Assessment of adverse effects of olive mill waste water and olive mill waste contaminated soil on springtail Folsomia candida.

In recent years significant attention has been given to the problem of olive mill waste towards the environment. Still, there is a considerable gap in the knowledge of the impact of the olive mill wastewater (OMWW) and the olive mill waste contaminated soil (OMW CS) on non-target soil organisms. Springtails, as an important group of non-target soil organisms, are frequently used in ecotoxicological research. However, information on olive mill waste impact on the model species Folsomia candida is scarce. Therefore, in this study, we determined the effects of OMWW and OMW CS on survival, reproduction, neurotoxicity, oxidative stress, and available energy in springtail F. candida. The exposure to different ratios of OMWW and OMW CS showed higher toxicity of OMW CS in terms of survival (LC50 = 32.34% of OMWW; LC50 = 45.36% of OMW CS) and reproduction (EC50 = 10.10% of OMWW; EC50 = 19.44% of OMW CS). Furthermore, neurotoxicity (AChE induction), oxidative stress (SOD, GST, and MDA induction), and changes in available energy (decrease in lipid and carbohydrate content) have been observed. Those negative effects are likely consequences of the high phenol content specific to OMWW and OMW CS. Obtained results indicate that for the ecotoxicological assessment of various wastes it is essential to consider different tier level biomarkers to have a clear insight into the mechanism of action.

Impact assessment of bioaugmented tannery effluent discharge on the microbiota of water bodies.

Effluents are commonly discharged into water bodies, and in order for the process to be as environmentally sound as possible, the potential effects on native water communities must be assessed alongside the quality parameters of the effluents themselves. In the present work, changes in the bacterial diversity of streamwater receiving a tannery effluent were monitored by high-throughput MiSeq sequencing. Physico-chemical and microbiological parameters and acute toxicity were also evaluated through different bioassays. After the discharge of treated effluents that had been either naturally attenuated or bioaugmented, bacterial diversity decreased immediately in the streamwater samples, as evidenced by the over-representation of taxa such as Brachymonas, Arcobacter, Marinobacterium, Myroides, Paludibacter and Acinetobacter, typically found in tannery effluents. However, there were no remarkable changes in diversity over time (after 1 day). In terms of the physico-chemical and microbiological parameters analyzed, chemical oxygen demand and total bacterial count increased in response to discharge of the treated effluents. No lethal effects were observed in Lactuca sativa L. seeds or Rhinella arenarum embryos exposed to the streamwater that had received the treated effluents. All of these results contribute to the growing knowledge about the environmental safety of effluent discharge procedures.

Impact assessment of legacy wastes from ancient mining activities on current earthworm community.

Mineral resource exploitation by human societies throughout history led to the deposit of mining and smelting wastes and the subsequent contamination of surrounding soils by trace metals. After several centuries, the impact of these legacy hazardous wastes may remain a cause of environmental concern, especially for indigenous soil invertebrate populations such as earthworms. Therefore, we conducted a passive biomonitoring campaign in a former metallurgical district (Vosges Mountains, eastern France). According to community descriptors, we evidenced a significant decrease of anecic and endogeic earthworm density in the former mining stations. To link these results to soil contamination and bioaccumulation levels in earthworm tissues, we propose an original modelling approach using nonlinear mixed-effects regression models. Beyond a dose-response relationship between metal internal concentrations and their levels in soils, we highlighted contrasted behaviors according to ecological groups (epianecics and endogeics most impacted). We interpreted these results in relation to some eco-physiological features without completely exclude the influence of textural characteristics of soil, especially for deep-burrowing species such as anecic strict. Nonetheless, the presence of earthworm populations currently living in highly contaminated sites and handling elevated internal concentrations raises the question of the acquisition of genetic adaptive traits and the trophic transfers of metals.

Assessment of the genotoxic potential of water courses impacted by wastewater treatment effluents using micronucleus assay in plants from the species Tradescantia.

Water pollution and the increase in genotoxic consequences in aquatic environments are well documented indicating the necessity and importance of biomonitoring programs. The objective of the present study was to determine the environmental quality of water resources and genotoxic potential of materials present within water samples obtained from the Perdizes River and the Mumbuca Stream, located in a region of discharge of wastewater treatment effluents using Tradescantia micronucleus assay (Trad - MCN). Water samples were collected from different locations up and downstream of the wastewater treatment plant during rainy season and subsequently submitted to physico-chemical analysis and Trad-MCN bioassay. The spatial distribution of the physico-chemical parameters assessed suggested that discharges of wastewater treatment effluents reduced water quality at all sites examined. Further, exposure to wastewater treatment effluents produced genotoxic effects on tetrads of Tradescantia pallida. These results reinforce the sensitivity of the Trad-MCN bioassay and its potential application in water quality monitoring programs concomitant with physicochemical evaluation.

