An Overview of Spirits Made from Sugarcane Juice.

Among the family of sugarcane spirits, those made from juice are diverse and often produced in a traditional way. They must be distinguished from other sugarcane spirits, which are more widely produced and made from other sugarcane derivatives, such as molasses. These alcoholic beverages contribute significantly to the socio-economic development of many countries. However, despite ancestral know-how, there is a lack of contemporary data required to characterize some sugarcane juice spirits (SCJSs) and to overcome the current and future threats that producers will have to face. While preserving their authenticity and specificity, SCJS producers expect to improve and ensure sufficient yield and a superior quality product. Even if the scientific knowledge on these spirits is not comparable, the available data could help identify the critical points to be improved in the making process. This review aims to present the main SCJSs encountered worldwide, defining their specific features through some important aspects with, notably, references to the complex notion of terroir. To continue, we discuss the main steps of the SCJS process from harvesting to aging. Finally, we expose an inventory of SCJS's chemical compositions and of their sensory description that define the specific organoleptic properties of these spirits.

A fast and low-cost approach for the discrimination of commercial aged cachaças using synchronous fluorescence spectroscopy and multivariate classification.

BACKGROUND: Cachaça is the distilled beverage typical of Brazil and can be subjected to the aging process in wooden barrels. In addition to oak barrels, cachaça is also aged in barrels of different Brazilian native woods, resulting in a wide variety of its sensory characteristics. In this work, 172 cachaças aged in bálsamo, jequitibá, oak, and umburana barrels were analyzed by synchronous fluorescence spectroscopy and by the classification methods of principal component analysis and partial least squares discriminant analysis. Spectra were preprocessed by the first derivative by Savitzky-Golay smoothing, using a filter width and polynomial order determined through face-centered central composite designs. Multivariate analysis was realized using the spectra recorded at different wavelength differences, and models were compared by the classification errors in the test sets. RESULTS: The principal component analysis applied to the synchronous fluorescence spectra presented a tendency of separation by the wood used in the aging process, and the partial least squares discriminant analysis model constructed using the fluorescence spectra recorded at a wavelength difference of 30 nm provided better performance parameters (efficiency 91-97%, sensitivity 81-100%, and specificity 91-100%). CONCLUSION: Synchronous fluorescence spectroscopy offers a promising approach for the classification of cachaças aged in bálsamo, oak, jequitibá, and umburana barrels, and the discriminant model can be used for routine analysis as a screening method. © 2022 Society of Chemical Industry.

The Amine Functionalized Sugarcane Bagasse Biocomposites as Magnetically Adsorbent for Contaminants Removal in Aqueous Solution.

The method of solvothermal by one-step operation has been performed to synthesize of magnetic amine-functionalized sugarcane bagasse biocomposites (SB-MH). The obtained SB-MH contains 62.34% of Fe, 17.8 mmol/g of amine, and a magnetic property of 19.46 emu/g. The biocomposite surface area increased significantly from 1.617 to 25.789 m2/g after amine functionalization. The optimum condition of SB-MH used for Pb(II) ion removal was achieved at pH 5 for 360 min with adsorption capacity of 203.522 mg/g. The pseudo 2nd order was well-fitted to the model of Pb(II) ion adsorption. Meanwhile, other contaminant parameters number of Chemical Oxygen Demand (COD), Total Suspended Solid (TSS), and dye in wastewater were also remarkably reduced by about 74.4%, 88.0%, and 96.7%, respectively. The reusability of SB-MH with 4th repetitions showed only a slight decrease in performance of 5%. Therefore, the proposed magnetic amine-functionalized sugarcane bagasse biocomposites lead to a very potential adsorbent implemented in high scale due to high surface area, easy separation, stable materials and capability to adsorb contaminants from aqueous solution.

Impact of Alkaline Pretreatment Condition on Enzymatic Hydrolysis of Sugarcane Bagasse and Pretreatment Cost.

