Your browser doesn't support javascript.
loading
Assessment of small mechanical wastewater treatment plants: Relative life cycle environmental impacts of construction and operations.
Moussavi, Sussan; Thompson, Matthew; Li, Shaobin; Dvorak, Bruce.
Afiliação
  • Moussavi S; Department of Civil and Environmental Engineering, University of Nebraska-Lincoln, NE, 68588, United States.
  • Thompson M; Department of Civil and Environmental Engineering, University of Nebraska-Lincoln, NE, 68588, United States.
  • Li S; Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL, 61801, United States.
  • Dvorak B; Department of Civil and Environmental Engineering, University of Nebraska-Lincoln, NE, 68588, United States; Department of Biological Systems Engineering, University of Nebraska-Lincoln, NE, 68588, United States. Electronic address: bdvorak1@unl.edu.
J Environ Manage ; 292: 112802, 2021 Aug 15.
Article em En | MEDLINE | ID: mdl-34023791
Many slow growing and shrinking rural communities struggle with aging or inadequate wastewater treatment plants (WWTPs), and face challenges in constructing and operating such facilities. Although existing literature has provided insight into the environmental sustainability of large facilities, including both the construction and operational phases, these studies have not examined small, rural facilities treating less than 7000 m3/d (1.8 MGD) of wastewater in adequate depth and breadth. In this study, a detailed inventory of the construction and operational data for 16 case studies of small WWTPs was developed to elucidate their environmental life cycle impacts. An attributional LCA framework was followed. The results show that the environmental impacts of both the construction and operational phases are considerable. Energy use was the dominant contributor to the operational environmental impact, and improving energy efficiency of a plant may reduce the environmental impacts of a small WWTP. Construction impacts can vary considerably between facilities (e.g., coefficient of variation for the construction impacts ranged from 60% to 78% depending on the impact category). Process-related factors (e.g., concrete and reinforcing steel used in basins) are typically sized using the design flow; thus, much of the variability in construction impacts among plants stems from the non-process related infrastructure. Multiple regression analysis was used as an exploratory tool to identify which non-process related plant aspects contribute to the variable environmental impact of small WWTPs. These factors include aluminum, cast iron, and the capacity utilization ratio (defined as the ratio of average flow to design flow). Thus, industry practitioners should consider these factors when aiming to reduce the environmental impacts of a small WWTP related to construction. Scenario sensitivity analyses found that the environmental impact of construction became smaller with longer design life, and the end-of-life consideration does not heavily influence the environmental sustainability of a WWTP.
Assuntos
Palavras-chave

Texto completo: 1 Temas: ECOS / Aspectos_gerais Bases de dados: MEDLINE Assunto principal: Eliminação de Resíduos Líquidos / Purificação da Água Tipo de estudo: Prognostic_studies Limite: Animals Idioma: En Revista: J Environ Manage Ano de publicação: 2021 Tipo de documento: Article País de afiliação: Estados Unidos

Texto completo: 1 Temas: ECOS / Aspectos_gerais Bases de dados: MEDLINE Assunto principal: Eliminação de Resíduos Líquidos / Purificação da Água Tipo de estudo: Prognostic_studies Limite: Animals Idioma: En Revista: J Environ Manage Ano de publicação: 2021 Tipo de documento: Article País de afiliação: Estados Unidos