[Work accidents and automatic circuit reclosers in the electricity sector: beyond the immediate causes]. / Acidentes de trabalho e os religadores automáticos no setor elétrico: para além das causas imediatas.

The Brazilian electricity sector has recorded high work-related mortality rates that have been associated with outsourcing, used to cut costs. In order to decrease the power outage time for consumers, the industry adopted the automatic circuit recloser as the technical solution. The device has hazardous implications for maintenance workers. The aim of this study was to analyze the origins and consequences of work accidents in power systems with automatic circuit recloser, using the Accident Analysis and Prevention (AAP) model. The AAP model was used to investigate two work accidents, aimed to explore the events' organizational origins. Case 1 - when changing a deenergized secondary line, a worker received a shock from the energized primary cable (13.8kV). The system reclosed three times, causing severe injury to the worker (amputation of a lower limb). Case 2 - a fatal work accident occurred during installation of a new crosshead on a partially insulated energized line. The tip of a metal cross arm section strap touched the energized secondary line and electrocuted the maintenance operator. The circuit breaker component of the automatic circuit recloser failed. The analyses revealed how business management logic can participate in the root causes of work accidents through failures in maintenance management, outsourced workforce management, and especially safety management in systems with reclosers. Decisions to adopt automation to guarantee power distribution should not overlook the risks to workers in overhead power lines or fail to acknowledge the importance of ensuring safe conditions.

O setor elétrico brasileiro registra elevados índices de mortalidade por acidentes de trabalho que vêm sendo associados à terceirização, introduzida como forma de rebaixamento de custos. Para diminuir o tempo de interrupção do fornecimento de energia aos consumidores, o setor adotou, como solução tecnológica, o religador automático. Essa medida apresenta características perversas para os trabalhadores de manutenção. O objetivo deste estudo é analisar origens e consequências de acidentes de trabalho em sistemas elétricos dotados de religador automático utilizando o Modelo de Análise e Prevenção de Acidentes (MAPA). O MAPA foi usado na investigação de dois acidentes de trabalho visando a explorar as origens organizacionais dos eventos. Caso 1 - ao trocar linha secundária desenergizada, um trabalhador foi atingido por cabo primário energizado (13,8kV). O sistema foi religado três vezes, agravando as lesões (amputação de membro inferior). Caso 2 - acidente de trabalho fatal ocorrido durante instalação de cruzeta nova, em linha energizada, parcialmente isolada. A extremidade de uma mão francesa metálica encostou na linha secundária energizada e eletrocutou o operador de manutenção. O componente desligador do religador automático não funcionou. As análises contribuem para desvelar como a lógica de gestão de negócios pode participar nas origens de acidentes de trabalho via falhas da gestão de manutenção, da gestão de força de trabalho de terceiras e, em especial, da gestão de segurança em sistemas dotados de religadores. As decisões pela automação para garantir a distribuição de energia não podem negligenciar os riscos aos trabalhadores da rede elétrica e, tampouco, deixar de reconhecer a importância do controle sobre as condições de segurança.

El sector eléctrico brasileño registra elevados índices de mortalidad por accidentes de trabajo, que están siendo asociados a la tercerización, introducida como forma de reducción de costes. Para disminuir el tiempo de interrupción de la energía a los consumidores, el sector adoptó como solución tecnológica, el reconectador automático. Esta medida presenta características perversas para los trabajadores del sector de mantenimiento. El objetivo de este estudio es analizar los orígenes y consecuencias de los accidentes de trabajo en sistemas eléctricos dotados de reconectador automático, utilizando el Modelo de Análisis y Prevención de Accidentes (MAPA). El MAPA se usó en la investigación de dos accidentes de trabajo, con el objetivo de explorar las causas organizativas de los eventos. Caso 1 - al cambiar la línea secundaria sin energía, un trabajador fue alcanzado por un cable primario con energía (13,8kV). El sistema se reconectó tres veces, agravando las lesiones (amputación de miembro inferior). Caso 2 - accidente de trabajo fatal ocurrido durante la instalación de una cruceta nueva, en una línea con energía, parcialmente aislada. La extremidad de una cruceta metálica cayó en la línea secundaria con energía y electrocutó al obrero de mantenimiento. El componente que desconectaba el reconectador automático no funcionó. Los análisis contribuyen a desvelar cómo la lógica de gestión de negocios puede ser partícipe en las causas de accidentes de trabajo, vía fallos en la gestión del mantenimiento, de la gestión de fuerza de trabajo de terceras personas y, en especial, de la gestión de seguridad en sistemas dotados de reconectadores. Las decisiones de la automatización para garantizar la distribución de energía no pueden obviar los riesgos para los trabajadores de la red eléctrica y tampoco dejar de reconocer la importancia del control sobre las condiciones de seguridad.

