Energy and enviro-economic analysis of a solar air heater with wedge turbulators.

Solar air heaters (SAH) convert solar energy to thermal energy for food processing industries and commercial space heating applications, as solar energy is cost-free. In this experimental study, the thermal performance of the solar air heater has been successively improved using different roughness elements over the absorber. The triangle-shaped wedges in three structures (inline, serpentine, and clustered structure) are investigated in this work. Thermal performance comparison is made with a SAH with a plain absorber. A maximum air temperature rise of 19 °C is observed for the SAH with wedges in a clustered structure. The absorber surface temperature for clustered structured roughness elements is 76.8 °C with an average heat loss coefficient of 4.43 W/m2·K. The useful heat absorption using clustered structure wedges is 33%, 17.9%, and 6.6% higher than the SAH with plain, inline, and serpentine structured wedges. SAH's maximum thermal and exergy efficiency with clustered structured elements is 70.4% and 1.64%. The average thermal efficiency of inline, serpentine, and clustered arrangement is 13.3%, 25.3%, and 35.6% higher than the SAH with a plain absorber. The proposed SAH design shows a sustainability index 1.01, and lower payback periods show economic and environmental viability.

Testing the effectiveness of household fuel conservation strategies: Policy implications for increasing the affordability of exclusive clean cooking.

BACKGROUND: Exclusive clean fuel use is essential for realizing health and other benefits but is often unaffordable. Decreasing household-level fuel needs could make exclusive clean fuel use more affordable, but there is a lack of knowledge on the amount of fuel savings that could be achieved through fuel conservation behaviors relevant to rural settings in low- and middle-income countries. METHODS: Within a trial in Peru, we trained a random half of intervention participants, who had previously received a liquefied petroleum gas (LPG) stove and were purchasing their own fuel, on fuel conservation strategies. We measured the amount of fuel and mega joules (MJ) of energy consumed by all participants, including control participants who were receiving free fuel from the trial. We administered surveys on fuel conservation behaviors and assigned a score based on the number of behaviors performed. RESULTS: Intervention participants with the training had a slightly higher conservation score than those without (7.2 vs. 6.6 points; p = 0.07). Across all participants, average daily energy consumption decreased by 9.5 MJ for each 1-point increase in conservation score (p < 0.001). Among households who used exclusively LPG (n = 99), each 1-point increase in conservation score was associated with a 0.04 kg decrease in LPG consumption per household per day (p = 0.03). Using pressure cookers and heating water in the sun decreased energy use, while using clay pots and forgetting to close stove knobs increased energy use. CONCLUSION: Our findings suggest that a household could save 1.16 kg of LPG per month for each additional fuel conservation behavior, for a maximum potential savings of 8.1 kg per month. Fuel conservation messaging could be integrated into national household energy policies to increase the affordability of exclusive clean fuel use, and subsequently achieve the environmental and health benefits that could accompany such a transition.

Public exposure to artificial optical radiation in the aesthetics and the entertainment sector in Greece. Risk management actions.

Safety issues are raised from the use of low- and high-power optical radiation sources, both laser and non-laser, by non-experts for aesthetic and entertainment purposes. The Greek Atomic Energy Commission relied on the ISO 31000:2018 framework to manage the public exposure risk to such cases. Risk was evaluated as (1) intolerable for lasers and intense pulsed light sources at aesthetic procedures and in the case of laser pointers, (2) severe for lasers at laser shows and (3) moderate for light-emitting diodes (LEDs) at aesthetic procedures, home-use intense pulsed light sources/LEDs and laser/LED projectors. Operators' training, public awareness campaigns, intensive market surveillance actions and the enhancement of the regulatory framework have been proposed as risk treatment/control measures and have been prioritised in this order, according to their effectiveness in reducing the exposure risk and their urgency of implementation. The Greek Atomic Energy Commission developed public awareness campaigns regarding exposure safety to laser and non-laser light sources at aesthetic procedures and the use of laser pointers.

Improved cookstoves to reduce household air pollution exposure in sub-Saharan Africa: A scoping review of intervention studies.

