Application of Multiple Occupational Health Risk Assessment Models for Metal Fumes in Welding Process.

Welding fumes have an important role to create the adverse health effects. So, the aim of this study was to use of multiple occupational health risk assessment models for metal fumes in welding process. This cross-sectional study was conducted among welding workers. Sampling of heavy metals such as Sn, Zn, Al, Fe, Cd, Pb, Cu, Mn, Ni, Cr, and As was provided based on the National Institute for Occupational Safety and Health (NIOSH) method 7300 and analyzed by inductively coupled plasma mass spectroscopy (ICP-MS). Risk assessment was managed by four methods including Malaysia's method, Control of Substances Hazardous to Health Essentials (COSHH model), Chinese OHRA standard (GBZ/T 298-2017), and EPA method. Also, Monte Carlo simulation was used to examine the uncertainties by using the Crystal Ball tool. To compare the models, the risk levels of each model were converted into the risk ratio and the SPSS 22.0 software was used to the statistical analysis. The consistency of the two occupational health risk assessment models was examined by Cohen's Kappa. Risk ration was the highest level for Cr (VI) fumes in all models. Also, carcinogenic risk was unacceptable for all examined fumes. Moreover, non-carcinogenic risk was the highest (HI > 1) for As fumes. Mont Carlo simulations suggested that exposure time (ET) had a significant effect on the risk. Also, there was a good consistency between Malaysia method/GBZ/T 298-2017 and COSHH model/GBZ/T 298-2017. Therefore, it is recommended that the engineering and administrative controls should be provided to reduce exposure.

[Current status and research progress of occupational health monitoring in welding fume operations].

Welding operations are widely present in the manufacturing production process, involving a large number of occupational groups, and are the key occupations where work injuries and occupational diseases occur in China. For different welding processes and welding materials, the content and focus of occupational health monitoring are different. At present, the item of occupational health examination in welding operation is in poor consistency with the on-site exposure of occupational hazard factors, and it is mainly concentrated in the stage of disease development, which can not reflect the early health damage caused by welding dust exposure in time. The emergence of biomarkers of welding dust can make up for this defect. Therefore, it is of great significance to describe the current situation of occupational health monitoring of welding dust and summarize the research progress of related biomarkers for the early prevention of diseases caused by welding dust and the practice of occupational health monitoring.

Occupational Exposure to Metal Fumes Among Iranian Welders: Systematic Review and Simulation-Based Health Risk Assessment.

There have been numerous reports of welder's worker exposure to metal fumes. Carcinogenic and non-carcinogenic (neurological, dermal, and etc.) effects are the adverse outcomes of exposure to welding fumes. In this review study, data were collected from previous studies conducted in Iran from 1900 to 2020. The risk of carcinogenicity and non-carcinogenicity due to exposure to welding metal fumes was assessed using the United States Environmental Protection Agency (USEPA) method based on the Monte Carlo simulation (MCS). Results showed mean of metal fume concentration in gas welding was in the range of 1.8248 to 1060.6 (µg/m3) and in arc welding was 54.935 to 4882.72 (µg/m3). The mean concentration of fumes in gas welding is below the recommended American Conference of Governmental Industrial Hygienists (ACGIH) standard exposure limit except for manganese, and in the arc welding, all metal fume concentrations are below the standard exposure limit except for manganese and aluminum. The results showed that the risk of carcinogenicity due to exposure to nickel, manganese in both gas and arc welding, and cadmium in gas welding was higher than standard level (hazard quotient (HQ) more than 1). Cancer risk due to exposure to nickel in both gas and arc welding was probable (1 × 10-6 < cancer risk (CR) < 1 × 10-4). Health risk assessment showed that welders are exposed to health risks. Preventive measures should be applied in welding workplaces to reduce the concentrations of metal fumes.

Carcinogenic risk assessment and changes in Spirometric indices in casting and welding workers exposed to Metal fumes.