Wildfires as collateral effects of wildlife electrocution: An economic approach to the situation in Spain in recent years.

The interaction between wildlife and power lines has collateral effects that include wildfires and Carbon Dioxide (CO2) emissions. However, currently available information is scarce and so new approaches are needed to increase our understanding of this issue. Here, we present the first analysis of wildfires and their incidence as a result of this interaction in Spain during the period 2000-2012. Amongst the 2788 Power-Line Mediated Wildfires (PLMW recorded) during this period, 30 records of Fauna Mediated Wildfires (FMW) were found, with an average affected vegetation cover of 9.06ha. Our findings suggest that no significant differences were observed between the amount of affected surface area due to fauna mediated wildfires and power-line mediated wildfires. In both cases, a space-grouping trend was observed. In terms of changing trends over time, after the first incident detected in 2005, the number of incidents increased until 2008, year in which the percentage of wildfires caused by wildlife stabilized at approximately 2.4% of all power-line-induced wildfires. Population density and road abundance were variables that better explained PLMW whereas for FMW, the models that included land use and raptor abundance. In the multivariate model, FMW emergence was positively related with population density, percentage of grazing areas and Natura 2000 cover, and predatory abundance; and negatively with the percentage of forested area. No significant differences were observed between the species of birds that caused wildfires and the species of ringed birds killed by electrocution. The economic and environmental impact due to necessary repairs, the loss of biodiversity and CO2 emissions represent an estimated net value of €7.6-12.4M for the period 2000-2012, which indicates the importance of the economic and environmental costs associated with wildfires.

Acidentes de trabalho e os religadores automáticos no setor elétrico: para além das causas imediatas / Work accidents and automatic circuit reclosers in the electricity sector: beyond the immediate causes / Accidentes de trabajo y reconectadores automáticos en el sector eléctrico: más allá de las causas inmediatas

Resumo: O setor elétrico brasileiro registra elevados índices de mortalidade por acidentes de trabalho que vêm sendo associados à terceirização, introduzida como forma de rebaixamento de custos. Para diminuir o tempo de interrupção do fornecimento de energia aos consumidores, o setor adotou, como solução tecnológica, o religador automático. Essa medida apresenta características perversas para os trabalhadores de manutenção. O objetivo deste estudo é analisar origens e consequências de acidentes de trabalho em sistemas elétricos dotados de religador automático utilizando o Modelo de Análise e Prevenção de Acidentes (MAPA). O MAPA foi usado na investigação de dois acidentes de trabalho visando a explorar as origens organizacionais dos eventos. Caso 1 - ao trocar linha secundária desenergizada, um trabalhador foi atingido por cabo primário energizado (13,8kV). O sistema foi religado três vezes, agravando as lesões (amputação de membro inferior). Caso 2 - acidente de trabalho fatal ocorrido durante instalação de cruzeta nova, em linha energizada, parcialmente isolada. A extremidade de uma mão francesa metálica encostou na linha secundária energizada e eletrocutou o operador de manutenção. O componente desligador do religador automático não funcionou. As análises contribuem para desvelar como a lógica de gestão de negócios pode participar nas origens de acidentes de trabalho via falhas da gestão de manutenção, da gestão de força de trabalho de terceiras e, em especial, da gestão de segurança em sistemas dotados de religadores. As decisões pela automação para garantir a distribuição de energia não podem negligenciar os riscos aos trabalhadores da rede elétrica e, tampouco, deixar de reconhecer a importância do controle sobre as condições de segurança.

