Posterior crossbite corrections in the early mixed dentition with quad helix or rapid maxillary expander: a cost-effectiveness analysis of a randomized controlled trial.

BACKGROUND: Unilateral posterior crossbite is a common malocclusion, and early treatment is recommended to enable normal growth. There are several possibilities regarding choice of appliances used for correcting this malocclusion; however, when treatment is financed by public funds the decision needs to be based not only on the effects but also on the effect in relation to the costs. OBJECTIVES: The aim was to perform a cost-effectiveness analysis comparing quad helix (QH) and rapid maxillary expanders (RME; hyrax-type) in children in the early mixed dentition. MATERIAL AND METHODS: Seventy-two patients were randomized to treatment with either QH or RME, at two different centres. Data were collected from the patient's medical records regarding success rate, number of visits, total treatment time, emergency visits, and so forth, together with answers from patient questionnaires concerning absence from school and use of analgesics. A cost-effectiveness analysis with both an intention-to-treat (ITT) and a per-protocol approach was performed, as well as a deterministic sensitivity analysis. RESULTS: The success rate, one year after the completion of the expansion, was equal between groups according to the ITT approach. From a healthcare perspective, the mean cost difference between RME and QH was €32.05 in favour of QH (P = 0.583; NS). From a societal perspective, the mean cost difference was €32.61 in favour of QH (P = 0.742; NS). The total appliance cost alone was higher in the RME group €202.67 resp. €155.58 in the QH group (P = 0.001). The probability of RME having a higher cost was 71% from a healthcare perspective and 62.7% from a societal perspective. The total treatment time was 97 days longer in the QH group. In the deterministic sensitivity analysis, when using a higher valuation of the children's educational loss, the QH becomes €58 more costly than the RME. There was a statistically significant difference in chair time and visits between centres (P < 0.001). CONCLUSION: The difference in costs between RME and QH is not statistically significant, however, there is a slightly higher probability that RME is more expensive than QH with a mean cost of an additional €32 per patient from a healthcare perspective. Different work procedures at different centres indicate that logistics around the patient's treatment is a more important aspect than appliance used to decrease the number of visits and save chair time and thereby also costs.

Assessment of early dental arch growth modification with removable maxillary expansion by cone-beam computed tomography and lateral cephalometric radiographs: a retrospective study.

BACKGROUND: This study evaluated the skeletal and dental changes of patients brought by early removable maxillary expansion (ERME) treatment to explore the clinical treatment effect of ERME on early dental arch growth modification. METHODS: Subject children aged 6-10 years with a maxillary transverse deficiency received ERME treatment, cone-beam computed tomography (CBCT) and lateral cephalometric radiographs were measured before and after treatment, and statistical differences in the measured items were evaluated with corresponding statistical methods to explore the skeletal and dental changes. RESULTS: After ERME treatment, there was a statistical increase in the maxillary basal bone arch width, nasal cavity width, maxillary alveolar bone arch width, and maxillary dental arch width. A buccal inclination of the maxillary alveolar bone and a buccal inclination and buccal movement in the alveolar bone of maxillary first molars were found. The maxillary skeletal expansion was statistically greater than the dental expansion. Increases in the mandibular alveolar bone arch width and dental arch width happened after treatment. A decrease in angle ANB and an increase in Ptm-A, U1-SN, U1-PP, L1-MP, and L6-MP were found after treatment. No statistical changes in the growth pattern-related measured items were observed. CONCLUSIONS: ERME could expand the maxillary basal bone arch width, nasal cavity width, maxillary alveolar bone arch width, and maxillary dental arch width. The maxillary skeletal expansion was greater than the dental expansion. Secondary increases in the mandibular alveolar bone and dental arch widths would happen after ERME. ERME would result in a mandibular advancement, a labial inclination of maxillary anterior teeth, and an increase of maxillary sagittal length, and would not change the patient's growth pattern. TRIAL REGISTRATION: This study was approved by the Institutional Review Board of the West China Hospital of Stomatology, Sichuan University. (WCHSIRB-D-2020-446).

Short-term assessment of pain and discomfort during rapid maxillary expansion with tooth-bone-borne and tooth-borne appliances: randomized clinical trial.

