Determination of threshold values and heavy metal pollution assessment of soils in an industrial area in Ghana.

Industrial activities have the potential to pollute soils with a wide variety of heavy metals (HMs). In Ghana, however, assessment of HM pollution of soils in industrial areas remains limited. Accordingly, HM soil pollution in one of the industrial areas in Accra, Ghana was assessed. Soil samples were taken and analysed for HMs, including Fe, Zr, Zn, Ti, Sr, Rb, Mn, Pb, Cu, and Co, using X-Ray Fluorescence (XRF). HM geochemical threshold values (GTVs) were determined to establish soil HM pollution levels and identify areas needing remediation. Furthermore, risk assessments were conducted to evaluate the potential ecological and human health risks associated with these metals. The mean concentrations of Fe, Zn, Rb, Sr, Zr, Ti, Mn, Co, Cu, and Pb in the soils were: 27133.83, 147.72, 16.30, 95.95, 307.11, 4663.66, 289.85, 418.54, 44.97, and 112.88 mg/kg, respectively. Generally, the concentrations of HMs decreased with depth, although some lower layers exhibited elevated HM levels. Soil pollution levels were categorized as low for Fe, Rb, Zr, Ti, Mn, Co, and Cu; moderate for Sr and Zn; and considerable for Pb. Notably, the northwestern part of the study area displayed a considerable to very high degree of HM contamination. While HMs in the soils posed low ecological risk, the human health risk assessment indicated potential health effects from Co, particularly in children. The presence of HMs in the soils was noted to originate from both natural geological phenomena and human activities, including industrial operations, agricultural practices, landfill activities, and vehicular emissions.

Spatial and temporal-trend assessment of desertification-sensitive land using the desertification sensitivity index in the provincial Ninh Thuan, Vietnam.

Desertification is a specific land-degrading process, reducing soil productivity and potentially threatening global food security. Therefore, spatially and temporally identifying and mapping desertification-sensitive areas is essential for better management. The current study aimed to (1) assess spatial areas sensitive to desertification and (2) examine the changing tendency of the desertification-sensitive areas over the past 25 years in the provincial Ninh Thuan. The desertification sensitivity index (DSI) was computed based on the Medalus model using 10 quantitative parameters, grouped into the soil, climate, and vegetation quality indexes, computed for the years 1996, 2005, 2010, and 2016. GIS was used to map desertification-sensitive areas associated with five DSI classes. Results showed that classes II and III had the highest area percentage, followed by classes IV and V, and class I. The classes most sensitive to desertification (classes IV and V) covered around 13 to 17%, and classes II and III were 25 to 32% of the total study area, respectively. The coastal areas located in the southeastern parts were more sensitive to desertification than the other parts. Over the four examined periods, the areas of classes IV and V increased while those of classes II and I decreased. These indicated that the study province tended to increase in its desertification sensitivity with a severe increase in the coastal areas over the past 25 years. The key factors involved in these changes could be related the human activities and climate variation, which could be more serious in southeastern areas than in the other areas.

Levels, Distribution and Ecological Risk Assessment of PBDEs in Soils and Plants Around the Engineering Plastics Factory.

This study systematically investigated the pollution levels and migration trends of PBDEs in soils and plants around engineering plastics factory, and identified the ecological risks of PBDEs in the environment around typical pollution sources.The results showed that 13 kinds of PBDEs were widely detected in the surrounding areas, and the concentration level was higher than the general environmental pollution level. The total PBDE concentrations (∑13PBDEs) in soils ranged from 14.6 to 278.4 ng/g dry weight (dw), and in plants ranged from 11.5 to 176 ng/g dw. Both soil and plant samples showed that BDE-209 was the most important congener, the pollution level in soil and plant was similar, and the composition of PBDEs congener was similar. In the soil column (50 cm), the radial migration of PBDEs was mainly concentrated in the 0-30 cm section. Except for BDE-66, which was mainly located in the 20-30 cm soil layer, the concentration of PBDEs was the highest in the 0-10 cm region. Furthermore, the environmental risks of PBDEs in soil and plants were evaluated by hazard quotient method, and the HQ values were all < 1, which did not exhibit any ecological risk. The evaluation results also showed that the ecological risk of PBDEs in soil was higher than that of plants, especially penta-BDE, which should be paid more attention.