INTRODUCTION: The aim of this study was to investigate exposure to dust, and metal fumes, changes in pulmonary function indices among industrial workers to estimate the carcinogenic and non-carcinogenic risk of exposure to occupational metal fume.

Methods: This cross-sectional study was performed on 98 workers exposed to metal fumes. Air sampling was performed according to the NIOSH 0500 method and was analyzed by gravimetry and metal levels were analyzed by atomic absorption spectrometry. Spirometric results for 2010-2016 were collected. Carcinogenic and non-carcinogenic risk assessments were performed according to the US Environmental Protection Agency guidelines. Data were analyzed by SPSS 20 software. RESULTS: The mean occupational exposure of the subjects to workplace dust and iron fumes was 15.95 ± 6.65 mg/m3 and 13.18 ± 3.06 mg/m3 respectively. During these 6 years, the FVC (P=0.04), PEFR (P=0.04), and FEV1 (P=0.03) indices decreased significantly among welders, but there was no significant difference between FEV1/ FVC indexes. Also, the mean of FEV1 and PEFR decreased significantly amongst casting workers, but FVC and FEV1/ FVC had no significant difference. Multivariate regression showed that in both jobs, BMI and work history were related to pulmonary function indices. The mean total excess ifetime carcinogenic risk (ELCR) of hexavalent chromium in the study population was 0.708 per 1000 people and the mean non-carcinogenic risk of hexavalent chromium was HQ = 19.62. CONCLUSIONS: The results showed that exposure to metal fumes in casting and welding jobs reduces pulmonary function indices. Although the average occupational exposure to hexavalent chromium is lower than the recommended limit and the risk of carcinogenesis is within an acceptable range, the risk of non-carcinogenic effects among workers is significant Therefore, it is important to prevent this problem, by adequate ventilation and using respiratory masks.

Long-term metal fume exposure assessment of workers in a shipbuilding factory.

This study aims to assess the metal fume exposure of welders and to determine exposure rates for similar exposure groups in a shipyard through the use of Near-field/Far-field (NF/FF) mathematical model and Bayesian decision analysis (BDA) technique. Emission rates of various metal fumes (i.e., total chromium (Cr), iron (Fe), lead (Pb), manganese (Mn), and nickel (Ni)) were experimentally determined for the gas metal arc welding and flux cored arc welding processes, which are commonly used in shipyards. Then the NF/FF field model which used the emission rates were further validated by welding simulation experiment, and together with long-term operation condition data obtained from the investigated shipyard, the predicted long-term exposure concentrations of workers was established and used as the prior distribution in the BDA. Along with the field monitoring metal fume concentrations which served as the likelihood distribution, the posterior decision distributions in the BDA were determined and used to assess workers' long-term metal exposures. Results show that the predicted exposure concentrations (Cp) and the field worker's exposure concentrations (Cm) were statistically correlated, and the high R2 (= 0.81-0.94) indicates that the proposed surrogate predicting method by the NF and FF model was adequate for predicting metal fume concentrations. The consistency in both prior and likelihood distributions suggests the resultant posterior would be more feasible to assess workers' long-term exposures. Welders' Fe, Mn and Pb exposures were found to exceed their corresponding action levels with a high probability (= 54%), indicating preventive measures should be taken immediately. The proposed approach provides a universal solution for conducting exposure assessment with usual limited number of personal exposure data.

Health risk assessment of occupational exposure to heavy metals in a steel casting unit of a steelmaking plant using Monte-Carlo simulation technique.

The present work aimed to evaluate the health risks of occupational exposure to heavy metals in a steel casting unit of a steel plant. To determine occupational exposure to heavy metals, personal air samples were taken from the workers' breathing zones using the National Institute for Occupational Safety and Health method. Noncancer and cancer risks due to the measured metals were calculated according to the United States Environmental Protection Agency procedures. The results indicated that the noncancer risks owing to occupational exposure to lead (Pb) and manganese were higher than the recommended value in most of the workstations. The estimated cancer risk of Pb was also higher than the allowable value. Moreover, the results of sensitivity analysis indicated that the concentration, inhalation rate, and exposure duration were the most influencing variables contributing to the calculated risks. It was thus concluded that the present control measures were not adequate and further improvements were required for reducing the exposure levels.