OBJECTIVE: The aim of this randomized clinical trial was to evaluate and compare, during the first week of rapid maxillary expansion (RME), the impact caused by two types of appliances: Hyrax and Hybrid Hyrax. METHODS: Forty-two patients who met the eligibility criteria (aged 11-14 years, with transverse maxillary deficiency, posterior crossbite, and presence of maxillary first premolars and first permanent molars) were selected and randomly divided into two groups: TBB GROUP (tooth-bone-borne expander), treated with Hybrid Hyrax (12 females and 9 males, mean age 13.3 ± 1.3 years), and TB GROUP (tooth-borne expander), treated with Hyrax (5 females and 16 males, mean age 13.3 ± 1.4 years). Pain and discomfort were assessed in two times: after the first day of activation (T1) and four days after, by means of the numerical rate scale and the instrument MFIQ (Mandibular Functional Impairment Questionnaire). Descriptive statistics and the Mann-Whitney test were used for comparison between groups and between sexes. A 5% significance level was adopted. RESULTS: Both appliances had a negative impact, generating pain and discomfort, and reducing functional capacity. However, the scores obtained were of low intensity and no significant differences were observed between the groups. Considering sexes, there were statistically significant differences, with the female sex presenting higher scores for pain and functional limitation. CONCLUSIONS: Despite causing impact in pain and increase in the functional limitation, these changes were of low intensity, with no statistical difference between the groups. Females were more sensitive to the impact caused by the RME.

Validity of the Maturation Stage Method in the Individual Assessment of Midpalatal Suture Ossification Before Maxillary Expansion: A Systematic Review / Validez del Método de la Etapa de Maduración en la Evaluación Individual de la Osificación de la Sutura Palatina Mediana Previo a la Expansión Maxilar: Una Revisión Sistemática

In 2013, midpalatal suture maturation stage assessment was proposed for the evaluation of patients before performing maxillary expansion. In this study, we aimed to analyze the association between the midpalatal suture maturation stages assessed by CBCT, according to the method described by Angelieri et al., and other objective methods used to assess skeletal maturation or bone fusion. A computerized database search was conducted using PubMed, Cochrane Library, SciELO, LILACS, Web of Science, and Scopus, without language restriction. Unpublished literature was searched on ClinicalTrials.gov, the National Research Register, and Pro-Quest Dissertation Abstracts and Thesis database. Authors were contacted when necessary, and reference lists of the included studies were screened. Search terms included midpalatal suture, maturation, correlation, diagnostic performance, classification, evaluation, assessment, and relationship. Quality assessment was performed using the Observational Cohort and Cross-Sectional Studies tool developed by the National Heart, Lung, and Blood Institute. Eleven studies met the inclusion criteria. Of all the studies included, 81.9% had fair qualit y and 18.1% good quality, respectively. Eight out of eleven studies assessed the correlation between the midpalatal suture maturation method and the skeletal maturity evaluated by CVM method (Spearman's correlation coefficient: 0.244-0.908). Two out of eleven studies evaluated the correlation between midpalatal suture maturation method and the skeletal maturity assessed by HWM method (Spearman's correlation coefficient: 0.904-0.905) Even though midpalatal suture maturation stage assessment needs an exhaustive training and calibration process, it is a valid method to evaluate skeletal maturation or bone fusion. From a clinical perspective, for patients at CS4, CS5 and CS6, an assessment of the midpalatal suture on CBCT is indicated. A similar assessment should be done in patients at SMI 7-9.

En 2013, se propuso un nuevo método para la evaluación del estadio de maduración de la sutura palatina mediana para la evaluación de los pacientes antes de realizar la expansión maxilar. En este estudio, nuestro objetivo fue analizar la asociación entre las etapas de maduración de la sutura palatina mediana evaluada en CBCT, según el método descrito por Angelieri et al., y otros métodos objetivos utilizados para evaluar la maduración esquelética o la fusión ósea. Se realizó una búsqueda en las bases de datos PubMed, Cochrane Library, SciELO, LILACS, Web of Science y Scopus, sin restricción de idioma. Se buscó literatura no publicada en ClinicalTrials.gov, el Registro Nacional de Investigación y la base de datos Pro-Quest Dissertation Abstracts and Thesis. Se estableció contacto con los autores cuando fue necesario y se revisaron las listas de referencias de los estudios incluidos. Los términos de búsqueda incluyeron sutura palatina mediana, maduración, correlación, rendimiento diagnóstico, clasificación, evaluación, valoración y relación. La evaluación de la calidad se realizó mediante la herramienta de Estudios transversales y de cohortes observacionales desarrollada por el Instituto Nacional del Corazón, los Pulmones y la Sangre. Once estudios cumplieron con los criterios de inclusión. Del total de estudios incluidos, el 81.9% tuvo calidad regular y el 18.1% calidad buena, respectivamente. Ocho de once estudios evaluaron la correlación entre el método de maduración de la sutura palatina mediana y la madurez esquelética evaluada por el método CVM (coeficiente de correlación de Spearman: 0.244-0.908). Dos de once estudios evaluaron la correlación entre el método de maduración de la sutura palatina mediana y la madurez esquelética evaluada por el método HWM (coeficiente de correlación de Spearman: 0.904-0.905). Aunque la evaluación del estado de maduración de la sutura palatina mediana necesita un proceso exhaustivo de entrenamiento y calibración, es un método válido para evaluar la maduración esquelética o la fusión ósea. Desde una perspectiva clínica, para pacientes en CS4, CS5 y CS6, está indicada una evaluación de la sutura palatina mediana en CBCT. Se debe realizar una evaluación similar en pacientes con SMI 7-9.