Antibiotic-manufacturing sites are hot-spots for the release and spread of antibiotic resistance genes and mobile genetic elements in receiving aquatic environments.

High antibiotic releases from manufacturing facilities have been identified as a risk factor for antibiotic resistance development in bacterial pathogens. However, the role of antibiotic pollution in selection and transferability of antibiotic resistance genes (ARGs) is still limited. In this study, we analyzed effluents from azithromycin-synthesis and veterinary-drug formulation facilities as well as sediments from receiving river and creek taken at the effluent discharge sites, upstream and downstream of discharge. Culturing showed that the effluent discharge significantly increased the proportion of antibiotic resistant bacteria in exposed sediments compared to the upstream ones. Quantitative real-time PCR revealed that effluents from both industries contained high and similar relative abundances of resistance genes [sul1, sul2, qacE/qacEΔ1, tet(A)], class 1 integrons (intI1) and IncP-1 plasmids (korB). Consequently, these genes significantly increased in relative abundances in receiving sediments, with more pronounced effects being observed for river than for creek sediments due to lower background levels of the investigated genes in the river. In addition, effluent discharge considerably increased transfer frequencies of captured ARGs from exposed sediments into Escherichia coli CV601 recipient as shown by biparental mating experiments. Most plasmids exogenously captured from effluent and polluted sediments belonged to the broad host range IncP-1ε plasmid group, conferred multiple antibiotic resistance and harbored class 1 integrons. Discharge of pharmaceutical waste from antibiotic manufacturing sites thus poses a risk for development and dissemination of multi-resistant bacteria, including pathogens.

Occurrence of plastic additives in outdoor air particulate matters from two industrial parks of Tarragona, Spain: Human inhalation intake risk assessment.

Plastic additives include several kinds of chemicals that are added to the polymer matrix to improve the final product quality and prevent deterioration effects. They are used in a large quantity of materials, so their presence in the environment is expected. This study has developed and validated a method based on gas chromatography-mass spectrometry after pressurised liquid extraction to determine sixteen plastic additives including UV-stabilizers, aromatic and phenolic antioxidants and some of their degradation products in particulate matter (PM10) from outdoor air. Apparent recoveries were above 85% for most of compounds and low detection limits (pg m-3) were achieved. This is the first study to determine these types of contaminant in the PM10 of outdoor air from two locations surrounded by different industries. Various compounds were found in almost all samples; BHT, BHT-Q, 2,4-DTBP, BHT-CHO, UV320, UV328, Irgafos168 and Iragonx1076, with concentrations ranging from < MQL to 2860 pg m-3. Estimated daily intakes (EDIs) via ambient inhalation were calculated for each polymer additive and for different subpopulation groups classified by age. Two possible exposure scenarios (low, based on geometric mean, and high, 95th percentile) were simulated, and 0.51 ng kgbw-1 day-1 was the EDI in the worst case scenario for children.

Environmental and health impacts of industrial wastewater effluents in Pakistan: a review.

In developing countries, one of the most severe modern-day dilemmas is the management of industrial wastewater. In these countries, industrial wastewater effluents are directly discharged into the natural drain, a sewer system, an internal septic tank or a nearby field. Some of these industrial wastewater effluents are inadequately treated or untreated before being discharged. In recent years, in developing countries, urbanization and industrial activities have led to environmental deterioration. This paper was designed to review the health and environmental impacts of inadequately treated or untreated industrial wastewater effluents in Pakistan. The quality of industrial wastewater effluents is responsible for the degradation of the receiving water bodies. This is due to the reason that inadequately treated or untreated industrial wastewater effluents may cause eutrophication in the receiving water bodies and also form a favorable condition for toxin-producing waterborne pathogens. In order to comply with the wastewater guidelines and legislations, there is a need for proper treatment before discharge. In order to minimize the risk to the environment and public health, there is a need for proper treatment processes for industrial wastewater effluents. To achieve unpolluted discharge of industrial wastewater into the receiving water bodies, regular monitoring, proper and suitable treatment, careful planning and appropriate legislation are recommended.