Metal additive manufacturing and possible clinical markers for the monitoring of exposure-related health effects.

Additive manufacturing (AM) includes a series of techniques used to create products, in several different materials, such as metal, polymer or ceramics, with digital models. The main advantage of AM is that it allows the creation of complex structures, but AM promises several additional advantages including the possibility to manufacture on demand or replacing smaller worn parts by directly building on an existing piece. Therefore, the interest for and establishment of AM is rapidly expanding, which is positive, however it is important to be aware that new techniques may also result in new challenges regarding health and safety issues. Metals in blood and possible clinical effects due to metal exposure were investigated in AM operators at one of the first serial producing AM facilities in the world during two consecutive years with implementation of preventive measures in-between. As comparison, welders and office workers as control group were investigated. Health investigations comprised of surveys, lung function tests, antioxidant activity and vascular inflammation as well as renal- and hepatic function analysis. AM operators had significantly reduced nickel levels in blood (10.8 vs 6.2 nmol/L) as well as improved lung function (80 vs 92% of predicted) from year 1 to year 2. This is in line with previously published results displaying reduced exposure. Blood cobalt and nickel levels correlated with previously reported urinary levels, while blood chromium did not. Multivariate modelling showed that blood cobalt, antioxidant/inflammatory marker serum amyloid A1/serum paraoxonase/arylesterase 1 activity and the hepatic markers aspartate transaminase, alanine transaminase, and alkaline phosphatase were higher in AM operators compared to controls. The study show that the selected clinical analyses could function as a complement to metal analyses in biological fluids when investigating exposure-related health effects in AM operators. However, validation in larger cohorts is necessary before more definite conclusions could be drawn.

The concentration of benzene, toluene, ethylbenzene, and xylene in ambient air of the gas stations in Iran: A systematic review and probabilistic health risk assessment.

Exposure to benzene, toluene, ethylbenzene, and xylene (BTEX) has been reported in gas stations. Exposure to BTEX can result in adverse health outcomes in workers such as cancer and neurological effects. The health risk assessments of exposure to BTEX could be useful in choosing suitable control measures. In this review, data from previous studies of gas station environments in Iran were collected from years 2000 to 2020. The health risk assessments were conducted through the estimation of cancer and noncancer risks using a Monte Carlo simulation based on the US Environmental Protection Agency method. The results showed that exposure to BTEX in some cities of Iran was greater than the occupational exposure limits. The results of cancer risk assessments demonstrated that cancer risk was not increased. However, results of noncancer risk assessments demonstrated that neurological toxicity from exposure to BTEX was significant in different cities of Iran. The health risk assessments indicated that workers at gas station are at health risk.

Assessment of work-related symptoms, perceived knowledge, and attitude among nail salon technicians.

OBJECTIVES: Beauty is a Lebanese stereotype, as Lebanese women often feel urged to decorate themselves. Recent studies have raised concerns about nail salon technicians' (NSTs) health and safety issues. The aim of our study was to evaluate the occupational symptoms reported by NSTs, to assess their knowledge and document their awareness regarding hazardous chemicals found in nail cosmetics. METHODS: NSTs completed a researcher-administered questionnaire. Data were gathered on sociodemographic characteristics, perceived knowledge, and safety issues. Work-related symptoms reported by NSTs were evaluated, and their responses were compared to those of the office employees. RESULTS: A total of 120 NSTs and 120 office employees were interviewed. Compared to the control group, NSTs reported a higher prevalence of work-related respiratory, dermal, and irritative symptoms, all significantly associated with smoking and a poor ventilation system. In addition, musculoskeletal complaints were common among NSTs and significantly linked to a poor ventilation system, an increased number of customers per day, and a longer service duration. Furthermore, a longer career duration was significantly associated with an increased prevalence of irritative symptoms. When a binary logistic regression was carried out, it demonstrated a 25 times higher prevalence of work-related symptoms among NSTs compared to the office employees. Interestingly, 84% of the respondents had an inaccurate knowledge of nail cosmetics' risks with their educational level acting as key factor. CONCLUSIONS: Based on these findings, it is warranted to perform a clinical assessment, implement a stringent regulatory framework, and improve knowledge toward nail cosmetics' risk.

