Risk assessment of Benzene, Toluene, Ethyl benzene, and Xylene (BTEX) in the atmospheric air around the world: A review.

Volatile organic compounds, such as BTEX, have been the subject of numerous debates due to their detrimental effects on the environment and human health. Human beings have had a significant role in the emergence of this situation. Even though US EPA, WHO, and other health-related organizations have set standard limits as unhazardous levels, it has been observed that within or even below these limits, constant exposure to these toxic chemicals results in negative consequences as well. According to these facts, various studies have been carried out all over the world - 160 of which are collected within this review article, so that experts and governors may come up with effective solutions to manage and control these toxic chemicals. The outcome of this study will serve the society to evaluate and handle the risks of being exposed to BTEX. In this review article, the attempt was to collect the most accessible studies relevant to risk assessment of BTEX in the atmosphere, and for the article to contain least bias, it was reviewed and re-evaluated by all authors, who are from different institutions and backgrounds, so that the insights of the article remain unbiased. There may be some limitations to consistency or precision in some points due to the original sources, however the attempt was to minimize them as much as possible.

Occurrence of BTX and PAHs in underground drinking water of coking contaminated sites: Linkage with altitude and health risk assessment by boiling-modified models.

The safety of underground drinking water has received widespread attention. However, few studies have focused on the occurrence and health risks of pollutants in underground drinking water of coking contaminated sites. In this study, the distribution characteristics, sources, and human health risks of benzene, toluene, xylene (BTX) and polycyclic aromatic hydrocarbons (PAHs) in underground drinking water from a typical coking contaminated site in Shanxi of China were investigated. The average concentrations of BTX and PAHs in coking plant (CP) were 5.1 and 4.8 times higher than those in residential area (RA), respectively. Toluene and Benzene were the main BTX, while Acenaphthene, Fluorene, and Pyrene were the main PAHs. Concentrations of BTX/PAHs were negatively correlated with altitude, revealing altitude might be an important geological factor influencing spatial distribution of BTX/PAHs. PMF model demonstrated that the BTX/PAHs pollution in RA mainly originated from coking industrial activities. Health risk assessments were conducted by a modified US EPA-based model, in which environmental concentrations were replaced by residual concentrations after boiling. Residual ratios of different BTX/PAHs were determined by boiling experiments to be 9.4-93.8 %. The average total carcinogenic risks after boiling were decreased from 2.6 × 10-6 to 1.4 × 10-6 for adults, and from 4.3 × 10-6 to 2.1 × 10-6 for children, suggesting boiling was an effective strategy to reduce the carcinogenic risks from BTX/PAHs, especially for ingestion pathway. Monte Carlo simulation results matched well with the calculated results, suggesting the uncertainty was acceptable and the risk assessment results were reliable. This study provided useful information for revealing the spatial distribution of BTX/PAHs in underground drinking water of coking contaminated sites, understanding their linkage with altitude, and also helped to more accurately evaluate the health risks by using the newly established boiling-modified models.

Health risk assessment of exposure to benzene, toluene, ethyl benzene, and xylene in shoe industry-related workplaces.

Benzene, toluene, ethyl benzene, and xylene (BTEX) are prevalent pollutants in shoe industry-related workplaces. The aim of this study was to assess exposure to BTEX and their carcinogenic and non-carcinogenic risks in shoe-industry-related workplaces. This study was carried out at different shoe manufactures, small shoe workshop units, shoe markets, and shoe stores in Tabriz, Iran in 2021. Personal inhalation exposure to BTEX was measured using the National Institute for Occupational Safety and Health (NIOSH) 1501 method. Carcinogenic and non-carcinogenic risks due to inhalation exposure to BTEX were estimated by United States Environmental Protection Agency (U.S. EPA) method based on Mont Carlo simulation. Results showed that the concentrations of benzene and toluene were higher than the threshold limit value (TLV) in both gluing and non-gluing units of shoe manufactures. The total carcinogenic risk (TCR) due to exposure to benzene and ethyl benzene was considerable in all shoe industry-related workplaces. Also, the hazard index (HI) as a non-carcinogenic index was higher than standard levels in all shoe industry-related workplaces. Therefore, shoe industry-related workers are at cancer and non-cancer risks due to exposure to BTEX. Prevention measures need to be implemented to reduce the concentration of BTEX in shoe industry-related workplaces.

