Three-dimensional assessment of virtual clear aligner attachment removal: A prospective clinical study.

INTRODUCTION: In digital dentistry, virtual attachment removal (VAR) optimizes clear aligner therapy by enhancing efficiency for refinements and enabling prefabricated retainer production through the removal of attachments from a digital scan before the clinical removal of clear aligner attachments. This prospective clinical study aimed to evaluate the accuracy of VAR in the maxillary arch. METHODS: A total of 110 teeth were analyzed from a sample of 54 maxillary scans from 25 subjects. Models with attachments were virtually debonded using Meshmixer (Autodesk, San Rafael, Calif) and superimposed over the control group in MeshLab. Vector Analysis Module (Canfield Scientific, Fairfield, NJ) was used to calculate and analyze 3-dimensional Euclidean distances on the buccal surfaces between the superimposed models. Statistical analysis was performed using SPSS (version 23.0, IBM, Armonk, NY). The Shapiro-Wilkes (α = 0.05) test determined a nonnormal distribution of results. The Kruskal-Wallis (α = 0.05) was used to determine differences between different tooth types and the number of attachments. RESULTS: The VAR protocol showed no statistical differences in the root mean square between different tooth segments with an overall tendency for inadequate attachment removal. No difference between the groups was found regarding the number of attachments when used as a main factor. CONCLUSIONS: The VAR technique is precise enough for the fabrication of retainers from printed dental models in a clinical setting and is not affected by the number of attachments on the tooth.

Three-dimensional assessment of periodontal support of lower incisors for skeletal Class II malocclusion undergoing presurgical orthodontic treatment with different vertical skeletal patterns.

BACKGROUND: The aim of the present study was to compare periodontal support changes during retraction of mandibular anterior teeth for skeletal Class II malocclusion with different facial divergence and to analyze relevant factors influencing bone remodeling by applying three-dimensional (3D) cone-beam computed tomography (CBCT) reconstruction technology. METHODS: Forty-eight patients with Class II malocclusion requiring surgical orthodontic treatment enrolled in the study were divided into the hyperdivergent group (n = 16), normodivergent group (n = 16) and hypodivergent group (n = 16) according to their vertical skeletal patterns. Cone-beam computed tomography (CBCT) scans were obtained before treatment (T1) and after presurgical orthodontic treatment (T2). The two-dimensional (2D) alveolar bone morphology, movement of mandibular central incisors and volume of the alveolar bone around incisors were measured on the labial and lingual sides by 3D CBCT reconstruction technology. Statistical analyses were performed with one-way ANOVA, paired t tests and multiple linear regression. RESULTS: During presurgical orthodontic treatment, the alveolar bone height on the labial side of the hyperdivergent group decreased significantly (P ≤ 0.05), but was maintained in the normodivergent and hypodivergent groups (P > 0.05). However, the alveolar bone volume, alveolar bone thickness at each level and alveolar bone height on the lingual side decreased significantly for all the groups. Apart from the initial morphometric measurements at T1, the morphology of lingual alveolar bone at T2 was significantly influenced by the direction and amount of tooth movement. Horizontal retraction and vertical protrusion of the root apex were negatively related to the alveolar bone on the lingual side after presurgical orthodontic treatment. CONCLUSION: For Class II malocclusion patients undergoing presurgical orthodontic treatment, the changes in the periodontal support of the lower central incisors varied in different vertical skeletal patterns. There exists a great periodontal risk of alveolar bone resorption on the lingual side for various vertical types. To avoid alveolar bone deterioration, it is essential to investigate the bone remodeling of patients with different alveolar bone conditions and cautiously plan tooth movement prior to orthodontic treatment. Moreover, 3D measurements based on CBCT construction can provide complementary information to traditional 2D measurements.

Assessment of the Maximum Amount of Orthodontic Force for Dental Pulp and Apical Neuro-Vascular Bundle in Intact and Reduced Periodontium on Bicuspids (Part II).

