Microfluidic devices for diagnostic applications.

Microfluidic systems have become an attractive platform for diagnostic applications. The technology not only allows drastically decreased assay volumes (down to picoliters), but also accelerates sample processing and readout. In this article we give an overview of the different kinds of systems, ranging from non- or minimally instrumented point-of-care devices for the detection of pathogens to fully-instrumented cutting-edge technologies such as next-generation sequencing and droplet-based microfluidics. We expect that microfluidic systems will have a major impact on future diagnostic (e.g., disposable devices) and therapeutic approaches (e.g., personalized medicine). Here we summarize current trends and critically review the limitations.

Unconventional low-cost fabrication and patterning techniques for point of care diagnostics.

The potential of rapid, quantitative, and sensitive diagnosis has led to many innovative 'lab on chip' technologies for point of care diagnostic applications. Because these chips must be designed within strict cost constraints to be widely deployable, recent research in this area has produced extremely novel non-conventional micro- and nano-fabrication innovations. These advances can be leveraged for other biological assays as well, including for custom assay development and academic prototyping. The technologies reviewed here leverage extremely low-cost substrates and easily adoptable ways to pattern both structural and biological materials at high resolution in unprecedented ways. These new approaches offer the promise of more rapid prototyping with less investment in capital equipment as well as greater flexibility in design. Though still in their infancy, these technologies hold potential to improve upon the resolution, sensitivity, flexibility, and cost-savings over more traditional approaches.

Lab-on-a-Foil: microfluidics on thin and flexible films.

This critical review is motivated by an increasing interest of the microfluidics community in developing complete Lab-on-a-Chip solutions based on thin and flexible films (Lab-on-a-Foil). Those implementations benefit from a broad range of fabrication methods that are partly adopted from well-established macroscale processes or are completely new and promising. In addition, thin and flexible foils enable various features like low thermal resistance for efficient thermocycling or integration of easily deformable chambers paving the way for new means of on-chip reagent storage or fluid transport. From an economical perspective, Lab-on-a-Foil systems are characterised by low material consumption and often low-cost materials which are attractive for cost-effective high-volume fabrication of self-contained disposable chips. The first part of this review focuses on available materials, fabrication processes and approaches for integration of microfluidic functions including liquid control and transport as well as storage and release of reagents. In the second part, an analysis of the state of Lab-on-a-Foil applications is provided with a special focus on nucleic acid analysis, immunoassays, cell-based assays and home care testing. We conclude that the Lab-on-a-Foil approach is very versatile and significantly expands the toolbox for the development of Lab-on-a-Chip solutions.

Optical detection in microfluidic systems.

Optical detection schemes continue to be favoured for measurements in microfluidic systems. A selection of the latest progress mainly within the last two years is critically reviewed. Emphasis is on integrated solutions, such as planar waveguides, coupling schemes to the outside world, evanescent-wave based detectors and the field of optofluidics. The perspectives and limitations of the different solutions are discussed in terms of analytical performance and fabrication costs. There has been an increased focus on cheap solutions in polymer materials that are amenable for mass production in order to ease commercialisation of the devices. This work will hopefully result in more commercial products that benefit from integrated optics, because the impact on commercial devices so far has been modest.

Nanotechnology and the chip.

This is the first article in a series on the impact nanotechnology is having on different types of devices. It considers how lab-on-a-chip approaches in diagnostics are evolving and discusses some areas of future development.

Lab-on-a-chip in vitro compartmentalization technologies for protein studies.

In vitro compartmentalization (IVC) is a powerful tool for studying protein-protein reactions, due to its high capacity and the versatility of droplet technologies. IVC bridges the gap between chemistry and biology as it enables the incorporation of unnatural amino acids with modifications into biological systems, through protein transcription and translation reactions, in a cell-like microdrop environment. The quest for the ultimate chip for protein studies using IVC is the drive for the development of various microfluidic droplet technologies to enable these unusual biochemical reactions to occur. These techniques have been shown to generate precise microdrops with a controlled size. Various chemical and physical phenomena have been utilized for on-chip manipulation to allow the droplets to be generated, fused, and split. Coupled with detection techniques, droplets can be sorted and selected. These capabilities allow directed protein evolution to be carried out on a microchip. With further technological development of the detection module, factors such as addressable storage, transport and interfacing technologies, could be integrated and thus provide platforms for protein studies with high efficiency and accuracy that conventional laboratories cannot achieve.

Microfluidics: a technology coming of age.

The number of applications and products utilising microfluidics technology has been growing rapidly. This article highlights the progress of this maturing technology and the significant factors that make it a valuable tool for new product development.

Microfluidic platforms for lab-on-a-chip applications.