A combined severity factor (RCSF) which is usually used to evaluate the effectiveness of hydrothermal pretreatment at above 100 °C had been developed to assess the influence of temperature, time, and alkali loading on pretreatment and enzymatic hydrolysis of lignocellulose. It is not suitable for evaluating alkaline pretreatment effectiveness at lower than 100 °C. According to the reported deducing process, this study modified the expression of [Formula: see text] as [Formula: see text] which is easier and more reasonable to assess the effectiveness of alkaline pretreatment. It showed that RCSF exhibited linear trend with lignin removal, and quadratic curve relation with enzymatic hydrolysis efficiency (EHE) at the same temperature. The EHE of alkali-treated SCB could attain the maximum value at lower RCSF, which indicated that it was not necessary to continuously enhance strength of alkaline pretreatment for improving EHE. Within a certain temperature range, the alkali loading was more important than temperature and time to influence pretreatment effectiveness and EHE. Furthermore, the contribution of temperature, time, and alkali loading to pretreatment cost which was seldom concerned was investigated in this work. The alkali loading contributed more than 70% to the pretreatment cost. This study laid the foundation of further optimizing alkaline pretreatment to reduce cost for its practical application.

Simultaneous determination and risk assessment of fipronil and its metabolites in sugarcane, using GC-ECD and confirmation by GC-MS/MS.

A sensitive gas chromatographic method using a modified QuEChERS technique is reported for simultaneous determination, dissipation and risk assessment of fipronil and its metabolites in sugarcane and soil. Recoveries were 80.7-98.5% with precision within 1.4-16.5% estimated at the limits of detection (LOD) 0.0015-0.002 µg g-1 and limits of quantification (LOQ) 0.005 µg g-1. Fipronil dissipated with half-life (T1/2) of 2.8-4.3 days while for total fipronil it was 3.7-6.0 days following application of fipronil (5% SC) in sugarcane fields at recommended (100 g a.i. ha-1) and double the recommended (200 g a.i. ha-1) doses. Estimated pre-harvest intervals (PHI) for fipronil were 20.3-27.0 days in sugarcane plants, and for total fipronil the corresponding values were 28.2-37.8 days. No dietary risk was observed due to fipronil (RQd < 1) 5 days after application. Potential risk exists towards algae and soil macro-organism (RQs > 1), but for earthworms it was safe (RQs < 1).

Dissipation behavior of chlorpyrifos residues and risk assessment in sugarcane fields.

As chlorpyrifos is used globally to control pests in sugarcane fields, analysis of its residues on food crops is essential to assess product safety for humans. In this study, chlorpyrifos content in sugarcane plants, soil and juice was determined using a gas chromatography with an electron capture detector. The limit of quantification was 0.01 mg/kg for plant and soil, and 0.01 mg/L for juice. The degradation and residual risk in sugarcane fields after applying chlorpyrifos to two sample sites (Changsha and Danzhou, China) were assessed. Chlorpyrifos concentrations in plants and soil decreased rapidly over time, reaching a degradation rate ranging from 98.82 to 99.25% on day 35. The half-life of chlorpyrifos in both plants and soil was only 5.97-6.12 days. Regardless of application dosage (standard or high) at a pre-harvest interval of 60 days, chlorpyrifos was undetectable in the harvested sugarcane. Risk assessment indicated that chlorpyrifos residue in sugarcane did not pose a health risk to humans.

Alternative Low-Cost Additives to Improve the Saccharification of Lignocellulosic Biomass.

A potential strategy to mitigate problems related to unproductive adsorption of enzymes onto lignin during the saccharification of lignocellulosic biomass is the addition of lignin-blocking agents to the hydrolysis reaction medium. However, there is a clear need to find more cost-effective additives for use in large-scale processes. Here, selected alternative low-cost additives were evaluated in the saccharification of steam-exploded sugarcane bagasse using a commercial enzymatic cocktail. The addition of soybean protein, tryptone, peptone, and maize zein had positive effects on glucose release during the hydrolysis, with gains of up to 36% when 8% (w/w) soybean protein was used. These improvements were superior to those obtained using bovine serum albumin (BSA), a much more expensive protein that has been widely reported for such an application. Moreover, addition of soybean protein led to a saving of 48 h in the hydrolysis, corresponding to a 66% decrease in the reactor operation time required. In order to achieve the same hydrolysis yield without the soybean additive, the enzyme loading would need to be increased by 50%. FTIR spectroscopy and nitrogen elemental analysis revealed that the additives probably acted to reduce unproductive binding of cellulolytic enzymes onto the lignin portion of the sugarcane bagasse.