Heavy metals and potential health risk assessment of Lactuca sativa and Daucus carrota from soil treated with organic manures and chemical fertilizer.

The large-scale production of food crops with heavy application of chemical fertilizers in the effort to meet the astronomical increase in food demands may be counterproductive to the goal of food security. This study investigated the effect of different soil treatments on the levels of heavy metals (Cr, Cu, Fe, Ni, Pb, and Zn) in two types of vegetables Lactuca sativa (lettuce) and Daucus carrota (carrot). The potential carcinogenic and non-carcinogenic health risks from their consumption were also evaluated. Planting experiment was set up in a randomized block design, with different soil treatments of soil + cow dung (CD), soil + sewage sludge (SS), soil + chemical fertilizer (nitrogen-phosphorus-potassium (NPK)), and untreated soil (UNTRD). The vegetables were harvested at maturity, washed with distilled water, and subjected to an acid digestion process before the levels of heavy metals were measured by inductively coupled plasma spectrometry (ICP-MS). The mean concentrations of the metals in the vegetables across all treatments were below the maximum permissible limits. The pattern of heavy metal accumulation by the vegetables suggested that the lettuce from SS treatment accumulated higher concentrations of heavy metals like Cr (0.20 mg/kg), Cu (3.91 mg/kg), Ni (0.33 mg/kg), and Zn (20.44 mg/kg) than carrot, with highest concentrations of Fe (90.89 mg/kg) and Pb (0.16 mg/kg) recorded in lettuce from NPK treatment. The bioaccumulation factor (BAF) showed that lettuce, a leafy vegetable, has bioaccumulated more heavy metals than carrot, a root vegetable. The BAF was generally below the threshold value of 1 in both vegetables, except in lettuce from NPK and CD treatments and carrot from NPK treatments, with BAF values of 1.6, 1.69, and 1.39, respectively. The cancer risk assessment factors were well below the unacceptable maximum range of 10-4 suggesting that consuming these vegetables might not expose an individual to potential risk of cancer development. The hazard quotient estimations were below the threshold values of 1 for all heavy metals; however, the hazard index (HI) values of 1.27 and 1.58 for lettuce from NPK and SS treatments indicate a potential non-carcinogenic health risk to consumers from intake of all the heavy metals.

Influence of Different Rates of Plant-Based Compost on Clay Soil Metal Behavior and Human Health Risk Assessment in Moringa oleifera Leaf Biomass.

An investigation of the impact of adding plant-based organic compost to clay soil from a Moringa oleifera farm focusing on the metal content, bioavailability, and accumulation of nutrients in M. oleifera leaves was conducted. Clay soil was mixed with 15%, 30%, 45% and 60% plant-based organic compost (by volume) in 20 cm wide, 2 L pots. Moringa oleifera plants were planted in four replicates of each treatment and control group. Results revealed that the addition of compost significantly (P < 0.05) altered the concentration of metals in the soil. Correspondingly, accumulation of nutrients in M. oleifera leaves increased with the addition of compost to the soil, except for cobalt and chromium. Trace elements had minimal bioavailability in the amended soils, and their presence in the leaves was lower than the permissible trace metal levels in food. The 30% combination had the highest concentration of calcium (45 042.5 mg/kg), magnesium (17430.0 mg/kg) and phosphorous (8802. 5 mg/kg) in M. oleifera leaves. The study concluded the addition of compost improved bioavailability of nutrients in the soil and their concentration in M. oleifera leaves. The target hazard quotients for heavy metals was less than one, indicating that M. oleifera leaf biomass harvested from soil amended with plant-based compost is safe for human consumption. These results serve as guidelines for recommended organic certification requiremets where plant-based compost is often used in the fast-growing herbal industry.

Biomolecular budget of persistent, microbial-derived soil organic carbon: The importance of underexplored pools.

