Greenness and whiteness assessment of a sustainable voltammetric method for difluprednate estimation in the presence of its alkaline degradation product.

Nowadays, scientists are currently attempting to lessen the harmful effects of chemicals on the environment. Stability testing identifies how a drug's quality changes over time. The current work suggests a first and sustainable differential pulse voltammetry technique for quantifying difluprednate (DIF) as an anti-inflammatory agent in the presence of its alkaline degradation product (DEG). The optimum conditions for the developed method were investigated with a glassy carbon electrode and a scan rate of 100 mV s-1. The linearity range was 2.0 × 10-7-1.0 × 10-6 M for DIF. DIF was found to undergo alkaline degradation, when refluxed for 8 h using 2.0 M NaOH, and DEG was successfully characterized utilizing IR and MS/MS. The intended approach demonstrated the selectivity for DIF identification in pure, pharmaceutical, and degradation forms. The student's t-test and F value were used to compare the suggested and reported approaches statistically. The results were validated according to ICH requirements. The greenness of the studied approach was evaluated using the Green Analytical Procedure Index and the Analytical Greenness metric. Additionally, the whiteness features of the proposed approach were examined with the recently released red, green, and blue 12 model, and the recommended strategy performed better than the reported approaches in greenness and whiteness.

Low-cost inkjet-printed nanostructured biosensor based on CRISPR/Cas12a system for pathogen detection.

The escalating global incidence of infectious diseases caused by pathogenic bacteria, especially in developing countries, emphasises the urgent need for rapid and portable pathogen detection devices. This study introduces a sensitive and specific electrochemical biosensing platform utilising cost-effective electrodes fabricated by inkjet-printing gold and silver nanoparticles on a plastic substrate. The biosensor exploits the CRISPR/Cas12a system for detecting a specific DNA sequence selected from the genome of the target pathogen. Upon detection, the trans-activity of Cas12a/gRNA is triggered, leading to the cleavage of rationally designed single-strand DNA reporters (linear and hairpin) labelled with methylene blue (ssDNA-MB) and bound to the electrode surface. In principle, this sensing mechanism can be adapted to any bacterium by choosing a proper guide RNA to target a specific sequence of its DNA. The biosensor's performance was assessed for two representative pathogens (a Gram-negative, Escherichia coli, and a Gram-positive, Staphylococcus aureus), and results obtained with inkjet-printed gold electrodes were compared with those obtained by commercial screen-printed gold electrodes. Our results show that the use of inkjet-printed nanostructured gold electrodes, which provide a large surface area, in combination with the use of hairpin reporters containing a poly-T loop can increase the sensitivity of the assay corresponding to a signal variation of 86%. DNA targets amplified from various clinically isolated bacteria, have been tested and demonstrate the potential of the proposed platform for point-of-need applications.

Biosensors for psychiatric biomarkers in mental health monitoring.

Psychiatric disorders are associated with serve disturbances in cognition, emotional control, and/or behavior regulation, yet few routine clinical tools are available for the real-time evaluation and early-stage diagnosis of mental health. Abnormal levels of relevant biomarkers may imply biological, neurological, and developmental dysfunctions of psychiatric patients. Exploring biosensors that can provide rapid, in-situ, and real-time monitoring of psychiatric biomarkers is therefore vital for prevention, diagnosis, treatment, and prognosis of mental disorders. Recently, psychiatric biosensors with high sensitivity, selectivity, and reproducibility have been widely developed, which are mainly based on electrochemical and optical sensing technologies. This review presented psychiatric disorders with high morbidity, disability, and mortality, followed by describing pathophysiology in a biomarker-implying manner. The latest biosensors developed for the detection of representative psychiatric biomarkers (e.g., cortisol, dopamine, and serotonin) were comprehensively summarized and compared in their sensitivities, sensing technologies, applicable biological platforms, and integrative readouts. These well-developed biosensors are promising for facilitating the clinical utility and commercialization of point-of-care diagnostics. It is anticipated that mental healthcare could be gradually improved in multiple perspectives, ranging from innovations in psychiatric biosensors in terms of biometric elements, transducing principles, and flexible readouts, to the construction of 'Big-Data' networks utilized for sharing intractable psychiatric indicators and cases.