Human Health Risk Assessment of the Photocatalytic Oxidation of BTEX over TiO2/Volcanic Glass.

This study demonstrates rapid photocatalytic oxidation of a benzene, toluene, ethylbenzene, and xylene (BTEX) mixture over TiO2/volcanic glass. The assessment of the photocatalytic oxidation of BTEX was conducted under conditions simulating those found in indoor environments affected by aromatic hydrocarbon release. We show, under UV-A intensities of 15 mW/cm2 and an air flow rate of 55 m3/h, that low ppmv levels of BTEX concentrations can be reduced to below detectable levels. Solid-phase microextraction technique was employed to monitor the levels of BTEX in the test chamber throughout the photocatalytic oxidation, lasting approximately 21 h. Destruction of BTEX from the gas phase was observed in the following sequence: o-xylene, ethylbenzene, toluene, and benzene. This study identified sequential degradation of BTEX, in combination with the stringent regulatory level set for benzene, resulted in the air quality hazard indexes (Total Hazard Index and Hazard Quotient) remaining relatively high during the process of photocatalytic oxidation. In the practical application of photocatalytic purification, it is crucial to account for the slower oxidation kinetics of benzene. This is of particular importance due to not only its extremely low exposure limits, but also due to the classification of benzene as a Group 1 carcinogenic compound by the International Agency for Research on Cancer (IARC). Our study underscores the importance of taking regulatory considerations into account when using photocatalytic purification technology.

BTEX in indoor air of barbershops and beauty salons: Characterization, source apportionment and health risk assessment.

BACKGROUND: Volatile organic compounds, mainly BTEX, are among the pollutants of concern in beauty salons and barbershops that threaten both staff personnel and clients' health. This study aimed to determine the concentration of BTEX in barbershops and beauty salons and assess the carcinogenic and non-carcinogenic risks based on the actual risk coefficients. Also, possible sources of BTEX were determined. METHOD: Samples were collected by passive sampling. Quantitative and qualitative measurements of BTEX compounds were performed using gas chromatography-mass spectrometry (GC-MASS). Subsequently, the health risks were assessed according to the US Environmental Protection Agency. SPSS24 software and positive matrix factorization (PMF) analysis were used for statistical analysis and source apportionment respectively. RESULTS: Toluene is the most abundant compound in beauty salons, with a maximum concentration of 219.4 (µg/m3) in beauty salons. Results indicated that the mean ELCR value estimated for benzene regarding female staff exposure (1.04 × 10-5) was higher than that for men (4.05 × 10-6). Also, ELCR values of ethylbenzene for staff exposure were 2.08 × 10-6 and 3.8 × 10-6 for men and women, respectively, and possess possible carcinogenesis risks. CONCLUSION: Use of solvents and cosmetic products, improper heating systems, and type of service are the sources that probably contribute to BTEX emissions in beauty salons. It is necessary to follow health guidelines and conduct continuous monitoring for their implementation, in addition to setting a mandated occupational regulation framework or air quality requirements, to improve the health conditions in beauty salons.

Synthesis and application of quaternary amine-functionalized core-shell-shell magnetic polymers for determination of metabolites of benzene, toluene and xylene in human urine samples and study of exposure assessment.

