible environmentally relevant effects. In conclusion, the tested materials showed no acute toxicity to the cell lines.

A new continuous assay for quantitative assessment of enzymatic degradation of poly(ethylene terephthalate) (PET).

Enzymatic degradation of poly(ethylene terephthalate) (PET) has emerged as a promising route for ecofriendly biodegradation of plastic waste. Several discontinuous activity assays have been developed for assessing PET hydrolyzing enzymes, usually involving manual sampling at different time points during the course of the enzymatic reaction. In this work, we present a novel, compartmentalized UV absorbance assay for continuous detection of soluble hydrolysis products released during enzymatic degradation of PET. The methodology is based on removal of the walls separating two diagonally adjacent wells in UV-transparent microplates, to ensure passage of soluble enzymatic hydrolysis products between the two adjacent wells: One well holds an insoluble PET disk of defined dimensions and the other is used for continuous reading of the enzymatic product formation (at 240 nm). The assay was validated by quantifying the rate of mixing of the soluble PET degradation product BHET (bis(2-hydroxyethyl) terephthalate) between the two adjacent wells. The assay validation also involved a simple adjustment for water evaporation during prolonged assays. With this new assay, we determined the kinetic parameters for two PET hydrolases, DuraPETase and LCCICCG, and verified the underlying assumption of steady-state reaction rates. This new continuous assay enables fast exploration and robust kinetic characterization of PET degrading enzymes.

Assessment of the PETase conformational changes induced by poly(ethylene terephthalate) binding.

Recently, a bacterium strain of Ideonella sakaiensis was identified with the uncommon ability to degrade the poly(ethylene terephthalate) (PET). The PETase from I. sakaiensis strain 201-F6 (IsPETase) catalyzes the hydrolysis of PET converting it to mono(2-hydroxyethyl) terephthalic acid (MHET), bis(2-hydroxyethyl)-TPA (BHET), and terephthalic acid (TPA). Despite the potential of this enzyme for mitigation or elimination of environmental contaminants, one of the limitations of the use of IsPETase for PET degradation is the fact that it acts only at moderate temperature due to its low thermal stability. Besides, molecular details of the main interactions of PET in the active site of IsPETase remain unclear. Herein, molecular docking and molecular dynamics (MD) simulations were applied to analyze structural changes of IsPETase induced by PET binding. Results from the essential dynamics revealed that the ß1-ß2 connecting loop is very flexible. This loop is located far from the active site of IsPETase and we suggest that it can be considered for mutagenesis to increase the thermal stability of IsPETase. The free energy landscape (FEL) demonstrates that the main change in the transition between the unbound to the bound state is associated with the ß7-α5 connecting loop, where the catalytic residue Asp206 is located. Overall, the present study provides insights into the molecular binding mechanism of PET into the IsPETase structure and a computational strategy for mapping flexible regions of this enzyme, which can be useful for the engineering of more efficient enzymes for recycling plastic polymers using biological systems.

Modeling and assessment of long afterglow decay curves.

Multiple exponential equations have been successfully fitted to experimental long afterglow decay curve data for some phosphor materials by previous researchers. The calculated decay constants in such equations are used to assess the phosphorescence characteristics of an object. This study generates decay constants from experimental test data and from existing literature for comparison. It shows that the decay constants of an object may not be invariant and that they are dependent on phosphor material, temperature, irradiation intensity, sample thickness, and phosphor density for samples. In addition, the use of different numbers of exponential components in interpretation leads to different numerical results for decay constants. The relationship between the calculated decay constants and the afterglow characteristics of an object is studied and discussed in this paper. The appearance of the luminescence intensity is less correlated to the decay constants than to the time-invariant constants in an equation.

A novel small animal model for biocompatibility assessment of polymeric materials for use in prosthetic heart valves.