Ecotoxicological and microbiological assessment of sewage sludge associated with sugarcane bagasse.

Sewage sludge (SS) obtained after sewage treatment process may contain several toxic substances. Bioremediation can decrease the toxicity of the sludge, mainly when it is associated with stimulant agents, such as sugarcane bagasse (B). Samples of pure SS (SSP); SS+B; SS+Soil; and SS+B+Soil were bioremediated for 1, 3, and 6 months (T1, T2, and T3, respectively). After each period, the cytotoxic, genotoxic, and mutagenic potentials of the solid samples and their respective aqueous extracts (aqueous eluate and percolate water) were evaluated by the Allium cepa test. A microbiological analysis of the samples was also performed after each period tested. All solid samples of SS+B (in T1, T2, and T3) and the solid sample of SSP (treatment T3) showed a significant decrease of cell division (cytotoxic effects). The aqueous eluate extracts of SS+B (T1 and T3) and SSP (T2 and T3) induced cytotoxic effect. The solid sample of SS+B (T2 and T3) and aqueous extracts of SSP (T1) were genotoxic, indicating a harmful effect of SS on A. cepa, even after 6 months of bioremediation. There was an alternation in the microbial community both in diversity and in abundance, with the predominance of nonfermenting gram-negative bacilli. The tested bioremediation periods were not sufficient for the complete detoxification of SS, and the use of B did not seem to contribute to the degradation of the pollutants to inert compounds. These data emphasize that a specific relationship should exist between the sludge characteristic and the biostimulating agent used to promote a more efficient bioremediation. These results suggest the necessity to study longer periods of biodegradation and the use of other decomposing agents for greater safety and sustainability for the agricultural use of this residue.

Effect of dietary utilisation of sugarcane press mud on production performance of Muzaffarnagari lambs.

Sugarcane press mud (SPM) is one of the potential agro-industrial by-products available in India and research exploring its utilisation in small ruminant nutrition is scanty. In this direction, the present study evaluated the feasibility of dietary incorporation of SPM at different levels in a feeding trial lasting 180 days. A total of 21 Muzaffarnagari ram lambs were randomly distributed into three groups of seven each based on comparable body weight (11.70 ± 0.29 kg) and age (3-5 months) following a completely randomised design. The three dietary treatments were (1) SP0 (control), concentrate mixture without SPM; (2) SP10, concentrate mixture comprising 10% SPM and (3) SP20, concentrate mixture comprising 20% SPM on air-dry basis. The experimental lambs were offered weighed quantity of designated isonitrogenous (crude protein = 20.6%) and isoenergetic (metabolisable energy = 12.1 MJ/kg) concentrate mixture (coarse mash) and along with ad libitum wheat straw (threshed to 1-2-cm length) and a 9-day metabolism trial was conducted. Results revealed no significant (P > 0.05) differences in intake and digestibility of nutrients, nitrogen balance, nutritive value of diets, average daily gain, as well as feed conversion ratio among three groups. The serum concentration of triiodothyronine and tetraiodothyronine did not differ due to treatments. Likewise, wool yield and its quality, measured in terms of fibre diameter, medullation percentage and staple length were also comparable irrespective of dietary variation. Furthermore, the cost of concentrate mixture (Rs/day) was lower (P ≤ 0.05) in SP20 followed by SP10 as compared to group SP0. These findings suggested that SPM could be safely fed up to 20% level in the concentrate mixture for lambs substituting expensive traditional feed ingredients without negatively inflicting the performance of growing lambs.

Dissipation, occurrence and risk assessment of a phenylurea herbicide tebuthiuron in sugarcane and aquatic ecosystems in South China.