As production processes have evolved, airborne concentrations of benzene, toluene and xylene in many workplaces are already well below the occupational exposure limits. However, studies have shown that low levels of exposure to benzene, toluene and xylene can still cause health effects in people exposed occupationally. However, there is no literature on health risk assessment of internal exposure. In view of this, an analytical method based on quaternary amine-functionalized core-shell-shell magnetic polymers (QA-CSS-MPs) was developed for the determination of seven metabolites in urine by MSPE-UPLC-DAD-HRMS. Furthermore, an improved QuEChERS method for the extraction of seven metabolites from human urine samples was introduced for the first time and satisfactory extraction rates were achieved. In addition, QA-CSS-MPs microspheres with core-shell-shell structure were designed and synthesized, and the morphology, composition and magnetic properties of the materials were fully characterized to verify the rationality of the synthetic route. Subsequently, QA-CSS-MPs microspheres were used as magnetic solid-phase extraction (MSPE) adsorbents for the purification of urine extracts, and UPLC-DAD-HRMS was used for the detection of seven metabolites. As a result, this method allows the accurate determination of seven metabolites in urine samples over an ultra-wide concentration range (0.001-100 mg/L). Under optimal experimental conditions, i.e., 2% hydrochloric acid in urine for the hydrolysis and 20 mg of QA-CSS-MPs for 5 min purification, the spiked recoveries of the seven target metabolites ranged from 81.5% to 117.7% with RSDs of 1.0%-9.4%. The limits of detection (LODs, S/N≥3) for the established method were in the range of 0.2-0.3 µg/L. The developed method was applied to 254 human urine samples for the determination of seven metabolites. The results showed that the concentration distributions of three xylene metabolites in urine, 2-MHA, 3-MHA, 4-MHA and total MHA, showed statistically significant differences for occupational exposure (p<0.001). In addition, the results of the internal exposure assessment showed that there is a high potential health risk associated with occupational exposure processes.

BTEX in Ambient Air of Zarand, the Industrial City in Southeast of Iran: Concentration, Spatio-temporal Variation and Health Risk Assessment.

The existence of several industries in Zarand, a city in Southeastern Iran, caused challenges for the residents about air pollutants and associated health effects. In the present study, the concentration of benzene, toluene, ethylbenzene, and xylene (BTEX), spatio-temporal distribution and related health risks were evaluated. Passive samplers were used to collect 30 samples in the over the hot and cold periods in 2020. The ordinary Kriging method was used to predict the spatio-temporal distribution of BTEXs. Also, the Monte Carlo simulation was used to evaluate the related carcinogenic and non-carcinogenic risks of BTEX for adults. The ranking of mean concentration of overall toluene, xylene, ethylbenzene, and benzene followed as 82.49 ± 26.86, 30.91 ± 14.04, 4.75 ± 3.28, and 0.91 ± 0.18 µg/m3, respectively. The mean value of lifetime carcinogenic risk (LTCR) for residents related to benzene was 7.52 × 10- 6, indicating a negligible carcinogenic risk for them. Furthermore, the ranking of non-carcinogenic risk calculated through hazard quotient (HQ) for investigated BTEX compounds followed as xylene > benzene > toluene > ethylbenzene over the hot period and xylene > toluene > ethylbenzene over the cold period which all points had HQ < 1. Additionally, according to the findings of the sensitivity analysis, the concentration of benzene was the main contributor in increasing the carcinogenic risk. According to our results, it can be stated that the existence of several industries in the study area could not possibly occur the significant carcinogenic and non-carcinogenic risks to the adults residents in the study period. Human studies are recommended to determine definite results.

Risk assessment of sediment PAH, BTEX, and emerging contaminants in Chanomi Creek Niger Delta, Nigeria.