A novel method for assessment of human midpalatal sutures using CBCT-based geometric morphometrics and complexity scores.

INTRODUCTION: Management of dentofacial deficiencies requires knowledge about sutural morphology and complexity. The present study assesses midpalatal sutural morphology based on human cone-beam computed tomography (CBCT) using geometric morphometrics (GMM) and complexity scores. The study is the first to apply a sutural complexity score to human CBCT datasets and demonstrates the potential such a score has to improve objectiveness and comparability when analysing the midpalatal suture. MATERIALS AND METHODS: CBCTs of various age and sex groups were analysed retrospectively (n = 48). For the geometric morphometric analysis, landmark acquisition and generalised Procrustes superimposition were combined with principal component analysis to detect variability in sutural shape patterns. For complexity analysis, a windowed short-time Fourier transform with a power spectrum density (PSD) calculation was applied to resampled superimposed semi-landmarks. RESULTS: According to the GMM, younger patients exhibited comparable sutural patterns. With increasing age, the shape variation increased among the samples. The principal components did not sufficiently capture complexity patterns, so an additional methodology was applied to assess characteristics such as sutural interdigitation. According to the complexity analysis, the average PSD complexity score was 1.465 (standard deviation = 0.010). Suture complexity increased with patient age (p < 0.0001), but was not influenced by sex (p = 0.588). The intra-class correlation coefficient exceeded 0.9, indicating intra-rater reliability. CONCLUSION: Our study demonstrated that GMM applied to human CBCTs can reveal shape variations and allow the comparison of sutural morphologies across samples. We demonstrate that complexity scores can be applied to study human sutures captured in CBCTs and complement GMM for a comprehensive sutural analysis.

[Advances in assessment methods of midpalatal suture and its clinical application].

Rapid palatal expansion is commonly uesd to correct maxillary transverse deficiency. The timing and effects of palatal expansion, and the choice of palatal expansion devices are related to the condition of midpalatal suture. Nowadays, there are several methods to assess the condition of midpalatal suture, including physiological age, skeletal age, occlusal film, CT, ultrasonography and so on. This narrative review seeks to review these methods for assessment of midpalatal suture.

Radiographic and histological assessment of root resorption associated with conventional and mini-screw assisted rapid palatal expansion: a systematic review.

BACKGROUND AND OBJECTIVES: The aim of this systematic review and meta-analysis was to evaluate root resorption after maxillary expansion with conventional rapid palatal expansion (RPE) and mini-screw assisted rapid palatal expansion appliances (MARPE) using 2D and 3D radiographic methods and histologic methods of measuring root resorption. SEARCH METHODS AND SELECTION CRITERIA: A search of PubMed/MEDLINE, Scopus, Cochrane Central Register of Controlled Trials, CINAHL, Web of Science, Global Index Medicus, Dissertations & Theses Global, ClinicalTrials.gov registry, ISRCTN Registry, National Research Register, OpenGrey, and the Trip Database was performed. The studies that had analysed root resorption after RPE or MARPE were selected for the systematic review. DATA COLLECTION AND ANALYSIS: The database research, elimination of duplicate studies, data extraction, and risk of bias were performed by the authors independently and in duplication. This systematic review included prospective studies to evaluate root resorption following RPE after tooth-borne (TB), tooth-tissue borne (TTB), bone-borne (BB), and tooth-bone borne (TBB) expansion appliances. RESULTS: A total of 13 prospective trials (six randomized clinical trials and seven non-randomized prospective clinical trials) were identified for inclusion in this systematic review. Histological studies revealed that most teeth experience root resorption on the buccal surfaces after maxillary expansion. MARPE designs with BB and TBB expansion appliances were found to lead to reduced volumetric root resorption than conventional RPE using micro-computed tomography. However, one study using cone beam computed tomography showed no difference in the root resorption with MARPE and RPE designs. CONCLUSIONS AND IMPLICATIONS: Maxillary expansion with RPE can lead to root resorption of maxillary posterior teeth. Root resorption occurs more frequently on buccal surfaces on maxillary posterior teeth. Limited evidence suggests that MARPE may lead to reduced root resorption than RPE. REGISTRATION: This systematic review was conducted following the Cochrane handbook for systematic reviews and interventions and reported according to the guidelines of Preferred Reporting Items for Systematic Reviews and Meta-Analyses. The protocol was registered at PROSPERO database (https://www.crd.york.ac.uk/prospero/; registration number: PROSPERO CRD42021271181).