Analysis of atorvastatin in environmental waters: Validation of an electrochemical molecularly imprinted polymer sensor with application of life cycle assessment.

The widespread presence of pharmaceuticals in wastewater effluents after treatment stands as a significant challenge faced in the field of wastewater management and public health. Governments and the scientific community have worked to meet this urgent need for effective solutions. Nevertheless, the development of detection strategies for pharmaceutical monitorization capable of delivering rapid, on-site, and sensitive responses remains an ongoing necessity. In this work, the performance of a previously developed molecularly imprinted polymer (MIP) based electrochemical sensor for detecting atorvastatin (ATV) in wastewater effluents and surface waters is presented. A simple preconcentration method followed by electrochemical measurements by differential pulse voltammetry (DPV) in 0.1 M phosphate buffer (pH = 7), was implemented. The analytical results were validated with those obtained on a set of 16 water samples by ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS). Additionally, a life cycle assessment (LCA) was conducted to compare the environmental impact of both methodologies. The results obtained demonstrated that ATV detection using MIP-sensor was reliable when compared to the results found by UHPLC-MS/MS presenting a robust linear correlation coefficient of 0.843. The LCA results show that the novel MIP-sensor technique has lower associated environmental impacts than UHPLC-MS/MS, when the current analytical protocol for pharmaceuticals detection is applied. These findings highlight the potential of the developed MIP-sensor as an eco-friendly analytical tool for routine analysis and point-of-care monitoring of ATV in WWTP wastewater and surface water samples.

Utilizing nanotechnology to boost the reliability and determine the vertical load capacity of pile assemblies.

Because of their high electrocatalytic activity, sensitivity, selectivity, and long-term stability in electrochemical sensors and biosensors, numerous nanomaterials are being used as suitable electrode materials thanks to developments in nanotechnology. Electrochemical sensors and biosensors are two areas where two-dimensional layered materials (2DLMs) are finding increasing utility due to their unusual structure and physicochemical features. Nanosensors, by their unprecedented sensitivity and minute scale, can probe deeper into the structural integrity of piles, capturing intricacies that traditional tools overlook. These advanced devices detect anomalies, voids, and minute defects in the pile structure with unparalleled granularity. Their effectiveness lies in detection and their capacity to provide real-time feedback on pile health, heralding a shift from reactive to proactive maintenance methodologies. Harvesting data from these nanosensors, data was incorporated into a probabilistic model, executing the reliability index calculations through Monte Carlo simulations. Preliminary outcomes show a commendable enhancement in the predictability of vertical bearing capacity, with the coefficient of variation dwindling by up to 12%. The introduction of nanosensors facilitates instantaneous monitoring and fortifies the long-term stability of pile foundations. This study accentuates the transformative potential of nanosensors in geotechnical engineering.

A low-cost voltammetric sensor based on multi-walled carbon nanotubes for highly sensitive and accurate determination of nanomolar levels of the anticancer drug Ribociclib in bulk and biological fluids.