In this study, a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method coupled with UPLC-QqQ-MS/MS analysis was developed to detect tebuthiuron in sugarcane fields and the surrounding aquatic ecosystems. Methodological validation showed the method developed was of favorable sensitivity, reproducibility and accuracy. For assessment of its dietary and ecological risks, dissipation and occurrence of tebuthiuron in situ were further investigated through a supervised field trial and an aquatic environment monitoring carried out in six dominant sugarcane production regions in South China. After application at the range of recommended dose, tebuthiuron dominantly distributed in soil, and then dissipated in accordance with the first-order rate model with the half-lives of 12.2-21.5 d. At pre-harvest intervals (PHI), occurrence of tebuthiuron was found to be 0.718-1.366 mg/kg and 0.016-0.034 mg/kg, in sugarcane and soil, respectively. The supervised trials median residue (STMR) of tebuthiuron in sugarcane was thus 0.024 mg/kg and the dietary Risk Quotient (RQd) was accordingly calculated as 2.34 × 10-4, indicating safety on long-term consumption of sugarcane with tebuthiuron residues. Yet high risks of tebuthiuron towards soil ecosystems was noticed as it possessed maximum ecological Risk Quotient (RQe) at 1.97 to earthworms. In sugarcane field-surrounding aquatic environment, distribution of tebuthiuron was found to range from 0.007 mg/L to 0.022 mg/L, leading to high risk towards the aquatic ecosystem due to the maximum RQe at 440 to algae, irrespective of its low risks to invertebrate and fish. Taken together, our approach serve as an effective tool for monitoring residual tebuthiuron environmentally and also advance in-depth understanding of dietary and ecological risks posed by the phenylurea herbicide.

Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services.

International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions.

Expansion of sugarcane monoculture: associated impacts and management measures in the semi-arid East African Rift Valley, Ethiopia.

The study examined the expansion of sugarcane monoculture over the period 1957-2010 and its implications for land degradation and land management measures in the semi-arid northern Main Ethiopian Rift Valley. It used multi-scale and multi-temporal imageries aided by qualitative surveying to investigate the dynamics of land use and cover changes. The study applied both a pixel-based supervised classification and feature extraction methods at subclass levels and merged them into major compatible and comparable land use and cover groups. The results indicated a substantial transformation in the landscape over 53 years (1957-2010), which is attributed to expansion of sugarcane plantation, saline lake water, and smallholder farmland and settlements. The land use and cover changes culminated in reduction of native vegetation cover and biodiversity loss, encroachment of non-native species, and occurrence of soil salinity. Major causes that justify the changes include (1) macro-economic changes and policy shifts towards agricultural development, (2) change in underground hydrology, (3) population growth, and (4) sedentarization of the traditional pastoral community. Proper measures should aim at addressing the trade-off between economic development and environmental sustainability. Moreover, management opportunities should base on the understanding of socioeconomic and biophysical settings and balance the sustenance of the local people and ecological function of the area.

Synthesis and biocompatibility assessment of sugarcane bagasse-derived biogenic silica nanoparticles for biomedical applications.

Sugarcane bagasse is a fibrous material and an excellent bioresource for biogenic silica. Moreover, sugarcane bagasse has low production costs and is a sustainable precursor for the synthesis of biogenic silica nanoparticles (BSNPs). In this study, we synthesized BSNPs using sugarcane bagasse. The acid pretreatment of sugarcane was carried out in an autoclave, which eliminates metal ions and promotes the hydrolysis of organic substances. Residues of the acid pretreatment were incinerated at different temperatures to determine the role of temperature on the formation of BSNPs. The crystalline nature and morphology of the prepared BSNPs were analyzed using X-ray diffraction analysis and transmission electron microscopy. The X-ray diffraction analysis result indicates that the prepared BSNPs have an amorphous nature. Transmission electron microscopy images confirmed that the BSNPs have an irregular shape with a porous morphology. The biocompatibility of BSNPs was studied by assessing their effect on human lung fibroblast cell viability, morphology, mitochondrial function, reactive oxygen species, and gene expression. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays and microscopy studies suggested that BSNPs do not affect cell viability or morphology. BSNPs slightly affect the mitochondrial membrane potential at high doses. In addition, BSNPs decreased the percentage of human lung fibroblast cell in G1 and G2/M phases and increased the S population. These studies revealed that the BSNPs were biocompatible, indicating that they may be applicable for biomedical applications. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 340-349, 2017.