Phthalate pollution driven by the industrial plastics market: a case study of the plastic market in Yuyao City, China.

In attempts to evaluate the environmental risk produced by plastic markets, the levels and congener profiles of phthalate esters (PAEs) in soil, vegetable, and sediment samples collected from the plastic market in China, where numerous plastic products are exchanged every year, were investigated. The concentrations of ∑22PAEs ranged from 2131 to 27,805 ng g-1 in agricultural soils, from 8023 to 37,556 ng g-1 in vegetables and from 9031 to 87,329 ng g-1 in sediments. The predominant PAE pollutants were di-(2-ethylhexyl) phthalate (DEHP), di-n-butyl phthalate (DnBP), di-isobutyl phthalate (DiBP), and dibenzyl phthalate (DBzP). The mean percentages of the predominant PAEs in the soil, vegetable, and sediment samples accounted for 98.4%, 97.3%, and 99.5% of the total PAEs, respectively. The concentrations of PAEs at the sites around the plastic market were significantly higher than those at other pollution sites, such as sites contaminated by agricultural plastic film, electronic waste (e-waste) recycling sites, and industrial parks, indicating that the plastic market was an important pollution source. The DEHP concentrations in the soils, vegetables, and sediments and the DnBP concentrations in the vegetables all exceeded the environmental risk levels (ERL) or the environmental allowable levels (EAL), indicating that the plastic market posed potential environmental risks.

Cardiorenal Effects of Pharmaceutical Plant Effluent in Mice (Mus musculus).

Many pharmaceutical industries carelessly handle their effluents and indiscriminately release same to aquatic environment. These effluents often find their ways into surface and ground waters, contaminating public water and thus, serving as a potential threat to animals and human health. In this study, we investigated the cardiorenal effects of chronic oral exposure to pharmaceutical effluent in mice. Thirty male mice (Mus musculus) were randomly divided into groups A-F and treated with 0.2 mLs 0.0 %, 2.5 %, 5.0%, 10.0%, 20.0% and 40% concentration (v/v, effluent/distilled water) of the effluent for 28 days, respectively. At the end of the experiment, the animals were sacrificed by cervical dislocation. Activities of alanine aminotransferase (ALT), aspartate aminotransferase (AST) and alkaline phosphatase (ALP) were determined in serum and heart homogenate, while uric acid, creatinine and electrolytes (sodium, potassium, bicarbonate and chloride ions) were determined in serum only. Data were expressed as Means ± standard error of mean and values were considered significant at p < 0.05. Results showed that, oral exposure to pharmaceutical effluent reduced (p < 0.05) cardiac ALP, AST and ALT activities as well as serum ALT activity. However, serum activities of ALP, creatinine and uric acid were elevated (p < 0.05). Similarly, there was derangement of electrolytes (potassium, chloride, bicarbonate and sodium ions) in the exposed mice, compared with control. This study has demonstrated that poorly treated pharmaceutical effluent disrupted cardiac and serum enzyme activities, caused electrolytes imbalance and elevated serum uric acid level, suggesting that, drinking water contaminated with pharmaceutical effluent may impair kidney and cardiac functions. Further study, investigating the histology of the kidney and heart of the pharmaceutical effluent-exposed animals as well as mechanism(s) of cardiorenal toxicity of the effluent, should be carried out to exploit its roles in pathogenesis of cardiorenal diseases.

Toxicity of wine effluents and assessment of a depuration system for their control: assay with tadpoles of Rhinella arenarum (BUFONIDAE).

We evaluated the toxicity of the winery effluent and the efficiency of a symbiotic depuration system by means an experiment with Rhinella arenarum tadpoles. The studied effluent was taken from warehouses during the cleaning season. These effluents subsequently subjected to the purification treatment under evaluation. The effluent samples differentiated into two treatment levels: "raw" where the effluent was evaluated with field conditions and "treated" where the effluent was previously filtered with the symbiotic depuration system. The results of the bioassays compared with the physicochemical parameters determined in the effluent samples. The lethal response had a clear-cut correspondence with the effluent quality assessed utilizing physicochemical parameters. In all cases, dilution of the samples resulted in a significant reduction of their toxicity. It concluded that (a) winery effluents could be harmful to tadpoles of R. arenarum, (b) the symbiotic purification system used to treat wine effluents it would produce a significant reduction in the contaminant levels of the effluent. However, this reduction in contaminant levels does not provide sufficient safety for the release of the effluents into the environment.