This study assessed the levels of polycyclic aromatic hydrocarbons (PAHs), benzene, toluene, ethylbenzene, and xylene (BTEX), and emerging contaminants in Chanomi Creek. Sediment samples were collected between March 2019 and July 2020 to evaluate the concentrations of PAH, BTEX, and emerging contaminants using GC-MS and GC-FID with Headspace extraction. Results indicated mean PAH concentrations were 22.691 ± 15.09 µg/kg. The highest individual PAH concentrations were fluorene (7.085 µg/kg), naphthalene (4.517 µg/kg), and phenanthrene (3.081 µg/kg). Carbazole (0.828 µg/kg) was discovered as a novel environmental toxin with dioxin-like toxicity and widespread prevalence in sediments. The most common congener (25%) was ethylbenzene, followed by toluene and ortho- and meta-xylene (21%) and benzene (13%). The analysis of diagnostic ratios revealed that the main factors responsible for the presence of PAHs in the study area are the residential use of firewood, emissions from industrial activities, bush burning, and petroleum slicks. The risk assessment indicated that most PAHs exceeded the permissible risk quotient values, suggesting a moderate to high ecological risk. However, cutaneous exposure to PAHs and BTEX was found to have minimal impact on human health, with no significant hazards identified in adults and children. Nevertheless, the study revealed low cancer risks associated with PAH and BTEX compounds for both age groups. The continued discharge of PAHs and BTEX compounds into Chanomi Creek could have significant long-term negative effects on human and aquatic health. Thus, contamination risk awareness programs and the development of stringent contextual thresholds for identified contaminants could enhance environmental and public health protection.

Summer and winter variations of BTEX concentrations in an oil refinery complex and health risk assessment based on Monte-Carlo simulations.

The summer and winter concentrations of BTEX pollutants were investigated in various workplaces of an oil Refinery, Iran. In total 252 air samples from the breathing zones of the following employees were collected: supervisors, safetymen, repairmen, site men, and all workers. Carcinogenic and non-carcinogenic risk values were calculated based on the USEPA methodology using Monte Carlo simulations. BTEX concentrations were higher in the summer than in the winter season for all workstations, especially for toluene and ethylbenzene. The mean values of exposure to benzene for repairmen and site men were higher than threshold limit value of 1.60 mg/m3 for both seasons. Non-carcinogenic risk (HQ) values calculated for summer season for benzene, ethylbenzene, and xylene in all workstations, as well as for toluene for repairmen and site men exceeded acceptable level of 1. In winter season the mean HQ values for benzene and xylene in all workstations, for toluene for repairmen and site men, and for ethylbenzene for supervisors, repairmen, and site men were also > 1. For all workstations definite carcinogenic risk was indicated as calculated LCR values for benzene and ethylbenzene exposure were higher than 1 × 10-4 in both summer and winter seasons.

Evaluation of different composting systems on an industrial scale as a contribution to the circular economy and its impact on human health.

Due to the production of volatile organic compounds (VOCs), large-scale composting can cause air pollution and occupational health issues. Due to this, it is necessary to determine if the amount generated poses a health risk to plant workers, which can be a starting point for those in charge of composting plant facilities. As a result, the goal of this work is to conduct a thorough analysis of both the physicochemical features and the VOC generation of three large-scale systems. For ten weeks, the three different composting plants were monitored weekly, and VOC identification and quantification were performed using GC-MS gas chromatography. It has been observed that the biggest risk related with VOC formation occurs between the fourth and fifth weeks, when microbial activity is at its peak. Similarly, it has been demonstrated that xylenes and toluene are the ones that are produced in the greatest quantity. Finally, after ten weeks of processing, it was discovered that the material obtained complies with the regulations for the sale of an amendment.Implications: The evaluation and monitoring of the composting processes at an industrial scale is very important, due to the implications they bring. VOCs are produced by the operation of composting facilities with substantial amounts of solid waste, such as the companies in this study. These may pose a health risk to those working in the plants; thus, it is critical to understand where the VOCs occur in the process in order to maintain workers' occupational health measures. This form of evaluation is rare or nonexistent in Colombia, which is why conducting this type of study is critical, as it will provide crucial input into determining when the highest levels of VOC generation occur. These are the ones that may pose a risk at some point, but with proper occupational safety planning, said risk may be avoided. This work has evaluated three composting systems, with different types of waste and mixtures. According to reports, while composting systems continue to produce VOCs and their generation is unavoidable, the potential risk exists only within the plant. These findings can pave the way for the implementation of public policies that will improve the design and operation of composting plants. There is no specific legislation in Colombia for the design and execution of this sort of technology, which allows the use of organic waste.