Household air pollution (HAP), primarily from biomass fuels used for cooking, is associated with adverse health outcomes and premature mortality. It affects almost half of the world's population, especially in low-income and low-resourced communities. However, many of the 'improved' biomass cookstoves (ICS) aimed at reducing HAP lack empirical evidence of pollutant reduction and reliability in the field. A scoping review guided by the Joanna Briggs Institute framework was systematically conducted to explore and analyse the characteristics of cookstoves to assess the ICS available to meet the socio-economic and health needs of households in sub-Sahara Africa (sSA). The review searched Scopus, PubMed, Web of Science, EMBASE, Global Health Database on OVID, BASE, and conducted a grey literature search from 2014 to 2022 for all field-based ICS studies. In addition, user perspectives were explored for cookstoves analysed as available, affordable, and effective in reducing harmful biomass emissions. The search returned 1984 records. Thirty-three references containing 23 ICS brands were included. The cookstoves were analysed into seven categories: (1) efficiency in HAP reduction, (2) availability, (3) affordability, (4) sustainability, (5) safety, (6) health outcomes, and (7) user experience. Most (86.9%) of the improved cookstoves showed a reduction in harmful emission levels compared to the traditional three-stone fire. However, the levels were higher than the WHO-recommended safe levels. Only nine were priced below 40 USD. Users placed emphasis on cookstoves' suitability for cooking, fuel and time savings, safety, and price. Equality in cooking-related gender roles and psychosocial benefits were also reported. The review demonstrated limited field testing, a lack of evidence of ICS emissions in real-life settings in sSA, heterogeneity in emission measurements, and incomplete descriptions of ICS and kitchen features. Gender differences in exposure and psychosocial benefits were also reported. The review recommends improved cookstove promotion alongside additional measures to reduce HAP at a cost affordable to low-resource households. Future research should focus on detailed reporting of study parameters to facilitate effective comparison of ICS performance in different social settings with different local foods and fuel types. Finally, a more community-based approach is needed to assess and ensure user voices are represented in HAP intervention studies, including designing the cookstoves.

Development and evaluation of deep learning algorithms for assessment of acute burns and the need for surgery.

Assessment of burn extent and depth are critical and require very specialized diagnosis. Automated image-based algorithms could assist in performing wound detection and classification. We aimed to develop two deep-learning algorithms that respectively identify burns, and classify whether they require surgery. An additional aim assessed the performances in different Fitzpatrick skin types. Annotated burn (n = 1105) and background (n = 536) images were collected. Using a commercially available platform for deep learning algorithms, two models were trained and validated on 70% of the images and tested on the remaining 30%. Accuracy was measured for each image using the percentage of wound area correctly identified and F1 scores for the wound identifier; and area under the receiver operating characteristic (AUC) curve, sensitivity, and specificity for the wound classifier. The wound identifier algorithm detected an average of 87.2% of the wound areas accurately in the test set. For the wound classifier algorithm, the AUC was 0.885. The wound identifier algorithm was more accurate in patients with darker skin types; the wound classifier was more accurate in patients with lighter skin types. To conclude, image-based algorithms can support the assessment of acute burns with relatively good accuracy although larger and different datasets are needed.

Assessment of solar e-cookers social acceptance in Gaza Strip.

This study aims to assess the social acceptance of using solar energy based cooking appliances in Gaza Strip. A study sample that consists of 2400 employees from three local universities in Gaza strip is targeted in study. Meanwhile, 347 participations have participated in the study. This gives the conclusions of the study a margin of error of 5% and a confidence level of 95%. Different attributes are used to measure the social acceptance of the respondents of solar energy cooking systems including knowledge of using solar cooking appliances, financial situation, educational level, age, career and gender. According to the results, 94.55% of the participants believe that the best usage of solar energy is for lighting. Meanwhile, only 37.7% of the participants have supported the usage of solar energy for cooking. It is also concluded that there are no statistical significant differences in using solar energy for cooking associated with gender and job status. Meanwhile, it is found that there is statistical significance of using solar energy for cooking associated with education and age. This shows a clear behavioral barrier for the usage of solar energy cooking systems in Gaza Strip. According to this research it is concluded that end-users with middle income put quality of life first before the technology cost (affordable costs). This conclusion is regardless the educational level of the respondents. Moreover, it is found that Funding schemes and loans are key issues in spreading the e-cooking. Finally it is concluded that noticed support of using solar energy in Gaza according to this research is directly associated with energy poverty status in Gaza. Meanwhile, the idea of using green alternative energy is very acceptable in Gaza but there is a clear lack of awareness of technologies aspects and characteristics.

