The Assessment of Resin-Based Composite Sealants' Effectiveness in Arresting Non-Cavitated Dentin Carious Lesions (ICDAS 3)-A 12 Month Follow-Up Preliminary Study.

Background and Objectives: The therapeutic management of carious lesions remains a significant focus for researchers, given their persistently high prevalence despite being largely preventable. This study aimed to compare the effectiveness of a composite resin-based sealant material in halting extended non-cavitated dentin carious lesions when used therapeutically versus preventively on caries-free teeth over a period of twelve months. Materials and Methods: out of the 236 children examined, 45 were excluded from the study due to non-compliance with the inclusion criteria. Thus, the study included 191 children aged 10-12 years, and 764 molars in total. Results: among these molars, 171 were caries-free (ICDAS II code 0), forming the Control group, while 180 molars were classified with an ICDAS II score of 3, forming the Study group. All molars were sealed and evaluated at 6- and 12-month follow-up intervals. Both intervals revealed statistically significant differences (p < 0.05) in sealant retention and carious lesion development between sound (ICDAS code 0) and decayed (ICDAS code 3) teeth. Conclusions: the findings did not support the effectiveness of sealants in halting non-cavitated dentin carious lesions classified as ICDAS II with code 3 compared to their preventive application in sound teeth classified as ICDAS II with code 0.

Spectrophotometric assessment of the color stability of composite resins polished with different techniques.

This study aimed to use spectrophotometry to assess the color stability of composite resins polished with different polishing techniques and scanning electron microscopy (SEM) to evaluate the surface micromorphology of the specimens. In this in vitro experimental study, a total of 96 disc-shaped specimens were fabricated from microfilled (Renamel Microfill, shade SB3) and nanohybrid (Estelite Sigma Quick, shade BW) composite resins in bright white shades (n = 48). Each group was randomized into 1 control and 2 experimental subgroups (n = 16): no polishing (control), polishing with aluminum oxide discs (experimental), or polishing with diamond-impregnated spiral wheels (experimental). In each subgroup, half of the specimens were immersed in a coffee solution and the other half in a tea solution for 48 hours after finishing (control) or polishing (experimental). Spectrophotometry was used to measure the color of the specimens at baseline, after finishing, after polishing (experimental groups only), and after immersion in tea and coffee. The surface micromorphology of a randomly selected specimen from each subgroup was assessed under SEM. The color change (ΔE*) of the specimens between measurements was calculated and analyzed using 1-way, 2-way, and 3-way analyses of variance (ANOVAs) and the Tukey test. Both tea and coffee caused significant color change in the composite resin specimens, with specimens immersed in coffee undergoing significantly greater color change than those immersed in tea (P < 0.001; 2-way ANOVA). The nanohybrid composite specimens polished with polishing discs had a significantly greater color change than nanohybrid specimens polished with spiral wheels (P = 0.041). The Tukey test revealed that there was no overall significant difference between the 2 polishing techniques (P = 0.505), but both of these subgroups exhibited a significantly lower color change than the control group (P < 0.001). In general, SEM did not reveal substantial differences between the 2 polishing techniques, but specimens polished by spiral wheels appeared to have a smoother surface. All polished specimens demonstrated clinically acceptable mean color change values (ΔE* < 3.5). The type of coloring agent had a greater effect on color stability than either the polishing technique or type of composite resin, with coffee causing a greater color change than tea.

12 Month's Assessment Of Clinical Efficacy Of Resin Modified Glass Ionomer Cement And Flowable Composites In Restoration Of Non-Carious Cervical Lesions, A Randomized Clinical Trial.