We review microfluidic platforms that enable the miniaturization, integration and automation of biochemical assays. Nowadays nearly an unmanageable variety of alternative approaches exists that can do this in principle. Here we focus on those kinds of platforms only that allow performance of a set of microfluidic functions--defined as microfluidic unit operations-which can be easily combined within a well defined and consistent fabrication technology to implement application specific biochemical assays in an easy, flexible and ideally monolithically way. The microfluidic platforms discussed in the following are capillary test strips, also known as lateral flow assays, the "microfluidic large scale integration" approach, centrifugal microfluidics, the electrokinetic platform, pressure driven droplet based microfluidics, electrowetting based microfluidics, SAW driven microfluidics and, last but not least, "free scalable non-contact dispensing". The microfluidic unit operations discussed within those platforms are fluid transport, metering, mixing, switching, incubation, separation, droplet formation, droplet splitting, nL and pL dispensing, and detection.

Engineering challenges of BioNEMS: the integration of microfluidics, micro- and nanodevices, models and external control for systems biology.

Systems biology, i.e. quantitative, postgenomic, postproteomic, dynamic, multiscale physiology, addresses in an integrative, quantitative manner the shockwave of genetic and proteomic information using computer models that may eventually have 10(6) dynamic variables with non-linear interactions. Historically, single biological measurements are made over minutes, suggesting the challenge of specifying 10(6) model parameters. Except for fluorescence and micro-electrode recordings, most cellular measurements have inadequate bandwidth to discern the time course of critical intracellular biochemical events. Micro-array expression profiles of thousands of genes cannot determine quantitative dynamic cellular signalling and metabolic variables. Major gaps must be bridged between the computational vision and experimental reality. The analysis of cellular signalling dynamics and control requires, first, micro- and nano-instruments that measure simultaneously multiple extracellular and intracellular variables with sufficient bandwidth; secondly, the ability to open existing internal control and signalling loops; thirdly, external BioMEMS micro-actuators that provide high bandwidth feedback and externally addressable intracellular nano-actuators; and, fourthly, real-time, closed-loop, single-cell control algorithms. The unravelling of the nested and coupled nature of cellular control loops requires simultaneous recording of multiple single-cell signatures. Externally controlled nano-actuators, needed to effect changes in the biochemical, mechanical and electrical environment both outside and inside the cell, will provide a major impetus for nanoscience.

[Application of microfluidic-chip in biomedicine].

As a novel analytical technology, the research of Micro total analysis systems (micro-TAS) has been spreading rapidly. micro-TAS has been widely used to perform chemical and biochemical analysis. Microfluidic-based analytical system as micro-TAS's manily direction develops very fast in terms of it's reaction speed, reagent consumption, miniaturization, cost, and automation. After having proven the value of microfluidics for genetic, proteomic and cytomics analysis, this article also anticipates the development tendency of this technology in the biology medicine domain. It has demonstrated that a truly, easy-to-handle Microfluidic-based analytical device will be emerged in the future.

Micro- and nanotechnology in cell separation.

This review describes recent work in cell separation using micro- and nanoscale technologies. These devices offer several advantages over conventional, macroscale separation systems in terms of sample volumes, low cost, portability, and potential for integration with other analytical techniques. More importantly, and in the context of modern medicine, these technologies provide tools for point-of-care diagnostics, drug discovery, and chemical or biological agent detection. This review describes work in five broad categories of cell separation based on (1) size, (2) magnetic attraction, (3) fluorescence, (4) adhesion to surfaces, and (5) new emerging technologies. The examples in each category were selected to illustrate separation principles and technical solutions as well as challenges facing this rapidly emerging field.

Transition of MEMS technology to nanofabrication.

The transition of MEMS technology to nano fabrication is a solution to the growing demand for smaller and high-density feature sizes in the nanometer scale. Nanoimprint lithography (NIL) techniques for fabricating micro- and nano-features are discussed including hot embossing lithography (HEL), UV Molding (UVM) and micro contact printing (microCP). Recent results in micro and nano-pattern transfer are presented where features ranged from < 100 nm to several centimeters. We also present a comparative study between standard glass microfluidic chips and their HEL counterparts by metrology. Hot-embossed microfluidic chips are shown to be faithful replicates of their parent stamps. NIL is presented as a promising avenue for low-cost, high throughput micro and nano-device fabrication.

Disposable microfluidic devices: fabrication, function, and application.

This review article describes recent developments in microfluidics, with special emphasis on disposable plastic devices. Included is an overview of the common methods used in the fabrication of polymer microfluidic systems, including replica and injection molding, embossing, and laser ablation. Also described are the different methods by which on-chip operations--such as the pumping and valving of fluid flow, the mixing of different reagents, and the separation and detection of different chemical species--have been implemented in a microfluidic format. Finally, a few select biotechnological applications of microfluidics are presented to illustrate both the utility of this technology and its potential for development in the future.