Synthesis and Preliminary Biological Assessment of Carborane-Loaded Theranostic Nanoparticles to Target Prostate-Specific Membrane Antigen.

Boron neutron capture therapy (BNCT) is an encouraging therapeutic modality for cancer treatment. Prostate-specific membrane antigen (PSMA) is a cell membrane protein that is abundantly overexpressed in prostate cancer and can be targeted with radioligand therapies to stimulate clinical responses in patients. In principle, a spatially targeted neutron beam together with specifically targeted PSMA ligands could enable prostate cancer-targeted BNCT. Thus, we developed and tested PSMA-targeted poly(lactide-co-glycolide)-block-poly(ethylene glycol) (PLGA-b-PEG) nanoparticles (NPs) loaded with carborane and tethered to the radiometal chelator deferoxamine B (DFB) for simultaneous positron emission tomography (PET) imaging and selective delivery of boron to prostate cancer. Monomeric PLGA-b-PEGs were covalently functionalized with either DFB or the PSMA ligand ACUPA. Different nanoparticle formulations were generated by nanoemulsification of the corresponding unmodified and DFB- or ACUPA-modified monomers in varying percent fractions. The nanoparticles were efficiently labeled with 89Zr and were subjected to in vitro and in vivo evaluation. The optimized DFB(25)ACUPA(75) NPs exhibited strong in vitro binding to PSMA in direct binding and competition radioligand binding assays in PSMA(+) PC3-Pip cells. [89Zr]DFB(25) NPs and [89Zr]DFB(25)ACUPA(75) NPs were injected to mice with bilateral PSMA(-) PC3-Flu and PSMA(+) PC3-Pip dual xenografts. The NPs demonstrated twofold superior accumulation in PC3-Pip tumors to that of PC3-Flu tumors with a tumor/blood ratio of 25; however, no substantial effect of the ACUPA ligands was detected. Moreover, fast release of carborane from the NPs was observed, resulting in a low boron delivery to tumors in vivo. In summary, these data demonstrate the synthesis, characterization, and initial biological assessment of PSMA-targeted, carborane-loaded PLGA-b-PEG nanoparticles and establish the foundation for future efforts to enable their best use in vivo.

Efficacy assessment of self-assembled PLGA-PEG-PLGA nanoparticles: Correlation of nano-bio interface interactions, biodistribution, internalization and gene expression studies.

The aim of our study was to develop and compare the biological performance of two types of biodegradable SN-38 loaded nanoparticles (NPs) with various surface properties, composed of low and high Mw triblock PLGA-PEG-PLGA copolymers, applying rational quality and safety by design approach. Therefore, along with the optimization of crucial physico-chemical properties and in order to evaluate the therapeutical potential and biocompatibility of prepared polymeric nanoparticles, analysis of nano-bio interactions, cell internalization, gene expression and biodistribution studies were performed. The optimized formulations, one of low Mw and one composed of high Mw PLGA-PEG-PLGA copolymer, exhibited different characteristics in terms of surface properties, particle size, zeta potential, drug loading, protein adsorption and biodistribution, which may be attributed to the variations in nano-bio interface interactions due to different NP building blocks length and Mw. On the contrary to protein adsorption and biodistribution studies, both types of NPs exhibited similar results during cell internalization and gene expression studies performed in cell culture medium containing serum proteins. This pool of useful data for internalization and efficacy as well as the notable advance in the circulation time of low Mw NPs may be further employed for shaping the potential of the designed nanocarriers.

PLGA-PEG-PLGA triblock copolymeric micelles as oral drug delivery system: In vitro drug release and in vivo pharmacokinetics assessment.

Poly (d,l-lactide-co-glycolide)-poly (ethylene glycol)-poly (d,l-lactide-co-glycolide) triblock copolymers (PLGA-PEG-PLGA) has been proven to be desirable for anti-cancer drug delivery by intravenous administration. But till now there is no report of developing this micelle as a sustained oral formulation for cancer therapy. 3ß-acetoxy-urs-12-en-28-oic acid hexamethylenediamine (US597), a derivative of natural product ursolic acid has been developed as a novel cancer metastasis chemopreventive agent by us. Herein, we developed a new oral dosage formulation of PLGA-PEG-PLGA tri-block micelles loaded with US597 (US597@micelles). US597@micelles was prepared by a double emulsion solvent evaporation method, and characterized in regards to mean diameter (<100nm), drug loading (25.9-28.5%), zeta potential (5.76-10.65mV) and encapsulation efficiency (55.7-74.3%), respectively. In vitro, US597@micelles could ameliorate sustained drug release, inhibit cell proliferation by inducing apoptosis (46.6% of late apoptosis), and influence the integrity of nuclei and mitochondrial on HepG2. Moreover, in vivo pharmacokinetic study by UPLC/MS/MS method demonstrated better absorption, metabolism and elimination characters of US597@micelles as an oral dosage form (Cmax=53±49ng/mL, t1/2=8.716±7.033h) over free US597 (Cmax=14±11ng/mL, t1/2=16.433±8.821h). In conclusion, PLGA-PEG-PLGA micelles as a promising oral drug delivery system are able to improve the bioavailability and efficacy of US597 in cancer therapy.

Assessment of PLGA-PEG-PLGA copolymer hydrogel for sustained drug delivery in the ear.

