Cone-beam computed tomography (CBCT) dose optimization technique and image quality assessment scoring.

INTRODUCTION: Linear accelerator (LINAC) embedded with kV source-imager system is capable to do image-guided radiotherapy. The only disadvantage of cone-beam computed tomography image acquisition during treatment is the extra radiation dose to the patient. The aim of this study is to optimize the CBCT imaging doses likely to be received by the patient undergoing radiotherapy without affecting image quality. MATERIAL AND METHODS: The imaging dose to the patient was estimated on CTDI phantoms. The effect of additional filters of different materials (copper, brass, aluminum of thickness 0.1 mm each) was evaluated to find the optimized dose imaging technique. For the pelvis, a single imaging protocol available on the machine was used, whereas for the head and neck region, two protocols, high-quality head and standard-dose head were used. The image quality was assessed on CATPHAN-504 phantom using Owl CATPHAN® QA online tool. A new term "Image Assessment score" (IAS) was introduced to evaluate the image quality. RESULT: In the pelvis protocol, CBCT imaging doses with an additional 0.1-mm brass, copper, and aluminum filter were measured to be reduced by 7.1%, 4.7%, and 2.5%, respectively, whereas for high-quality head protocol, the dose reduction was 25.4% (with brass filter), 22% (with copper filter), and 3.1% (with aluminum filter). For the standard-dose head protocol, doses were reduced by 7.5%, 2.8%, and 2.1% with additional 0.1-mm brass copper and aluminum filters, respectively. Acceptable image quality was observed with all the filters. CONCLUSION: Although the reconstructed images were found somewhat noisier, they did not affect the purpose of imaging, that is, treatment position verification. It was observed that these extra filters further reduce the imaging dose without much affecting the image quality.

Age and Gender-related Morphometric Assessment and Degenerative Changes of Temporomandibular Joint in Symptomatic Subjects and Controls using Cone Beam Computed Tomography (CBCT): A Comparative Analysis.

BACKGROUND: The temporomandibular joint diseases have been associated with various predisposing factors. Joint spaces, articular eminence height and inclination, and the shapes of the condylar and glenoid fossa have all been shown to vary in temporomandibular joint diseases (TMD) patients. Advanced imaging techniques like cone beam computed tomography (CBCT) have been employed to estimate these parameters. AIMS AND OBJECTIVES: The aim of the current study was to investigate the condylar morphology, condylar and glenoid fossa shapes, and assessment of joint spaces, such as anterior, posterior, superior, lateral, and medial spaces, through CBCT slices in coronal and sagittal planes and compare them between the control group and TMD group. MATERIALS AND METHODS: A cross-sectional study was planned where 80 joints in 40 patients were assessed for the above parameters; group I consisted of healthy patients, and group II included those with temporomandibular joint diseases (TMDs). The articular eminence height and inclination were assessed on the midsagittal section. The condylar changes and shapes of the glenoid fossa and condyles, as well as the joint spaces, were assessed on the selected coronal and sagittal sections. RESULTS: The condylar fossa had a triangular shape in the TMJ group and an oval shape in the control group. The results were highly significant (P = 0.000**). A highly significant difference in morphological parameters, such as AJS, PJS, SJS, MJS, LJS, articular eminence height, and inclination, was found between the two groups (P = 0.000**). The association of morphological parameters, such as AJS, PJS, SJS, MJS, LJS, and articular eminence height and inclination were compared with condylar and glenoid fossa shapes, where the association of superior joint space and articular eminence inclination was observed. A highly significant difference was noted between the two groups with regard to all the parameters with P=0.00*. CONCLUSION: The articular eminence inclination, as well as the superior joint space, were found to be associated with the glenoid and condyle fossa shapes in the TMJ group. These observations would, therefore, help in the early diagnosis of temporomandibular joint diseases.

PET/SPECT/spectral-CT/CBCT imaging in a small-animal radiation therapy platform: A Monte Carlo study-Part I: Quad-modal imaging.