Alveolar defects before and after surgically assisted rapid palatal expansion (SARPE): a CBCT assessment.

INTRODUCTION: Surgically Assisted Rapid Palatal Expansion (SARPE) promote maxillary expansion in skeletally mature patients. This technique is effective; however, some side effects are still unknown. OBJECTIVES: evaluate the presence of alveolar defects (dehiscences and fenestrations) in patients submitted to the SARPE. The null hypothesis tested was: SARPE does not influence the number of dehiscences and fenestrationss. METHODS: A retrospective quasi-experiment study of a convenience sample of 279 maxillary teeth, in 29 patients evaluated with Cone Beam Computed Tomography (CBCT) at T1 (before SARPE), T2 (after expansion) and T3 (after retention), was performed. The examined teeth were: canines, first and second premolars, first and second molars. in axial, coronal, and cross-sectional views. The evaluations involved viewing slices from mesial to distal of the buccal roots. RESULTS: All statistical analyses were performed using SAS 9.3 and SUDAAN softwares. Alpha used in the study was 0.05. Alveolar defects increased statistically from T1 (69.0%) to T2 (96.5%) and T3 (100%). Dehiscences increased 195% (Relative Risk 2.95) at the end of expansion (T2). After retention (T3), individuals were on average 4.34 times more likely to develop dehiscences (334% increase). Fenestrations did not increase from T1 to T2 (p = 0.0162, 7.9%) and decreased from T2 to T3 (p = 0.0259, 4.3%). Presence of fenestrations at T1 was a significant predictor for the development of dehiscences in T2 and T3. Dehiscences increased significantly in all teeth, except second molars. CONCLUSION: The null hypothesis was rejected. After SARPE the number of dehiscences increased and fenestrations decreased. Previous alveolar defects were predictor for dehiscences after SARPE.

Assessment of the bone thickness of the palate on cone-beam computed tomography for placement of miniscrew-assisted rapid palatal expansion appliances.

INTRODUCTION: The correction of maxillary transverse discrepancy is achieved by means of rapid maxillary expansion, which may be performed by conventional or surgically-assisted rapid maxillary expansion, and more recently, by miniscrew-assisted rapid palatal expansion (MARPE). This study assessed the bone thickness of the palate on cone-beam computed tomography (CBCT) images for placement of mini-implants and anchorage of MARPE. METHODS: The sample consisted of 223 CBCT scans from patients of both genders (137 females and 86 males) aged ≥18 years. By using the Image Studio software (Anne Solutions, São Paulo, Brazil), measurements of the bone thickness of the palate were performed bilaterally, as follows: in the axial plane, the bone thicknesses were determined in the anterior region (distal face of the first premolars) and the posterior region (distal face of the first molars), at 3 mm and 6 mm laterally to the midpalatal suture. So in the sagittal plane, the bone thicknesses of the palate were measured in these placements from the palatal cortical to the nasal floor cortical in the anterior region at 30°, 45°, and 90°. In the posterior region, the bone thickness was determined only at 90°. The statistical tests used were the Kruskal-Wallis H test (analysis of variance on ranks) with Dunn's post-hoc test and Mann-Whitney U test (P <0.05). RESULTS: The bone thickness of the palate in the anterior region varied from 8.57 mm in women to 11.28 mm in men at 3 mm from the midpalatal suture and from 7.99 mm in women to 10.47 mm in men at 6 mm for 30°; from 6.35 mm in women to 9.28 mm in men at 3 mm from the midpalatal suture and from 6.20 mm in women to 8.88 mm in men at 6 mm for 45°; from 4.51 mm in women to 6.85 mm in men at 3 mm from the midpalatal suture and from 4.29 mm in women to 6.64 mm in men at 6 mm for 90°. In the posterior region, the bone thickness varied from 2.93 mm (3 mm from the suture) to 1.78 mm (6 mm from the suture) for women and from 3.24 mm (3 mm from the suture) to 1.99 mm (6 mm from the suture) for men. In general, the bone thickness of the palate is greater in the anterior region at 3 mm from the midpalatal suture at 30°. CONCLUSIONS: There was high variability in the bone thickness of the palate among patients and in different areas. Therefore, it is necessary to make an individualized diagnosis of the patient and manufacture the MARPE appliance carefully by performing a prior evaluation of the palatal bone thickness by means of CBCT to determine the ideal sites and inclinations for placement of mini-implants.