Background: The objective of this study was to compare the clinical efficacy of Resin modified glass ionomer cement and Flowable composite in terms of retention, marginal adaptation and surface texture using United States Public Health Service criteria in non-carious cervical lesions measured over a period of one year. Methods: A Randomized Clinical Trial is conducted with Informed consent on 60 patients who are randomly allocated into 2 groups with at least 2 Non Carious Cervical Lesions in each. Group 1 is used for Flowable Composite while group 2 is used for resin modified glass ionomer cement. A recall is maintained to draw conclusions between two materials in terms of occurrence of marginal adaptation, retention and surface texture, to show which material is superior to other. Results: Out of 30 restorations in 12 months follow up, only 19 found to be present in flowable composite group while in resin modified glass ionomer cement group, 28 are retained. Regarding margin integrity, Group 1 showed 21 intact margins whereas 23 margins were intact in group 2, while 18 and 25 showed smooth surface in flowable composite and Resin modified glass ionomer cement group respectively, on exploration. Conclusion: It can be concluded from our study that Resin modified glass ionomer cement is superior to Flowable composite in terms of retention (p=0.005) and surface texture (p=0.045) in restoration of non carious cervical lesion.

Development and Assessment of Bioactive Coatings for the Prevention of Recurrent Caries Around Resin Composite Restorations.

OBJECTIVE: To develop hydrophilic resin-based surface coatings containing bioactive agents (proanthocyanidins from Vitis vinifera and calcium silicate) and assess their protective role at the dentin and enamel margins of cervical restorations against demineralization under simulated conditions of high and low caries activity. METHODS: Suboptimal resin composite restorations were placed on cervical cavity preparations on buccal and lingual surfaces of thirty-two molars after a contamination protocol. Groups were divided according to the resin-based coatings (n=8): resin without bioactive (C), resin containing 2% enriched Vitis Vinifera (VVE), and resin coat containing 10% calcium silicate (CaSi). The control group did not receive a resin (NC). To simulate a hydrolyticenzymatic degradation, specimens were subjected to 2-month storage followed by incubation in esterase at 37°C for 8 days. Afterwards, recurrent caries was induced using a pH-proteolytic model on half of the specimens to simulate high caries activity, and the other half remained in simulated body fluid (SBF). Measurements of cross-section microhardness (KHN) and infiltration with rhodamine-B assessed the micropermeability (MP), the extent of demineralization (ED), and the demineralization area (DA). Data were analyzed using analysis of variance (ANOVA) and post-hoc tests (α=0.05). RESULTS: VVE and CaSi presented higher cross-sectional KHN values for enamel and dentin (p<0.001). The bioactive coatings resulted in lower MP, ED, and DA compared to NC (p<0.005) in enamel and dentin. CaSi coating preserved the enamel from demineralization (p=0.160). CONCLUSION: The application of bioactive coatings represents a potential strategy to protect the enamel-dentin margins of resin restorations.

COMPARATIVE ASSESSMENT OF NOVEL 3D PRINTED RESIN CROWNS VERSUS DIRECT CELLULOID CROWNS IN RESTORING PULP TREATED PRIMARY MOLARS.

PURPOSE: The primary objective of this randomized controlled trial is to compare the clinical impact of using crowns manufactured by 3D printing and direct composite celluloid crowns as a final restoration for primary molars after pulpotomy procedures. MATERIAL AND METHODS: Fifty primary molars selected from the children needing treatment at the Pediatric Dentistry Clinic at Damascus University Faculty of Dentistry were randomized by using SPSS and divided into 2 groups based on fabricating methods: Group A: 3D-printed crowns with the utilization of biocompatible light-curing composite, and Group B: Crowns were made directly using composite carried out by prefabricated celluloid crown. The evaluation team assessed the crowns in each group using the United States Public Health Service (USPHS) criteria for retention, marginal integrity, and gingival health at baseline, followed by 3 follow-up sessions at 3, 6, and 12 months. RESULTS: Chi-Square statistical testing was accomplished using SPSS software to compare crown failure among the experimental group. At the 12-month follow-up, no statistically significant differences were noted between groups (P = .157). For gingival health assessment, the Mann-Whitney test was used. No statistically significant differences were recorded between the 2 groups in the third follow-up month (P = .058); However, a significant difference was noted in the 6th and 12th follow-up months (P = .023, P = .000). For marginal integrity comparison, Mann-Whitney statistical Test was used for the third, sixth, and twelfth-month follow-up sessions. A significant difference was noted in all follow-up periods (3-6-12 months) between the direct and indirect crowns (P = .025, P = .025, P = .002, respectively). CONCLUSION: The 2 types of experimental crowns (direct composite celluloid crowns and the resin crowns manufactured via 3D printer) were suitable esthetic alternatives for restoring pulp-treated primary molars with a notably higher rate of retention with direct composite crowns. 3D-printed resin crowns, however, portrayed superior gingival health in addition to greater marginal integrity.