This study examines 0.6 N-4.8 N as the maximum orthodontic force to be applied to dental pulp and apical NVB on intact and 1-8 mm reduced periodontal-ligament (PDL), in connection with movement and ischemic, necrotic and resorptive risk. In addition, it examines whether the Tresca finite-element-analysis (FEA) criterion is more adequate for the examination of dental pulp and its apical NVB. Eighty-one (nine patients, with nine models for each patient) anatomically correct models of the periodontium, with the second lower-premolar reconstructed with its apical NVB and dental pulp were assembled, based on X-ray CBCT (cone-beam-computed-tomography) examinations and subjected to 0.6 N, 1.2 N, 2.4 N and 4.8 N of intrusion, extrusion, translation, rotation, and tipping. The Tresca failure criterion was applied, and the shear stress was assessed. Forces of 0.6 N, 1.2 N, and 2.4 N had negligible effects on apical NVB and dental pulp up to 8 mm of periodontal breakdown. A force of 4.8 N was safely applied to apical NVB on the intact periodontium only. Rotation and tipping seemed to be the most invasive movements for the apical NVB. For the dental pulp, only the translation and rotation movements seemed to display a particular risk of ischemia, necrosis, and internal orthodontic-resorption for both coronal (0-8 mm of loss) and radicular pulp (4-8 mm of loss), despite the amount of stress being lower than the MHP. The Tresca failure criterion seems more suitable than other criteria for apical NVB and dental pulp.

Three-dimensional digital assessment of typodont activations.

OBJECTIVES: Wax typodonts are widely used as pre-clinical teaching tools to test and research the complex force systems created by archwire activations, however, a limitation is the inability to quantify the resultant statically indeterminate tooth movements. The aim of this study was to develop an analogue-to-digital typodont system to quantify the effects of archwire activations on individual typodont teeth in three dimensions. METHODS: The typodont system was developed using CAD/CAM technology. Posterior expansion, squared, tapered, asymmetrical arch forms and reversed curve of Spee activations were tested with three repeats. The resulting three-dimensional movements of individual typodont teeth were assessed with six degrees of freedom (df). Cartesian coordinate systems were set for each tooth. Mesio-distal, bucco-lingual and intrusive-extrusive movements were assessed as changes in the location of the geometrically estimated centre of resistance in the x, y and z axes, respectively. Torque, tip and rotation movements were assessed as the rotations around the mesio-distal, bucco-lingual and intrusive-extrusive axes, respectively. RESULTS: Individual typodont tooth displacements from each activation could reliably be described with six df. The transversal-to-sagittal movement ratio ranged from 2:1 to 7:1, depending on the activation. Asymmetrical arch form activations caused a midline shift and affected the lateral overjet. Reversing the curve of Spee led to intrusion of incisors and second molars, extrusion of premolars and first molars and pronounced first and third order effects. CONCLUSION: The digital typodont system is a promising teaching tool. The tested activations have implications in three dimensions, which should be considered when planning tooth movements.

Assessment of the Best FEA Failure Criteria (Part II): Investigation of the Biomechanical Behavior of Dental Pulp and Apical-Neuro-Vascular Bundle in Intact and Reduced Periodontium.

The aim of this study was to biomechanically assess the behavior of apical neuro-vascular bundles (NVB) and dental pulp employing Tresca, Von Mises, Pressure, S1 and S3 failure criterions in a gradual periodontal breakdown under orthodontic movements. Additionally, it was to assess the accuracy of failure criteria, correlation with the maximum hydrostatic pressure (MHP), and the amount of force safe for reduced periodontium. Based on cone-beam computed tomography, 81 3D models of the second lower premolar were subjected to 0.5 N of intrusion, extrusion, rotation, tipping, and translation. A Finite Elements Analysis (FEA) was performed. In intact and reduced periodontium apical NVB, stress (predominant in all criteria) was significantly higher than dental pulp stress, but lower than MHP. VM and Tresca displayed identical results, with added pulpal stress in translation and rotation. S1, S3 and Pressure showed stress in the apical NVB area. 0.5 N seems safe up to 8 mm periodontal breakdown. A clear difference between failure criteria for dental pulp and apical NVB cannot be proved based only on the correlation quantitative results-MHP. Tresca and VM (adequate for ductile materials) showed equivalent results with the lowest amounts of stress. The employed failure criteria must be selected based on the type of material to be analyzed.

Assessment of the Best FEA Failure Criteria (Part I): Investigation of the Biomechanical Behavior of PDL in Intact and Reduced Periodontium.

The accuracy of five failure criterions employed in the study of periodontal ligaments (PDL) during periodontal breakdown under orthodontic movements was assessed. Based on cone-beam computed tomography (CBCT) examinations, nine 3D models of the second lower premolar with intact periodontium were created and individually subjected to various levels of horizontal bone loss. 0.5 N of intrusion, extrusion, rotation, tipping, and translation was applied. A finite Elements Analysis (FEA) was performed, and stresses were quantitatively and qualitatively analyzed. In intact periodontium, Tresca and Von Mises (VM) stresses were lower than maximum physiological hydrostatic pressure (MHP), while maximum principal stress S1, minimum principal stress S3, and pressure were higher. In reduced periodontium, Tresca and VM stresses were lower than MHP for intrusion, extrusion, and the apical third of the periodontal ligament for the other movements. 0.5 N of rotation, translation and tipping induced cervical third stress exceeding MHP. Only Tresca (quantitatively more accurate) and VM are adequate for the study of PDL (resemblance to ductile), being qualitatively similar. A 0.5 N force seems safe in the intact periodontium, and for intrusion and extrusion up to 8 mm bone loss. The amount of force should be reduced to 0.1-0.2 N for rotation, 0.15-0.3 N for translation and 0.2-0.4 N for tipping in 4-8 mm periodontal breakdown. S1, S3, and pressure criteria provided only qualitative results.