The details of how soil microorganisms contribute to stable soil organic carbon pools are a pressing knowledge gap with direct implications for soil health and climate mitigation. It is now recognized that microbial necromass contributes substantially to the formation of stable soil carbon. However, the quantification of necromass in soils has largely been limited to model molecules such as aminosugar biomarkers. The abundance and chemical composition of other persistent microbial residues remain unresolved, particularly concerning how these pools may vary with microbial community structure, soil texture, and management practices. Here we use yearlong soil incubation experiments with an isotopic tracer to quantify the composition of persistent residues derived from microbial communities inhabiting sand or silt dominated soil with annual (corn) or perennial (switchgrass) monocultures. Persistent microbial residues were recovered in diverse soil biomolecular pools including metabolites, proteins, lipids, and mineral-associated organic matter (MAOM). The relative abundances of microbial contributions to necromass pools were consistent across cropping systems and soil textures. The greatest residue accumulation was not recovered in MAOM but in the light density fraction of soil debris that persisted after extraction by chemical fractionation using organic solvents. Necromass abundance was positively correlated with microbial biomass abundance and revealed a possible role of cell wall morphology in enhancing microbial carbon persistence; while gram-negative bacteria accounted for the greatest contribution to microbial-derived carbon by mass at one year, residues from gram-positive Actinobacteria and Firmicutes showed greater durability. Together these results offer a quantitative assessment of the relative importance of diverse molecular classes for generating durable soil carbon.

Assessment of soil fertility and nutrient management strategies in calcareous soils of Khuzestan province: a case study using the Nutrient Index Value method.

Soil fertility (SF) is a crucial factor that directly impacts the performance and quality of crop production. To investigate the SF status in agricultural lands of winter wheat in Khuzestan province, 811 samples were collected from the soil surface (0-25 cm). Eleven soil properties, i.e., electrical conductivity (EC), soil organic carbon (SOC), total nitrogen (TN), calcium carbonate equivalent (CCE), available phosphorus (Pav), exchangeable potassium (Kex), iron (Fe), copper (Cu), zinc (Zn), manganese (Mn), and soil pH, were measured in the samples. The Nutrient Index Value (NIV) was calculated based on wheat nutritional requirements. The results indicated that 100%, 93%, and 74% of the study areas for CCE, pH, and EC fell into the low, moderate, and moderate to high NIV classes, respectively. Also, 25% of the area is classified as low fertility (NIV < 1.67), 75% falls under medium fertility (1.67 < NIV value < 2.33), and none in high fertility (NIV value > 2.33). Assessment of the mean wheat yield (AWY) and its comparison with NIV showed that the highest yield was in the Ramhormoz region (5200 kg.ha-1), while the lowest yield was in the Hendijan region (3000 kg.ha-1) with the lowest EC rate in the study area. Elevated levels of salinity and CCE in soils had the most negative impact on irrigated WY, while Pav, TN, and Mn availability showed significant effects on crop production. Therefore, implementing SF management practices is essential for both quantitative and qualitative improvement in irrigated wheat production in Khuzestan province.

Compositional-geochemical characterization of lead (Pb) anomalies and Pb-induced human health risk in urban topsoil.

Urban areas are characterized by a constant anthropogenic input, which is manifested in the chemical composition of the surface layer of urban soil. The consequence is the formation of intense anomalies of chemical elements, including lead (Pb), that are atypical for this landscape. Therefore, this study aims to explore the compositional-geochemical characteristics of soil Pb anomalies in the urban areas of Yerevan, Gyumri, and Vanadzor, and to identify the geochemical associations of Pb that emerge under prevalent anthropogenic influences in these urban areas. The results obtained through the combined use of compositional data analysis and geospatial mapping showed that the investigated Pb anomalies in different cities form source-specific geochemical associations influenced by historical and ongoing activities, as well as the natural geochemical behavior of chemical elements occurring in these areas. Specifically, in Yerevan, Pb was closely linked with Cu and Zn, forming a group of persistent anthropogenic tracers of urban areas. In contrast, in Gyumri and Vanadzor, Pb was linked with Ca, suggesting that over decades, complexation of Pb by Ca carbonates occurred. These patterns of compositional-geochemical characteristics of Pb anomalies are directly linked to the socio-economic development of cities and the various emission sources present in their environments during different periods. The human health risk assessment showed that children are under the Pb-induced non-carcinogenic risk by a certainty of 63.59% in Yerevan and 50% both in Gyumri and Vanadzor.