Long-term assessment of conventional and mini-screw-assisted rapid palatal expansion on the nasal cavity.

OBJECTIVES: To evaluate the long-term effects of mini-screw-assisted rapid palatal expansion (MARPE), rapid palatal expansion (RPE), and controls on the nasal cavity with cone-beam computed tomography (CBCT). MATERIALS AND METHODS: A total of 180 CBCT scans that were part of a previous randomized trial were evaluated retrospectively for 60 patients at pretreatment (T1), postexpansion (T2), and posttreatment (T3). Patients were randomly assigned into 3 groups: MARPE, RPE, and controls (time period T1 to T3; MARPE: 2 years 8 months; RPE: 2 years 9 months; control: 2 years 7 months). Nasal height, nasal length, nasion-ANS height, ANS-PNS length, pyriform height, and nasal septal deviation angle were measured. The changes in alar width, alar base width, anterior nasal cavity width, posterior nasal cavity width, maxillary intermolar width, and maxillary intercanine width were also evaluated. RESULTS: The alar base width, posterior nasal cavity width, anterior nasal cavity width, maxillary intercanine width, and maxillary intermolar width significantly increased (P < .05), and the nasal septal deviation angle significantly decreased (P < .05) in both the MARPE and RPE groups as compared with controls in the short term. In the long term, the nasal septal deviation angle was significantly decreased (P < .05) in the MARPE and RPE groups as compared with controls, and the posterior nasal cavity width was significantly increased (P < .05) in the MARPE group compared with the RPE group and controls. CONCLUSIONS: MARPE and RPE led to a significant increase in the nasal cavity and alar base width compared with controls in the short term. In the long term, a significant increase was observed only in the posterior nasal cavity width with MARPE. Both MARPE and RPE led to a minimal decrease in nasal septal deviation angle in comparison with controls.

Comparative Assessment of Anxiety, Pain, and Discomfort During Rapid Maxillary Expansion Using Two Different Activation Protocols in Patients With Cleft Lip and Palate.

OBJECTIVE: The aim of this study was to compare and assess the pain perception, anxiety, and discomfort between two different rapid maxillary expansion (RME) protocols in patients with unilateral cleft lip and palate (UCLP). DESIGN: This is a prospective study. SETTING: The study was done in a comprehensive cleft care center. PATIEN AND PARTICIPANTS: The sample included 26 patients between ages 6 and 9 years with a history of repaired UCLP. INTERVENTIONS: The patients were randomly allotted into 2 groups-Group A and Group B. Group A received 1 RME activation per day and Group B received 2 activations per day. The participants after RME activation completed a self-report questionnaire and ranked the pain and anxiety levels using Faces pain scale and Hamilton anxiety scale, respectively. The evaluation was done every day for 1 week. MAIN OUTCOME MEASURE: The Faces Pain Scale, Hamilton Anxiety Scale, and self-report questionnaires assessed the pain, anxiety, and discomfort experienced by the patients after 2 different types of RME activation protocols. RESULTS: Group B experienced significantly higher pain in the molars than Group A (P < .001). There was no significant difference between the 2 RME activation protocols regarding anxiety and jaw discomfort. CONCLUSION: Patients who received 2 activations per day experienced significantly higher levels of pain in the molars compared to the patients who received a single activation per day. There were no significant differences between the 2 activation protocols in terms of pain in the palate, tongue, anxiety, and jaw discomfort.

Three-dimensional assessment of asymmetric mid-palatal suture expansion assisted by a customized microimplant-supported rapid palatal expander in non-growing patients: Uncontrolled Clinical Trial.