Abstract: The Brazilian electricity sector has recorded high work-related mortality rates that have been associated with outsourcing, used to cut costs. In order to decrease the power outage time for consumers, the industry adopted the automatic circuit recloser as the technical solution. The device has hazardous implications for maintenance workers. The aim of this study was to analyze the origins and consequences of work accidents in power systems with automatic circuit recloser, using the Accident Analysis and Prevention (AAP) model. The AAP model was used to investigate two work accidents, aimed to explore the events' organizational origins. Case 1 - when changing a deenergized secondary line, a worker received a shock from the energized primary cable (13.8kV). The system reclosed three times, causing severe injury to the worker (amputation of a lower limb). Case 2 - a fatal work accident occurred during installation of a new crosshead on a partially insulated energized line. The tip of a metal cross arm section strap touched the energized secondary line and electrocuted the maintenance operator. The circuit breaker component of the automatic circuit recloser failed. The analyses revealed how business management logic can participate in the root causes of work accidents through failures in maintenance management, outsourced workforce management, and especially safety management in systems with reclosers. Decisions to adopt automation to guarantee power distribution should not overlook the risks to workers in overhead power lines or fail to acknowledge the importance of ensuring safe conditions.

Resumen: El sector eléctrico brasileño registra elevados índices de mortalidad por accidentes de trabajo, que están siendo asociados a la tercerización, introducida como forma de reducción de costes. Para disminuir el tiempo de interrupción de la energía a los consumidores, el sector adoptó como solución tecnológica, el reconectador automático. Esta medida presenta características perversas para los trabajadores del sector de mantenimiento. El objetivo de este estudio es analizar los orígenes y consecuencias de los accidentes de trabajo en sistemas eléctricos dotados de reconectador automático, utilizando el Modelo de Análisis y Prevención de Accidentes (MAPA). El MAPA se usó en la investigación de dos accidentes de trabajo, con el objetivo de explorar las causas organizativas de los eventos. Caso 1 - al cambiar la línea secundaria sin energía, un trabajador fue alcanzado por un cable primario con energía (13,8kV). El sistema se reconectó tres veces, agravando las lesiones (amputación de miembro inferior). Caso 2 - accidente de trabajo fatal ocurrido durante la instalación de una cruceta nueva, en una línea con energía, parcialmente aislada. La extremidad de una cruceta metálica cayó en la línea secundaria con energía y electrocutó al obrero de mantenimiento. El componente que desconectaba el reconectador automático no funcionó. Los análisis contribuyen a desvelar cómo la lógica de gestión de negocios puede ser partícipe en las causas de accidentes de trabajo, vía fallos en la gestión del mantenimiento, de la gestión de fuerza de trabajo de terceras personas y, en especial, de la gestión de seguridad en sistemas dotados de reconectadores. Las decisiones de la automatización para garantizar la distribución de energía no pueden obviar los riesgos para los trabajadores de la red eléctrica y tampoco dejar de reconocer la importancia del control sobre las condiciones de seguridad.

Understanding the burden and outcome of trauma care drives a new trauma systems model.