Development of a Web-Based Tool for Risk Assessment and Exposure Control Planning of Silica-Producing Tasks in the Construction Sector.

We describe the development and implementation of a novel, on-line risk assessment tool for respirable crystalline silica (RCS) exposure for use in the construction sector. It was motivated by the introduction of new OHS regulation in British Columbia that allowed for the substitution of exposure measurement data with "objective air monitoring data" collected at "equivalent work operations." This allowance encouraged the introduction of quantitative risk assessment in a notoriously challenging work environment but it was concluded that without assistance, the typical construction employer would struggle to identify, extract, and interpret validate objective data. The tool described here was based on a continually-updatable RCS exposure database, and a predictive regression model based on the database to generate exposure risk estimates. The model was embedded in an adaptive web-based application that can be run on common platforms. The design followed standard web conventions and features so that no specialized training is required for its use. It was designed to be usable by end-users with varying expertise, including non-OHS experts. Users describe the RCS-dust generating task they will perform, and associated control measures. The tool estimates both uncontrolled and controlled task-based exposure concentrations. Using additional information entered by the user, the on-line tool generates an "exposure control plan" or ECP, a legally regulated document for those undertaking work potentially exposing workers to RCS particulate. The development of the tool was a community-based, tri-partite effort of the local OHS regulator, construction employers, and exposure scientists. In addition to being a practical risk assessment tool, the designers wanted it to function as an educational tool, and that it should explore novel methods for exposure data collection and use. The strengths of this approach include the publicly shared updateable database that encourages continuous improvement and illustrates best practices; and the timely and cost effective collection and sharing of exposure data in a value-added manner. It is however limited to a single task per ECP, and only considers exposure to task operators, and not adjacent workers. Currently in BC, users generate up to 3,900 ECP's per year with the tool.

Assessment of Worker Exposure to Occupational Organic Dust in a Hemp Processing Facility.

The cultivation and processing of industrial hemp, Cannabis sativa L., is a developing industry in Australia. Exposure to hemp dust is demonstrated as producing reactive and respiratory health effects, potentially causing permanent lung disease or damage. The aim of this study was to assess the airborne organic dust concentrations generated in an Australian hemp processing facility. Personal sampling, in the breathing zone of exposed workers was undertaken for exposure to respirable dust, along with parallel static sampling for airborne concentrations of inhalable and respirable dust fractions. Both static and personal sampling showed that respirable dust concentrations (mg m-3) exceeded the Australian Institute of Occupational Hygienists (AIOH) recommended maximum exposure limit of 1 mg m-3 (respirable fraction) for dusts not otherwise specified, with mean exposures (mg m-3) of M = 1.33, standard deviation (SD) = 1.09 (range 0.07-3.67 mg m-3) and M = 4.49, SD = 4.49 (range 0.77-11.08 mg m-3). The results of the investigation indicate that workers in the hemp processing industry are at risk of developing permanent and disabling respiratory disease due to high dust exposure. There is no Australian occupational exposure limit specifically for hemp dust. It is recommended further research is needed and industry-specific guidance material or model code of practice developed to effectively control exposures.

Occupational Exposure to Flour Dust. Exposure Assessment and Effectiveness of Control Measures.