A comparative assessment of the dentoskeletal effects of clear aligners vs miniplate-supported posterior intrusion with fixed appliances in adult patients with anterior open bite. A multicenter, retrospective cohort study.

INTRODUCTION: This study aimed to retrospectively evaluate the dentoskeletal effects of clear aligners (Invisalign) vs miniplate-supported posterior intrusion (MSPI) and identify factors associated with posttreatment overbite in adults with anterior open bite. METHODS: Twenty-nine patients treated with Invisalign and 24 with MSPI combined with full-fixed orthodontic appliances were included from 5 orthodontic practices. Pretreatment and posttreatment lateral cephalometric measurements were included as outcomes. Comparisons across groups and identification of final overbite predictors were assessed with regression modeling and machine learning techniques. RESULTS: MSPI induced significantly greater maxillary molar intrusion (1.5 mm; 95% confidence interval [CI], 0.83-2.17; P <0.001), with subsequent reduction of anterior face height (ANS-Me) (-2.77 mm; 95% CI, -3.64 to -1.91; P <0.001), Mp-SN° (-1.95°; 95% CI, -2.77 to -1.12; P <0.001), and ANB° (-1.69°; 95% CI, -2.44 to -0.94; P <0.001) compared with Invisalign. MSPI resulted in a significantly larger increase in SNB° (0.94°; 95% CI, 0.23-1.65; P = 0.01) and point-Pog projection (2.45 mm; 95% CI, 1.12-3.77; P = 0.001). Compared with MSPI, Invisalign had a significantly greater increase in the distance of maxillary (1.05 mm; 95% CI, 0.38-1.72; P = 0.003) and mandibular (0.9 mm; 95% CI, 0.19-1.60; P = 0.01) incisal edges relative to their apical bases, with borderline greater lingual tipping of only the maxillary incisors (2.82°; 95% CI, -0.44 to 6.09; P = 0.09). Appliance type and initial overbite were significant final overbite predictors across all models. However, this difference was only evident in male patients (males [1.65; 95% CI, 0.99-2.32; P <0.001]; female [-0.04; 95% CI, -0.52 to 0.44; P = 0.87]). CONCLUSIONS: Both appliances effectively improve overbite. MSPI applied the correction via molar intrusion and counterclockwise mandibular autorotation, whereas Invisalign via maxillary and mandibular incisor extrusion.

Standardized assessment of bone micromorphometry around teeth following orthodontic tooth movement : A µCT split-mouth study in mice.

PURPOSE: Volumetric quantitative analyses of bone micromorphometry changes following orthodontic tooth movements are hardly standardizable. The present study aimed at validating and applying a novel microcomputed tomography (CT)-based approach that enables the segmentation of teeth and definition of a standardized volume of interest (VOI) around the roots to assess local bone micromorphometry. METHODS: The jaws of 3 untreated and 14 orthodontically treated mice (protraction of the upper right molar for 11 days with 0.5 N; untreated left upper molar) were scanned with a micro-CT. The first molars and the alveolar bone were segmented, and a standardized VOI was defined around the teeth. The bone volume per total volume (BV/TV) was assessed within the VOI, and BV/TV values were compared between contralateral sites in both untreated (method validation) and treated animals (method application). RESULTS: The intraclass correlation coefficient of 0.99 revealed high reliability of the method. In the untreated animals, Bland-Altman analysis confirmed comparable BV/TV fractions (mean difference: -1.93, critical difference: 1.91, Wilcoxon: p = 0.03). In the orthodontically treated animals, BV/TV values were significantly lower at the test compared to the control site (test: 33.23% ± 5.74%, control: 41.33% ± 4.91%, Wilcoxon: p < 0.001). CONCLUSION: Within the limits of the study, the novel approach demonstrated the applicability to evaluate bone micromorphometry around teeth subjected to orthodontic treatment.

Radiographic and histochemical assessment of root resorption during canine retraction through piezocision site.