Clinical and OCT assessment of application modes of a universal adhesive in a 12-month RCT.

OBJECTIVES: To evaluate a universal adhesive clinically using FDI criteria and by optical coherence tomography (OCT). METHODS: In 50 patients, three or four non-carious cervical lesions (NCCL) were restored with composite (Venus® Diamond Flow, Kulzer) using iBond® Universal (iBU, Kulzer) applied in self-etch (iBU-SE, n = 50), selective-enamel-etch (iBU-SEE, n = 29) or etch-and-rinse mode (iBU-ER, n = 50) and the reference OptiBond™ FL (OFL, Kerr, n = 50). Restorations were imaged by SD-OCT. The weighted mean length of interfacial adhesive defects (AD, %) was quantified per restoration immediately after placement (t0), simultaneously with clinical assessment (FDI criteria) after 14 days (t1), 6 (t2) and 12 months (t3). Data were statistically analyzed (McNemar-/Wilcoxon-/Mann-Whitney-U test (α = 0.05), Kaplan-Meier survival curves). RESULTS: After 12 months, cumulative failure rates were lower with iBU-SE (0.0%; p = 0.016), iBU-SEE (0.0%; p = 0.125), and iBU-ER (2.1%; p = 0.070; loss t3) compared to OFL (16.7%; losses t2, t3). Generally, marginal adaptation decreased (pi < 0.001) and marginal staining increased (pi ≤ 0.031), without significant group differences (pi > 0.064). AD increased in all groups (pi < 0.001). At enamel, AD appeared more extended with iBU-SE vs. iBU-SEE (t2-t3; pi ≤ 0.005), iBU-ER (t1-t3; pi ≤ 0.051) and OFL (t0-t3; pi ≤ 0.018). At dentin/cement iBU generally caused fewer defects than OFL (t1-t3; pi ≤ 0.010) and with SE vs. ER (t2-t3; pi = 0.010). CONCLUSIONS: In NCCLs, iBU generally provides a more durable bond than OFL. Recommended mode is SEE. Clinic and OCT provided comparable results. OCT has higher statistical power, shows group differences earlier and specifically for the different hard tooth tissues. CLINICAL SIGNIFICANCE: The universal adhesive iBU was superior against the reference OFL in NCCLs. It can be recommended with SEE. Evaluation of interfacial adhesive defects by OCT seems to allow early prediction of adhesives' clinical performance.

Skin color affect the replacement of amalgam for composite in posterior restorations: a birth-cohort study.

The aim of present study was to estimate the occurrence and associated factors for replacement of amalgam posterior restorations. A representative sample of all 5,914 births from the 1982 in Pelotas birth cohort study was prospectively investigated, and the posterior restorations were assessed at 24 (n = 720) and 31 years of age (n = 539). Individual-level variables, i.e., demographic characteristics, socio-economic factors, oral health conditions and use of dental services, were collected from different waves of the cohort. Tooth-level variables included dental group, estimated time in mouth of each amalgam restoration, and number of restored dental surfaces. Thus, 246 individuals presented 718 amalgam restorations at 24 years of age. After 7 seven years of follow-up, 18.9% of these restorations had been replaced with composite resins. Multilevel Poisson regression models showed that, compared to white individuals, blacks presented a lower risk of replacement of amalgam restorations for composite resins (IRR - 0.39 [0.16-0.95]). Individuals with high educational level at age 31 showed an increased likelihood of replacement of amalgam restorations. Therefore, skin color affects the replacement of amalgam for composite resin in posterior restorations.

Assessment of a conservative approach for restoration of extensively destroyed posterior teeth.