Quantification and characterization of recovered materials in the cycle of the informal household electronic waste dismantling in Buriram province, Thailand: A challenge towards sustainable management and circular economy.

The numerous amount of electronic waste (e-waste) has not been managed effectively resulting informal dismantling sites are being expanded in Thailand. The government attempts to improve the efficiency of an integrated e-waste management system, but baseline data of e-waste stream in informal sectors are insufficient. This research aimed to investigate the inflow and outflow of the materials throughout the informal e-waste dismantling processes at the well-known second-largest community in Buriram province during 2017-2018. To describe the quantities of dismantled materials, a material flow analysis was performed. The overall amount of e-waste taken to the community was estimated to be in the range of 1593-12,943 tonnes year-1. Valuable materials could be recovered at more than 90% (by mass) from fans, refrigerators, washing machines, microwaves and air conditioners. The amount of e-waste residue that the local administrative organization had to handle was up to 1144 tonnes year-1. The quantitative data retrieved from this study could provide a satisfactory equation for estimating the amount of separated valuable and non-valuable materials. Recyclable materials from dismantling have an economic incentive, e-waste dismantlers in a small and large household group that can earn approximately 798 and 1262 USD month-1 income, respectively. The notable e-waste characterization and quantification of recovered materials would be useful for improving the potential circular flow of e-waste in Thailand.

Assessment of household air pollution exposure of tribal women.

There is a growing evidence that the burning of unprocessed biomass fuels is associated with adverse health impacts. This study estimated the gaseous pollutants (CO, CO2, O3, SO2, and NO2) and particulate matters (PM2.5 and PM10) during the burning of biomass and liquefied petroleum gas (LPG) fuels and their impacts on the health of tribal women. The results revealed that the tribal women mainly used six types of unprocessed biomass fuels (dry leaves, cow dung cake, dry woods, twigs, rice straw, and agricultural residues) along with five types of traditional earthen stoves. The concentration of gaseous and PM was recorded as in the order of CO2 > SO2 > CO > O3 and total suspended particulate matter (TSPM) > PM10 > PM2.5, respectively. The pollutant concentration inside the kitchen room for biomass users was significantly (p < 0.001) higher than LPG users. The biomass using tribal women might be suffering from higher cardiovascular risk than LPG users. The lung function study results also indicated that the mean values of forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC), and FEV1/FVC were lower among biomass users than LPG users. The correlation study shows that tribal women who were exposed to biomass smoke were in a more vulnerable position than those who used LPG. Moreover, the toxicological risk among tribal biomass users was observed high (3.52) compared to LPG users (0.39). On the other hand, the Monte Carlo probabilistic simulation model for uncertainty analysis revealed that the mean value of Hazard Quotient (HQ) for PM2.5 in kitchen room was observed as 4.31E-00 and 9.40E-01 for biomass and LPG users, respectively. Modelling study also revealed that exposure of duration and cooking time are extremely important for toxicological risk assessment. However, further long-term comprehensive studies are extremely important.

Interventions to mitigate indoor air pollution: A cost-benefit analysis.