Introduction: The number of adult patients seeking orthodontics treatment has increased drastically. There is increased need for faster tooth movement and good esthetics. Piezocision is one of the methods used for accelerating the rate of tooth movement. Aims and Objectives: To assess the amount of root resorption after retraction of canine through piezocision site and compare it with that of recently extracted site using cone-beam computed tomography (CBCT) and assessment of dentin sialoprotein (DSP) levels in gingival crevicular fluid (GCF). Materials and Methods: A split mouth design was used in 15 patients who were undergoing first orthodontic treatment with premolar extractions. Randomly one of the sides was chosen as control (Group I) and the other side underwent piezocision procedure (Group II). 0.022 × 0.028'' MBT system was used with 0.017 × 0.025 SS wire for canine retraction using 150 grams of force. GCF samples were collected from mesio-buccal and disto-buccal of the canine with micropipette at baseline (TO) and day 90(T1) to detect the levels of DSP and the root resorption was measured using CBCT. Results: Statistically significant amount of root resorption was observed after retraction in both the groups. DSP levels were increased in both the groups, though little higher in Group II when compared to group I. Conclusion: DSP level was increased on the piezocision side but it was statistically insignificant which suggests the amount of root resorption on both the sides is similar.

Comparative assessment of the rate of orthodontic tooth movement in adolescent patients undergoing treatment by first bicuspid extraction and en mass retraction, associated with low-frequency mechanical vibrations in passive self-ligating and conventional brackets: A randomized controlled trial.

BACKGROUND: Low-frequency vibrations are one of the many non-surgical modalities aimed at increasing the rate of orthodontic tooth movement. OBJECTIVE: The present trial was conducted to assess the efficacy of low-frequency vibrations in increasing the rate of orthodontic tooth movement in adolescent patients undergoing fixed mechanotherapy with passive self-ligating brackets and conventional brackets. MATERIALS AND METHODS: Setting and sample population: department of orthodontics and dentofacial orthopaedics in a nationally accredited dental college. Participants, study design and methods: 65 patients were randomly allocated to three groups. Two experimental groups consisted of passive self-ligating and conventionally ligated appliances received low-frequency vibrations. The control group did not receive any vibrations. Allocation ratio was 1:1:1.32. Eligibility criteria: adolescent patients with sound and healthy dentition, incisor irregularity<5mm. PRIMARY OUTCOME: rate of orthodontic tooth movement in mm/month. Randomization and blinding: computer-generated random allocation sequencing was done and data assessor was blinded. STATISTICS: the Q-Q plot and Shapiro-Wilks test judged the normality of the data. The parametric test included ANCOVA and post-hoc analysis. RESULTS: No statistically significant enhancement of tooth movement was seen in the experimental groups, when comparison was done with the control group P>0.05. Comparison between the two experimental groups did not reveal any significant difference either. CONCLUSION: No statistically significant increase of orthodontic tooth movement was seen with low-frequency vibrations and the mode of ligation did not have any effect in increasing the rate of tooth movement either.

Comparative assessment of mouse models for experimental orthodontic tooth movement.

Animal experiments are essential for the elucidation of biological-cellular mechanisms in the context of orthodontic tooth movement (OTM). So far, however, no studies comparatively assess available mouse models regarding their suitability. OTM of first upper molars was induced in C57BL/6 mice either via an elastic band or a NiTi coil spring for three, seven or 12 days. We assessed appliance survival rate, OTM and periodontal bone loss (µCT), root resorptions, osteoclastogenesis (TRAP+ area) and local expression of OTM-related genes (RT-qPCR). Seven days after the elastic bands were inserted, 87% were still in situ, but only 27% after 12 days. Survival rate for the NiTi coil springs was 100% throughout, but 8.9% of the animals did not survive. Both methods induced significant OTM, which was highest after 12 (NiTi spring) and 7 days (band), with a corresponding increase in local gene expression of OTM-related genes and osteoclastogenesis. Periodontal bone loss and root resorptions were not induced at a relevant extent by neither of the two procedures within the experimental periods. To induce reliable OTM in mice beyond 7 days, a NiTi coil spring is the method of choice. The elastic band method is recommended only for short-term yes/no-questions regarding OTM.

A cost-effectiveness analysis of anchorage reinforcement with miniscrews and molar blocks in adolescents: a randomized controlled trial.