Temperature sensitive copolymer systems were previously studied using modified diffusion cells in vitro for intratympanic injection, and the PLGA-PEG-PLGA copolymer systems were found to provide sustained drug delivery for several days. The objectives of the present study were to assess the safety of PLGA-PEG-PLGA copolymers in intratympanic injection in guinea pigs in vivo and to determine the effects of additives glycerol and poloxamer in PLGA-PEGPLGA upon drug release in the diffusion cells in vitro for sustained inner ear drug delivery. In the experiments, the safety of PLGA-PEG-PLGA copolymers to inner ear was evaluated using auditory brainstem response (ABR). The effects of the additives upon drug release from PLGA-PEG-PLGA hydrogel were investigated in the modified Franz diffusion cells in vitro with cidofovir as the model drug. The phase transition temperatures of the PLGA-PEG-PLGA copolymers in the presence of the additives were also determined. In the ABR safety study, the PLGA-PEG-PLGA copolymer alone did not affect hearing when delivered at 0.05-mL dose but caused hearing loss after 0.1-mL injection. In the drug release study, the incorporation of the bioadhesive additive, poloxamer, in the PLGA-PEG-PLGA formulations was found to decrease the rate of drug release whereas the increase in the concentration of the humectant additive, glycerol, provided the opposite effect. In summary, the PLGA-PEG-PLGA copolymer did not show toxicity to the inner ear at the 0.05-mL dose and could provide sustained release that could be controlled by using the additives for inner ear applications.

Perfluorocarbon-filled poly(lactide-co-gylcolide) nano- and microcapsules as artificial oxygen carriers for blood substitutes: a physico-chemical assessment.

The physico-chemical suitability of perfluorocarbon-filled capsules as artificial oxygen carriers for blood substitutes is assessed on the example of biodegradable poly(lactide-co-gylcolide) micro- and nanocapsules with a liquid content of perfluorodecalin. The morphology of the capsules is studied by confocal laser scanning microscopy using Nile red as a fluorescent marker. The mechanical stability and the wall flexibility of the capsules are examined by atomic force microscopy. The permeability of the capsule walls in connection with the oxygen uptake is detected by nuclear magnetic resonance. It is shown that the preparation in fact leads to nanocapsules with a mechanical stability which compares well with the one of red blood cells. The capsule walls exhibit sufficient permeability to allow for the exchange of oxygen in aqueous environment. In the fully saturated state, the amount of oxygen dissolved within the encapsulated perfluorodecalin in aqueous dispersion is as large as for bulk perfluorodecalin. Simple kinetic studies are presently restricted to the time scale of minutes, but so far indicate that the permeability of the capsule walls could be sufficient to allow for rapid gas exchange.

Non-invasive in vivo evaluation of in situ forming PLGA implants by benchtop magnetic resonance imaging (BT-MRI) and EPR spectroscopy.

In the present study, we used benchtop magnetic resonance imaging (BT-MRI) for non-invasive and continuous in vivo studies of in situ forming poly(lactide-co-glycolide) (PLGA) implants without the use of contrast agents. Polyethylene glycol (PEG) 400 was used as an alternative solvent to the clinically used NMP. In addition to BT-MRI, we applied electron paramagnetic resonance (EPR) spectroscopy to characterize implant formation and drug delivery processes in vitro and in vivo. We were able to follow key processes of implant formation by EPR and MRI. Because EPR spectra are sensitive to polarity and mobility, we were able to follow the kinetics of the solvent/non-solvent exchange and the PLGA precipitation. Due to the high water affinity of PEG 400, we observed a transient accumulation of water in the implant neighbourhood. Furthermore, we detected the encapsulation by BT-MRI of the implant as a response of the biological system to the polymer, followed by degradation over a period of two months. We could show that MRI in general has the potential to get new insights in the in vivo fate of in situ forming implants. The study also clearly shows that BT-MRI is a new viable and much less expensive alternative for superconducting MRI machines to monitor drug delivery processes in vivo in small mammals.

Physicochemical properties and in vivo assessment of timolol-loaded poly(D,L-lactide-co-glycolide) films for long-term intraocular pressure lowering effects.

Timolol-loaded poly(D,L-lactide-co-glycolide; PLGA) films were prepared for achieving the long-term intraocular pressure (IOP) lowering effect on glaucoma treatment. The physicochemical properties and in vivo effects of films were determined and characterize the delivery system. PLGA, span 20, propylene glycol (PG), and timolol base were dissolved in dichloromethane (DCM) and kept in a stainless mold; timolol films were prepared after the evaporation of DCM. Timolol disc-shape film preparation (TDF), containing 1 mg of timolol in 0.37 cm(2) area, was fabricated by using a trephine and placed onto the cul de sac of alpha-chymotrypsin-induced ocular hypertension rabbits for assessing the IOP lowering effect. The prepared films characterized a Young's modulus ranged from 1.13 to approximately 2.49 MPa, and related to the content percentages of PLGA, PG, and the residual DCM. The timolol film could maintain drug release for 1 week. Following a single-dose application in ocular hypertension rabbits, the prepared TDF could achieve a long-term IOP lowering effect and maintain the IOP change (in comparison with baseline) of approximately 7 mmHg within 1 week. The aqueous humor levels of timolol were low within a range of 0.8 to approximately 0.24 microg/mL for the initial 24 h and less than 0.15 microg/mL for 4-7 days. The investigated film formulation might be potentially developed for the application of long-term ocular delivery systems.