Globally, around three billion people depend upon solid fuels such as firewood, dry animal dung, crop residues, or coal, and use traditional stoves for cooking and heating purposes. This solid fuel combustion causes indoor air pollution (IAP) and severely impairs health and the environment, especially in developing countries like Pakistan. A number of alternative household energy strategies can be adopted to mitigate IAP, such as using liquefied petroleum gas (LPG), natural gas, biogas, electric stoves, or improved cook stoves (ICS). In this study, we estimate the benefit-cost ratios and net present value of these interventions over a ten-year period in Pakistan. Annual costs include both fixed and operating costs, whereas benefits cover health, productivity gains, time savings, and fuel savings. We find that LPG has the highest benefit-cost ratio, followed by natural gas, while ICS has the lowest benefit-cost ratio. Electric stoves and biogas have moderate benefit-cost ratios that nevertheless exceed one. To maximize the return on cleaner burning technology, the government of Pakistan should consider encouraging the adoption of LPG, piped natural gas, and electric stoves as means to reduce IAP and adopt clean technologies.

Co-benefits of Energy-Efficient Air Conditioners in the Residential Building Sector of China.

Electricity demand for room air conditioners (ACs) has been growing significantly in China in response to rapid economic development and mounting impacts of climate change. In this study, we use the bottom-up model approach to predict the penetration rate of room ACs in the residential building sector of China at the provincial level, with the consideration of the urban-rural heterogeneity. In addition, we assess co-benefits associated with enhanced energy efficiency improvement of AC systems and the adoption of low-global-warming-potential (low-GWP) refrigerants in AC systems. The results indicate that the stock of room ACs in China grows from 568 million units in 2015 to 997 million units in 2030 and 1.1 billion units in 2050. The annual electricity saving from switching to more efficient ACs using low-GWP refrigerants is estimated at almost 1000 TWh in 2050 when taking account of the full technical energy efficiency potential. This is equivalent to approximately 4% of the expected total energy consumption in the Chinese building sector in 2050 or the avoidance of 284 new coal-fired power plants of 500 MW each. The cumulative CO2eq mitigation associated with both the electricity savings and the substitution of high-GWP refrigerants makes up 2.6% of total business-as-usual CO2eq emissions in China over the period 2020 to 2050. The transition toward the uptake of low-GWP refrigerants is as vital as the energy efficiency improvement of new room ACs, which can help and accelerate the ultimate goal of building a low-carbon society in China.

Health effects of household air pollution related to biomass cook stoves in resource limited countries and its mitigation by improved cookstoves.

BACKGROUND: Household air pollution (HAP) related to cooking is associated with significant global morbidity and mortality. An estimated three billion people worldwide are exposed to cooking related HAP caused by solid fuel combustion. This exposure is highest for the vulnerable population of women and children resulting in significant cumulative health effects. METHODS: A literature review was conducted for health effects of household air pollution related to biomass cookstoves in resource limited countries and to evaluate the effect of improved cookstoves on these health effects. We searched PubMed, Embase and Cochrane Library. We conducted searches in January 2018 with a repeat in February 2020. We included only studies conducted in resource limited countries, published in English, irrespective of publication year and studies that examined the health effects of HAP and/or studied the effects of improved cookstove (IC). Two authors independently screened journal article titles, abstracts and full-text articles to identify those that included the following search term: biomass cookstoves and health risks. We also assessed the limitations of IC with barriers to their uptake. RESULTS: Health effects associated with HAP mostly include increased blood pressure (BP), dyspnea, childhood pneumonia, lung cancer, low birthweight and cardiovascular diseases. Being a global problem with divergent environmental factors including wide variety of fuel used, housing condition, foods prepared, climatic condition and social factors; most solutions though efficient seems inadequate. Improved cookstove (IC) mitigates emissions and improves short term health, though few randomized long-term studies could substantiate its long-standing continuance and health benefits. CONCLUSION: There is ample data about the health effects of HAP, with some benefit with IC intervention for elevated blood pressure, dyspnea symptoms, mutagenicity and cardiovascular diseases. IC does not have any benefit in pregnancy outcomes or children health.

Assessment of clean cooking technologies under different fuel use conditions in rural areas of Northern India.