OBJECTIVE: To analyse cost-effectiveness of anchorage reinforcement with buccal miniscrews and with molar blocks. We hypothesized that anchorage with miniscrews is more cost-effective than anchorage with molar blocks. TRIAL DESIGN: A single-centre, two-arm parallel-group randomized controlled trial. METHODS: Adolescents (age 11-19 years) in need of treatment with fixed appliance, premolar extractions, and en masse retraction were recruited from one Public Dental Health specialist centre. The intervention arm received anchorage reinforcement with buccal miniscrews during space closure. The active comparator received anchorage reinforcement with molar blocks during levelling/alignment and space closure. The primary outcome measure was societal costs defined as the sum of direct and indirect costs. Randomization was conducted as simple randomization stratified on gender. The patients, caregivers, and outcome assessors were not blinded. RESULTS: Eighty patients were randomized into two groups. The trial is completed. All patients were included in the intention-to-treat analysis. The median societal costs for the miniscrew group were €4681 and for the molar block group were €3609. The median of the difference was €825 (95% confidence interval (CI) 431-1267). This difference was mainly caused by significantly higher direct costs consisting of material and chair time costs. Differences in chair time costs were related to longer treatment duration. No serious harms were detected, one screw fractured during insertion and three screws were lost during treatment. GENERALIZABILITY AND LIMITATIONS: The monetary variables are calculated based on a number of local factors and assumptions and cannot necessarily be transferred to other countries. Variables such as chair time, number of appointments, and treatment duration are generalizable. Owing to the study protocol, the benefit of miniscrews as a stable anchorage has not been fully utilized. CONCLUSIONS: When only moderate anchorage reinforcement is needed, miniscrews are less cost-effective than molar blocks. The initial hypothesis was rejected. Miniscrews provide better anchorage reinforcement at a higher price. They should be used in cases where anchorage loss cannot be accepted. TRIAL REGISTRATION: NCT02644811.

Three-dimensional assessment of external apical root resorption after maxillary posterior teeth intrusion with miniscrews in anterior open bite patients

ABSTRACT Objective: The objective of this study was to assess the external apical root resorption (EARR) of the maxillary posterior teeth after intrusion with miniscrews. Methods: Fifteen patients (13 females and 2 males) with age ranging from 14.5 to 22 years (mean 18.1 ±2.03 years) were selected to participate in this study. All patients presented with anterior open bite of 3 mm or more. An intrusion force of 300 g was applied on each side to intrude the maxillary posterior teeth. Cone beam computed tomography (CBCT) scans were taken pretreatment and post-intrusion and were analyzed to evaluate the EARR. Results: The maxillary posterior teeth were intruded in average 2.79 ± 0.46 mm (p< 0.001) in 5.1 ± 1.3 months, and all examined roots showed statistically significant EARR (p< 0.05) with an average of 0.55 mm, except the distobuccal root of the left first permanent molars and both the palatal and buccal roots of left first premolars, which showed no statistically significant changes. Conclusions: The evaluated teeth presented statistically significant EARR, but clinically, due to the small magnitude, it was not considered significant. Moreover, the CBCT provided a good visualization of all roots in all three planes, and it was effective in detecting minimal degrees of EARR.

RESUMO Objetivo: o objetivo desse estudo foi verificar a existência de reabsorção radicular apical externa (RRAE) em dentes posterossuperiores após intrusão ancorada em mini-implantes. Métodos: quinze pacientes (13 mulheres e 2 homens) com a idade variando entre 14,5 e 22 anos (média de 18,1 ± 2,03 anos) foram selecionados para participar desse estudo. Todos os pacientes possuíam mordida aberta anterior de 3mm ou mais. Uma força de 300 gramas foi aplicada em cada lado para intruir os dentes posterossuperiores. Tomografias computadorizadas de feixe cônico (TCFC), adquiridas antes do tratamento e após a intrusão, foram comparadas para se avaliar a RRAE. Resultados: os dentes posterossuperiores foram intruídos em média 2,70 ± 0,46 mm (p< 0,001) em 5,1 ± 1,3 meses, e todas as raízes examinadas mostraram RRAE estatisticamente significativa (p< 0,05), com média de 0,55 mm, exceto pela raiz distovestibular dos primeiros molares permanentes esquerdos, e pelas raízes palatina e vestibular dos primeiros pré-molares esquerdos, que não apresentaram mudanças estatisticamente significativas. Conclusões: os dentes avaliados apresentaram RRAE estatisticamente significativa, a qual, porém, não foi considerada clinicamente significativa, devido à sua reduzida magnitude. Além disso, a TCFC possibilitou uma boa visualização de todas as raízes nos três planos espaciais, e foi eficaz para detecção de níveis mínimos de RRAE.

Three-dimensional assessment of the effect of micro-osteoperforations on the rate of tooth movement during canine retraction in adults with Class II malocclusion: A randomized controlled clinical trial.