BACKGROUND: In spite of the tremendous potential of game-changing biological image- and/or biologically guided radiation therapy (RT) and adaptive radiation therapy for cancer treatment, existing limited strategies for integrating molecular imaging and/or biological information with RT have impeded the translation of preclinical research findings to clinical applications. Additionally, there is an urgent need for a highly integrated small-animal radiation therapy (SART) platform that can seamlessly combine therapeutic and diagnostic capabilities to comprehensively enhance RT for cancer treatment. PURPOSE: We investigated a highly integrated quad-modal on-board imaging configuration combining positron emission tomography (PET), single-photon emission computed tomography (SPECT), photon-counting spectral CT, and cone-beam computed tomography (CBCT) in a SART platform using a Monte Carlo model as a proof-of-concept. METHODS: The quad-modal on-board imaging configuration of the SART platform was designed and evaluated by using the GATE Monte Carlo code. A partial-ring on-board PET imaging subsystem, utilizing advanced semiconductor thallium bromide detector technology, was designed to achieve high sensitivity and spatial resolution. On-board SPECT, photon-counting spectral-CT, and CBCT imaging were performed using a single cadmium zinc telluride flat detector panel. The absolute peak sensitivity and scatter fraction of the PET subsystem were estimated by using simulated phantoms described in the NEMA NU-4 standard. The spatial resolution of the PET image of the platform was evaluated by imaging a simulated micro-Derenzo hot-rod phantom. To evaluate the quantitative imaging capability of the system's spectral CT, the Bayesian eigentissue decomposition (ETD) method was utilized to quantitatively decompose the virtual noncontrast (VNC) electron densities and iodine contrast agent fractions in the Kidney1 inserts mixed with the iodine contrast agent within the simulated phantoms. The performance of the proposed quad-model imaging in the platform was validated by imaging a simulated phantom with multiple imaging probes, including an iodine contrast agent and radioisotopes of 18F and 99mTc. RESULTS: The PET subsystem demonstrated an absolute peak sensitivity of 18.5% at the scanner center, with an energy window of 175-560 KeV, and a scatter fraction of only 3.5% for the mouse phantom, with a default energy window of 480-540 KeV. The spatial resolution of PET on-board imaging exceeded 1.2 mm. All imaging probes were identified clearly within the phantom. The PET and SPECT images agreed well with the actual spatial distributions of the tracers within the phantom. Average relative errors on electron density and iodine contrast agent fraction in the Kidney1 inserts were less than 3%. High-quality PET images, SPECT images, spectral-CT images (including iodine contrast agent fraction images and VNC electron density images), and CBCT images of the simulated phantom demonstrated the comprehensive multimodal imaging capability of the system. CONCLUSIONS: The results demonstrated the feasibility of the proposed quad-modal imaging configuration in a SART platform. The design incorporates anatomical, molecular, and functional information about tumors, thereby facilitating successful translation of preclinical studies into clinical practices.

Organ dose prediction for patients undergoing radiotherapy CBCT chest examinations using artificial intelligence.

PURPOSE: To propose an artificial intelligence (AI)-based method for personalized and real-time dosimetry for chest CBCT acquisitions. METHODS: CT images from 113 patients who underwent radiotherapy treatment were collected for simulating thorax examinations using cone-beam computed tomography (CBCT) with the Monte Carlo technique. These simulations yielded organ dose data, used to train and validate specific AI algorithms. The efficacy of these AI algorithms was evaluated by comparing dose predictions with the actual doses derived from Monte Carlo simulations, which are the ground truth, utilizing Bland-Altman plots for this comparative analysis. RESULTS: The absolute mean discrepancies between the predicted doses and the ground truth are (0.9 ± 1.3)% for bones, (1.2 ± 1.2)% for the esophagus, (0.5 ± 1.3)% for the breast, (2.5 ± 1.4)% for the heart, (2.4 ± 2.1)% for lungs, (0.8 ± 0.6)% for the skin, and (1.7 ± 0.7)% for integral. Meanwhile, the maximum discrepancies between the predicted doses and the ground truth are (14.4 ± 1.3)% for bones, (12.9 ± 1.2)% for the esophagus, (9.4 ± 1.3)% for the breast, (14.6 ± 1.4)% for the heart, (21.2 ± 2.1)% for lungs, (10.0 ± 0.6)% for the skin, and (10.5 ± 0.7)% for integral. CONCLUSIONS: AI models that can make real-time predictions of the organ doses for patients undergoing CBCT thorax examinations as part of radiotherapy pre-treatment positioning were developed. The results of this study clearly show that the doses predicted by analyzed AI models are in close agreement with those calculated using Monte Carlo simulations.