Responses of runoff and sediment yield to slope length and gravel content of Lou soil engineering accumulation slope in Guanzhong region, Northwest China.

With the economic development, a large number of engineering accumulation bodies with Lou soil as the main soil type were produced in Guanzhong area, Northwest China. We examined the characteristics of runoff and sediment yield of Lou soil accumulation bodies with earth (gravel content 0%) and earth-rock (gravel content 30%) under different rainfall intensities (1.0, 1.5, 2.0, 2.5 mm·min-1) and different slope lengths (3, 5, 6.5, 12 m) by the simulating rainfall method. The results showed that runoff rate was relatively stable when rainfall intensity was 1.0-1.5 mm·min-1, while runoff rate fluctuated obviously when rainfall intensity was 2.0-2.5 mm·min-1. The average runoff rate varied significantly across different rainfall intensities on the same slopes, and the difference of average runoff rate of the two slopes was significantly increased with rainfall intensity. Under the same rainfall intensity, the difference in runoff rate between the slope lengths of the earth-rock slope was more obvious than that of the earth slope. When the slope length was 3-6.5 m, flow velocity increased rapidly at first and then increased slowly or tended to be stable. When the slope length was 12 m, flow velocity increased significantly. In general, with the increases of rainfall intensity, inhibition effect of gravel on the average flow velocity was enhanced. When rainfall intensity was 2.5 mm·min-1, the maximum reduction in the average flow velocity of earth-rock slope was 61.5% lower than that of earth slope. When rainfall intensity was less than 2.0 mm·min-1, sediment yield rate showed a trend of gradual decline or stable change, while that under the other rainfall intensities showed a trend of rapid decline and then fluctuated sharply. The greater the rainfall intensity, the more obvious the fluctuation. There was a significant positive correlation between the average sediment yield rate and runoff parameters, with the runoff rate showing the best fitting effect. Among the factors, slope length had the highest contribution to runoff velocity and rainfall erosion, which was 51.8% and 35.5%, respectively. This study can provide scientific basis for soil and water erosion control of engineering accumulation in Lou soil areas.

Urban roadside greenery as a carbon sink: Systematic assessment considering understory shrubs and soil respiration.

Roadside greenery is an efficient strategy for maximizing ecosystem services, including carbon sequestration in urban settings. However, the quantification of carbon sequestration is not comprehensive because understory shrubs and soil respiration have not been thoroughly considered. We developed an integrated methodology that combined field measurements and greenhouse incubation to comprehensively assess carbon sequestration in roadside greenery systems. The system was defined as an 8 m long section comprising a single tree (Zelkova serrata), 79 shrubs (Euonymus japonicus), and soil. Annual carbon uptake by a tree was estimated using an allometric equation derived from an official government report. For shrubs, carbon uptake was measured in the field by monitoring CO2 concentration change in the chamber enclosing the leaves and stems. Annual carbon uptake by shrubs was estimated by using the regression equation among carbon uptake, air temperature, and photosynthetically active radiation. We also estimated shrub root respiration by combining net primary production (NPP) from the greenhouse incubation and measured pruning effect in the field. This enabled us to differentiate heterotrophic respiration from the total soil respiration. The overall methodology accurately assessed net ecosystem production (NEP) from the roadside greenery system, which is 0.528 kg C m-2 yr-1. If this figure is extended to all roads in the target city, it can offset daily carbon emitted from the total registered passenger vehicles in the target city. Considering that shrubs sequester an amount equivalent to 29.3 % of the carbon sequestered by tree species, the current greenhouse gas inventory should include shrubs as an important carbon sink. As we also revealed that roadside soil has high carbon vulnerability, proper soil management is needed to enhance NEP. Our systematic approach evaluating the carbon balance within the roadside greenery system can be applied to other cities, contributing to enhance global understanding of urban carbon cycle.