The study was conducted to assess the performance of improved and traditional cookstoves using wood as a fuel and three combinations of other fuel mixes - (i) wood and cow dung, (ii) wood and mustard stalks, and (iii) cow dung and mustard stalks). Energy and emission parameters such as specific energy consumption (SEC), emission factors (EFs) of carbon monoxide (CO), particulate matter (PM) and black carbon (BC) were used to compare four different types of cookstoves. These included top-feed forced draft (TF-FD), top-feed natural draft (TF-ND), front-feed natural draft (FF-ND) and front-feed traditional (FF-TR) cookstoves. Controlled cooking test (CCT) was used as the test protocol. The results showed the performance of improved cookstove technologies can vary based on the fuel used for cooking. It was observed that emission factors for PM and CO increased by 67-96% and 45-90% respectively when all three improved cookstoves were tested with three fuel combinations against wood as cooking fuel. Among the tested cookstoves, a marked difference was observed between performance of forced draft and natural draft cookstoves. Forced draft cookstoves emitted higher amount of all pollutant emissions compared to natural draft cookstoves when used with mustard stalks in combination with either wood or cowdung. The results are of critical importance given that forced draft cookstoves have been promoted in geographical regions where fuel mix use is prevalent. Therefore, forced draft cookstove might not be the right choice when the goal is climate mitigation and reduction in impact on human health. It is imperative to study comprehensively the influence of various field variables on performance of cookstoves, which have severe implications on the performance of cookstoves.

Basic social resource needs screening in the gynecologic oncology clinic: a quality improvement initiative.

BACKGROUND: Social determinants of health are known to contribute to disparities in health outcomes. Routine screening for basic social needs is not a part of standard care; however, the association of those needs with increased healthcare utilization and poor compliance with guideline-directed care is well established. OBJECTIVE: In this study, we aimed to assess the prevalence of basic social resource needs identified through a quality improvement initiative in a gynecologic oncology outpatient clinic. In addition, we aimed to identify clinical and demographic factors associated with having basic social resource needs. STUDY DESIGN: We performed a prospective cohort study of women presenting to a gynecologic oncology clinic at an urban academic institution who were screened for basic social resource needs as part of a quality improvement initiative from July 2017 to May 2018. The following 8 domains of resource needs were assessed: food insecurity, housing insecurity, utility needs, financial strain, transportation, childcare, household items, and difficulty reading hospital materials. Women with needs were referred to resources to address those needs. Demographic and clinical information were collected for each patient. The prevalence of needs and successful follow-up interventions were calculated. Patient factors independently associated with having at least 1 basic social resource need were identified using multivariable Poisson regression. RESULTS: A total of 752 women were screened in the study period, of whom 274 (36%) reported 1 or more basic social resource need, with a median of 1 (range, 1-7) need. Financial strain was the most commonly reported need (171 of 752, 23%), followed by transportation (119 of 752, 16%), difficulty reading hospital materials (54 of 752, 7%), housing insecurity (31 of 752, 4%), food insecurity (28 of 752, 4%), household items (22 of 752, 3%), childcare (15 of 752, 2%), and utility needs (13 of 752, 2%). On multivariable analysis, independent factors associated with having at least 1 basic social resource need were being single, divorced or widowed, nonwhite race, current smoker, nonprivate insurance, and a history of anxiety or depression. A total of 36 of 274 (13%) women who screened positive requested assistance and were referred to resources to address those needs. Of the 36 women, 25 (69%) successfully accessed a resource or felt equipped to address their needs, 9 (25%) could not be reached despite repeated attempts, and 2 (6%) declined assistance. CONCLUSION: Basic social resource needs are prevalent in women presenting to an urban academic gynecologic oncology clinic and can be identified and addressed through routine screening. To help mitigate ongoing disparities in this population, screening for and addressing basic social resource needs should be incorporated into routine comprehensive care in gynecologic oncology clinics.

Assessment of LED lamps components and materials for a recycling perspective.