Quantitative assessment of cleft volume and evaluation of cleft's impact on adjacent anatomical structures using CBCT imaging.

OBJECTIVES: To determine pre-operative cleft volume and evaluate cleft´s impact on surrounding anatomical structures in children and adolescents with orofacial clefts using cone bean computed tomography (CBCT) imaging. METHODS: The present retrospective study retrieved CBCT examinations of 68 patients from a previous study. The examinations had been exposed either before (n = 53) or after (n = 15) alveolar bone grafting. Pre-operative volume of cleft was determined, and type and location were evaluated. Morphological changes on the adjacent anatomical structures, including the incisive foramen, the nasal septum and floor, and the inferior turbinate, were assessed. RESULTS: Mean bilateral cleft volume was 0.76 cm3, while mean unilateral cleft volume was 1.08 cm3; the difference was significant (p < 0.001). Variation in cleft volume, however, was large. The incisive foramen was not visible in the majority of cases with bilateral clefts (71%); the difference was significant (p = 0.001). In cases with unilateral clefts, the nasal septum in 87% was curved towards the cleft or graft side. Also, the mean size of the widest part of the inferior turbinate was 8.8 mm on the cleft or graft side and 10.4 mm on the non-cleft side. The difference was significant (p < 0.001). CONCLUSIONS: When required, CBCT is a feasible method for quantitatively illustrating alveolar clefts and their impact on the morphological development of surrounding structures. Variation in cleft volume was large.

Comparison of CBCT radiation doses with conventional radiographs in TMJ imaging using Monte Carlo simulations.

Three-dimensional imaging methods are widely used for evaluation of bony changes of temporomandibular joint (TMJ). Besides, lateral and posterio-anterior TMJ projections in both closed- and open-jaw positions for each temporomandibular joint are used as two-dimensional diagnostic tools. The purpose of the present study was to compare effective and mean organ absorbed doses of plain radiography techniques with those of different modalities of cone beam computed tomography (CBCT) scanning of an adult's temporomandibular joint. PCXMC 2.0 software was used to calculate mean organ and effective doses. A NewTom CBCT device (Newtom 5G XL; QR systems; Verona, Italy) was simulated at 360° rotation using a 6 × 6 cm2 FOV in standard and high-resolution modes. Lateral and posterio-anterior TMJ plain projections were simulated according to recommendations of the manufacturer of the Planmeca ProMax® 2D S3 device. Doses for both projections were simulated with Monte Carlo methods and the International Commission on radiological protection adult reference computational phantoms. The highest mean organ absorbed doses occurred in bone surfaces, salivary glands, and skull for posterio-anterior TMJ and lateral TMJ, and for CBCT scanning in all examinations. The effective doses of posterio-anterior and lateral TMJ plain radiographs were found to be higher than those of the Standard Mode-Eco Scan CBCT. Therefore, the lowest effective dose was calculated in Standard Mode-Eco Scan CBCT. It is concluded that NewTom 5G XL Standard Mode-Eco Scan CBCT can be used instead of plain radiographs (lateral and posterio-anterior TMJ) in temporomandibular joint imaging as it allows visualizing the three-dimensional structure of the temporomandibular joint as an advantage.

Diagnostic accuracy of MRI-CBCT fused images in assessment of clinically diagnosed internal derangement of the temporomandibular joint.

OBJECTIVES: To evaluate the diagnostic accuracy of Fused (MRI)-CBCT images in the assessment of internal derangement of the temporomandibular joint. METHODS: MRI and CBCT images of the TMJ were evaluated bilaterally in 10 patients with clinically diagnosed internal derangement. Image fusion was performed using Amira 3D Software (version 5.4.3, Thermo Fisher Scientific Inc.). RESULTS: The AUC index for MRI-CBCT fused images was 0.83, which was significantly different from the null hypothesis value of 0.5. This was confirmed by inter-examiner reliability index of 0.87, which is statistically significant. CONCLUSION: MRI-CBCT fused images can significantly improve the accuracy and inter-examiner reliability in the evaluation of clinically diagnosed cases with internal derangement.