Environmental impact assessment of the electrokinetic adsorption barriers to remove different herbicides from agricultural soils.

In this study, the sustainability of the electrokinetic remediation soil flushing (EKSFs) process integrated without and with adsorption barriers (EKABs) have been evaluated for the treatment of four soils contaminated with Atrazine, Oxyfluorfen, Chlorosulfuron and 2,4-D. To this purpose, the environmental effects of both procedures (EKSFs and EKABs) have been determined through a life cycle assessment (LCA). SimaPro 9.3.0.3 was used as software tool and Ecoinvent 3.3 as data base to carry out the inventory of the equipment of each remediation setup based on experimental measurements. The environmental burden was quantified using the AWARE, USEtox, IPPC, and ReCiPe methods into 3 Endpoint impact categories (and damage to human health, ecosystem and resources) and 7 Midpoints impact categories (water footprint, global warming potential, ozone depletion, human toxicity (cancer and human non-cancer), freshwater ecotoxicity and terrestrial ecotoxicity). In general terms, the energy applied to treatment (using the Spanish energy mix) was the parameter with the greatest influence on the carbon footprint, ozone layer depletion and water footprint accounting for around 70 % of the overall impact contribution. On the other hand, from the point of view of human toxicity and freshwater ecotoxicity of soil treatments with 32 mg kg-1 of the different pesticides, the EKSF treatment is recommended for soils with Chlorosulfuron. In this case, the carbon footprint and water footprint reached values around 0.36 kg of CO2 and 114 L of water per kg of dry soil, respectively. Finally, a sensitivity analysis was performed assuming different scenarios.

Migration patterns and health risk assessment of polycyclic aromatic compounds in typical coal fire source.

The Wuda coal fire in Inner Mongolia, China, is a global catastrophic event. It emits a huge volume of organic pollutants, including polycyclic aromatic compounds (PACs), which are widely concerning due to their physiological toxicity and environmental persistence. However, there is no systematic study on the enrichment and migration patterns of PACs emitted from coal fires. Here, we compared samples from coal fire sponges and surrounding soil, and analyzed 47 PACs using GC × GC-TOFMS. Data analysis showed that the average content of 16 polycyclic aromatic hydrocarbons (16PAHs) in the coal fire sponge was 15400.65 ng/g, which is about 4.2 times higher than that in the surrounding soil. Meanwhile, 31 PACs were detected at levels far exceeding those of 16PAHs. The distribution pattern of PACs showed that coal fire sources are more likely to produce and store 16PAHs while surrounding soils are more likely to be enriched with PAH derivatives. The cancer risk assessment revealed a significant cancer risk in both the coal fires and the surrounding soil. The formation mechanism of oxygenated PAHs was also explored, and it was found that coal fires emit 16PAHs and alkylated PAHs, which oxidize to form oxygenated PAHs during migration to surrounding soils. The value of naphthaldehyde/alkylated naphthalene (< 2) can be referenced as characteristic markers of coal fire pollution. This provides a new perspective on the sources of PACs in the current environment.

Constructing cropland ecological stability assessment method based on disturbance-resistance-response processes and classifying cropland ecological types.