INTRODUCTION: The purpose of this split-mouth trial was to investigate the effect of micro-osteoperforations (MOPs) on the rate of tooth movement. METHODS: Thirty-two patients (24 female, 8 male; mean age, 19.26 ± 2.48 years) who required fixed orthodontic treatment and maxillary first premolar extractions participated in this trial with MOPs randomly allocated to either the right or left sides distal to the maxillary canines. Eligibility criteria included Class II Division 1 malocclusion, healthy periodontal condition, no smoking, and no systemic disease. Miniscrews were used to support anchorage and retract the canines with the aid of closed-coil nickel-titanium springs with 150 g of force. Randomization was accomplished with block randomization with a permuted block size of 2 with a 1:1 allocation ratio to either right or left with allocations concealed in opaque, sealed envelopes. Blinding was used at the data collection and analysis stages. Three MOPs were performed using miniscrews (5 mm depth, 1.5 mm width) on the buccal bone distal to the canines on the randomly selected side. The primary outcome was the rate of canine retraction measured from 3-dimensional digital models superimposed at the rugae area from the baseline to the first, second, and third months. The following secondary outcomes were examined: anchorage loss, canine tipping, canine rotation, root resorption, plaque index, and gingival index. Pain level, pain interference with the patients' daily life, patients' satisfaction with the procedure and degree of ease, willingness to repeat the procedure, and recommendation to others were also evaluated. RESULTS: There was no statistically significant difference in the rates of tooth movement between the MOP and the control sides at all time points (first month: P = 0.77; mean difference, 0.2 mm; 95% CI, -0.13, 0.18 mm; second month: P = 0.50; mean difference, -0.08 mm; 95% CI, -0.33, 0.16 mm; third month: P = 0.76; mean difference, -0.05 mm; 95% CI, -0.40, 0.29 mm). There were also no differences in anchorage loss, rotation, tipping, root resorption, plaque index, periodontal index, and pain perception between the MOP and control sides at any time point (P >0.05). MOPs had no effect on the patients' daily life except for a feeling of swelling on the first day (P = 0.05). Level of satisfaction and degree of easiness of the procedure were high. A significant percentage of patients were willing to repeat the procedure and recommend it to others. No serious harm was observed. CONCLUSIONS: Three MOPs were not effective in accelerating tooth movement at any time point. Other secondary parameters evaluated were not different between the MOP and control sides except for the feeling of swelling on day 1 on the MOP side. Patients were highly satisfied with the MOP procedure, and many considered MOPs an easy procedure and were willing to repeat and recommend it to friends. REGISTRATION: This trial was registered at Clinicaltrials.gov with identifier number NCT02473471. PROTOCOL: The protocol was not published before trial commencement. FUNDING: This work was supported by Jordanian University of Science and Technology (grant number 20150263). No conflict of interest is declared.

Three-dimensional assessment of external apical root resorption after maxillary posterior teeth intrusion with miniscrews in anterior open bite patients.

OBJECTIVE: The objective of this study was to assess the external apical root resorption (EARR) of the maxillary posterior teeth after intrusion with miniscrews. METHODS: Fifteen patients (13 females and 2 males) with age ranging from 14.5 to 22 years (mean 18.1 ±2.03 years) were selected to participate in this study. All patients presented with anterior open bite of 3 mm or more. An intrusion force of 300 g was applied on each side to intrude the maxillary posterior teeth. Cone beam computed tomography (CBCT) scans were taken pretreatment and post-intrusion and were analyzed to evaluate the EARR. RESULTS: The maxillary posterior teeth were intruded in average 2.79 ± 0.46 mm (p< 0.001) in 5.1 ± 1.3 months, and all examined roots showed statistically significant EARR (p< 0.05) with an average of 0.55 mm, except the distobuccal root of the left first permanent molars and both the palatal and buccal roots of left first premolars, which showed no statistically significant changes. CONCLUSIONS: The evaluated teeth presented statistically significant EARR, but clinically, due to the small magnitude, it was not considered significant. Moreover, the CBCT provided a good visualization of all roots in all three planes, and it was effective in detecting minimal degrees of EARR.

[Construction and assessment of a three-dimensional finite element model of mandibualr second molar mesialization using customized lingual appliance and mini-implant].