Midpalatal suture maturation in 15- to 35-year-olds: morphological assessment in the coronal plane using CBCT-an exploratory study.

Rapid maxillary expansion (RME) is used in patients presenting transverse maxillary deficiency. However, RME may be unpredictable after late adolescence if the midpalatal sutural maturation stage (MPMS) is in late stage. Since MPMS evaluation is influenced by the expertise of the operator and image quality, this classification method could be complemented. Therefore, this study aimed to analyze the morphology of the midpalatal suture (MPS) and its surrounding bone in the coronal plane using cone beam computed tomography (CBCT) images of adolescents and young adults and to correlate the findings with their respective MPMS status. CBCT scans of 200 patients aged 15-35 years of both sexes were evaluated. MPS and surrounding bone tissue characteristics in the coronal and axial sections were analyzed, and MPMS was evaluated (A to E). Six categories were identified for the coronal evaluation, analyzing it in 2 standardized locations. Sutural morphology: I, hypodense sutural line limited by 2 hyper-dense para-sutural lines; II, hypodense sutural line; and III, suture not visible. The presence of para-sutural cancellous bone: CB0, compact bone; CB1, dense cancellous tissue; CB2, spaced cancellous bone. Midpalatal bone thickness (MBTh) was also measured. ANOVA-Bonferroni, chi-square, logistic regression and t-tests were used. MPMS increased with age. Sutural morphology I and CB0 bone were the most prevalent. Here we show that sutural morphology, para-sutural bone characteristics, and MPSM were significantly associated. The coronal evaluation of the MPS can complement the information from the MPSM assessment, allowing the identification of patent MPS even in the presence of late MPSM.

Assessment of gubernacular canal frequency with CBCT in a group of Turkish population.

OBJECTIVE: The aim of this study is to investigate the frequency of the gubernacular canal observed on cone-beam computed tomography (CBCT) images in a group of Turkish populations according to age and gender. MATERIALS AND METHODS: CBCT images of 500 cases were evaluated retrospectively, and a total of 117 impacted or erupting teeth were included in the study, and the presence of gubernacular canal was recorded according to age, gender and eruption status of the tooth. SPSS program was used for statistical analysis. RESULTS: The mean age of 117 buried/continuing patients was 17 ± 15.32, 55 (47%) were female and were 62 (53%) male patients. Presence of gubernacular canal was observed in 91 (77.8%) cases and this duct was not detected in 26 (22.2%) cases. While 40.2% of female were found to have canals, 37.6% of male had canals. When the presence of canals was examined, the presence of canals was found to be significantly higher in the erupting teeth. A significant difference was found when analyzed according to the mean age. CONCLUSIONS: CBCT is a useful method of detecting the gubernacular canal. The presence of gubernacular canal was significantly higher in erupting teeth.

Reliability and reproducibility of CBCT assessment of mandibular changes before and after treatment for Class III growing patients - an easy and quick way for evaluation.

The objective of this study was to evaluate intraobserver reliability and inter-observer reproducibility of a 3-dimensional (3D) assessment method for mandibular changes of growing patients after orthodontic treatment for Class III malocclusion.Methods Cone-beam computed tomography (CBCT) scans were performed before and after orthodontic treatment for 27 patients. During the scan, the patient was positioned such that his/her mandibular plane was parallel to floor. Three observers independently worked on the DICOM data, reconstructed the pre- and post-treatment 3D models in software, selected the stable anatomical structures (basal bone area from the lingual surface of the symphysis to the distal aspect of the first molars) to guide the automated superimposition process. Then, each observer registered 14 anatomical landmarks on the virtual models, for three times after suitable interval, to generate 3 sets of coordinates; the mean was taken as the coordinates for that particular landmark. The intraobserver reliability and inter-observer reproducibility of the method were analyzed.Results The ICCs was > 0.90 for 25 (92.6%) of the intraobserver assessments. The precision of the measurement method was < 0.3 mm in 24 (88.9%) cases. The interobserver reproducibility errors were < 0.3 mm in 21 of the 27 cases.Conclusions The intraobserver reliability and inter-observer reproducibility of 3D assessment of mandibular changes using the virtual models were excellent.