LED lamps have already conquered the market of general lighting. This new product will generate a substantial flow of e-waste requiring studies for the correct management, especially concerning recycling alternatives. This study proposes a material characterization of all the tubular and bulb LED lamp components (carcass, LEDs, printed circuit board and LED module). After manual disassembling, polymers were characterized by infrared spectroscopy (FTIR), and the metals by X-ray fluorescence (XRF) and acid leaching followed by ICP-OES analysis. By the novelty of separating and characterizing the LED lamp's components, a process which has not yet been studied, the results allow for a better interpretation of the different materials distribution within the lamps which is essential to improve the efficiency of a recycling route. To exemplify, the element gallium, which has a recycling appeal from the LEDs, is present in a larger quantity in the printed circuit boards. The study also provides an analysis of the materials recycling rates and economic values, and the comparison with the concentration of natural ores. Thus, it was possible to discuss about target components and materials and the recycling alternatives for each component. LED lamps contain interesting materials, with even higher concentrations than natural ores, such as gold, silver, copper, aluminum, tin and gallium. If recycled, tubular lamps and bulb lamps would have the economic recovery of USD 2405.99 and USD 2595.02 per ton, respectively. The gold was found to be the most valuable material, and the LEDs the most valuable component of the LED lamps.

Willingness-to-pay for long-lasting insecticide-treated bed nets: a discrete choice experiment with real payment in Ghana.

BACKGROUND: Expanding access to long-lasting insecticidal nets (LLINs) is difficult if one is limited to government and donor financial resources. Private commercial markets could play a larger role in the continuous distribution of LLINs by offering differentiated LLINs to middle-class Ghanaians. This population segment has disposable income and may be willing to pay for LLINs that meet their preferences. Measuring the willingness-to-pay (WTP) for LLINs with specialty features that appeal to middle-class Ghanaians could help malaria control programmes understand what is the potential for private markets to work alongside fully subsidized LLIN distribution channels to assist in spreading this commodity. METHODS: This study conducted a discrete choice experiment (DCE) including a real payment choice among a representative sample of 628 middle-income households living in Ashanti, Greater Accra, and Western regions in Ghana. The DCE presented 18 paired combinations of LLIN features and various prices. Respondents indicated which LLIN of each pair they preferred and whether they would purchase it. To validate stated willingness-to-pay, each participant was given a cash payment of $14.30 (GHS 65) that they could either keep or immediately spend on one of the LLIN products. RESULTS: The households' average probability of purchasing a LLIN with specialty features was 43.8% (S.D. 0.07) and WTP was $7.48 (GHS34.0). The preferred LLIN features were conical or rectangular one-point-hang shape, queen size, and zipper entry. The average WTP for a LLIN with all the preferred features was $18.48 (GHS 84). In a scenario with the private LLIN market, the public sector outlay could be reduced by 39% and private LLIN sales would generate $8.1 million ($311 per every 100 households) in revenue in the study area that would support jobs for Ghanaian retailers, distributors, and importers of LLINs. CONCLUSION: Results support a scenario in which commercial markets for LLINs could play a significant role in improving access to LLINs for middle-income Ghanaians. Manufacturers interested could offer LLIN designs with features that are most highly valued among middle-income households in Ghana and maintain a retail price that could yield sufficient economic returns.

Paraffin dangers, health and socioeconomic consequences: Urgent need for policy action.

Illuminating paraffin (kerosene) is the primary cooking fuel for approximately two million South Africans. The highly flammable and toxic fuel is burnt in poorly made stoves that are prone to malfunction and are associated with accidental fires, burns and household air pollution. However, the fuel continues to be used as it is easily decanted, widely available in neighbourhood outlets, perceived as affordable, and often the only available option for low-income urban settlements. It is anticipated that increased and enforced home congestion during COVID-19 lockdowns will exacerbate exposure of homebound families to unsafe energy, especially during the cold winter months. Based on an accumulation of evidence on the health and socioeconomic impacts of paraffin, this article advocates for its expedited phase-out and substitution with safer energy.

Household biogas digesters or medium-large-scale biogas plants: a conflicting issue in rural China.

There has been a conflicting issue in rural China that whether or not encouraging the development of medium-large-scale biogas plants (MLBPs) to reduce household biogas digesters (HBDs) will be better for China in the long run. In this study, we investigate the difference between HBD users and MLBP users and the factors that affect the biogas use of these two user types on the basis of a survey of 1125 households in four provinces in China. The results indicate that compared to HBD users, MLBP users have a higher ratio (29%) of biogas use, obtain a higher subsidy-to-cost ratio (25%), and present a more positive evaluation of biogas service (3%). For HBD users, installation years and service evaluation are significant predictors of biogas use. For MLBP users, in addition to installation years and service, the subsidy-to-cost ratio affects biogas use negatively, and the biogas price is a key constraint for biogas use. These results provide valuable insights into the future development of biogas energy in rural China and guidance for the development of biogas in similar countries worldwide.