The adverse effects associated with exposure to flour dust have been known since the 1700s. The aim of the study was to assess the occupational exposure to flour dust in Italian facilities, identify the activities characterized by the highest exposure, and provide information to reduce workers' exposure. The study was performed in different facilities such as flourmills (n = 2), confectioneries (n = 2), bakeries (n = 24), and pizzerias (n = 2). Inhalable flour dust was assessed by personal and area samplings (n = 250) using IOM (Institute of Occupational Medicine) samplers. The results showed personal occupational exposure to flour dust over the American Conference of Governmental Industrial Hygiene (ACGIH) and the Scientific Committee on Occupational Exposure Limit (SCOEL) occupational limits (mean 1.987 mg/m3; range 0.093-14.055 mg/m3). The levels were significantly higher for dough makers in comparison to the dough formers and packaging area subjects. In four bakeries the industrial hygiene surveys were re-performed after some control measures, such as installation of a sleeve to the end of pipeline, a lid on the mixer tub or local exhaust ventilation system, were installed. The exposure levels were significantly lower than those measured before the introduction of control measures. The exposure level reduction was observed not only in the dough making area but also in all bakeries locals.

A case from India of pleural malignant mesothelioma probably due to domestic and environmental asbestos exposure: a posthumous report.

India is the largest consumer of asbestos in the world. There is no report from India of mesothelioma related to asbestos. The case is a 42-year-old man who died of pleural mesothelioma. He was exposed to asbestos domestically and from the environment since birth. Two of his close family members worked in a factory that used asbestos. The living quarter of the family was within the premises of the factory. Asbestos waste was strewn on the grounds surrounding the quarters. After decades of legal battles by workers and families exposed to asbestos, Indian courts have ordered remedial measures and compensation to people, who are exposed to asbestos at work and the environment. Mesothelioma, currently in epidemic proportions in the west where asbestos production was banned in the 1990s, could rise to alarming levels in the next decades in India if the legal remedial measures are not implemented soon.

Risk assessment of personal exposure to polycyclic aromatic hydrocarbons and aldehydes in three commercial cooking workplaces.

Cooking-related emissions are associated with environmental pollution and adverse health effects. Of the various chemical species emitted during cooking, polycyclic aromatic hydrocarbons (PAHs) and aldehydes are two chemical species with carcinogenic or tumor promoting characteristics. Although PAH exposure has been studied in commercial kitchen workers, few studies have investigated simultaneous exposure to PAHs and aldehydes in these workers. The aims of this study were to compare personal concentrations of PAH and aldehyde in three commercial cooking workplaces and to estimate their corresponding cancer risks. The three cooking workplaces included western fast food restaurant kitchens, Chinese cafeteria kitchens, and street food carts. Comparisons showed that workers in western fast food restaurant kitchens and Chinese cafeteria kitchens tended to have lower personal concentrations of these pollutants compared to workers in street food carts. The geometric mean (95% CI) cancer risks in the three workplaces were, from lowest to highest, 1.36 (1.12-1.67) × 10-5 for western fast food restaurant kitchens, 1.52 (1.01-2.28) × 10-5 for Chinese cafeteria kitchens, and 3.14 (2.45-4.01) × 10-5 for street food carts. The percentage contributions of aldehyde species to cancer risk were very high (74.9-99.7%). Street food cart workers had high personal exposure to aldehyde probably due to lack of effective exhaust systems. Thus, their cancer risk was significantly higher than those of workers in western fast food restaurant kitchens (p < 0.001) and Chinese cafeteria kitchens (p = 0.013).

Cancer risk assessment for occupational exposure to chromium and nickel in welding fumes from pipeline construction, pressure container manufacturing, and shipyard building in Taiwan.