OBJECTIVE: Extensive restorations in posterior teeth always bring doubts to the clinicians regarding the best protocol, mainly when structures of reinforcement were lost. OBJECTIVE: This study aimed to evaluate the effect of beveling on the fracture resistance and pattern of class II (MOD) restored teeth. METHODOLOGY: Ninety human premolars were randomly assigned into 9 groups: CTR (control/sound); NC (cavity preparation, non-restored); RU (restored, unbeveled); RTB (restored, entire angle beveling); RPB (restored, partial/occlusal beveling); EC (endodontic access/EA, non-restored); EU (EA, unbeveled); ETB (EA, entire angle beveling); EPB (EA, partial/occlusal beveling). Teeth were restored with Esthet X resin composite and stored in distilled water for 24 h before the inclusion in PVC cylinders. The axial loading tests were performed with 500 kgF at 0.5 mm/min crosshead speed until fracture of the specimens. Fracture resistance and pattern were accessed and data were analyzed using one-way ANOVA and Tukey's HSD test (α=0.05). RESULTS: Mean (±SD) failure loads ranged from 136.56 (11.62) to 174.04 (43.5) kgF in the groups tested without endodontic access. For endodontically accessed teeth, fracture resistance ranged from 95.54 (13.05) to 126.51 (19.88) kgF. Beveling of the cavosurface angle promoted the highest fracture resistance values (p<0.05) and prevented catastrophic fractures. CONCLUSIONS: Cavosurface angle beveling is capable of improving fracture resistance and pattern for both endodonticaly accessed and non-accessed teeth.

Adaptation Assessment of Three Bonded Resin Restorations at the Cavity Floor Using Cross-Polarization Optical Coherence Tomography.

Objective: The aim of the study was to compare the composite adaptation of three systems by using cross-polarization optical coherence tomography (CP-OCT). Background data: Most polymer-based restorations suffer from polymerization shrinkage that affects the interfacial seal. This shrinkage cannot be detected by conventional X-ray methods. Optical coherence tomography was proved to be a reliable non-invasive imaging tool to examine biological structures and biomaterials at micron scale. Methods: Twenty-four cylindrical class-V cavities were prepared on the buccal surfaces of the extracted human molars. After cavity preparation, samples were randomly divided into three groups (n = 8) according to the restoration system: one-step self-etch Clearfil Tri-S Bond Plus with Clearfil Majesty ES-2 composite (TS; Kuraray Noritake Dental), Single Bond Universal in self-etch mode with Filtek Z350 XT composite (SB; 3M ESPE), and one-step self-etch Plafique Bond with Plafique LX 5 composite (PB; Tokuyama Dental). The restoration placement was carried out according to the manufacturers' recommendations. Later, the specimens were immersed in a contrasting agent; then, image acquisitions were taken by CP-OCT to calculate the adaptation percentage by using an image analysis software. Results: Mann-Whitney U test showed no statistical significant difference in the adaptation percentage between TS (91.72 ± 11.6) and SB (93.43 ± 6.9) groups (p > 0.05). However, the adaptation percentage in PB (41.83 ± 28.5) was significantly lower than in the other tested groups (p < 0.05). Conclusions: Within the limitation of the study, TS and SB groups showed better adaptation than PB. Moreover, CP-OCT is a useful imaging tool that can display composite adaptation at micron scale.

Skin color affect the replacement of amalgam for composite in posterior restorations: a birth-cohort study

Abstract The aim of present study was to estimate the occurrence and associated factors for replacement of amalgam posterior restorations. A representative sample of all 5,914 births from the 1982 in Pelotas birth cohort study was prospectively investigated, and the posterior restorations were assessed at 24 (n = 720) and 31 years of age (n = 539). Individual-level variables, i.e., demographic characteristics, socio-economic factors, oral health conditions and use of dental services, were collected from different waves of the cohort. Tooth-level variables included dental group, estimated time in mouth of each amalgam restoration, and number of restored dental surfaces. Thus, 246 individuals presented 718 amalgam restorations at 24 years of age. After 7 seven years of follow-up, 18.9% of these restorations had been replaced with composite resins. Multilevel Poisson regression models showed that, compared to white individuals, blacks presented a lower risk of replacement of amalgam restorations for composite resins (IRR - 0.39 [0.16-0.95]). Individuals with high educational level at age 31 showed an increased likelihood of replacement of amalgam restorations. Therefore, skin color affects the replacement of amalgam for composite resin in posterior restorations.

