Assessment of chromite ore wastes for methylene blue adsorption: Isotherm, kinetic, thermodynamic studies, ANN, and statistical physics modeling.

This research investigates the adsorption potential of chrysotile and lizardite, two minerals derived from chromite ore wastes, for the uptake of Methylene Blue (MB) dye from waste streams. The characterization of these minerals involves XRD, XRF, FTIR, and SEM. Results confirm the dominance of polymorphic magnesium silicate minerals, specifically chrysotile and lizardite, in the samples. The FTIR spectra reveal characteristic vibration bands confirming the presence of these minerals. The SEM analysis depicts irregular surfaces with broken and bent edges, suggesting favorable morphologies for adsorption. N2 adsorption-desorption isotherms indicate mesoporous structures with Type IV pores in both adsorbents. The Central Composite Design approach is employed to optimize MB adsorption conditions, revealing the significance of contact time, adsorbent mass, and initial MB concentration. The proposed models exhibit high significance, with F-values and low p-values indicating the importance of the studied factors. Experimental validation confirms the accuracy of the models, and the optimum conditions for MB adsorption are determined. The influence of solution acidity on MB uptake is investigated, showing a significant enhancement at higher pH values. Isothermal studies indicate Langmuir and Freundlich models as suitable descriptions for MB adsorption onto chrysotile and lizardite. The maximum adsorption capacities of MB for chrysotile and lizardite were found to be 352.97 and 254.85, respectively. Kinetic studies reveal that the pseudo-first-order model best describes the adsorption process. Thermodynamic analysis suggests an exothermic and spontaneous process. Statistical physics models further elucidate the monolayer nature of adsorption. Additionally, an artificial neural network is developed, exhibiting high predictive capability during training and testing stages. The reusability of chrysotile and lizardite is demonstrated through multiple regeneration cycles, maintaining substantial adsorption potential. Therefore, this research provides comprehensive insights into the adsorption characteristics of chrysotile and lizardite, emphasizing their potential as effiective and reusable sorbents for MB uptake from wastewater.

Treatment of environmental contamination using sepiolite: current approaches and future potential.

To evaluate the potential of sepiolite-based materials to resolve environmental pollution problems, a study is needed which looks at the whole life cycle of material application, including the residual value of material classified as waste from the exploitation of sepiolite deposits in the region or from its processing and purification. This would also maximize value from the exploitation process and provide new potential for local waste management. We review the geographical distribution of sepiolite, its application in the treatment of potentially toxic elements in soil and across the wider landscape, an assessment of modification and compositional variation of sepiolite-based applications within site remediation and wastewater treatment. The potential of sepiolite-based technologies is widespread and a number of processes utilize sepiolite-derived materials. Along with its intrinsic characteristics, both the long-term durability and the cost-effectiveness of the application need to be considered, making it possible to design ready-to-use products with good market acceptance. From a critical analysis of the literature, the most frequently associated terms associated with sepiolite powder are the use of lime and bentonite, while fly ash ranked in the top ten of the most frequently used material with sepiolite. These add improved performance for the inclusion as a soil or wastewater treatment options, alone or applied in combination with other treatment methods. This approach needs an integrated assessment to establish economic viability and environmental performance. Applications are not commonly evaluated from a cost-benefit perspective, in particular in relation to case studies within geographical regions hosting primary sepiolite deposits and wastes that have the potential for beneficial reuse.

Measurement uncertainty assessment of magnesium trisilicate column for determination of Sudan colorants in food by HPLC using C8 column.