OBJECTIVES: The objective was to evaluate the magnitude, incidence and possible factors of asymmetric expansion with a customized microimplant-supported rapid palatal expander (MARPE) in non-growing patients. SETTING AND SAMPLE POPULATION: This retrospective study included a sample of 49 patients (mean age: 23.9 ± 3.9 years) treated with a customized microimplant-supported rapid palatal expander. Based on the symmetry of expansion, the sample was divided into Group S (symmetric expansion group, n = 26) and Group A (asymmetric expansion group, n = 23). METHODS: Pre- and post-treatment cone-beam computed tomography (CBCT) images were superimposed to assess skeletal change in both studied groups. Seven variables were tested: unilateral crossbite, maxillary base cant, chin deviation, the initial asymmetrical position of the mid-palatal suture, split pattern of frontomaxillary suture, Angle's classification and dental arch crowding. Paired t-test and logistic regression analyses were utilized to evaluate the possible factors behind the asymmetric expansion. RESULTS: There was a significant difference (P < .01) between the studied groups. The average expansion was 4.26 mm at the anterolateral maxillary walls (BB) and 3.83 mm at the greater palatine foramen region (GPF). The average expansion at the GPF was 90% of that at the BB. The frequency of asymmetric expansion was 46.9%. Among the seven tested variables, the presence of the initial asymmetric position of the mid-palatal suture is the only variable that showed correlation with asymmetric expansion. CONCLUSION: Initial asymmetric position of the mid-palatal suture is considered a contributing factor of skeletal asymmetric expansion following microimplant-supported rapid palatal expansion in skeletally comparable patients.

Does rapid maxillary expansion enlarge the nasal cavity and pharyngeal airway? A three-dimensional assessment based on validated analyses.

OBJECTIVES: To evaluate the three-dimensional changes following rapid maxillary expansion (RME) of the nasal cavity (NC) and pharyngeal airway (PA) in growing patients, using innovative and validated evaluation methods and to investigate whether a correlation between skeletal expansion and increase in airway volume exists. SETTINGS AND SAMPLE POPULATION: Records of patients who had cone beam computed tomography taken before and after orthodontic treatment with or without RME were retrospectively collected and divided into two groups: (a) RME, 39 patients (mean age 10.40 ± 1.74 years); and (b) control, 29 patients, matched for age (mean age 11.07 ± 1.45 years) and follow-up period. MATERIAL AND METHODS: Total and partial volumes of the NC and the PA were calculated. The PA centerline was determined to assess the minimal cross-sectional area and hydraulic diameter. Paired and unpaired t test were applied to compare the difference between time points and between groups. One-way ANOVA and post hoc Tukey's tests were used to compare subgroups with respect to changes in palatal width and lacrimal ducts distance. RESULTS: All of the NC, PA and skeletal parameters were significantly enlarged after RME. The NC volume and inter-molar distance in the RME were significantly larger compared to the control group. The initially lower mean values of minimal cross-sectional area and hydraulic diameter in the RME group when compared to the control group normalized after RME treatment. CONCLUSIONS: Based on validated analyses, the NC volume increase was evident after RME in the long term after controlling for growth.

Assessment of Maxillary Expansion by Piezocision-Assisted Orthodontics: A Pilot Study.

The correction of transverse malocclusions due to maxillary width deficiency in adults is challenging. Multiple surgical and nonsurgical procedures have been used in conjunction with orthodontics to address this situation, and most common is the surgically assisted rapid maxillary expansion (SA-RME). Although successful, it is quite aggressive. The present investigation assesses the usefulness of Piezocision-assisted orthodontics as a less-invasive option for treatment of transverse maxillary deficiencies in adults. Dental casts were taken before and after Piezocision-assisted palatal expansion in four patients. They were digitized into STL files and superimposed. Differences on cross-arch tooth torque, angulation/tipping, and movement distances between time points were quantified using a digital static and a novel digital 3D-movement evaluation method. For the buccolingual movement per tooth, first premolars averaged 3.33 ± 1.3 mm, second premolars averaged 3.63 ± 0.6 mm, and first and second molars averaged 1.56 ± 1.2 mm and 0.36 ± 1.2 mm, respectively. Bodily movement of the teeth was observed with minimal tipping and no development of gingival recessions. Piezocision-assisted palatal expansion is a safe and reliable procedure that can help patients with maxillary width deficiency. It is a new tool in the orthodontist's armamentarium that can be used as an accelerator of treatment and as a new way to solve orthodontic challenges in selected adult patients.

Three-dimensional assessment of the spheno-occipital synchondrosis and clivus after tooth-borne and bone-borne rapid maxillary expansion.