OBJECTIVE: We assessed the cancer risks resulting from the exposure to chromium, hexavalent chromium (Cr (VI) ), oxidic nickel (Ni), and soluble Ni in welding fumes during pipeline and shipyard construction and pressure container manufacturing in Taiwan. We also determined the roles of welding performance and demographic characteristics during the exposure to Cr and Ni. METHODS: Personal air samples were collected for the analysis of Cr and Ni, and the concentrations of Cr (VI), oxidic Ni, and soluble Ni were quantified. We assessed cancer slope factors for Cr, Cr (VI), oxidic Ni, and soluble Ni, and we used the Incremental Lifetime Cancer Risk model proposed by the United States Environmental Protection Agency to calculate excess risk. RESULTS: The risks of exposure to Cr and Cr (VI) in welding fumes exceeded the acceptable level of occupational exposure (10-3). We ranked the excess cancer risk in three industries in decreasing order as follows: pipeline construction, shipyard construction, and pressure container manufacturing. The most sensitive parameters for the risk assessment were Cr and Ni concentrations. Statistically significant determinants of Cr (VI), oxidic Ni, and soluble Ni concentrations were the following: stainless steel as the base metal and the filler metals of shielded metal arc welding (SMAW) and of gas tungsten arc welding (GTAW). CONCLUSION: The study revealed that welders belong to a high cancer-risk group. Furthermore, we demonstrated the roles of filler metals and stainless steel in exposure to Cr and Ni.

Retrospective Assessment of Respirable Quartz Exposure for a Silicosis Study of the Industrial Sand Industry.

Background: In 2016, the OSHA PEL for crystalline silica was reduced, renewing interest in evaluating risk of silicosis from occupational exposures. The industrial sand industry, which deals with high-purity quartz sands, is the setting for a current epidemiologic investigation of silicosis risk and progression. In support of that investigation, respirable quartz (RQ) exposures were retrospectively estimated for 67 workers with silicosis and 167 matched control workers from 21 industrial sand plants, in which some started work as early as 1929. Methods: A job exposure matrix (JEM) was constructed by integrating a modern (post-1970) RQ exposure database containing more than 40000 measurements with archival particle count exposure data from a 1947 survey. A simulation algorithm was used to develop a conversion factor to convert the archival particle count data into modern measures of RQ by randomly generating 100000 virtual dust particles of varying diameters corresponding to the size distributions of 14 archival particle size distribution samples. The equivalent respirable mass and particle counts of the virtual particles were calculated, totalled, and ratioed to derive the conversion factor. The JEM was integrated with individual job histories to calculate average and cumulative exposure for each case and control. Multiple exposure estimates were derived for unprotected exposures as well as for exposures adjusted for estimated respiratory protective equipment use and efficiency. Results: The mean of the count to respirable mass conversion factors derived from 14 archival particle size samples was 157 µg m-3 per mppcf (SD: 42; range: 96-263) with no statistical difference across process areas (drying, screening, vibrating, binning, bulk loading, bagging), P = 0.29. The JEM demonstrated an industry-wide decrease in prevailing exposures to RQ of up to about 2 orders of magnitude from the distant (1929) to the recent (2012) past. Unadjusted cumulative exposures for cases and controls were statistically different (P < 0.001) with respective medians (range) of 3764 µg m-3 year (221-25121) and 1595 µg m-3 year (0-16446). Adjustment of exposure for use of respiratory protection showed modest reductions in estimated exposure: median adjusted cumulative exposures assuming a protection factor of 5 were 86% and 77% of the unadjusted values for cases and controls, respectively. Conclusions: The industrial sand industry offers a unique setting for examination of silicosis risk because of the high silica content of industrial sand and a long history of radiographic silicosis surveillance of industry workers. However, the great majority of silicosis cases in this industry are found among former workers and are associated with exposures occurring in the distant past, which necessitates extensive retrospective exposure assessment and increases the likelihood of exposure misclassification. Nonetheless, the estimated cumulative exposures for silicosis cases and controls in this work were significantly different, with the median cumulative exposure for cases being more than twice that of their matched controls.

Surgical smoke: Risk assessment and mitigation strategies.