In this study, we present the development and comprehensive characterization of the first electrochemical sensor utilizing multi-walled carbon nanotubes (MWCNTs) for the sensitive and precise detection of Ribociclib (RIBO), an important anticancer drug. The sensor underwent systematic optimization, focusing on critical parameters such as pH, deposition potential, and cumulative time to enhance its electrocatalytic activity and expand the linear range for RIBO determination. The MWCNTs/GCE sensor exhibited excellent reproducibility and repeatability, ensuring reliable and consistent results. The applicability and feasibility of the sensor for real sample analysis were extensively evaluated by analyzing human serum, urine, and tablet samples using the standard addition method. The obtained percent recovery values demonstrated the sensor's exceptional accuracy and precision. Furthermore, interference studies revealed the sensor's remarkable selectivity, with minimal impact from common interfering substances. The developed sensor displayed a wide linear range of 0.01 µM to 5.0 µM, with a limit of detection (LOD) and limit of quantification (LOQ) calculated to be 0.69 nM and 2.31 nM, respectively, affirming its high sensitivity for detecting low RIBO concentrations. The MWCNTs/GCE sensor demonstrates substantial promise for diverse practical applications with its simplicity, cost-effectiveness, and excellent analytical performance.

The High Stability and Selectivity of Electrochemical Sensor Using Low-Cost Diamond Nanoparticles for the Detection of Anti-Cancer Drug Flutamide in Environmental Samples.

In this study, a novel electrochemical sensor was created by fabricating a screen-printed carbon electrode with diamond nanoparticles (DNPs/SPCE). The successful development of the sensor enabled the specific detection of the anti-cancer drug flutamide (FLT). The DNPs/SPCE demonstrated excellent conductivity, remarkable electrocatalytic activity, and swift electron transfer, all of which contribute to the advantageous monitoring of FLT. These qualities are critical for monitoring FLT levels in environmental samples. Various structural and morphological characterization techniques were employed to validate the formation of the DNPs. Remarkably, the electrochemical sensor demonstrated a wide linear response range (0.025 to 606.65 µM). Additionally, it showed a low limit of detection (0.023 µM) and high sensitivity (0.403 µA µM-1 cm-2). Furthermore, the practicability of DNPs/SPCE can be successfully employed in FLT monitoring in water bodies (pond water and river water samples) with satisfactory recoveries.

A low-cost miniature immunosensor for haemoglobin as a device for the future detection of gastrointestinal bleeding.

Gastrointestinal bleeding (GIB) is a serious medical condition, which requires immediate attention to establish the cause of the bleeding. Here, we present the development of a miniaturised electrochemical impedance spectroscopy (EIS) device for the detection of GIB. The device performs EIS measurements up to 100 kHz. Following the development of an immunosensor for haemoglobin (Hb) on screen printed electrodes, the EIS device was used for detecting Hb as an early indication of bleeding. The sensor was able to detect Hb in a redox solution in a linear range between 5 µg mL-1 and 60 µg mL-1, with a limit of detection of 13.3 µg mL-1. It was also possible to detect Hb in simulated intestinal fluid, without the need for a redox solution, within a range of 10 µg mL-1 to 10 mg mL-1 with a limit of detection of 2.31 mg mL-1. The miniature EIS device developed in this work is inexpensive, with an estimated cost per unit of £30, and has shown a comparable performance to existing commercial tools, demonstrating its potential to be used in the future as an ingestible sensor to detect GIB. All these measurements were carried out in a purpose built flow cell with supporting hardware electronics outside the cell. Integration of the hardware and the sensing electrodes was demonstrated in pill form. This pill after integration sampling fluidics has potential to be used in detecting gastrointestinal bleeding.

Electrochemical water softening technology: From fundamental research to practical application.

In recent decades, the environmentally benign electrochemical softening process has been gaining widespread interest as an emerging alternative for water softening. But, in spite of decades of research, the fundamental advances in laboratory involving electrolytic cell design and treatment system development have not led to urgently needed improvements in industrially practicable electrochemical softening technique. In this review, we firstly provide the critical insights into the mechanism of the currently widely used cathode precipitation process and its inherent limitations, which seriously impede its wide implementation in industry. To relieve the above limitations, some cutting-edge electrochemically homogeneous crystallization systems have been developed, the effectiveness of which are also comprehensively summarized. In addition, the pros and cons between cathode precipitation and electrochemically homogeneous crystallization systems are systematically outlined in terms of performance and economic evaluation, potential application area, and electrolytic cell and system complexity. Finally, we discourse upon practical challenges impeding the industrial-scale deployment of electrochemical water softening technique and highlight the integration of strong engineering sense with fundamental research to realize industry-scale deployment. This review will inspire the researchers and engineers to break the bottlenecks in electrochemical water softening technology and harness this technology with the broadened industrial application area.