A usability assessment of riding lawn-mowing equipment with varying levels of design standards compliance.

The use of riding lawn equipment (RLE) is related to a significant number of accidents every year. To provide basis for product design and enhance user performance and safety, a usability and performance assessment of modern riding lawn-mowing tractor designs and features was conducted in a real-world test environment. Five current commercially available RLEs were tested with response measures including task performance time and accuracy, physiological workload, system usability scores (SUS), and subjective rankings of RLE models. This data was used to identify sensitivity of responses to variations in RLE design features and functionality. The data was also used to assess the validity of new tractor design standard conformance tool, the RLEval methodology. This tool made comprehensive evaluation of RLE models compliance with over 70 specific design standards and was applied by human factors experts. Experiment results revealed sensitivity of all response measures to design differences among the five RLE models, except the objective workload measures. Response measures including task performance, SUSs and subjective rankings showed partial agreement with the RLEval scores. In general, the study results demonstrated a comprehensive experimental methodology for usability and performance evaluations of RLEs as well as merit of using the RLEval as preliminary method to compare design features. Some aspects of the usability experimentation and the RLEval method appear to be complementary.

Different sources of rural household energy consumption and influencing factors in Dazu, China.

Rural household energy consumption is an important component of national energy consumption. This paper explores the rural household energy consumption status and influencing factors on different sources of rural household energy consumption in western China. Using data from a survey of 240 households conducted in 2017, this study finds that rural households' energy consumption structure in the study area is a combination of traditional biomass energy and commercial energy sources. Fuelwood is the most commonly used fuel in the study area, while modern energy sources only occupy a low proportion. Rural household energy consumption is influenced by various factors. Individual perceptions of climate change, social trust and networks, and households' socio-economic and demographic factors (gender, age, education, income per capita, household size, household location, and number of household appliances) are identified as having significant effects on rural households' consumption of biomass and commercial energies. The research results provide implications for policy makers to formulate related rural energy policies to improve the rural energy consumption structure and future energy policy design in China and other developing countries.

Evidences of copper nanoparticle exposure in indoor environments: Long-term assessment, high-resolution field emission scanning electron microscopy evaluation, in silico respiratory dosimetry study and possible health implications.

A variety of appliances operated by brush electric motors, widely used in indoor environments, emit nanoparticles (NPs). Due to electric arc discharge during the operation of such motors, some NPs contain copper (Cu). Their dimensions are the same of those found in brain tissue samples by other authors who speculated their possible translocation to brain through olfactory bulb. Cu has been reported to play an important role in the etiopathogenesis of Alzheimer's disease. Thus, the present study was performed to 1. estimate by means of Multiple-Path Particle Dosimetry model the doses of NPs released by electric appliances that can potentially deposit on the olfactory bulb; 2. investigate the morphology and the composition of particles emitted by some electric appliances daily used in indoor environments; 3. monitor for a long time period the Cu contamination of indoor environments due to this kind of appliances. About 106-107 NPs deposit on the olfactory bulb during the operation (1.5-6 min) of such appliances, with a major contribution due to 10-20 nm NPs. HR-FESEM characterization confirmed the presence of such NPs, that were observed both as individual particles (20-40 nm) and aggregated to form particles in the µm sizes range. XEDS microanalysis revealed the presence of Cu together with other elements. Relevant daily contamination of indoor environments due to these appliances has been confirmed by monitoring throughout a year the Cu content of PM10 samples collected both indoor and outdoor private dwellings. Cu was present in great part as an insoluble form. This means that, following protracted exposure, Cu NPs of such origin may undergo tissue accumulation. This is cause of concern because general population is chronically exposed to such Cu nanoparticles in indoor environments and in view of the role assigned to Cu in the development of neurological disorders.