BACKGROUND: Although many dermatologic surgeons are aware of the risks of surgical smoke, many do not use hazard reduction strategies. OBJECTIVE: To identify the infectious, inhalational, chemical, and mutagenic risks of surgical smoke in dermatologic procedures and suggest evidence-based hazard reduction strategies. METHODS: A review of articles indexed for MEDLINE on PubMed using the keywords surgical smoke, dermatology, surgical mask, respirator, smoke evacuator, and guidelines in 13 combinations was performed by using Preferred Reporting Items for Systematic Reviews and Meta-Analyses protocols. The review included data from 45 articles from the dermatology, surgery, infectious disease, obstetrics, and cancer biology literature. RESULTS: There are risks associated with surgical smoke, and although some dermatologists are aware of these risks, many are not using hazard reduction strategies such as smoke evacuators and surgical masks. LIMITATIONS: Most of the data regarding the hazards of surgical smoke and methods for smoke safety are derived from in vitro and in vivo studies in nonhumans, as well as from resources outside of the dermatology literature. CONCLUSION: Standardized guidelines for surgical smoke safety should be implemented in the dermatology community and residency curriculum.

Biomarkers of early genotoxicity and oxidative stress for occupational risk assessment of exposure to styrene in the fibreglass reinforced plastic industry.

This study aimed to identify sensitive and not-invasive biomarkers of early genotoxic/oxidative effect for exposure to styrene in the fibreglass reinforced plastic manufacture. We studied 11 workers of a plastic manufacture using open molding process (A), 16 workers of a manufacture using closed process (B) and 12 controls. We evaluated geno/cytotoxic effects on buccal cells by Buccal Micronucleus Cytome (BMCyt) assay and genotoxic/oxidative effects on lymphocytes by Fpg-comet test. On A workers we also evaluated urinary 8oxoGua, 8oxodGuo and 8oxoGuo to investigate oxidative stress. Personal inhalation exposure to styrene was monitored by passive air sampling and GC/MS. Biological monitoring included urinary metabolites mandelic acid (MA) and phenylglyoxylic acid (PGA). The findings show higher styrene exposure, urinary MA + PGA levels and micronucleus frequency in manufacture A. Higher buccal karyolytic cell frequency vs controls were found in both exposed populations. We found in exposed workers, no induction of direct DNA damage but oxidative DNA damage. Fpg-comet assay and urinary oxidized guanine seem to be sensitive biomarkers of oxidative stress and BMCyt assay a good-not invasive biomarker of cyto-genotoxicity at target organ. The study, although limited by the small number of studied subjects, shows the usefulness of used biomarkers in risk assessment of styrene-exposed workers.

Assessment of polycyclic aromatic hydrocarbon exposure, lung function, systemic inflammation, and genotoxicity in peripheral blood mononuclear cells from firefighters before and after a work shift.

Firefighting is regarded as possibly carcinogenic, although there are few mechanistic studies on genotoxicity in humans. We investigated exposure to polycyclic aromatic hydrocarbons (PAH), lung function, systemic inflammation and genotoxicity in peripheral blood mononuclear cells (PBMC) of 22 professional firefighters before and after a 24-h work shift. Exposure was assessed by measurements of particulate matter (PM), PAH levels on skin, urinary 1-hydroxypyrene (1-OHP) and self-reported participation in fire extinguishing activities. PM measurements indicated that use of personal protective equipment (PPE) effectively prevented inhalation exposure, but exposure to PM occurred when the environment was perceived as safe and the self-contained breathing apparatuses were removed. The level of PAH on skin and urinary 1-OHP concentration were similar before and after the work shift, irrespective of self-reported participation in fire extinction activities. Post-shift, the subjects had reduced levels of oxidatively damaged DNA in PBMC, and increased plasma concentration of vascular cell adhesion molecule 1 (VCAM-1). The subjects reporting participation in fire extinction activities during the work shift had a slightly decreased lung function, increased plasma concentration of VCAM-1, and reduced levels of oxidatively damaged DNA in PBMC. Our results suggest that the firefighters were not exposed to PM while using PPE, but exposure occurred when PPE was not used. The work shift was not associated with increased levels of genotoxicity. Increased levels of VCAM-1 in plasma were observed. Environ. Mol. Mutagen. 59:539-548, 2018. © 2018 Wiley Periodicals, Inc.