Assessment of CBCT gray value in different regions-of-interest and fields-of-view compared to Hounsfield unit.

OBJECTIVES: Different factors can affect the discrepancy between the gray value (GV) measurements obtained from CBCT and the Hounsfield unit (HU) derived from multidetector CT (MDCT), which is considered the gold-standard density scale. This study aimed to explore the impact of region of interest (ROI) location and field of view (FOV) size on the difference between these two scales as a potential source of error. METHODS: Three phantoms, each consisting of a water-filled plastic bin containing a dry dentate human skull, were prepared. CBCT scans were conducted using the NewTom VGi evo system, while MDCT scans were performed using Philips system. Three different FOV sizes (8 × 8 cm, 8 × 12 cm, and 12 × 15 cm) were used, and the GVs obtained from eight distinct ROIs were compared with the HUs from the MDCT scans. The ROIs included dental and bony regions within the anterior and posterior areas of both jaws. Statistical analyses were performed using SPSS v. 26. RESULTS: The GVs derived from CBCT images were significantly influenced by both ROI location and FOV size (p < 0.05 for both factors). Following the comparison between GVs and HUs, the anterior mandibular bone ROI represented the minimum error, while the posterior mandibular teeth exhibited the maximum error. Moreover, the 8 × 8 cm and 12 × 15 cm FOVs resulted in the lowest and highest degrees of GV error, respectively. CONCLUSIONS: The ROI location and the FOV size can significantly affect the GVs obtained from CBCT images. It is not recommended to use the GV scale within the posterior mandibular teeth region due to the potential for error. Additionally, selecting smaller FOV sizes, such as 8 × 8 cm, can provide GVs closer to the gold-standard numbers.

Quantitative assessment of condylar bone resorption using fused CBCT images: differentiating and diagnosing three distinct groups based on volume and thickness decrease.

OBJECTIVES: To investigate the accuracy of fused CBCT images in diagnosing three distinct groups of bone changes characterized by volume and thickness decrease in patients with temporomandibular joint osteoarthrosis (TMJ OA) during follow-up. METHODS: In this retrospective study, 109 patients (176 TMJs) with TMJ OA were included. Two consecutive CBCT images for the same patient were registered and fused. Then, three image sets were established: without fusion, fused 2D image, and fused 3D image. Three residents randomly and independently evaluated whether there was condylar resorption with the three image sets respectively. The samples diagnosed as condylar resorption by the expert panel were divided into three subgroups according to the volume and thickness decrease calculated after segmentation. The inter- and intraobserver agreement, receiver operating characteristic (ROC), and area under the curve (AUC) evaluated the diagnostic capability for different subgroups. RESULTS: For the volume decrease more than 50 mm3 and thickness decrease more than 1 mm groups, the AUC values for fused image sets were higher than those without fusion (p < 0.01). For the volume decrease within 50 mm3 and thickness decrease within 1 mm groups, the AUC values for fused 2D image sets were higher than the image sets without fusion (p < 0.05), but there was no significant difference between the fused 3D image sets and the image sets without fusion (p = 0.48 for volume decrease, p = 0.37 for thickness decrease). CONCLUSIONS: The fused images can improve the diagnostic accuracy and repeatability for the samples with at least 50 mm3 volume decrease or 1 mm thickness decrease compared with the image groups without fusion.

Comparison of accuracy and reliability of CBCT and 3D laser scanner in the volumetric assessment of the root canal space.