Assessment of a conservative approach for restoration of extensively destroyed posterior teeth

Abstract Extensive restorations in posterior teeth always bring doubts to the clinicians regarding the best protocol, mainly when structures of reinforcement were lost. Objective This study aimed to evaluate the effect of beveling on the fracture resistance and pattern of class II (MOD) restored teeth. Methodology Ninety human premolars were randomly assigned into 9 groups: CTR (control/sound); NC (cavity preparation, non-restored); RU (restored, unbeveled); RTB (restored, entire angle beveling); RPB (restored, partial/occlusal beveling); EC (endodontic access/EA, non-restored); EU (EA, unbeveled); ETB (EA, entire angle beveling); EPB (EA, partial/occlusal beveling). Teeth were restored with Esthet X resin composite and stored in distilled water for 24 h before the inclusion in PVC cylinders. The axial loading tests were performed with 500 kgF at 0.5 mm/min crosshead speed until fracture of the specimens. Fracture resistance and pattern were accessed and data were analyzed using one-way ANOVA and Tukey's HSD test (α=0.05). Results Mean (±SD) failure loads ranged from 136.56 (11.62) to 174.04 (43.5) kgF in the groups tested without endodontic access. For endodontically accessed teeth, fracture resistance ranged from 95.54 (13.05) to 126.51 (19.88) kgF. Beveling of the cavosurface angle promoted the highest fracture resistance values (p<0.05) and prevented catastrophic fractures. Conclusions Cavosurface angle beveling is capable of improving fracture resistance and pattern for both endodonticaly accessed and non-accessed teeth.

Assessment of Fracture Resistance Capacity of Different Core Materials with Porcelain Fused to Metal Crown: An in vitro Study.

Aim: The aim of the study was to evaluate the capacity to resist fracture in different core buildup materials with porcelain fused to metal (PFM) crown. Materials and methods: Totally, 45 mandibular single rooted first premolars were collected, which were sound along with similar shape and size. The teeth were sectioned at 15 mm above the root apex sparing the sound tooth structure. The teeth were endodontically treated with the crown-down technique using nickel-titanium (NiTi) instrumentation. The specimens were randomized into three groups as per the core materials used and were labeled accordingly. Group I consisted of dual-cured composite resin, group II consisted of glass ionomer reinforced with resin, and group III consisted of Miracle mix. Universal loading machine is used for measuring the compres-sive load applied to fracture the tooth. Results: The mean value of compressive strength was maximum in the dual cured composite resin (598.42 ± 22.64) followed by glass ionomer reinforced with resin (478.88 ± 26.74) and Miracle mix (442.16 ± 30.10). The results showed a significant difference statistically within the core materials used with p < 0.05. The results from the Tukey's post hoc test of multiple comparisons between dual-cured composite resin vs glass ionomer reinforced with resin, dual-cured composite resin vs Miracle mix, and glass ionomer reinforced with resin vs Miracle mix showed a highly statistical difference with p < 0.05, which is significant. Conclusion: This in vitro study showed that the dual-cured composite resin had maximum resistance to fracture compared with other core buildup materials on teeth which were endodonti-cally treated. Clinical significance: Restoration of a tooth which is structurally compromised is a tricky job for all the dentists. Restoring it with a proper core buildup material with adequate fracture resistance makes the tooth structure stable. The core material should be able to resist all types of occlusal forces and to distribute it equally within the tooth structure. Keywords: Core buildup, Crowns, Endodontically treated teeth, Fracture resistance.

Clinical assessment of class II resin-based composites versus preformed metal crowns performed on primary molars in patients at high risk of caries.