Ecological risk assessment for xylenes and propylbenzenes in aquatic environment using a species sensitivity distribution approach.

Xylenes and propylbenzenes (PBZs) are volatile aromatic hydrocarbons with high aquatic toxicity. Xylenes can be present in three isomers: o-xylene (OX), m-xylene (MX), and p-xylene (PX), while PBZs include two isomers: n-propylbenzene (n-PBZ) and isopropylbenzene (i-PBZ). Their accidental spills and improper discharges from petrochemical industries can cause severe contamination in water bodies posing potential ecological risks. In this study, the published acute toxicity data of these chemicals for aquatic species were collected to calculate hazardous concentrations protecting 95% species (HC5) using a species sensitivity distribution (SSD) approach. The acute HC5 values for OX, MX, PX, n-PBZ, and i-PBZ were estimated to be 1.73, 3.05, 1.23, 1.22, and 1.46 mg/L, respectively. The risk quotient (RQ) values calculated based on HC5 indicated their high risk (RQ: 1.23 ∼ 21.89) in groundwater, but low risk (RQ < 0.1) in natural seawater, river water, and lake water. When xylenes or PBZs leaked into the sea, they were expected to pose a high risk (RQ > 1) at the start and then a low risk (RQ < 0.1) after 10 days due to natural attenuation. These results may help to derive more reliable protection thresholds for xylenes and PBZs in aquatic environment and provide a basis for evaluating their ecological risks.

Global distribution and ecological risk assessment of synthetic musks in the environment.

Synthetic musks, as an alternative product of natural musks, are widely used in almost all fragrances of consumer products, such as perfumes, cosmetics and detergents. During the past few decades, the production of synthetic musks has been increasing year by year, subsequently followed by large concern about their adverse effects on ecosystems and human beings. Until now, several studies have reviewed the latest development of analytical methods of synthetic musks in biological samples and cosmetics products, while there is still lack of a systematic analysis of their global distribution in different environmental media. Thus, this review summarizes the occurrence of synthetic musks in the environment including biota around the world and explores their global distribution patterns. The results show that galaxolide (HHCB), tonalide (AHTN), musk xylene (MX) and musk ketone (MK) are generally the most frequently detected synthetic musks in different samples with HHCB and AHTN being predominant. Higher concentrations of HHCB and AHTN are normally found in western countries compared to Asian countries, indicating more consumptions of these musks in western countries. The persistence, bioaccumulation and toxicity (PBT) of synthetic musks (mainly for polycyclic musks and nitro musks) are also discussed. The risk quotients (RQs) of HHCB, AHTN, MX and MK in most waters and sediments are below 0.1, reflecting a low risk to aqueous and sediment-dwelling species. In some sites, e.g., close to STPs, high risks (RQs>1) are characterized. Currently, limited data are available for macrocyclic musks and alicyclic musks in terms of either occurrence or PBT properties. More studies with an expanded scope of chemical type, geographical distribution and (synergic) toxicological effects especially from a long-term point of view are needed.

Assessment of health risk and burden of disease induced by exposure to benzene, toluene, ethylbenzene, and xylene in the outdoor air in Tehran, Iran.