Objective: To construct a three-dimensional (3D) finite element model and analyze the biomechanical characteristics during mandibular second molar mesialization using customized lingual appliances and mini-implant. Methods: One adult student volunteer from The First Affiliated Hospital of Zhengzhou University with lower left first molar extraction was selected. After CT scanning, Mimics, Geomagic, ANSYS were employed to develop a 3D finite element model including customized lingual brackets, stainless steel lingual arch wire, buccal buckles, lower dentition, periodontal ligaments and alveolar bone. Four different loading methods (1. the force of 1.470 N loaded at the lingual side only; 2, 3, 4. the forces of 0.490, 0.735 and 0.980 N loaded at both buccal and lingual sides, respectively.) were included. The initial displacements of the lower second molar and stress distribution in the periodontal ligaments were analyzed. Results: More uniform stress distributions in the periodontal membrane of mandibular left second molar were found when the mesial force were loaded at both buccal and lingual sides than the force loaded at lingual side only. More inclination of the second molar was observed when force loaded at both sides than at lingual side only. With the values of the force increased, the mesial inclination potential of the second molar, the initial movement of the second molar and the stress distribution in the periodontal membrane increased. Under the force of 0.735 N at both buccal and lingual sides, mesially inclined initial displacements of the mandibuar second molar were observed and the stress values of von Mises was in the suitable area. Conclusions: Less second molar rotation was found when the force loaded at both buccal and lingual sides than loaded at lingual side only. However, force loaded at both sides would increase the measial inclination potential of the second molar.

Cone-Beam Computed Tomography and Interdisciplinary Dentofacial Therapy: An American Academy of Periodontology Best Evidence Review Focusing on Risk Assessment of the Dentoalveolar Bone Changes Influenced by Tooth Movement.

BACKGROUND: The aim of this systematic review is to evaluate whether cone-beam computed tomography (CBCT) imaging can be used to assess dentoalveolar anatomy critical to the periodontist when determining risk assessment for patients undergoing orthodontic therapy using fixed or removable appliances. METHODS: Both observational and interventional trials reporting on the use of CBCT imaging assessing the impact of orthodontic/dentofacial orthopedic treatment on periodontal tissues (i.e., alveolar bone) were included. Changes in the alveolar bone thickness and height around natural teeth as well as treatment costs were evaluated. MEDLINE (via PubMed) and EMBASE databases were searched for articles published in the English language, up to and including July 2016, and extracted data were organized into evidence tables. RESULTS: Thirteen studies were included in this systematic review describing the positive or deleterious changes on the alveolar bone surrounding natural teeth undergoing orthodontic tooth movement or influenced by orthopedic forces through fixed appliances. Clinical recommendation summaries presenting the strengths and weaknesses of the evidence in terms of benefits and harms were generated. CONCLUSIONS: CBCT imaging can improve the periodontal diagnostic acumen regarding alveolar bone alterations influenced by orthodontic tooth movement and can help determine risk assessment prior to such intervention. Clinicians are also better informed to determine risk assessment and develop preventative or plan interceptive periodontal augmentation (soft tissue and/or bone augmentation) therapies for patients undergoing orthodontic tooth movement. These considerations are recognized as being especially critical for treatment approaches in patients where buccal tooth movement (expansion) is planned in the anterior mandible or involving the maxillary premolars.

Periodontal surgery of the maxillary impacted canine for orthodontic purposes: Proposal for a surgical decision tree.

In a private practice, between January 2010 and December 2015, 621 impacted teeth were exposed for orthodontic purposes. The majority were maxillary canines (464=74.71%), followed by maxillary central incisors (36=5.80%), mandibular canines (32=5.15%) and, finally, second premolars (30=4.83%). The 464 maxillary canines were present in 356 patients with a mean age, at the time of the intervention, of 15 years and 3 months (7 years and 10 months to 45 years and one month). The gender distribution was 60.7% (F) to 39.3% (M); 32.8% of maxillary canines were buccal and 67.2% were palatal. Only 6 canines did not move, with a success rate of 98.7%. At the pretreatment interview, the orthodontists explained that orthodontic-surgical placement of an impacted canine lengthened treatment time by an average 6 months, but in some cases by 12 months or more. The purpose of this surgery is to help the orthodontist to position the impacted tooth in the dental arch with all the periodontal structures and with the best possible integration esthetics. The objective of this article is to illustrate the periodontal orthodontic surgery of the maxillary canine and to propose a surgical decision tree.

Assessment of the changes in arch perimeter and irregularity in the mandibular arch during initial alignment with the AcceleDent Aura appliance vs no appliance in adolescents: A single-blind randomized clinical trial.