Ecotoxicological risk assessment of contaminated soil from a complex of ceramic industries using earthworm Eisenia fetida.

The aim of this study was to determine ecotoxicological parameters for biomonitoring of environmental risk of native soils from a ceramic industrial area that had been contaminated with cadmium (Cd) and chromium (Cr) by using the earthworm, Eisenia fetida. Initially, lab tests were conducted to compare earthworm (Eisenia fetida) growth, survival, morphology, behavior, and reproduction rates following exposure to six concentrations of contaminated soil at 0%, 6.25%, 12.5%, 25%, 50%, or 100% mixed in artificial soil and cow dung following a 28-d incubation period. The second experiment consisted of utilizing Eisenia fetida in a predetermined lowest observed effect concentration to measure heavy metals bioaccumulation from superficial soil collected from a ceramic industrial area following a 56-d exposure. Data demonstrated that in the lab earthworms maintained at 6.25% of contaminated soil, exhibited significant increase in mean weight, bioaccumulation of Cd and Cr associated with a significant decrease in the amount of Cd and Cr in the soil. At field testing, similar results that were observed as in the lab as evidenced by rise in mean weight, higher levels of Cd and Cr in the earthworm tissue accompanied by significant fall in soil levels of Cd and Cr. In conclusion, at tested relevant environmental concentrations, the use of Eisenia fetida for assessing ecotoxicological risk arising from contaminated soil due to ceramic industrial pollutant emissions was found to be an effective tool for biomonitoring program.

Toxicity assessment of untreated/treated electroplating sludge using human and plant bioassay.

The purpose of this work was to assess the risk to the environment arising from the electroplating sludge from both chemical and toxicological point of view. Both approaches were used for the assessment of the treatment efficiency which consisted of CaO based solidification followed by thermal treatment at 400°C. The elemental composition was determined in the bulk samples and the leachates of untreated sludge. The toxicity of the leachate was determined using two human colorectal adenocarcinoma cell lines (Caco-2 and SW 480) and Hordeum vulgare L. based plant bioassay. The same toxicity tests were employed to the leachate of the treated sludge. Untreated sludge showed extremely high cytotoxic effect to both human and plant bio-system in dose-dependent manner. The percentages higher than 0.5% and 0.05% of the leachate caused significant cytotoxic effect on Caco-2 and SW 480 cells, respectively. The percentages of the leachate higher than 0.05% also showed significant toxic effect to H. vulgare L. bio-system with complete arrest of seed germination following the treatment with 100% to 5% of the leachate. The leachate of the treated sludge showed no toxicity to any of the test systems confirming the efficiency and justification of the employed procedures for the detoxification of electroplating sludge.

Antinutritional factors and hypocholesterolemic effect of wild apricot kernel (Prunus armeniaca L.) as affected by detoxification.

The present investigation was aimed to study the effect of detoxification on the nutrients and antinutrients of wild apricot kernel followed by its hypocholesterolemic effect in male Wistar albino rats. The results revealed a non-significant (p > 0.05) effect of detoxification on the proximate composition except total carbohydrates and protein content. However, detoxification led to a significant (p < 0.05) decrease in l-ascorbic acid (76.82%), ß-carotene (25.90%), dietary fiber constituents (10.51-28.92%), minerals (4.76-31.08%) and antinutritional factors (23.92-77.05%) (phenolics, tannins, trypsin inhibitor activity, saponins, phytic acid, alkaloids, flavonoids, oxalates) along with the complete removal (100%) of bitter and potentially toxic hydrocyanic acid (HCN). The quality parameters of kernel oil indicated no adverse effects of detoxification on free fatty acids, lipase activity, acid value and peroxide value, which remained well below the maximum permissible limit. Blood lipid profile demonstrated that the detoxified apricot kernel group exhibited significantly (p < 0.05) increased levels of HDL-cholesterol (48.79%) and triglycerides (15.09%), and decreased levels of total blood cholesterol (6.99%), LDL-C (22.95%) and VLDL-C (7.90%) compared to that of the raw (untreated) kernel group. Overall, it can be concluded that wild apricot kernel flour could be detoxified efficiently by employing a simple, safe, domestic and cost-effective method, which further has the potential for formulating protein supplements and value-added food products.

Functional metagenomics reveals a novel carbapenem-hydrolyzing mobile beta-lactamase from Indian river sediments contaminated with antibiotic production waste.