PURPOSE: To compare the accuracy and reliability of cone-beam computed tomography (CBCT) and laser scanner in measuring minor volume changes such as the root canal space. METHODS: 35 maxillary incisors were endodontically prepared. A dimensionally stable silicone material was injected into the root canal space and scanned with CBCT. The root canal volume was measured using Romexis 3.0.1 R software. Replicas were carefully removed from the teeth and scanned using an extraoral laser scanner. These images were exported to the Rhinoceros software for volume measurement. The volume of each replica was also assessed using the gravimetric method. To determine the accuracy, the volume obtained from both devices was compared with the gravimetric method. Statistical analysis was done using a paired t-test. The reliability was assessed using the intraclass correlation coefficient. RESULTS: There was no statistically significant difference between the mean volume of CBCT 27.04 ± 7.25 mm³ and the mean volume of the gravimetric method 27.87 ± 7.17 mm³ (P< 0.05). A statistically significant difference was seen with the laser scanner at 25.31 ± 6.89 mm³ and the gravimetric method at 27.87 ± 7.17 mm³ (P< 0.05). CBCT showed a good degree of agreement (ICC 0.899), while the laser scanner showed a moderate degree of agreement (ICC 0.644) with the gravimetric method. CBCT proved accurate and reliable in measuring minor volumes like the root canal space, ideally in the range of 20-25 mm³. The laser scanner presented acceptable reliability. CLINICAL SIGNIFICANCE: The laboratory data showed satisfactory outcomes, providing an evidence-based approach and potentially motivating clinicians to integrate cone-beam computed tomography for volume analysis into clinical practice. The accuracy and reliability of laser scanners for small-volume analysis have not previously been evaluated. Consequently, the findings from this study warrant further clinical investigations.

Comparative Evaluation of a Lower-Dose CBCT Acquisition Protocol for Preoperative Implant Site Assessment in Dry Human Skulls: A Proof-of-Concept Study.

Restoration of edentulous sites with dental implants is increasingly becoming a popular choice. Cross-sectional 3-dimensional imaging using cone-beam computed tomography (CBCT) provides a better depiction of the implant site to help the clinician plan the procedure better. In spite of the advantages, radiation dose will always remain a concern. The evolution of lower-dose protocols is ongoing, but whether those acquisition protocols yield comparable diagnostic information is still not well established. The objective of this study was to evaluate the diagnostic efficacy of a low-dose, 180° rotational CBCT acquisition protocol for evaluating a potential implant site in comparison with a conventional 360° rotational acquisition. Ten dentate and partially edentulous dry human skulls providing 82 randomized implant sites-40 in the maxilla and 42 in the mandible-were chosen for this study. Each skull was imaged using a 360° and a 180° rotational acquisition on a J. Morita Accuitomo CBCT scanner. Evaluation of cortical and trabecular bone, height, width, and proximity to critical structures, such as the inferior alveolar nerve canal and the maxillary sinus, were measured. An oral surgeon and an oral radiologist rated the diagnostic efficacy of the scans by evaluating the above characteristics. Statistical evaluation of the data with linear regression showed significant agreement between both protocol measurements. Kappa analyses yielded a good interobserver agreement. In this proof-of-concept study, CBCT imaging using the lower-dose, modified arc, and 180° acquisition protocol shows comparable results to the conventional 360° protocol for preoperative implant assessment.

Quantitative assessment of image artifacts from zygoma implants on CBCT scans using different exposure parameters.

This study was aimed at quantifying artifacts from zygoma implants in cone-beam computed tomography (CBCT) images using different exposure parameters. Two cadaver heads, one with two zygoma implants on each side and the other for control, were scanned using 18 different exposure parameters. Quantitative analysis was performed to evaluate the hypodense and hyperdense artifact percentages calculated as the percentage of the area. Hyperdense artifacts and hypodense artifacts were detected, followed by the calculation of the hyperdense and hypodense artifact percentages in the image. In the qualitative analysis of the artifacts, the scores used were as follows: absence (0), moderate presence (1), or high presence (2) for hypodense halos, thin hypodense lines, and hyperdense lines. Artifact analysis was performed qualitatively and quantitatively using the post-hoc Tukey and Two-way ANOVA tests. As a result, in the qualitative analyses, zygoma implants showed a significant difference compared to the control group with regard to hyperdense and hypodense artifacts (p < 0.05). There was a significant difference between the means according to the FOV size arithmetic averages (p < 0.05). In terms of voxel size, the difference was found to be significant, where 400 microns showed the highest hypodense artifact while 200 microns showed the lowest hypodense artifact. In conclusion, hypodense and hyperdense artifacts were significantly higher in cadavers with zygoma implants than in controls. As FOV and voxel size increase, more hypodense artifacts are produced by zygoma implants so smaller FOV and voxel sizes should be used to prevent poor image quality of adjacent teeth.