INTRODUCTION: The purpose of this 2-arm parallel trial was to assess the effects of the AcceleDent Aura (OrthoAccel Technologies, Houston, Tex) appliance on the increase in mandibular anterior arch perimeter, the reduction in mandibular arch irregularity, and the amount of discomfort during initial alignment of the mandibular arch with fixed appliances. METHODS: Forty Class II adolescent patients with full fixed appliances and treated with maxillary premolar extractions and no extractions in the mandibular arch participated in this randomized clinical trial. They were recruited in a private practice and treated by 1 clinician. Randomization to either a no-appliance group or the AcceleDent Aura appliance group was accomplished with permuted blocks of 10 patients with the allocations concealed in opaque, sealed envelopes. Both the operator and the outcome assessor were blinded, but it was not feasible to blind the patients. Discomfort was recorded during the first week of treatment. Mandibular anterior arch perimeter and anterior irregularity were measured from plaster models taken at the start of treatment and after 5, 8, and 10 weeks. RESULTS: No patients were lost to follow-up, and no data were missing. There was no difference in anterior arch perimeter at the start of treatment (P = 0.85; median, 0.6 mm; 95% confidence interval [CI], -1.6, +1.8 mm) or at any other time point (5 weeks: P = 0.84; median, -0.2 mm; 95% CI, -1.6, +1.2 mm; 8 weeks: P = 0.56; median, -0.3 mm; 95% CI, -1.6, +0.7 mm; 10 weeks: P = 0.67; median, -0.1 mm; 95% CI, -1.5, +1.1 mm). There was also no difference between groups for incisor irregularity (P = 0.46; median, -0.5 mm; 95% CI, -2.2, +2.8 mm; P = 0.80; median, 0.0 mm; 95% CI, -1.0, +1.1 mm; P = 0.70; median, 0.1 mm; 95% CI, -0.7, +0.8 mm; P = 0.65; median, 0.2 mm; 95% CI, -0.6, +0.6 mm). No difference was detected at any time during the first week for discomfort (baseline: P = 0.84; median, -1.5 mm; 95% CI, -15.9, +9.8 mm; 6 hours: P = 0.96; median, 0.3 mm; 95% CI, -23.5, +21.8 mm; 1 day: P, 0.75; median, -3.5 mm; 95% CI, -27.1, +26.9 mm; 3 days: P = 0.98; median, -0.6 mm; 95% CI, -20.6, +20.0; 7 days: P = 0.57; median, 0.5 mm; 95% CI, -5.0, +5.3 mm). However, significantly fewer participants in the AcceleDent Aura group used analgesics at day 1 (P = <0.01). CONCLUSIONS: The AcceleDent Aura appliance had no effect compared with no appliance on increasing anterior arch perimeter, or reducing irregularity or perceived discomfort during initial alignment with fixed appliances, although more subjects used painkillers at 24 hours in the no-appliance group. REGISTRATION: This trial was not registered. PROTOCOL: The protocol was not published before trial commencement. FUNDING: A special research grant was obtained from the Australian Society of Orthodontists Foundation for Research and Education to purchase the AcceleDent Aura appliances and fund the statistical analysis.

Quantitative and qualitative assessment of anchorage loss during en-masse retraction with indirectly loaded miniscrews in patients with bimaxillary protrusion.

INTRODUCTION: This study provides vital insight in assessing anchorage loss when miniscrews are indirectly loaded. METHODS: The study sample comprised 18 patients with bimaxillary protrusion (14 girls, 4 boys; mean age, 17.3 ± 4.6 years) selected from a database of 89 patients treated with miniscrews. All subjects who were selected required extraction of all first premolars and maximum anchorage. After initial leveling and aligning, miniscrews were placed between the first molar and the second premolar in all 4 quadrants and loaded by the indirect method at 3 weeks after placement with 200-g nickel-titanium alloy closed-coil springs for en-masse retraction. Mean treatment duration was 29.7 ± 6.8 months. Pretreatment and posttreatment lateral cephalograms were analyzed to measure the amount of anchorage loss, incisor retraction, and the incisors' angular change in reference to the pterygoid vertical reference line and were evaluated by the structural superimposition method. RESULTS: The ratio of incisor retraction to molar protraction was 4.2 in the maxilla and 4.7 in the mandible. The first molars showed mean extrusion of 0.20 mm in the maxilla and 0.57 mm in the mandible; these were statistically insignificant. The mean angular change of the first molars was -2.43° in the maxilla and -0.03° in the mandible. The mean anchorage loss in reference to the pterygoid vertical was 1.3 mm in the maxilla and 1.1 mm in the mandible; these were statistically significant. Structural superimpositions showed mean change in molar position of 0.83 mm in the maxilla and 0.87 mm in the mandible, and 5.77 mm in the maxillary incisor and 5.43 mm in the mandibular incisor. These results were compared with the direct anchorage method reported in the literature. CONCLUSIONS: Indirect miniscrew anchorage can be a viable alternative to direct anchorage.