Evolution has provided environmental bacteria with a plethora of genes that give resistance to antibiotic compounds. Under anthropogenic selection pressures, some of these genes are believed to be recruited over time into pathogens by horizontal gene transfer. River sediment polluted with fluoroquinolones and other drugs discharged from bulk drug production in India constitute an environment with unprecedented, long-term antibiotic selection pressures. It is therefore plausible that previously unknown resistance genes have evolved and/or are promoted here. In order to search for novel resistance genes, we therefore analyzed such river sediments by a functional metagenomics approach. DNA fragments providing resistance to different antibiotics in E. coli were sequenced using Sanger and PacBio RSII platforms. We recaptured the majority of known antibiotic resistance genes previously identified by open shot-gun metagenomics sequencing of the same samples. In addition, seven novel resistance gene candidates (six beta-lactamases and one amikacin resistance gene) were identified. Two class A beta-lactamases, blaRSA1 and blaRSA2, were phylogenetically close to clinically important ESBLs like blaGES, blaBEL and blaL2, and were further characterized for their substrate spectra. The blaRSA1 protein, encoded as an integron gene cassette, efficiently hydrolysed penicillins, first generation cephalosporins and cefotaxime, while blaRSA2 was an inducible class A beta-lactamase, capable of hydrolyzing carbapenems albeit with limited efficiency, similar to the L2 beta-lactamase from Stenotrophomonas maltophilia. All detected novel genes were associated with plasmid mobilization proteins, integrons, and/or other resistance genes, suggesting a potential for mobility. This study provides insight into a resistome shaped by an exceptionally strong and long-term antibiotic selection pressure. An improved knowledge of mobilized resistance factors in the external environment may make us better prepared for the resistance challenges that we may face in clinics in the future.

Interaction, transformation and toxicity assessment of particles and additives used in the semiconducting industry.

Chemical mechanical planarization (CMP) is a widely used technique for the manufacturing of integrated circuit chips in the semiconductor industry. The process generates large amounts of waste containing engineered particles, chemical additives, and chemo-mechanically removed compounds. The environmental and health effects associated with the release of CMP materials are largely unknown and have recently become of significant concern. Using a zebrafish embryo assay, we established toxicity profiles of individual CMP particle abrasives (SiO2 and CeO2), chemical additives (hydrogen peroxide, proline, glycine, nicotinic acid, and benzotriazole), as well as three model representative slurries and their resulting waste. These materials were characterized before and after use in a typical CMP process in order to assess changes that may affect their toxicological profile and alter their surface chemistry due to polishing. Toxicity outcome in zebrafish is discussed in relation with the physicochemical characteristics of the abrasive particles and with the type and concentration profile of the slurry components pre and post-polishing, as well as the interactions between particle abrasives and additives. This work provides toxicological information of realistic CMP slurries and their polishing waste, and can be used as a guideline to predict the impact of these materials in the environment.

[Excess deaths for haematological tumours in Falconara Marittima (Marche Region, Central Italy): short story from the epidemiological survey up to now]. / EPICHANGE/3. Eccesso di morti per tumori ematologici a Falconara Marittima: breve storia dall'indagine epidemiologica a oggi.

API is a company refining petroleum products located in Falconara Marittima (Ancona Province, Marche Region, Central Italy). Thanks to the pressure made by citizens' committees, which considered the plant as a risk source for the population residing in the surroundings municipalities, Marche Region as institution asked for an epidemiological survey. This survey found a significative excess in deaths for haematological tumours in women and in a sub-group of retired and elderly. The results were published in one report and two scientific journals, and were also presented during a public meeting. It was urgent to made public health intervention, which were called for, but up to now nothing has been done. Here, the reconstruction of this affair, from the start of the epidemiological survey up to the more recent development in terms of public health.

[The opponent you do not just imagine. The case of Falconara Marittima (Marche Region, Central Italy)]. / EPICHANGE/2. L'avversario che non ti aspetti. Il caso di Falconara Marittima.

Falconara Marittima (Marche Region, Central Italy) is declared to be an area at high risk of environmental crisis, due to the presence of a refinery plant. In 2004, Marche Region funded an epidemiological survey to assess atmospheric risks linked to the refinery. This survey was conducted by the Italian National Cancer Institute of Milan, and citizens actively contributed. An excess for leukaemias and an increase in non-Hodgkin lymphomas were showed. These results were confirmed also by the Regional Environmental Protection Agency and the Regional Health Authority. But Marche Region and the Municipalities chose to not report the situation: the same Institutions, which at the beginning sided the citizens, became an opponent for health protection.