Quantitative Assessment of Dimensional Evaluation and Artefacts from Filling Materials with CBCT Using Standard Phantom Roots.

OBJECTIVE: To investigate the accuracy of dimensional evaluation and representation of artefacts generated by different gutta-percha (GP) cones with or without sealer with CBCT using a reproducible, standardised phantom root methodology. METHODS: The reproducible artificial phantom roots with six root canal sizes from #25 to #50 and 0.04 taper were aligned according to the jaw curvature in a stone model for dimensional measurements. Each root was scanned while empty and filled with four types of filling materials. The specimens were scanned using the CS 9300 3D (Carestream Dental, Rochester, NY, USA) (at two different resolutions), 3D Accuitomo (J Morita, Kyoto, Japan) and NewTom VGi (Verona, Italy) CBCT systems. The hyperdense and hypodense axial slice artefacts from root canal sizes #40, #45 and #50 were recorded. RESULTS: Dimensions were significantly smaller and more accurate with CS 9300/0.09 mm voxel size than with other protocols. The hypodense band was found mostly in the CS 9300 3D system with 0.18 mm voxel size, especially in the buccal-lingual (95%) and coronal (64%) sections. The 3D Accuitomo CBCT system showed the lowest presence of the hypodense band. Areas of both light and dark artefacts were significantly larger in the coronal third than in the apical and middle thirds. CONCLUSION: Artefacts in the coronal locations and in buccal-lingual sections were more evident in the CS 9300 3D system with a 0.18-mm voxel size.

A novel method of assessment of BMD using CBCT for implant placement: A retrospective study.

Nowadays, dental implant evolves as an alternative treatment modality for oral rehabilitation. The success of dental implants is largely dependent on bone density; Cone-beam computed tomography (CBCT) is a well-known modus operandi for the volumetric measurement of bone mineral density (BMD), which measures Grayscale values on 3-D images. This study was conducted with the aim to analyze bone density with CBCT and also test its reliability and reproducibility using Galileos Sirona CBCT Viewer Software and Philips digital imaging and communications in medicine (DICOM) Viewer. A total of 75, CBCT images were obtained from the Department of Oral Radiology, retrospectively, and, BMD in Hounsfield units (HUs) was evaluated in a standardized implant area superimposed on the images. Bone density was also calculated by 2 different independent observers. The estimation of sample size was achieved to attain a power of 90% with 0.5 alpha error and 0.2 effect size as per a previous study. Statistical analysis was performed by statistical package for the social sciences version 22.0; data were presented as mean and standard deviation and Kappa correlation test was applied to check the reproducibility of values. The mean and standard deviation of grayscale values and HUs attained from the interdental area of front teeth were 1837 (288.76) and 270 (125.4), respectively, with a conversion factor of 6.8. Whereas the mean and standard deviation of grayscale values and HUs acquired from posterior interdental spaces were 2880 (489.99) and 640 (204.6), respectively, with a conversion factor of 4.5. To verify the reproducibility Kappa correlation test was applied, which showed correlation values of 0.68 and 0.79. The conversion or exchange factors for grayscale values to HUs determined at the frontal, posterior interdental space area and from the highly radio-opaque area were exceedingly reproducible and consistent. Hence, CBCT can be used as one of the valuable techniques in the estimation of bone density.

A novel method for assessment of human midpalatal sutures using CBCT-based geometric morphometrics and complexity scores.