BACKGROUND: The Pietermaritzburg Metropolitan Trauma Service (PMTS) attempts to provide care for a whole city and hence is referred to as a service rather than a center. As part of a multifaceted quality improvement program, the PMTS has developed and implemented a robust electronic surgical registry (ESR). This review of the first year's data from the ESR forms part of a situational analysis to assess the burden of trauma managed by the service and the quality of care delivered within the constraints of the available resources. METHODS: Formal ethical approval was obtained prior to design and development of this study, and appropriate commercial software was sourced. The exercise of data capture was integrated into the process of service delivery and was accomplished at the endpoint of patient care. 12 months after implementation of the registry, the data were extracted and audited. RESULTS: A total of 2,733 patients were admitted over the 12 month study period. The average patient age was 28.3 years. There were 2,255 (82.5 %) male patients and 478 (17.5 %) female patients. The average monthly admission rate was 228 patients, with a peak of 354 admissions over the December period. The mean injury severity score (ISS) was 12 [interquartile range (IQR) 6.7-23.2]. A quarter (24.8 %) of all new emergency admissions had an ISS > 15. The average duration of stay for patients was 5.12 days (IQR 2.3-13.2 days). Some 2,432 (92.1 %) patients survived, and 208 (7.9 %) died. A total of 333 (13 %) patients required admission to either the intensive care unit (ICU) or the high dependency unit. From the city mortuary data a further 362 deaths were identified. These included 290 deaths that occurred on scene and 72 that occurred within Pietermaritzburg hospitals other than Greys and Edendale. The total trauma-related mortality for the entire city in 2012 was 570 (51 % on-scene deaths and 49 % in-hospital deaths). Blunt trauma accounted for 62 % of deaths. CONCLUSIONS: The PMTS treats a significant volume and spectrum of trauma. Despite significant resource limitations, we have managed to implement a functional and sustainable trauma service across multiple hospitals. We believe the major resource deficits limiting our service could be ameliorated by the development of an additional trauma facility, adequately equipped with dedicated trauma operating slates and trauma ICU beds. The adoption of our current model of trauma care came out of a need to work within our resource constraints, and it differs from the traditional model. Within the aforementioned limits, our data suggest that this model of delivering care is feasible, practical, and successful. Considering the universal burden of trauma and the all-too-common imbalance between resource demand and supply among many health-care institutions, it is our hope that this report will contribute to the ongoing academic debate around the topic of optimal systems of providing global trauma care.

Evaluation of a nationally funded state-based programme to reduce fatal occupational injuries.

BACKGROUND: The Fatality Assessment and Control Evaluation (FACE) programme was established by the National Institute for Occupational Safety and Health to help prevent occupational traumatic fatalities by funding states to conduct targeted fatality investigations within cause-specific focus areas and associated prevention efforts. PURPOSE: To investigate the impact of the state-based FACE programme on two previous focus areas. METHODS: A longitudinal time-series analysis spanning 22 years compared state fatality rates for occupational falls and electrocutions before and after FACE programme funding with states not receiving FACE programme funding. Lag periods were utilised to allow time for the programme to have an effect, and rates were adjusted for a variety of covariates. Separate analyses were conducted for each injury outcome. RESULTS: A reduction in fall fatality rates that was of borderline significance (1-year lag adjRR=0.92 (0.84 to 1.00)) and a non-significant reduction in electrocution fatality rates (3-year lag adjRR=0.92 (0.82 to 1.03)) were observed in states with FACE programme funding, Best-fit models presented two separate lag periods. CONCLUSIONS: While it is challenging to quantitatively evaluate effectiveness of programmes such as FACE, the data suggest the FACE programme may be effective in preventing occupational injury deaths within its outcome focus areas throughout the state. It is important to look for ways to measure intermediate effects more precisely, as well as ways to maintain effects over time.

Circumstances of fatal lockout/tagout-related injuries in manufacturing.

BACKGROUND: Over the past few decades, hundreds of manufacturing workers have suffered fatal injuries while performing maintenance and servicing on machinery and equipment. Using lockout/tagout procedures could have prevented many of these deaths. METHODS: A narrative text analysis of OSHA accident investigation report summaries was conducted to describe the circumstances of lockout/tagout-related fatalities occurring in the US manufacturing industry from 1984 to 1997. RESULTS: The most common mechanisms of injury were being caught in or between parts of equipment, electrocution, and being struck by or against objects. Typical scenarios included cleaning a mixer or blender, cleaning a conveyor, and installing or disassembling electrical equipment. Lockout procedures were not even attempted in the majority (at least 58.8%) of fatal incidents reviewed. CONCLUSIONS: Lockout/tagout-related fatalities occur under a wide range of circumstances. Enhanced training and equipment designs that facilitate lockout and minimize worker contact with machine parts may prevent many lockout/tagout-related injuries.

[Danger of electricity in the bathtub]. / Gefahren durch Elektrizität im Badegewässer.

A fatal accident, when swimming in a lake, caused by a defective electric main is reported. The medical and technical findings of that accident are discussed as well as the electrophysical prerequisites.