High-pressure carbon dioxide/water pre-treatment of sugarcane bagasse and elephant grass: Assessment of the effect of biomass composition on process efficiency.

The performance of two lignocellulosic biomasses was studied in high-pressure carbon dioxide/water pre-treatment. Sugarcane bagasse and elephant grass were used to produce C5-sugars from hemicellulose and, simultaneously, to promote cellulose digestibility for enzymatic saccharification. Different pre-treatment conditions, with combined severity factor ranging from -1.17 to -0.04, were evaluated and maximal total xylan to xylose yields of 59.2wt.% (34.4wt.% xylooligomers) and 46.4wt.% (34.9wt.% xylooligomers) were attained for sugarcane bagasse and elephant grass, respectively. Furthermore, pre-treated biomasses were highly digestible, with glucan to glucose yields of 77.2mol% and 72.4mol% for sugarcane bagasse and elephant grass, respectively. High-pressure carbon dioxide/water pre-treatment provides high total C5-sugars and glucose recovery from both lignocellulosic biomasses; however it is highly influenced by composition and intrinsic features of each biomass. The obtained results confirm this approach as an effective and greener alternative to conventional pre-treatment processes.

Production of poly(malic acid) from sugarcane juice in fermentation by Aureobasidium pullulans: Kinetics and process economics.

Poly(ß-l-malic acid) (PMA) is a biodegradable polymer with many potential biomedical applications. PMA can be readily hydrolyzed to malic acid (MA), which is widely used as an acidulant in foods and pharmaceuticals. PMA production from sucrose and sugarcane juice by Aureobasidium pullulans ZX-10 was studied in shake-flasks and bioreactors, confirming that sugarcane juice can be used as an economical substrate without any pretreatment or nutrients supplementation. A high PMA titer of 116.3g/L and yield of 0.41g/g were achieved in fed-batch fermentation. A high productivity of 0.66g/L·h was achieved in repeated-batch fermentation with cell recycle. These results compared favorably with those obtained from glucose and other biomass feedstocks. A process economic analysis showed that PMA could be produced from sugarcane juice at a cost of $1.33/kg, offering a cost-competitive bio-based PMA for industrial applications.

Mycotoxin Contamination in Sugarcane Grass and Juice: First Report on Detection of Multiple Mycotoxins and Exposure Assessment for Aflatoxins B1 and G1 in Humans.

This study was conducted to investigate the natural co-occurrence of multiple toxic fungal and bacterial metabolites in sugarcane grass and juice intended for human consumption in Upper Egypt. Quantification of the target analytes has been done using the "dilute and shoot" approach followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). A total number of 29 and 33 different metabolites were detected in 21 sugarcane grass and 40 juice samples, respectively, with a trend of concentrations being higher in grass than in juice. Among the regulated mycotoxins, only aflatoxin B1 (AFB1) and aflatoxin G1 (AFG1) were detected. The prevalence of AFB1 was in 48% of grass samples and in 58% of juice with a maximum concentration of 30.6 µg/kg and 2.10 µg/kg, respectively. AFG1 was detected in 10% of grass samples (7.76 µg/kg) and 18% of juice samples (34 µg/kg). Dietary exposure was assessed using a juice frequency questionnaire of adult inhabitants in Assiut City. The assessment revealed different levels of exposure to AFB1 between males and females in winter and summer seasons. The estimated seasonal exposure ranged from 0.20 to 0.40 ng/kg b.w./day in winter and from 0.38 to 0.90 ng/kg b.w./day in summer.

Soybean protein as a cost-effective lignin-blocking additive for the saccharification of sugarcane bagasse.