This study aimed to conduct measurement uncertainty assessment of a new method for determination of Sudan colorants (Sudan I, II, III and IV) in food by high performance liquid chromatography (HPLC). Samples were extracted with organic solvents (hexane, 20% acetone) and first purified by magnesium trisilicate (2MgO·3SiO2). The Sudan colorants (Sudan I-IV) were also initially separated on C8 by gradient elution using acetonitrile and 0.1% (v/v) formic acid aqueous solution as the mobile phases and detected with diode-array detector (DAD). The uncertainty of mathematical model of Sudan I, II, III and IV is based on EURACHEM guidelines. The sources and components of uncertainty were calculated. The experiment gave a good linear relationship over the concentration from 0.4 to 4.0 µg/mL and spiked recoveries were from 74.0% to 97.5%. The limits of determination (LOD) were 48, 61, 36, 58 µg/kg for the four analytes, respectively. The total uncertainty of Sudan colorants (Sudan I, II, III and IV) was 810±30.8, 790±28.4, 750±27.0, 730±50.0 µg/kg, respectively. The recovery uncertainty was the most significant factor contributing to the total uncertainty. The developed method is simple, rapid, and highly sensitive. It can be used for the determination of trace Sudan dyes in food samples. The sources of uncertainty have been identified and uncertainty components have been simplified and considered.

Safety Assessment of Synthetic Fluorphlogopite as Used in Cosmetics.

The Cosmetic Ingredient Review Expert Panel (the Panel) reviewed the safety of synthetic fluorphlogopite as used in cosmetics. Synthetic fluorphlogopite functions as a bulking agent and a viscosity-increasing agent. The Panel reviewed available animal and human data related to this ingredient along with a previous safety assessment of other magnesium silicates. The Panel concluded that synthetic fluorphlogopite was safe as cosmetic ingredients in the practices of use and concentration as given in this safety assessment.

Analysis of operating costs for producing biodiesel from palm oil at pilot-scale in Colombia.

The present study aims to evaluate the operating costs of biodiesel production using palm oil in a pilot-scale plant with a capacity of 20,000 L/day (850 L/batch). The production plant uses crude palm oil as a feedstock, and methanol in a molar ratio of 1:10. The process incorporated acid esterification, basic transesterification, and dry washing with absorbent powder. Production costs considered in the analysis were feedstock, supplies, labor, electricity, quality and maintenance; amounting to $3.75/gal ($0.99/L) for 2013. Feedstocks required for biodiesel production were among the highest costs, namely 72.6% of total production cost. Process efficiency to convert fatty acids to biodiesel was over 99% and generated a profit of $1.08/gal (i.e., >22% of the total income). According to sensitivity analyses, it is more economically viable for biodiesel production processes to use crude palm oil as a feedstock and take advantage of the byproducts such as glycerine and fertilizers.

Utilization of sepiolite materials as a bottom liner material in solid waste landfills.

Landfill bottom liners are generally constructed with natural clay soils due to their high strength and low hydraulic conductivity characteristics. However, in recent years it is increasingly difficult to find locally available clay soils that satisfy the required engineering properties. Fine grained soils such as sepiolite and zeolite may be used as alternative materials in the constructions of landfill bottom liners. A study was conducted to investigate the feasibility of using natural clay rich in kaolinite, sepiolite, zeolite, and their mixtures as a bottom liner material. Unconfined compression tests, swell tests, hydraulic conductivity tests, batch and column adsorption tests were performed on each type of soil and sepiolite-zeolite mixtures. The results of the current study indicate that sepiolite is the dominant material that affects both the geomechanical and geoenvironmental properties of these alternative liners. An increase in sepiolite content in the sepiolite-zeolite mixtures increased the strength, swelling potential and metal adsorption capacities of the soil mixtures. Moreover, hydraulic conductivity of the mixtures decreased significantly with the addition of sepiolite. The utilization of sepiolite-zeolite materials as a bottom liner material allowed for thinner liners with some reduction in construction costs compared to use of a kaolinite-rich clay.

Assessment of natural sepiolite on cadmium stabilization, microbial communities, and enzyme activities in acidic soil.