The health risk and burden of disease induced by exposure to benzene, toluene, ethylbenzene, and xylene (BTEX) in the outdoor air in Tehran, 2019 were assessed based on the data of five fixed stations with weekly BTEX measurements. The non-carcinogenic risk, carcinogenic risk, and disease burden from exposure to BTEX compounds were determined by hazard index (HI), incremental lifetime cancer risk (ILCR), and disability-adjusted life year (DALY), respectively. The average annual concentrations of benzene, toluene, ethylbenzene, and xylene in the outdoor air in Tehran were 6.59, 21.62, 4.68, and 20.88 µg/m3, respectively. The lowest seasonal BTEX concentrations were observed in spring and the highest ones occurred in summer. The HI values of BTEX in the outdoor air in Tehran by district ranged from 0.34 to 0.58 (less than one). The average ILCR values of benzene and ethylbenzene were 5.37 × 10-5 and 1.23 × 10-5, respectively (in the range of probable increased cancer risk). The DALYs, death, DALY rate (per 100,000 people) and death rate (per 100,000 people) induced by BTEX exposure in the outdoor air in Tehran were determined to be 180.21, 3.51, 2.07, and 0.04, respectively. The five highest attributable DALY rates in Tehran by district were observed in the districts 10 (2.60), 11 (2.43), 17 (2.41), 20 (2.32), and 9 (2.32), respectively. The corrective measures such as controlling road traffic and improving the quality of vehicles and gasoline in Tehran could reduce the burden of disease from BTEX along with the health effects of other outdoor air pollutants.

Environmental and health risks assessment of n-alkanes and BTEX in Eze Iyi River at oil spill site in Isuikwuato, Abia State, Nigeria.

The environmental and health risks of n-alkanes and benzene, toluene, ethylbenzene, and xylene (BTEX) in Eze-Iyi River at Isuikwuato oil spill site were evaluated. The water samples (60) were collected from upstream and downstream during the dry and rainy seasons. Concentrations of n-alkanes and BTEX were determined using a gas chromatograph coupled with a flame ionization detector. The percentage recovery of 87.3% and 92.0% was obtained for n-alkanes and BTEX in the water sample. The environmental risk analysis for n-alkanes and BTEX showed 80% of the water samples had a ratio greater than 1 indicating environmental risk in the area. Hydrocarbon source identification using biomarkers indicates that the n-alkane (nC16) dominant during the dry and rainy seasons was from anthropogenic/biogenic source, while nC14 and nC17 were from microbial and marine algae biogenic sources, respectively. The benzene levels in 100% (downstream) and 80% (upstream) of samples in the dry season and 40% (upstream) and 100% (downstream) of samples in the rainy season were above the WHO permissible limit of 0.01 mg/L for drinking water. The health risk index of n-alkanes during the dry season for children (upstream) was greater than 1 signifying adverse health risk. Therefore, consumption of water from the river should be discouraged and routine monitoring by regulatory authorities maintained to checkmate the build-up of BTEX and n-alkanes.

Rapid on-site detection of underground petroleum pipeline leaks and risk assessment using portable gas chromatography-mass spectrometry and solid phase microextraction.

Locating underground pipeline leaks can be challenging due to their hidden nature and variable terrain conditions. To sample soil gas, solid-phase microextraction (SPME) was employed, and a portable gas chromatography/mass spectrometry (GC/MS) was used to detect the presence and concentrations of petroleum hydrocarbon volatile organic compounds (pH-VOCs), including benzene, toluene, ethylbenzene, and xylene (BTEX). We optimized the extraction method through benchtop studies using SPME. The appropriate fibre materials and exposure time were selected for each BTEX compound. Before applying SPME, we preconditioned the soil vapour samples by keeping the temperature at around 4 °C and using ethanol as a desorbing agent and moisture filters to minimize the impact of moisture. To conduct this optimisation, airbags were applied to condition the soil vapour samples and SPME sampling. By conditioning the samples using this method, we were able to improve analytical efficiency and accuracy while minimizing environmental impacts, resulting in more reliable research data in the field. The study employed portable GC/MS data to assess the concentration distribution of BTEX in soil vapour samples obtained from 1.5 m below the ground surface at 10 subsurface vapour monitoring locations at the leak site. After optimization, the detection limits of BTEX were almost 100 µg/m3, and the measurement repeatabilities were approximately 5% and 15% for BTEX standards in the laboratory and soil vapour samples in the field, respectively. The soil vapour samples showed a hotspot region with high BTEX concentrations, reaching 30 mg/m3, indicating a diesel return pipeline leak caused by a gasket failure in a flange. The prompt detection of the leak source was critical in minimizing environmental impact and worker safety hazards.