High-Throughput Automatic Laser Printing Strategy toward Cost-effective Portable Integrated Urea Tele-Monitoring System.

A portable sweat urea sensing system is a promising solution to satisfy the booming requirement of kidney function tele-monitoring. However, the complicated manufacturing route and the cumbersome electrochemical testing system still need to be improved to develop the urea point-of-care testing (POCT) and tele-monitoring devices. Here, a universal technical route based on a high-throughput automatic laser printing strategy for fabricating the portable integrated urea monitoring system is proposed. This integrated system includes a high-performance laser-printed urea sensing electrode, a planar three-electrode system, and a self-developed wireless mini-electrochemical workstation. A precursor donor layer is activated by laser scribing and in situ transferred into functional nanoparticles for the drop-on-demand printing of the urea sensing electrode. The obtained electrodes show high sensitivity, low detection limit, fast response time, high selectivity, good average recovery, and long-term stability for urea sensing. Additionally, a laser-induced graphene circuit-based miniature planar three-electrode system and a wireless mini-electrochemical workstation are designed for sensing data collection and transmitting, achieving real-time urea POCT and tele-monitoring. This scalable method provides a universal solution for high-throughput and ultra-fast fabrication of urea-sensing electrodes. The portable integrated urea monitoring system is a competitive option to achieve cost-effective POCT and tele-monitoring for kidney function.

Electrochemical investigation of an anticancer drug 5-Fluorouracil in the presence of Theophylline using low-cost and disposable poly(GLY) modified pencil graphite electrode.

Herein this study, a facile, efficient and disposable electrochemical sensor has been prepared by electropolymerization of glycine (poly(GLY)) on the surface of pencil graphite electrode (PGE). The surface topology of the equipped poly(GLY) modified pencil graphite electrode (poly(GLY)/PGE) and bare pencil graphite electrode (BPGE) has been characterized by the scanning electron microscopy (SEM) combined with energy dispersive x-ray analysis (EDX) and charge transfer behaviour was measured by electron impedance spectroscopy (EIS) method. The voltammetric behaviour of anticancer, 5-fluorouracil (5-FU) in the presence of theophylline (THP) has been carried out in 0.1 M phosphate buffer solution (PBS) of physiological pH 7.0 using different techniques such as cyclic voltammetry (CV), linear sweep voltammetry (LSV) and differential pulse voltammetry (DPV). The proposed poly(GLY)/PGE shows augmented peak current for 5-FU at lower potential side over the BPGE due to the electrocatalytic behaviour of modifier layers wrapped on the electrode surface. The kinetic behaviour of 5-FU at modified electrode surface was studied by varying different parameters such as pH, scan rate and concentration study in 0.1 M PBS used as a supporting electrolyte. The limit of detection (LOD) for 5-FU was attained using DPV method with different concentrations (1.0-13.0 µM) and it was found to be 0.012 µM. The possible electrochemical reaction of 5-FU was proposed and it was incorporated by two electrons and two protons mechanism at modified electrode surface. The voltammetric response of poly(GLY)/PGE towards the determination of 5-FU was unaffected in the presence of some excipients in addition to the remarkable stability and reproducibility. The applicability of the proposed sensor has been performed by real sample investigation of 5-FU with a substantial percentage of recovery results in all optimized conditions.

Low-Cost Plant-Based Metal and Metal Oxide Nanoparticle Synthesis and Their Use in Optical and Electrochemical (Bio)Sensors.