OBJECTIVES: To assess changes in spheno-occipital synchondrosis after rapid maxillary expansion (RME) performed with conventional tooth-borne (TB) and bone-borne (BB) appliances. MATERIALS AND METHODS: This study included 40 subjects with transverse maxillary deficiency who received TB RME or BB RME. Cone-beam computed tomography images (CBCT) were taken before treatment (T0), and after a 6-month retention period (T1). Three-dimensional surface models of the spheno-occipital synchondrosis and basilar part of the occipital bone were generated. The CBCTs taken at T0 and T1 were registered at the anterior cranial fossa via voxel-based superimposition. Quantitative evaluation of Basion displacement was performed with linear measurements and Euclidean distances. The volume of the synchndrosis was also calculated for each time point as well as the Nasion-Sella-Basion angle (N-S-Ba°). All data were statistically analyzed to perform inter-timing and intergroup comparisons. RESULTS: In both groups, there was a small increment of the volume of the synchondrosis and of N-S-Ba° (P < .05). Basion showed a posterosuperior pattern of displacement. However, no significant differences (P > .05) were found between the two groups. CONCLUSIONS: Although TB and BB RME seemed to have some effects on the spheno-occipital synchondrosis, differences were very small and clinically negligible.

Assessment of pulp volume changes after surgically assisted rapid palatal expansion.

Maxillary transverse deficiency is a common skeletal problem. When the patient is younger, it is treated by rapid palatal expansion by using orthodontic appliances. If this fails or the patient is older, which means skeletal growth is completed, surgically aided rapid palatal expansion (SARPE) becomes necessary. In this technique, after the osteotomies have been made, the two maxillary bones are distracted by tooth-borne device. Since a tooth-borne device will apply the distraction forces on the teeth, the pulp volumes may change. Our aim was to investigate the volume changes of the tooth pulps after SARPE in which a tooth-borne device was used. We scanned our database and included 20 patients (7 males and 13 females) aging between 16 and 30 (mean 19.5±3.97) to this retrospective study. All the patients had undergone SARPE surgeries and they had pre-surgery and postconsolidation cone beam computerized tomography (CBCT) images. All the surgeries had been done in similar ways; all the patients had used similar tooth-borne modified acrylic bonded expansion device. We divided the maxillary teeth into three groups: the incisors, the premolars and the molars. We imported the CBCT images of each patient into 3D Slicer software. We calculated volumes of pulps for all maxillary teeth. We compared volumes with paired t test. Statistical significance level was accepted as P< .05. The devices had been left in place between 83 and 179 days including distraction and consolidation periods (mean 121.35±27.83 days). Amount of the expansions varied between 6.03mm and 11.16mm (mean 7.19±1.18mm). We found a statistically significant decrease of the pulp volumes in incisor, premolar and molar teeth (P<.001) between pre-surgery and postconsolidation periods. When using tooth-borne devices in SARPE, their impacts on teeth pulps should also be considered.

An assessment of the magnitude, parallelism, and asymmetry of micro-implant-assisted rapid maxillary expansion in non-growing patients.

BACKGROUND AND OBJECTIVES: Micro-implant-assisted expanders have shown significant effects on the mid-face, including a degree of asymmetry. The aim of this study is to quantify the magnitude, parallelism, and asymmetry of this type of expansion in non-growing patients. METHODS: A retrospective study on a sample of 31 non-growing patients with an average age of 20.4 years old, with cone beam computed tomography images taken before and right after expansion using maxillary skeletal expander (MSE) were assessed for skeletal expansion at three landmarks bilaterally. RESULTS: Average magnitude of total expansion was 4.98 mm at the anterior nasal spine (ANS) and 4.77 mm at the posterior nasal spine (PNS) which showed statistical significance using a paired t test with p < 0.01. Average expansion at the PNS was 95% of that at the ANS. The sample was divided into symmetric (n = 15) and asymmetric (n = 16) based on the difference in expansion at the ANS, with 16 out of 31 patients exhibiting statistically significant asymmetry. CONCLUSIONS: MSE achieves distinctly parallel expansion in the sagittal plane but can exhibit asymmetrical expansion in the transverse plane.

Tomographic assessment of palatal suture opening pattern and pterygopalatine suture disarticulation in the axial plane after midfacial skeletal expansion.

OBJECTIVE: The purpose of this study was to assess the palatal suture opening and the pterygopalatine suture disarticulation pattern in the tomographic axial plane after treatment with midfacial skeletal expander (MSE). MATERIALS AND METHODS: Pre- and post-expansion CBCT records of 50 subjects (20 males, 30 females, mean age 18 ± 3 years) who were treated with MSE (Biomaterials Korea, Seoul, Korea) appliance were superimposed and compared using OnDemand software. Reference planes were identified and the angulation of the midpalatal suture opening after expansion was calculated as well as the frequency of the pterygopalatine suture split. RESULTS: After MSE treatment, the mean palatal suture opening angle (SOA) was 0.57°. (- 0.8° to 1.3°). There was no significant difference between males and females in terms of the palatal suture opening pattern (P > 0.05). Only 3 out of 50 (6%) subjects presented SOA above 1 degree. Also, 3 out of 50 (6%) patients presented a negative SOA value. With regard to the pterygopalatine suture split, 84 sutures out of 100 (84%) presented openings between the medial and lateral pterygoid plates on both right and left sides. Partial split was detected with 8 patients (5 females, 3 males). Five patients had split only in the medial pterygoid plates of both pterygomaxillary sutures, and 3 patients exhibited disarticulation on the right side only. No significant differences were found in the frequency of suture opening between males and females (P = 1.000). CONCLUSIONS: MSE appliance performed almost parallel expansion in the axial view. Remarkably, this study shows that pterygopalatine suture can be split by MSE appliance without the surgical intervention; the disarticulation of pterygopalatine suture was visible in most of the patients.