Level of BTEX in the Areas of Domestic Waste Incinerators in Northern Vietnam: A Comprehensive Assessment of Contamination, Composition and Human Health Risk.

The trend of the treatment of solid domestic waste by the domestic waste incinerator system is an option to improve waste management and to reduce the negative impacts on the environment and human health. Benzene, toluene, ethylbenzene, and xylenes (o-, m- and p-) (BTEX) are toxic chemical environmental contaminants that are released from different sources such as the domestic waste incinerator system. To determine the concentration of BTEX in the ambient air from these incinerator areas, the research team conducted four sampling campaigns in April, June, September, and November 2021, with a total of 80 samples collected. Concentrations of benzene, toluene, (m,p)-xylenes, o- xylenes and ethylbenzene ranged from 4.53 to 36.75 µg/m3, from 16.29 µg/m3 to 125.36 µg/m3, from 2.82 µg/m3 to 31.45 µg/m3, from 1.42 µg/m3 to 25.61 µg/m3, from 1.32 µg/m3 to 10.79 µg/m3, respectively. As a result of the risk assessment, it was determined that the incinerator's exhaust gas caused secondary environmental damage, impacting the health of not only workers but also people living in nearby communities. On that basis, the article recommends applying a number of management measures to minimize the negative impacts of the operation of the solid waste incinerator on the environment and the health of the workers operating the incinerator.

Exposure assessment of wastewater treatment plant employees to BTEX: a biological monitoring approach.

To monitor employees' work safety and exposure against air contaminants, Trans, trans-muconic acid, Hippuric acid, Methyl hippuric acid, Mandelic acid and Phenylglyoxylic acid can be used as reliable biomarkers of exposure to benzene, toluene, ethylbenzene, and xylene (BTEX) compounds. This study aims to determine the level of urinary metabolites of BTEX compounds using biological monitoring in the employees of a wastewater treatment plant (WWTP) in the south of Iran. The study was performed on 56 employees of the WWTP of one of the southern cities of Iran in 2020. Urine samples (n total = 112) consisting of 60 samples of employees working in the operation section (exposed group) and 52 samples of employees working in the administrative section (control group) in the WWTP were collected before and at the end of their shift. The mean concentration of urinary metabolites of BTEX of both groups ranged from 546.43 (µg/g cr) for trans, trans-muconic acid to 0.006 (µg/g cr) for methyl hippuric acid, which indicates that most of the evaluated metabolites showed a higher concentration than their occupational threshold limit value urine (p < 0.05). Regression analysis results showed a significant correlation (p < 0.05) between age and utilization of flame heaters with changes in the measured BTEX metabolites in the urine. The results of this study illustrate that WWTPs should be considered as one of the workplaces with potential sources of BTEX exposure for employees. Future investigations are recommended to perform itemized appraisals of BTEX intake sources, particularly in employees of the operational sections of WWTP.

Health risk assessment of volatile organic compounds (VOCs) in a refinery in the southwest of Iran using SQRA method.

Oil industries, such as oil refineries, are important sources of volatile organic compound production. These compounds have significant health effects on human health. In this study, a health risk assessment is carried out on volatile organic compounds (VOCs) in the recovery oil plant (ROP) unit of a refinery in southwest Iran. It was performed using the SQRA method including respiratory risk for chronic daily intake (CDI) of VOCs and cancer risk and non-cancer risk indices. Five locations in the area of oil effluents and five locations in the refinery area (control samples) were considered for evaluation. The sampling was done according to the standard NIOSH-1501 and SKC pumps. The gas chromatography/flame ionization detector (GC/FID) method was used to extract VOCs. The cancer slope factor (CSF) and respiratory reference dose (RFC) were calculated in addition to the respiratory risk (CDI). The end result shows that a significant difference was observed between the concentrations of volatile organic compounds in the two groups of air (P < 0.05). The SQRA risk assessment showed that the risk levels of benzene for workers in the pit area were very high (4-5). Health hazard levels were also evaluated as high levels for toluene (2-4) and moderate levels for xylene and paraxylene (1-3). The cancer risk assessment of volatile organic compounds recorded the highest level of cancer risk for benzene in the range of petroleum effluents (>1). Also, a non-cancer risk (HQ) assessment revealed that benzene had a significant health risk in the range of oil pits (2-3). Based on the results, petroleum industries, including refineries, should conduct health risk assessment studies of volatile organic compounds. The units that are directly related to the high level of VOCs should be considered sensitive groups, and their employees should be under special management to reduce the level of exposure to these compounds and other hazardous compounds.