Technological progress has led to the development of analytical tools that promise a huge socio-economic impact on our daily lives and an improved quality of life for all. The use of plant extract synthesized nanoparticles in the development and fabrication of optical or electrochemical (bio)sensors presents major advantages. Besides their low-cost fabrication and scalability, these nanoparticles may have a dual role, serving as a transducer component and as a recognition element, the latter requiring their functionalization with specific components. Different approaches, such as surface modification techniques to facilitate precise biomolecule attachment, thereby augmenting recognition capabilities, or fine tuning functional groups on nanoparticle surfaces are preferred for ensuring stable biomolecule conjugation while preserving bioactivity. Size optimization, maximizing surface area, and tailored nanoparticle shapes increase the potential for robust interactions and enhance the transduction. This article specifically aims to illustrate the adaptability and effectiveness of these biosensing platforms in identifying precise biological targets along with their far-reaching implications across various domains, spanning healthcare diagnostics, environmental monitoring, and diverse bioanalytical fields. By exploring these applications, the article highlights the significance of prioritizing the use of natural resources for nanoparticle synthesis. This emphasis aligns with the worldwide goal of envisioning sustainable and customized biosensing solutions, emphasizing heightened sensitivity and selectivity.

012 facets modulated LDH composite for neurotoxicity risk assessment through direct electrochemical profiling of dopamine.

Rising concerns of pesticide-induced neurotoxicity and neurodegenerative diseases like Parkinson's, Alzheimer's, and Multiple Sclerosis, are exacerbated by overexposure to contaminated waterbodies. Therefore, evaluating the risk accurately requires reliable monitoring of related biomarkers like dopamine (DA) through electrochemical detection. Layered double hydroxides (LDHs) have shown great potential in sensors. However, to meet the challenges of rapid detection of large patient cohorts in real-time biological media, they should be further tailored to display superior analytical readouts. Herein, a ternary LDH (Ni2CoMn0.5) was integrated with the sheets of thermally reduced graphene oxide (trGO), to expose more highly active edge planes of the LDH, as opposed to its generally observed inert basal planes. The improvement in detection performance through such a modulated structure-property is a prospect that hasn't been previously explored for any other LDH-based materials employed in sensing applications. The 2 folds superior electrochemical activity exhibited by the face-on oriented LDH with trGO as compared to the pristine LDH material was further employed for direct detection of DA in real blood plasma samples. Moreover, the designed sensor exhibited exceptional selectivity towards the detection of DA with a limit of detection of 34.6 nM for a wide dynamic range of 0.001-5 mM with exceptional stability retaining 88.56% of the initial current even after storage in ambient conditions for 30 days.

Assessment of photo electro-Fenton and solar photo electro-Fenton processes for the efficient degradation of asulam herbicide.

The degradation of asulam herbicide by photo electro-Fenton (PEF) and solar photo electro-Fenton (SPEF) processes was studied using an undivided electrochemical BDD/carbon-felt cell to generate H2O2 continuously. A central composite design combined with response surface methodology was applied to determine the optimal operating conditions of current intensity = 0.30 A, [Fe2+] = 0.3 mM, and [Na2SO4] = 0.11 M at pH 3 to achieve the complete degradation of asulam by electro-Fenton. Subsequently, the SPEF process was more efficient treatment compared to PEF, achieving a complete degradation of asulam and 98% of mineralization in 180 min. Moreover, 4-aminobenzenesulfonamide, 4-aminophenol, and 4-benzoquinone were detected as aromatic intermediates, whereas acetic acid, oxalic acid, and NO3- ions were identified as final degradation by-products. Thus, the SPEF process is an efficient alternative for the complete degradation and mineralization of herbicide asulam in an aqueous solution under natural sunlight.

Cost-effective protocol to produce 3D-printed electrochemical devices using a 3D pen and lab-made filaments to ciprofloxacin sensing.