A pot trial was conducted to assess the efficiency of sepiolite-induced cadmium (Cd) immobilization in ultisoils. Under Cd concentrations of 1.25, 2.5, and 5 mg kg(-1), the available Cd in the soil after the application of 1-10 % sepiolite decreased by a maximum of 44.4, 23.0, and 17.0 %, respectively, compared with no sepiolite treatments. The increase in the values of soil enzyme activities and microbial number proved that a certain metabolic recovery occurred after sepiolite treatment. The dry biomass of spinach (Spinacia oleracea) increased with increasing sepiolite concentration in the soil. However, the concentration (dry weight) of Cd in the spinach shoots decreased with the increase in sepiolite dose, with maximum reduction of 92.2, 90.0, and 84.9 %, respectively, compared with that of unamended soils. Under a Cd level of 1.25 mg kg(-1), the Cd concentration in the edible parts of spinach at 1 % sepiolite amendment was lower than 0.2 mg kg(-1) fresh weight, the maximum permissible concentration (MPC) of Cd in vegetable. Even at higher Cd concentrations (2.5 and 5 mg kg(-1)), safe spinach was produced when the sepiolite treatment was up to 5 %. The results showed that sepiolite-assisted remediation could potentially succeed on a field scale by decreasing Cd entry into the food chain.

Multiresidue analysis of 83 pesticides and 12 dioxin-like polychlorinated biphenyls in wine by gas chromatography-time-of-flight mass spectrometry.

A multiresidue method is described for simultaneous estimation of 83 pesticides and 12 dioxin-like polychlorinated biphenyls (PCBs) in red and white wines. The samples (20mL wine, acidified with 20 mL 1% HCl) were extracted with 10 mL ethyl acetate (+20 g sodium sulphate) and cleaned by dispersive solid-phase extraction (DSPE) with anhydrous calcium chloride and Florisil successively. The final extract (5 mL) was solvent exchanged to 1mL of cyclohexane:ethyl acetate (9:1), further cleaned by DSPE with 25mg primary secondary amine sorbent and analyzed by gas chromatography-time-of-flight mass spectrometry (GC-TOF-MS) within 31 min run time. The limits of quantification of most analytes were 80% for most analytes except cyprodinil, buprofezin and iprodione. The expanded uncertainties at 10 ng/mL were <20% for most analytes. Intra-laboratory precision in terms of Horwitz ratio of all the analytes was below 0.5, suggesting ruggedness of the method. Effectively, the method detection limit for most analytes was as low as up to 1 ng/mL in both red and white wine, except for cyfluthrin and cypermethrin.

The assessment of gastric acidity and antacid effect in pregnant women by a non-invasive radiotelemetry technique.

Non-invasive radiotelemetry techniques were used for the in-vivo assessment of gastric acidity and the effect of antacids in non-pregnant women and women in the third trimester of pregnancy. A particulate (magnesium trisilicate mixture) and a non-particulate (sodium citrate) antacid were studied. There was no significant difference in basal gastric acidity and gut transit time between the pregnant and non-pregnant subjects. The median and range of values for the efficacy (defined as the integrated area under the pH/time curves) of sodium citrate was 138.3 pH.min (29.8-520.7) in the non-pregnant and 103.0 pH.min (54.3-375.6) in the pregnant subjects. The median and range of values for the duration of action of sodium citrate were 38.6 (18.1-147.4) min in the non-pregnant and 30.5 (20.0-119.1) min in the pregnant women. Magnesium trisilicate mixture resulted in a greater intragastric pH change and had a greater efficacy than sodium citrate, but the duration of action of the two antacids was similar.

The use of radiotelemetry techniques for the in vivo assessment of antacids.

The use of the pH radio pill for the assessment of antacid effect has been evaluated. The correlation between the pH pill and a conventional pH electrode system was high (r2 = 0.997). The records of in vivo pH against time allow unique measurements of antacid efficacy (defined as the integrated area under the pH against time curve) and duration of action to be obtained. Using a free pill, antacid assessments were performed in 13 subjects in the left lateral position. The effects of repeated antacid administrations were studied in five subjects using a pH pill which was prevented from leaving the stomach by tethering it to the teeth. These longer studies were performed in the sitting position. The efficacy (p less than 0.02) and duration of action (p less than 0.02) of sodium citrate 0.3 M were less in those subjects in whom the pill was tethered. The differences between the results of the studies using either a free or a tethered pill can be attributed to posture. The overall duration of action of sodium citrate 15 ml was short, the mean (SEM) value being 42.4 (4.5) minutes in the left lateral position and 21.2 (4.0) minutes in the upright position.