The cropland ecosystem stability (CES) has received increasing attention, especially in ecologically fragile areas, because of its impact on cropland quality, agricultural production and its ability to resist external disturbances. In this study, we first introduced the concepts of resilience and resistance, proposed the ecosystem disturbance-resistance-response process, and established a framework for evaluating the spatial and temporal dynamics of the CES based on RS data, and innovatively combined the RS assessment results of CES with soil field samples data to further classify cropland ecological types (CET) in a key agricultural areas of the Qinghai-Tibetan Plateau, which can effectively identify those croplands in need of priority ecological protection. Results indicate that the combined interactions of disturbance, resistance and response systems affect CES, forming a complex process with significant fluctuations and spatial variations. We also conclude that the disturbance system is positively influenced by topography and precipitation, while slope negatively affects resistance system. Hydrothermal conditions positively influence resistance system, while the response system is influenced by environmental factors at a lower intensity in six periods. It was interesting to note that soil α-biodiversity indicators are significantly and positively correlated with CES at the end of the study period. Therefore, based on the CES assessment results, we further combined the soil α-biodiversity indicators to classify the type of spatial pattern of CET and found that the eastern and northern areas have better quality, which implied an increase in the CES and a higher level of soil biodiversity, which was ideal for cropland expansion. On the contrary, we concluded that the ecosystem maintenance of the Huangshui headwaters and the northern mountainous areas needs to be strengthened in order to reverse the ecological fragility here and safeguard the cropland productive capacity.

Influencing factors and risk assessment of phthalate ester pollution in the agricultural soil on a tropical island.

Phthalate esters (PAEs) are widely prevalent in agricultural soil and pose potential risks to crop growth and food safety. However, the current understanding of factors influencing the behavior and fate of PAEs is limited. This study conducted a large-scale investigation (106 sites in 18 counties with 44 crop types) of 16 types of PAEs on a tropical island. Special attention was given to the impacts of land use type, soil environmental conditions, agricultural activity intensity, and urbanization level. The health risks to adults and children from soil PAEs via multiple routes of exposure were also evaluated. The results showed that the mean concentration of PAEs was 451.87 ± 284.08 µg kg-1 in the agricultural soil. Elevated agricultural and urbanization activities contributed to more pronounced contamination by PAEs in the northern and southern regions. Land use type strongly affected the concentration and composition of PAEs in agricultural soils, and the soil PAE concentration decreased in the order of vegetable fields, orchards, paddy fields, and woodlands. In paddy fields, di-isobutyl phthalate and di-n-butyl phthalate made more substantial contributions to the process through which the overlying water inhibited volatilization. Soil microplastic abundance, pesticide usage, crop yield, gross domestic product, and distance to the nearest city were calculated to be the major factors influencing the concentration and distribution of PAEs. Soil pH, organic matter content, microplastic abundance and the fertilizer application rate can affect the adsorption of PAEs by changing the soil environment. A greater risk was detected in the northern region and paddy fields due to the higher soil PAE concentrations and the dietary structure of the population. This study reveals important pathways influencing the sources and fate of PAE pollution in agricultural soils, providing fundamental data for controlling PAE contamination.

RARE-EARTH elements in the topsoils of a Russian industrial city: Sources and human health risk assessment.

Research on rare-earth elements (REEs) in urban soils of Russian industrial cities is extremely limited. This study investigates the potential sources and human health risks of REEs contained in the topsoils of the industrial Russian city of Chelyabinsk. The study also takes into account natural sources of REE as the city is located on the border of granites (Urals) and sedimentary rocks (Western Siberia). We analyzed the concentration and distribution of REEs in the soils of four types of locations: residential courtyards, city parks, roadsides, and industrial locations. The total REE concentrations ranged from 44 to 255 mg/kg, with average concentrations of 140, 124, 113 and 89 mg/kg in the courtyards, roadsides, industrial location and city parks, respectively. The REE content in courtyard soils could be influenced by poor cleaning of fallen leaves. The ratios of light REE (LREE) to heavy REE (HREE) ranged from 9.5 to 10.1, revealing an obvious fractionation between them. The fractionation of LREE and HREE, and the REE/ES (European Shale) pattern showed that REE accumulation in Chelyabinsk soils has been disturbed by human activities. It was shown that the dust from industrial emissions was the main anthropogenic source of REE accumulation in urban soil. The largest amounts of REEs are emitted from an electrometallurgical plant and zinc production plant. Fortunately, the estimated daily intakes of REE from soils for children and adults were well below the safety thresholds. At the same time, in order to prevent social tension and reduce the anthropogenic load on the urban area, it is recommended to use phytoremediation technologies, smart landscaping of industrial and residential areas, more thorough cleaning of fallen leaves and road dust. It is also recommended to move the most dangerous production processes outside the urban area.