AIM: To compare class II resin composite with preformed metal crowns (PMC) in the treatment of proximal dentinal caries in high caries-risk patients. METHODS: The charts (270) of paediatric patients with proximal caries of their primary molars were reviewed. Success or failure of a procedure was assessed using the dental notes. Survival analysis was used to calculate the mean survival time (MST) for both procedures. The influence of variables on the mean survival time was investigated. RESULTS: A total of 593 class II resin composites and 243 PMCs were placed in patients ranging between 4-13 years of age. The failure percentage of class II resin composites was 22.6% with the majority having been due to recurrent caries, while the failure percentage of PMCs was 15.2% with the majority due to loss of the crown. There was no significant difference between the MST of class II resin composites and PMCs, 41.3 and 45.6 months respectively (p value = 0.06). In class II resin composites, mesial restorations were associated with lower MST compared to distal restorations (p-value < 0.001). CONCLUSIONS: The MST of resin composites and PMCs were comparable when performed on high caries-risk patients.

Treating High-Caries Risk Occlusal Surfaces in First Permanent Molars through Sealants and Supervised Toothbrushing: A 3-Year Cost-Effective Analysis.

We conducted a 3-year cost-effectiveness analysis on the cavitated dentine carious lesion preventive capabilities of composite resin (CR) (reference group) and atraumatic restorative treatment (ART) high-viscosity glass-ionomer cement (HVGIC) sealants compared to supervised toothbrushing (STB) in high-risk first permanent molars. School children aged 6-7 years in 6 schools (2 per group) received CR and ART/HVGIC sealants or STB daily for 180 days each school year. Data were collected prospectively and cost estimates were made for sample data and a projection of 1,000 sealants/STB high-risk permanent molars. Although STB had the best outcome, its high implementation cost (95% of cost for supervisors visiting schools 180 days/school year) affected the results. ART/HVGIC was cost-effective compared to CR for the sample data (savings of USD 37 per cavitated dentine carious lesion prevented), while CR was cost-effective compared to ART/HVGIC for the projection (savings of USD 17 per cavitated dentine carious lesion prevented), and both were cost-saving compared to STB. Two STB scenarios were tested in sensitivity analyses with variations in caries incidence and number of supervision days; results showed STB had lower costs and higher savings per cavitated dentine carious lesion prevented than CR and ART/HVGIC. A major assumption is that both scenarios have the same high effectiveness rate experienced by STB under study conditions; however, they point to the value of further research on the benefits of adopting STB as a long-term venture in a general population of school children.

Extensive Assessment of the Physical, Mechanical, and Adhesion Behavior of a Low-viscosity Bulk Fill Composite and a Traditional Resin Composite in Tooth Cavities.

OBJECTIVES: To compare the degree of conversion (DC), depth of polymerization (DP), shrinkage stress (SS), flexural strength (FS), elastic modulus (EM), and bond strength (BS) of a low-viscosity bulk fill resin composite and a paste-like traditional composite. METHODS: Tetric Evo-Flow Bulk Fill (TBF) and Empress Direct (ED; Ivoclar Vivadent) composites were used. DC (%) and FS/EM (MPa/GPa) were evaluated in bar specimens (7×2×1 mm; n=10) using Fourier-transform infrared spectroscopy and a three-point bending test in a universal testing machine (UTM), respectively. For DP and BS tests, conical cavities (n=10) were prepared in bovine dentin and restored with the composites. DP was analyzed by calculating the bottom-to-top surface microhardness ratio (BTHR), and BS (MPa) was determined by push-out testing in the UTM. SS (MPa) was measured for one increment of TBF and two increments of ED in a UTM attached to an extensometer (n=5). Data were analyzed using Student t-test and analysis of variance (α=0.05). RESULTS: TBF presented higher values than ED for DC (85.7±6.6% vs 54.2±4.9%) and BS (0.95±0.70 MPa vs 0.35±0.15 MPa). TBF values were lower than ED values for FS (76.6±16.8 MPa vs 144.9±24.1 MPa) and maximum SS (0.77±0.07 MPa vs 1.07±0.15 MPa). TBF and ED values were similar for BTHR (0.83±0.16 vs 0.84±0.08) and EM (11.5±2.8 GPa vs 12.5±2.6 GPa). CONCLUSIONS: The physical and mechanical properties of TBF, a bulk fill resin composite, were similar or superior to those of ED, a conventional composite, with the exception of FS measurements.