A novel conductive filament based on graphite (Gr) dispersed in polylactic acid polymer matrix (PLA) is described to produce 3D-electrochemical devices (Gr/PLA). This conductive filament was used to additively manufacture electrochemical sensors using the 3D pen. Thermogravimetric analysis confirmed that Gr was successfully incorporated into PLA, achieving a composite material (40:60% w/w, Gr and PLA, respectively), while Raman and scanning electron microscopy revealed the presence of defects and a high porosity on the electrode surface, which contributes to improved electrochemical performance. The 3D-printed Gr/PLA electrode provided a more favorable charge transfer (335 Ω) than the conventional glassy carbon (1277 Ω) and 3D-printed Proto-pasta® (3750 Ω) electrodes. As a proof of concept, the ciprofloxacin antibiotic, a species of multiple interest, was selected as a model molecule. Thus, a square wave voltammetry (SWV) method was proposed in the potential range + 0.9 to + 1.3 V (vs Ag|AgCl|KCl(sat)), which provided a wide linear working range (2 to 32 µmol L-1), 1.79 µmol L-1 limit of detection (LOD), suitable precision (RSD < 7.9%), and recovery values from 94 to 109% when applied to pharmaceutical and milk samples. Additionally, the sensor is free from the interference of other antibiotics routinely employed in veterinary practices. This device is disposable, cost-effective, feasibly produced in financially limited laboratories, and consequently promising for evaluation of other antibiotic species in routine applications.

Insight into TEMPO-oxidized cellulose-based composites as electrochemical sensors for dopamine assessment.

The diagnosis and treatment of many neurological and psychiatric problems depend on establishing simple, inexpensive, and comfortable electrochemical sensors for dopamine (DA) detection. Herein, 2,2,6,6 tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOC) were successfully loaded with silver nanoparticles (AgNPs) and/or graphite (Gr) and crosslinked by tannic acid, producing composites. This study describes a suitable casting procedure for the composite synthesis of TOC/AgNPs and/or Gr for the electrochemical detection of dopamine. Electrochemical impedance spectra (EIS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to characterize the TOC/AgNPs/Gr composites. In addition, the direct electrochemistry of electrodes treated with the prepared composites was examined using cyclic voltammetry. The TOC/AgNPs/Gr composite-modified electrode improved electrochemical performance towards detecting dopamine compared to TOC/Gr-modified electrodes. Upon employing amperometric measurement, our electrochemical instrument has a wide linear range (0.005-250 µM), a low limit of detection (0.0005 µM) at S/N = 3, and a high sensitivity (0.963 µA µM-1 cm-2). Additionally, it was demonstrated that DA detection seemed to have outstanding anti-interference characteristics. The proposed electrochemical sensors meet the clinical criteria regarding reproducibility, selectivity, stability, and recovery. The straightforward electrochemical method utilized in this paper may provide a potential framework for creating dopamine quantification biosensors.

Low-cost goldleaf electrode as a platform for Escherichia coli immunodetection.

Gold electrodes are one of most prevalent substrates in electrochemical biosensors because they can be easily and highly efficiently functionalized with thiolated biomolecules. However, conventional methods to fabricate gold electrodes are costly, time-consuming and require onerous equipment. Here, an affordable method for rapid fabrication of an electrochemical immunosensor for Escherichia coli detection is presented. The gold electrode was generated using 24-karat gold leaves and lowcost polyvinyl chloride adhesive sheets covered with an insulating PTFE layer. The goldleaf electrode (GLE) was patterned using laser ablation and characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electronic microscopy, contact angle and 3D profiling. The GLEs were modified by a self-assembled mercaptopropionic monolayer, followed by surface activation to allow binding of the specific anti-E. coli antibody via carbodiimide linking. The biosensor showed a detection limit of 2 CFU/mL and a linear dynamic range of 10-107 CFU/mL for E. coli cells. No false positive signals were obtained from control bacteria. The obtained results demonstrated suitability of GLE for use in biosensors with high reliability and reproducibility. It is foreseeable that our work will inspire design of point-of-need biosensors broadly applicable in low-resource settings.