Wood ash application for crop production, amelioration of soil acidity and contaminated environments.

Agriculture is vital to human life and economic development even though it may have a detrimental influence on soil quality. Agricultural activities can deteriorate the soil quality, endangers the ecosystem health and functioning, food safety, and human health. To resolve the problem of soil degradation, alternative soil conditioners such as wood ash are being explored for their potential to improve soil-plant systems. This study provides an overview of the production, properties, and effects of wood ash on soil properties, crop productivity, and environmental remediation. A comprehensive search of relevant databases was conducted in order to locate and assess original research publications on the use of wood ash in agricultural and environmental management. According to the findings, wood ash, a byproduct of burning wood, may improve the structure, water-holding capacity, nutrient availability, and buffering capacity of soil as well as other physico-chemical, and biological attributes of soil. Wood ash has also been shown to increase agricultural crop yields and help with the remediation of polluted regions. Wood ash treatment, however, has been linked to several adverse effects, such as increased trace element concentrations and altered microbial activity. The examination found that wood ash could be a promising material to be used as soil conditioner and an alternative supply of nutrients for agricultural soils, while, wood ash contributes to soil improvement and environmental remediation, highlighting its potential as a sustainable solution for addressing soil degradation and promoting environmental sustainability in agricultural systems.

Integrated assessment of potentially toxic elements in soil of the Kangdian metallogenic province: A two-point machine learning approach.

The accumulation of potentially toxic elements in soil poses significant risks to ecosystems and human well-being due to their inherent toxicity, widespread presence, and persistence. The Kangdian metallogenic province, famous for its iron-copper deposits, faces soil pollution challenges due to various potentially toxic elements. This study explored a comprehensive approach that combinescombines the spatial prediction by the two-point machine learning method and ecological-health risk assessment to quantitatively assess the comprehensive potential ecological risk index (PERI), the total hazard index (THI) and the total carcinogenic risk (TCR). The proportions of copper (Cu), cadmium (Cd), manganese (Mn), lead (Pb), zinc (Zn), and arsenic (As) concentrations exceeding the risk screening values (RSVs) were 15.03%, 5.1%, 3.72%, 1.24%, 1.1%, and 0.13%, respectively, across the 725 collected samples. Spatial prediction revealed elevated levels of As, Cd, Cu, Pb, Zn, mercury (Hg), and Mn near the mining sites. Potentially toxic elements exert a slight impact on soil, some regions exhibit moderate to significant ecological risk, particularly in the southwest. Children face higher non-carcinogenic and carcinogenic health risks compared to adults. Mercury poses the highest ecological risk, while chromium (Cr) poses the greatest health hazard for all populations. Oral ingestion represents the highest non-oncogenic and oncogenic risks in all age groups. Adults faced acceptable non-carcinogenic risks. Children in the southwest region confront higher health risks, both non-carcinogenic and carcinogenic, from mining activities. Urgent measures are vital to mitigate Hg and Cr contamination while promoting handwashing practices is essential to minimize health risks.

Using oral bioaccessibility measurements to refine risk assessment of potentially toxic elements in topsoils across an urban area.