Efficacy of conventional treatment with composite resin and atraumatic restorative treatment in posterior primary teeth: study protocol for a randomised controlled trial.

INTRODUCTION: Despite the widespread acceptance of conventional treatment using composite resin in primary teeth, there is limited evidence that this approach is the best option in paediatric clinics. Atraumatic restorative treatment (ART) using high-viscosity glass ionomer cement has gradually become more popular because it performs well in clinical studies, is easy to handle and is patient friendly. Therefore, the aim of this randomised clinical trial study is to compare the restoration longevity of conventional treatment using composite resin with that of ART in posterior primary teeth. As secondary outcomes, cost-efficacy and patient self-reported discomfort will also be tested. METHODS AND ANALYSIS: Children aged 3-6 years presenting with at least one occlusal and/or occlusal-proximal cavity will be randomly assigned to one of two groups according to the dental treatment: ART (experimental group) or composite resin restoration (control group). The dental treatment will be performed at a dental care trailer located in an educational complex in Barueri/SP, Brazil. The unit of randomisation will be the child. A sample size of 240 teeth with occlusal cavities and 188 teeth with occlusal-proximal cavities has been calculated. The primary outcome will be restoration longevity, which will be clinically assessed after 6, 12, 18 and 24 months by two examiners. The duration of the dental treatment and the cost of all materials used will be considered when estimating the cost-efficacy of each treatment. Individual discomfort will be measured after each dental procedure using the Facial Scale of Wong-Baker. ETHICS AND DISSEMINATION: This clinical trial was approved by the local ethics committee from the Faculty of Dentistry of the University of São Paulo (registration no. 1.556.018). Participants will be included after their legal guardians have signed an informed consent form containing detailed information about the research. TRIAL REGISTRATION NUMBER: www.clinicaltrials.gov, NCT02562456; Pre-results.

3-year survival rates of retained composite resin and ART sealants using two assessment criteria.

The aim was to test the null-hypothesis that there is no difference in the cumulative survival rate of retained composite resin (CR) sealants and a high-viscosity glass-ionomer Atraumatic Restorative Treatment (ART) sealant in first permanent molars calculated according to the traditional and the modified retention assessment criteria over a period of 3 years. This cluster-randomized controlled clinical trial consisted of 123 schoolchildren, 6-7-years-old. At baseline, high-caries risk pits and fissures of fully erupted first permanent molars were treated with CR and ART sealants. Evaluations were performed after 0.5, 1, 2 and 3 years. Retention was scored for free-smooth surface and for each of three sections into which the occlusal surface had been divided. The modified criterion differed from the traditional in that it determined an occlusal sealant to be a failure when at least one section contained no visible sealant material. Data were analysed according to the PHREG model with frailty correction, Wald-test, ANOVA and t-test, using the Jackknife procedure. The cumulative survival rates for retained CR and ART sealants in free-smooth and occlusal surfaces for both criteria were not statistically significantly different over the 3 years. A higher percentage of retained CR sealants on occlusal surfaces was observed at longer evaluations. Cumulative survival rates were statistically significantly lower for the modified criterion in comparison to the traditional. The modified retention assessment criterion should be used in future sealant-retention studies.

Assessment of enamel cracks at adhesive cavosurface margin using three-dimensional swept-source optical coherence tomography.