Differential assessment of skeletal, alveolar, and dental components induced by microimplant-supported midfacial skeletal expander (MSE), utilizing novel angular measurements from the fulcrum.

BACKGROUND: In order to assess skeletal expansion, alveolar bone bending, and dental tipping after maxillary expansion, linear and angular measurements have been performed utilizing different craniofacial references. Since the expansion with midfacial skeletal expander (MSE) is archial in nature, the aim of this paper is to quantify the differential components of MSE expansion by calculating the fulcrum locations and applying a novel angular measurement system. METHODS: Thirty-nine subjects with a mean age of 18.2 ± 4.2 years were treated with MSE. Pre- and post-expansion CBCT records were superimposed and compared. The rotational fulcrum of the zygomaticomaxillary complex was identified by localizing the interfrontal distance and modified interfrontal distance. Based on the fulcrum, a novel angular measurement method is presented and compared with a conventional linear method to assess changes of the zygomaticomaxillary complex, dentoalveolar bone, and maxillary first molars. RESULTS: From 39 patients, 20 subjects have the rotational fulcrum of the zygomaticomaxillary complex at the most distant points of the interfrontal distance (101.6 ± 4.7 mm) and 19 subjects at the most distant points of the modified interfrontal distance (98.9 ± 5.7 mm). Linear measurements accounted for 60.16% and 56.83% of skeletal expansion, 16.15% and 16.55% of alveolar bone bending, and 23.69% and 26.62% of dental tipping for right and left side. Angular measurements showed 96.58% and 95.44% of skeletal expansion, 0.34% and 0.33% alveolar bone bending, and 3.08% and 4.23% of dental tipping for the right and left sides. The frontozygomatic, frontoalveolar, and frontodental angles were not significant different (P > 0.05). CONCLUSIONS: In the coronal plane, the center of rotation for the zygomaticomaxillary complex was located at the most external and inferior point of the zygomatic process of the frontal bone or slightly above and parallel to the interfrontal distance. Due to the rotational displacement of the zygomaticomaxillary complex, angular measurements should be a preferred method for assessing the expansion effects, instead of the traditional linear measurement method.

[Tongue position assessment in patients before and after maxilla expansion]. / Otsenka polozheniya yazyka u patsientov s suzheniem verkhnei chelyusti do i posle ee rasshireniya.

The aim of this research is to increase the accuracy of determining the position of the tongue, the amount of space occupied by the tongue and space, free from tongue, increase of efficiency of diagnostics of dentofacial anomalies in patients based on CBCT analysis-the study of the skull conducted in transversal, sagittal and coronal planes. Clinical and x-ray examination and orthodontic treatment were carried out in 120 patients with anomalies of the dentition complex. Patients were divided into three groups. Group 1 - 30 patients aged 5 to 11 years. Group 2 - 50 patients aged 12 to 17 years. Group 3 - 40 patients aged 18 to 40 years. All patients underwent CT examination of the skull before treatment, and during the retention period of treatment. After a diagnostic examination of the proposed method for diagnosing the anatomical and functional state of the dentition complex and drawing up a treatment plan, all patients underwent orthodontic treatment, which consisted in the expansion of the upper jaw using various orthodontic appliances for expansion. This method allows to identify anomalies in the position of the tongue before and after orthodontic treatment, to assess the quality of orthodontic treatment, based on the analysis of not only the tongue filling the space of the dome of the palate, but also the position of the bone structures of the skull in three planes. The high quality of the study allows us to give a reliable assessment of the state of maxillofacial structures: the position of the upper and lower jaws, inclination of teeth, the stage of formation of the patient's growth, airway lumen and the influence of tongue on these structures at different stages of development of the maxillofacial skull. When comparing the results of the study, not all patients carried out recovered the anatomical and functional balance of the maxillofacial complex after orthodontic treatment, suggesting the need for more myogymnastics of the tongue before, during, and after treatment.