Elevated concentrations of As, Cr, Cu, Ni, Pb, V and Zn in topsoils in Belfast, Northern Ireland have been found to exceed assessment criteria in the city and therefore may pose a risk to human health. Most generic assessment criteria (GAC) for potentially toxic elements (PTEs) in soils assume PTEs are 100% bioavailable to humans. Here we use in-vitro oral bioaccessibility testing using the Unified BARGE method (UBM) to measure what proportion of soil contamination dissolves in the digestive tract and therefore is available for absorption by the body. This study considers how PTE bioaccessibility in soils varies spatially across urban areas and refines human health risk assessment for these PTEs using site specific oral bioaccessibility results to present the first regional assessment of risk that incorporates bioaccessibility testing. A total of 103 urban soil samples were selected for UBM testing. Results showed low bioaccessible fraction (BAF) for the PTEs from geogenic sources: Cr (0.45-5.9%), Ni (1.1-46.3%) and V (2.2-23.9%). Higher BAF values were registered for PTEs from anthropogenic sources: As (8.0-86.9%), Cu (3.4-67.8%), Pb (9.1-106.2%) and Zn (2.4-77.5%). Graphs of bioaccessibility adjusted assessment criteria (BAAC) were derived for each urban land use type and PTE. These provide a visual representation of the significance of oral bioaccessibility when deriving BAAC and how this is affected by 1) dominant exposure pathways for each land use and 2) relative harm posed from exposure to PTEs via each pathway, allowing oral bioaccessibility research to be targeted to contaminants and pathways that most significantly impact risk assessment. Pb was the most widespread contaminant with 16.5% of sites exceeding the Pb GAC. Applying BAAC did not significantly change risk evaluation for these samples as many had Pb BAF>50%. In contrast, all samples that exceeded the As GAC were found to no longer exceed a minimal level of risk when oral bioaccessibility was considered. Oral bioaccessibility testing resulted in a 45% reduction in the number of sites identified as posing a potential risk to human health.

Assessment of land use management and its effect on soil quality and carbon stock in Ebonyi State, Southeast Nigeria.

Evaluating soil quality (SQ) resulting from land management use impact is important for soil carbon (C) monitoring, land sustainability and suitability. However, the data in less developed regions of Africa like Nigeria is scarce, limiting our understanding at global scale. The study evaluated land management use on soil quality in Ebonyi State, Nigeria, a representative region of Africa. Soil samples were collected in 2021 and resampled in 2022 from regions including five land use managements (FS = forest soil; GLS = grass land soil; ACS = alley cropping Soil; SDS = sewage dump-soils; CCS = continuously cultivated soil). Soil physical and chemical properties were analyzed and discussed. The results shows that soil physical properties (bulk density, hydraulic conductivity, aggregate stability) were significantly (P < 0.05) influenced by land use management. Moderate to high bulk density, very low hydraulic conductivity (HC), and low aggregate stability were observed across land management, suggesting potential inhibition to root penetration, poor aeration, and water infiltration. Improved land management practices such as planting of cover crops either for re-grassing or addition of crop residues could be adopted as conservative options for increasing soil quality and encourage additional soil C. Soil pH decreased with the increase in soil depth in all land uses for both years. A higher soil pH of 6.78 (slightly acidic) was seen in SDS and lower mean 6.0 (moderately acidic) was obtained in CCS at 0-20 cm in 2021. The average mean nitrogen content was rated "very high" (0.81 g kg-1 and 0.69 g kg-1) in 2021 and 2022 respectively, suggesting nitrogen might not be a limiting factor for plant growth in the region. During the 2021 and 2022 study periods, the overall average mean C stock were 12.71 g kg-1 and 15.87 g kg-1 respectively suggesting 3.1 g kg-1 C stock increment in 2022. Soil inorganic C also increased by 9.86 g cm-2 in 2022. The study provided crucial information about how land management use affected soil physico-chemical properties including C stock and suggested that C stock could be improved by adopting appropriate land management use practices. The results fill a data gap in under-studied regions, but also facilitate potential land management practices.

Degradation and environmental assessment of compostable packaging mixed with biowaste in full-scale industrial composting conditions.

The incorporation of representative commercial compostable materials into a full-scale open-air windrow composting process in an industrial site using household-separated biowaste was investigated. Two batches out of the same initial biowaste mixture were studied, one as control and the other containing initially 1.28 wt% of certified compostable plastics. No significant differences in the composting process were revealed. Compostable plastics exhibited a 98 wt% mass loss after 4 months, aligning with industrial composting times. The evolution of the morphology of the materials unveiled polymer specific degradation mechanisms. Both Safety requirements for organic farming were met. Ecotoxicity tests showed no adverse effects, agronomic fertilizing and amending quality was high, the materials compost even enhancing barley growth. The ecological impact assessment demonstrated an advantage for composting over incineration for seven of the eight indicators. In conclusion, this study shows the successful integration of compostable materials into industrial composting, upholding product safety and quality.