A composite polymeric material, poly(styrene-block-isobutylene-block-styrene) (SIBS) with an embedded reinforcement polyethylene terephthalate (PET) fabric, is undergoing investigation for potential use in a novel heart valve. The purpose of this study was to develop and implement a small animal model to assess the biocompatibility of composite samples in a cardiovascular tissue and blood-contacting environment. Composite samples were manufactured using dip coating and solvent casting with two coating thicknesses (25 and 50 microm). A novel rat abdominal aorta model was developed to test the dip-coated samples in a similar pulsatile flow condition to its intended use, and both dip-coated and solvent-cast samples were tested using a rat subcutaneous model. Tissue response, defined by degree of cellular infiltration and encapsulation, was minimized when a smooth coating of SIBS shielded the PET fabric from exposure to blood and tissue, and the degree of tissue response was directly correlated with the degree of surface roughness. Surface modification using phospholipid further reduces the tissue response. We have demonstrated the applicability of using a novel rat abdominal aorta model for biocompatibility assessment of polymeric materials that will be used in cardiovascular implants. For the purpose of this study, our results indicate that solvent casting with a 25-microm SIBS coating thickness will provide optimal biocompatibility for the SIBS valve.

Standardization and assessment of cell culture media quantities in roller poly ethylene terephthalate bottles employed in the industrial rabies viral vaccine production.

Vero cells are utilized for production of rabies vaccine. This study deals with the optimize quantity media require for the rabies vaccine production in the smooth roller surface. The rabies virus (Pasteur vaccine strain) is infected to monolayer of the various experimented bottles. To analyze the optimal quantity of media for the production of rabies viral harvest during the process of Vero cell derived rabies vaccine. The trials are started from 200 to 400 mL (PTARV-1, PTARV-2, PTARV-3, PTARV-4 and PTARV-5). The samples are taken in an appropriate time intervals for analysis of In Process Quality Control (IPQC) tests. The collected viral harvests are further processed to rabies vaccine in a pilot level and in addition to scale up an industrial level. Based on the evaluation the PTARV-2 (250 mL) show highly encouraging results for the Vero cell derived rabies vaccine production.

In vivo assessment of a novel dacron surface with covalently bound recombinant hirudin.

Prosthetic arterial graft surfaces are relatively thrombogenic and fail to heal with a cellular neointima. The goal of this study was to characterize the in vivo antithrombin properties of a novel Dacron surface with covalently linked recombinant hirudin (rHir) implanted in a canine thoracic aorta with high flow and shear rates. rHir was bound to a knitted Dacron patch using crosslinker-modified bovine serum albumin (BSA) as a basecoat protein. BSA was first reacted with the heterobifunctional crosslinker, sulfo-SMCC. This BSA-SMCC complex was then bound to the carboxylic acid groups of hydrolyzed Dacron patches using the carbodiimide crosslinker, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride. Iodinated, Traut's-modified rHir (125I-rHir-SH) was then reacted with the Dacron-BSA-SMCC surface, thereby covalently binding 125I-rHir. Graft segments were washed and sonicated to remove any nonspecifically bound 125I-rHir. Dacron-BSA-SMCC-S-125I-rHir patches (n = 5) and control Dacron-BSA patches (n = 5) were implanted in series in the thoracic aortas of canines. These patches were exposed to nonheparinized, arterial blood flow for 2 hours. Patches were explanted and assessed for 125I-rHir loss. Antithrombin activity of explanted 1-cm2 patch segments was evaluated using a chromogenic assay with 1, 5, 10, 15 units of added thrombin. Light microscopy was performed to qualitatively examine the pseudointima. Two animals were excluded from the study owing to excessive bleeding through the knitted 125I-rHir patch. Comparison of preoperative and postoperative 125I-rHir gamma counts revealed an overall decrease of 20+/-5.4% over the period studied. Explanted 125I-rHir patch segments were able to inhibit 1, 5, and 7 NIHU of thrombin, demonstrating retained antithrombin activity. Gross and microscopic examination of the control and test Dacron surfaces showed marked differences. Dacron surfaces with covalently bound 125I-rHir had no gross thrombus and a thin pseudointima of platelets and plasma proteins. In contrast, the control patches had a thick pseudointima composed of fibrin-rich thrombus. rHir, covalently bound to Dacron patches, maintains its biologic activity as well as prevents thrombus formation on the graft surface. This novel antithrombin coating, by modifying the blood/ graft interface, may improve both short- and long-term patency in small-diameter prosthetic arterial grafts and has applications with respect to other implantable or indwelling biomaterials.