INTRODUCTION: Management of dentofacial deficiencies requires knowledge about sutural morphology and complexity. The present study assesses midpalatal sutural morphology based on human cone-beam computed tomography (CBCT) using geometric morphometrics (GMM) and complexity scores. The study is the first to apply a sutural complexity score to human CBCT datasets and demonstrates the potential such a score has to improve objectiveness and comparability when analysing the midpalatal suture. MATERIALS AND METHODS: CBCTs of various age and sex groups were analysed retrospectively (n = 48). For the geometric morphometric analysis, landmark acquisition and generalised Procrustes superimposition were combined with principal component analysis to detect variability in sutural shape patterns. For complexity analysis, a windowed short-time Fourier transform with a power spectrum density (PSD) calculation was applied to resampled superimposed semi-landmarks. RESULTS: According to the GMM, younger patients exhibited comparable sutural patterns. With increasing age, the shape variation increased among the samples. The principal components did not sufficiently capture complexity patterns, so an additional methodology was applied to assess characteristics such as sutural interdigitation. According to the complexity analysis, the average PSD complexity score was 1.465 (standard deviation = 0.010). Suture complexity increased with patient age (p < 0.0001), but was not influenced by sex (p = 0.588). The intra-class correlation coefficient exceeded 0.9, indicating intra-rater reliability. CONCLUSION: Our study demonstrated that GMM applied to human CBCTs can reveal shape variations and allow the comparison of sutural morphologies across samples. We demonstrate that complexity scores can be applied to study human sutures captured in CBCTs and complement GMM for a comprehensive sutural analysis.

Assessment of prevalence and measurement of mandibular lingual concavities using Cone-Beam Computerized Tomography (CBCT) among patients in Jeddah: a cross-sectional study.

OBJECTIVE: Dental implant procedure is the most common way to restore missing teeth but also comes with several complications. Success rates for dental implants are expected to be good when proper diagnosis and planning, study of bone morphology and closeness of implant with vital structures, such as nerves and blood vessels, are made pre-surgery. PATIENTS AND METHODS: This cross-sectional study involved 636 adult patients, aged 18-80 years old, that came for dental implants in screening clinics or referred to specialty clinics in Jeddah, Saudi Arabia for the year 2019 to 2020. Instead of conventional Computed Tomography (CT), Cone Beam Computed Tomography (CBCT) X-Rays have been used to evaluate mandibular lingual concavities. RESULTS: Prevalence and measurement of lingual concavities were determined. Type U mandibles with a lingual concavity, were found to have a higher chance of lingual cortical plate but this may still vary on factors such as type of population and ethnicity. The typical finding in the mandibular posterior region is the lingual undercut. CONCLUSIONS: CBCT is a great tool used to study mandibular lingual concavities and it is essential prior the installation of dental implant to prevent life-threatening complications.

Presentation of a novel surgical technique in periodontally accelerated osteogenic orthodontics. CBCT assessment of the buccal alveolar dimensional changes: a proof-of-concept report of four cases.

OBJECTIVES: The aim of this report was to present the effectiveness of a novel augmented corticotomy performed before orthodontic treatments in the prevention of buccal alveolar dehiscence and gingival recession. METHOD AND MATERIALS: Four periodontally healthy individuals presenting crowding and thin bone morphotype in the mandibular anterior area were treated with a double-layer tunnel flap, piezotomy, and hard and soft-tissue augmentation. Patients were divided into two groups according to the utilized graft material. The exclusive use of demineralized bovine bone minerals (group 2) was compared to the use of autologous concentrated growth factor-enriched bone graft matrix, "sticky bone" (group 1). CBCT measurements were performed before and 6 months after surgery. Orthodontic treatment was initialized 1 week after surgery. RESULTS: Postoperative wound healing was uneventful, and tooth alignments were successful in all cases. Postoperative buccal hard tissue dimensions were favorable in both groups, with no occurring bone dehiscence or gingival recession. The seemingly better results of group 2, in terms of quantitative hard tissue changes, did not have any clinical significance according to the objective to be achieved. In contrast, qualitative radiographic analysis showed a more homogenous tissue formation around teeth in group 1. CONCLUSION: It can be concluded that the presented preorthodontic treatment approach seems to be successful in preventing alveolar dehiscence and gingival recession around buccally inclined mandibular anterior teeth.