OBJECTIVES: Swept-source optical coherence tomography (SS-OCT) can construct cross-sectional images of internal biological structures. The aim of this study was to evaluate enamel cracks at the cavosurface margin of composite restorations using SS-OCT. METHODS: Bowl-shaped cavities were prepared at two locations (mid-coronal and cervical regions) on the enamel surface of 60 bovine teeth. Half of the cavities (30) were treated with phosphoric acid gel. A two-step self-etch adhesive (Clearfil SE Bond) was applied to all cavities and a flowable composite was placed in bulk. After 7days in water at 37°C, three-dimensional (3D) images of the specimens were obtained using SS-OCT, and cross-sectional views of the cavosurface margin were examined. Presence and extent of enamel cracks along the cavosurface margin circumference were evaluated using a 5-point scale. The results were statistically compared with Wilcoxon rank sum test with Bonferroni correction. RESULTS: 3D SS-OCT could detect enamel cracks at the cavosurface margin of composite restorations. Cervical regions caused more enamel cracking than mid-coronal regions. Phosphoric acid etching increased the incidence of enamel cracks compared with the preparations without etching. CONCLUSION: SS-OCT can be used to detect enamel cracks at the margins of composite restorations noninvasively. Presence and extent of enamel cracks depended on the enamel region and bonding protocol. CLINICAL SIGNIFICANCE: SS-OCT can be used to detect enamel cracks at the margins of composite restorations noninvasively. Selective phosphoric acid etching of the enamel significantly increased the incidence of marginal cracks, especially in cervical preparation.

3-year survival rates of retained composite resin and ART sealants using two assessment criteria

Abstract The aim was to test the null-hypothesis that there is no difference in the cumulative survival rate of retained composite resin (CR) sealants and a high-viscosity glass-ionomer Atraumatic Restorative Treatment (ART) sealant in first permanent molars calculated according to the traditional and the modified retention assessment criteria over a period of 3 years. This cluster-randomized controlled clinical trial consisted of 123 schoolchildren, 6–7-years-old. At baseline, high-caries risk pits and fissures of fully erupted first permanent molars were treated with CR and ART sealants. Evaluations were performed after 0.5, 1, 2 and 3 years. Retention was scored for free-smooth surface and for each of three sections into which the occlusal surface had been divided. The modified criterion differed from the traditional in that it determined an occlusal sealant to be a failure when at least one section contained no visible sealant material. Data were analysed according to the PHREG model with frailty correction, Wald-test, ANOVA and t-test, using the Jackknife procedure. The cumulative survival rates for retained CR and ART sealants in free-smooth and occlusal surfaces for both criteria were not statistically significantly different over the 3 years. A higher percentage of retained CR sealants on occlusal surfaces was observed at longer evaluations. Cumulative survival rates were statistically significantly lower for the modified criterion in comparison to the traditional. The modified retention assessment criterion should be used in future sealant-retention studies.

An experimental in vivo procedure for the standardised assessment of sealants retention over time.

AIM: The elaboration of an experimental system to obtain reproducible and comparable photographs of the occlusal surface to monitor sealants retention. MATERIALS AND METHODS: An intraoral camera connected to a computer was used to obtain photos of the occlusal surfaces. A specific software was utilized to perform measurements on archived pictures. An experimental two-part system, consisting of a dental arch support and a camera support, connected to each other through holes and pins, was made to obtain a standardised and reproducible placement of the camera in the mouth. In the first part, to test the degree of reliability of the procedure and the percentage of image distortion, 120 first molars were sealed and for each molar ten photographs were taken, using the intraoral camera connected with the dental arch support, the camera support and the dedicated software. In the second part, 165 first molars were sealed and photographed, as above described, immediately after sealing (T0), 6 months (T1) and 1 year later (T2). With the software, the sealed areas were measured. The comparison of the selected sealed areas between T0 and T1, T0 and T2, T1 and T2 determined the percentage of sealant loss. RESULTS: In the first part, the experimental procedure showed a reliability of 96.85%. In the second part, the difference in the rate of lost sealant between T0-T1 and T1-T2 was statistically significant (p <0.001). STATISTICS: ANOVA analysis was made. CONCLUSIONS: Photographs, obtained through the experimental two-part system, allowing a reproducible positioning of the intraoral camera in oral cavity, could represent a standardised and useful method to monitor sealants retention over time.