Indoor exposure levels and risk assessment of volatile organic compounds in residences, schools, and offices in China from 2000 to 2021: A systematic review.

The last two decades have witnessed rapid urbanization and economic growth accompanied by severe indoor air pollution of volatile organic compounds (VOCs) in China. However, indoor VOC pollution across China has not been well characterized and documented. This study is a systematic review of field measurements of eight target VOCs (benzene, toluene, xylenes, acetaldehyde, p-dichlorobenzene, butadiene, trichloroethylene, and tetrachloroethylene) in residences, offices, and schools in China from 2000 to 2021. The results show that indoor pollution of benzene, toluene, and xylenes has been more serious in China than in other countries. Spatiotemporal distribution shows lower indoor VOC levels in east and south-east regions and a declining trend from 2000 to 2021. Moving into a dwelling more than 1 year after decoration and improving ventilation could significantly reduce exposure to indoor VOCs. Reducing benzene exposure is urgently needed because it is associated with greater health risks (4.5 × 10-4 for lifetime cancer risk and 8.3 for hazard quotient) than any other VOCs. The present study enriches the database of indoor VOC levels and provides scientific evidence for improving national indoor air quality standards as well as estimating the attributable disease burden caused by VOCs in China.

Risk assessment and dose-effect of co-exposure to benzene, toluene, ethylbenzene, xylene, and styrene (BTEXS) on pulmonary function: A cross-sectional study.

Inhalation is the most frequent route and the lung is the primary damaged organ for human exposure to benzene, toluene, ethylbenzene, xylene, and styrene (BTEXS). However, there is limited information on the risk and dose-effect of the BTEXS mixture on pulmonary function, particularly the overall effect. We conducted a cross-sectional study in a petrochemical plant in southern China. Spirometry and cumulative exposure dose (CED) of BTEXS were used to measure lung function and exposure levels for 635 workers in 2020, respectively. Forced vital capacity (FVC) and forced expiratory volume in 1 s (FEV1) were tested and interpreted as percentages to predicted values [FVC or FEV1% predicted], and FEV1 to FVC ratio [FEV1/FVC (%)]. We found the reduction in FVC% predicted and the risk of lung ventilation dysfunction (LVD) and its two subtypes (mixed and restrictive ventilation dysfunction, MVD, and MVD) were significantly associated with BTEXS individuals. In addition, pulmonary function damage associated with BTEXS was modified by the smoking status and age. Generalized weighted quantile sum (gWQS) regressions were used to estimate the overall dose-effect on lung function damage induced by the BTEXS mixture. Our results show wqs, an index of weighted quartiles for BTEXS, was potentially associated with the reduction in FVC and FEV1% predicted with the coefficients [95% confidence intervals (CI)] between -1.136 (-2.202, -0.070) and -1.230 (-2.265, -0.195). Odds ratios (ORs) and 95% CIs for the wqs index of LVD, MVD, and RVD were 1.362 (1.129, 1.594), 1.323 (1.084, 1.562), and 1.394 (1.096, 1.692), respectively. Furthermore, xylene, benzene, and toluene in the BTEXS mixture potentially contribute to the development of lung function impairment. Our novel findings demonstrated the dose-response relationships between pulmonary function impairment and the BTEXS mixture and disclosed the potential key pollutants in the BTEXS mixture.