A novel, extreme low-cost poly (Erythrosine) modified pencil graphite electrode for determination of Adrenaline.

A simple, novel, and less cost yellow (Erythrosine) modified pencil graphite electrode (Po-ERY/MGPE) was successfully fabricated via electropolymerization method using cyclic voltammetric techniques. The fabricated Po-ERY/MGPE opted as a sensor for the detection of Adrenaline (ADR) in 0.2 M PBS (7.4 pH). This reported senor displayed excellent electrocatalytic activity, increased sensitivity, high stability, superior electron transfer kinetics in the oxidation of ADR once relative to BGPE. The significance of pH, scan rate, and impact of concentration was assessed at the sensor. As per the pH and scan rate study, redox routes carry the same number of electrons and protons, and electro-oxidation of ADR was adsorption controlled respectively. The LOD of ADR was found to be 0.499 µM. The DPV data indicate that there is a significant peak divergence among ADR and uric acid (UA) which could make it easier to determine them alone and simultaneously on the sensor. The described method has been employed for the determination of ADR in injection sample. Good recovery values indicate the efficacy and applicability of the sensor in detecting ADR.

A Low-Cost Electrochemical Method for the Determination of Sulfadiazine in Aquaculture Wastewater.

As the concept of green development spreads worldwide, environmental protection awareness for production and life has been continuously strengthened. Antibiotic residues in aquaculture wastewaters aggravate environmental pollution and threaten human health. Therefore, the detection of residual antibiotics in wastewater is crucial. In this paper, a new, simple, and low-cost method based on the glassy carbon electrode electrochemical sensor for the detection of sulfadiazine in aquaculture wastewater was developed without using complex materials to modify the electrode surface, to detect sulfadiazine which electrochemically oxidizes directly. The electrochemical performance of the sensor was studied and optimized with differential pulse voltammetry and cyclic voltammetry in the three-electrode system. The optimal electrolyte was acetic acid-sodium acetate buffer, and the optimal pH was 4.0. Finally, based on the optimized conditions, the newly established method showed satisfactory results for detecting sulfadiazine in aquaculture wastewater. The concentration of sulfadiazine and the peak current intensity showed a linear relationship in the range of 20 to 300 µmol/L, and the limit of detection was 6.14 µmol/L, the recovery rate of standard addition was 87-95%, with satisfactory reproducibility and low interference.

Ultrasensitive and Cost-Effective Detection of Neuropeptide-Y by a Disposable Immunosensor: A New Functionalization Route for Indium-Tin Oxide Surface.

Neuropeptide Y (NPY) is one of the most abundant neuropeptides in the human brain, and its levels in the blood change in neurodegenerative and neuroimmune disorders. This indicates that NPY may serve as a diagnostic and monitoring marker for associated disorders. In this paper, an electrochemical immunosensor was created to detect NPY biomarkers using a novel immobilization technique. The proposed biosensor system enables accurate, specific, cost-effective, and practical biomarker analysis. Indium tin oxide-coated polyethylene terephthalate (ITO-PET) sheets were treated with hexamethylene diisocyanate (HMDC) to covalently immobilize antibodies. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques were used to analyze each step of the biosensors. The proposed NPY biosensor has a broad linear detection range (0.01-100 pg mL-1), a low limit of detection (LOD) (0.02968 pg mL-1), and a low limit of quantification (LOQ) (0.0989 pg mL-1). Atomic force microscopy (AFM) was used to support in the optimization process, study the surface morphology, and visualize it. Studies of repeatability, reproducibility, storage, and Kramers-Kronig transformation were conducted during electrochemical characterization. After analytical experiments, the biosensor's responses to human serum samples were evaluated. According to the obtained data, the error margin is small, and the created biosensor offers a great deal of promise for the clinical measurement of NPY.