Toxicity assessment of carbon black waste: A by-product from oil refineries.

In Singapore, approximately 30t/day of carbon-based solid waste are produced from petrochemical processes. This carbon black waste has been shown to possess physical properties that are characteristic of a good adsorbent such as high external surface area. Therefore, there is a growing interest to reutilize and process this carbon black waste into secondary materials such as adsorbents. However, the carbon black waste obtained from petrochemical industries may contain heavy metals that are hazardous to human health and the environment, hence restricting its full potential for re-utilization. Therefore, it is important to examine the possible toxicity effects and toxicity mechanism of carbon black waste on human health. In this study, inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis showed that the heavy metals, vanadium (V), molybdenum (Mo) and nickel (Ni), were present in the carbon black waste in high concentrations. Three human cell lines (HepG2 cells, MRC-5 cells and MDA-MB-231 cells) were used to investigate the toxicity of carbon black waste extract in a variety of in vitro assays. Results from MTS assays indicated that carbon black waste extract decreased the viability of all three cell lines in a dose and time-dependent manner. Observations from confocal microscopy further confirmed this phenomenon. Flow cytometry assay also showed that carbon black waste extract induced apoptosis of human cell lines, and the level of apoptosis increased with increasing waste concentration. Results from reactive oxygen species (ROS) assay indicated that carbon black waste extract induced oxidative stress by increasing intracellular ROS generation in these three human cell lines. Moreover, induction of oxidative damage in these cells was also observed through the alteration of glutathione (GSH) and superoxide dismutase (SOD) activities. Last but not least, by treating the cells with V-spiked solution of concentration equivalent to that found in the carbon black waste extract, V was identified as the main culprit for the high toxicity of carbon black waste extract. These findings could potentially provide insight into the hazards of carbon black waste extract and its toxicity mechanism on human cell lines.

Assessment of phytotoxicity grade during composting based on EEM/PARAFAC combined with projection pursuit regression.

Improper treatment of organic waste may result in environmental pollution and harm to plant growth due to the high concentration of phytotoxin. Composting has widely been used for recycling organic waste and reducing phytotoxin to improve soil properties. Assessing the phytotoxicity grades of compost products is essential for achieving high quality compost to guarantee its marketability. In this study, a technique combined parallel factor (PARAFAC) of excitation-emission matrices (EEMs) spectroscopy with projection pursuit regression (PPR) was applied to improve the sensitivity of phytotoxicity assessment during composting. Results showed that composting reduced the concentration of phytotoxin, and increased the germination index (GI). Composts were divided into four grades based on GI values. Five components containing simple DOM (component C1 and C2) and complex DOM (component C3-C5) were successfully developed by PARAFAC. Correlation analysis between phytotoxicity, chemical indices and fluorescence components demonstrated that C1, C4, complex DOM, and the ratio of simple/complex DOM components were more suitable to assess phytotoxicity of composting products. These results revealed that PARAFAC/PPR enabled a rapid and accurate method to assess the phytotoxicity of compost materials for composting plant.

Socioeconomic Drivers of PM2.5 in the Accumulation Phase of Air Pollution Episodes in the Yangtze River Delta of China.

Recent studies in PM2.5 sources show that anthropogenic emissions are the main contributors to haze pollution. Due to their essential roles in establishing policies for improving air quality, socioeconomic drivers of PM2.5 levels have attracted increasing attention. Unlike previous studies focusing on the annual PM2.5 concentration (Cyear), this paper focuses on the accumulation phase of PM2.5 during the pollution episode (PMAE) in the Yangtze River Delta in China. This paper mainly explores the spatial variations of PMAE and its links to the socioeconomic factors using a geographical detector and simple linear regression. The results indicated that PM2.5 was more likely to accumulate in more developed cities, such as Nanjing and Shanghai. Compared with Cyear, PMAE was more sensitive to socioeconomic impacts. Among the twelve indicators chosen for this study, population density was an especially critical factor that could affect the accumulation of PM2.5 dramatically and accounted for the regional difference. A 1% increase in population density could cause a 0.167% rise in the maximal increment and a 0.214% rise in the daily increase rate of PM2.5. Additionally, industry, energy consumption, and vehicles were also significantly associated with PM2.5 accumulation. These conclusions could serve to remediate the severe PM2.5 pollution in China.