Addition of surfactants, polymers, and non-catalytic proteins can improve the enzymatic hydrolysis of lignocellulosic materials by blocking the exposed lignin surfaces, but involves extra expense. Here, soybean protein, one of the cheapest proteins available, was evaluated as an alternative additive for the enzymatic hydrolysis of pretreated sugarcane bagasse. The effect of the enzyme source was investigated using enzymatic cocktails from A. niger and T. reesei cultivated under solid-state, submerged, and sequential fermentation. The use of soybean protein led to approximately 2-fold increases in hydrolysis, relative to the control, for both A. niger and T. reesei enzymatic cocktails from solid-state fermentation. The effect was comparable to that of BSA. Moreover, the use of soybean protein and a 1:1 combination of A. niger and T. reesei enzymatic cocktails resulted in 54% higher glucose release, compared to the control. Soybean protein is a potential cost-effective additive for use in the biomass conversion process.

Techno-economic comparison of biojet fuel production from lignocellulose, vegetable oil and sugar cane juice.

In this study, a techno-economic comparison was performed considering three processes (thermochemical, biochemical and hybrid) for production of jet fuel from lignocellulosic biomass (2G) versus two processes from first generation (1G) feedstocks, including vegetable oil and sugar cane juice. Mass and energy balances were constructed for energy self-sufficient versions of these processes, not utilising any fossil energy sources, using ASPEN Plus® simulations. All of the investigated processes obtained base minimum jet selling prices (MJSP) that is substantially higher than the market jet fuel price (2-4 fold). The 1G process which converts vegetable oil, obtained the lowest MJSPs of $2.22/kg jet fuel while the two most promising 2G processes- the thermochemical (gasification and Fischer-Tropsch synthesis) and hybrid (gasification and biochemical upgrading) processes- reached MJSPs of $2.44/kg and $2.50/kg jet fuel, respectively. According to the economic sensitivity analysis, the feedstock cost and fixed capital investment have the most influence on the MJSP.

Activated carbon from pyrolysed sugarcane bagasse: Silver nanoparticle modification and ecotoxicity assessment.

Activated carbon from pyrolysed sugarcane bagasse (ACPB) presented pore size ranges from 1.0 to 3.5nm, and surface area between 1200 and 1400m(2)g(-1) that is higher than commonly observed to commercial activated carbon. The ACPB material was successfully loaded with of silver nanoparticles with diameter around 35nm (0.81wt.%). X-ray photoelectron spectroscopy (XPS) analyses showed that the material surface contains metallic/Ag(0) (93.60wt.%) and ionic/Ag(+) states (6.40wt.%). The adsorption capacity of organic model molecules (i.e. methylene blue and phenol) was very efficient to ACPB and ACPB loaded with silver nanoparticles (ACPB-AgNP), indicating that the material modification with silver nanoparticles has not altered its adsorption capacity. ACPB-AgNP inhibited bacteria growth (Escherichia coli), it is a promising advantage for the use of these materials in wastewater treatment and water purification processes. However, ACPB-AgNP showed environmental risks, with toxic effect to the aquatic organism Hydra attenuata (i.e. LC50 value of 1.94mgL(-1)), and it suppressed root development of Lycopersicum esculentum plant (tomato). Finally, this work draw attention for the environmental implications of activated carbon materials modified with silver nanoparticles.

Techno-economic analysis of ethanol production from sugarcane bagasse using a Liquefaction plus Simultaneous Saccharification and co-Fermentation process.

A techno-economic analysis was conducted for a simplified lignocellulosic ethanol production process developed and proven by the University of Florida at laboratory, pilot, and demonstration scales. Data obtained from all three scales of development were used with Aspen Plus to create models for an experimentally-proven base-case and 5 hypothetical scenarios. The model input parameters that differed among the hypothetical scenarios were fermentation time, enzyme loading, enzymatic conversion, solids loading, and overall process yield. The minimum ethanol selling price (MESP) varied between 50.38 and 62.72 US cents/L. The feedstock and the capital cost were the main contributors to the production cost, comprising between 23-28% and 40-49% of the MESP, respectively. A sensitivity analysis showed that overall ethanol yield had the greatest effect on the MESP. These findings suggest that future efforts to increase the economic feasibility of a cellulosic ethanol process should focus on optimization for highest ethanol yield.