Characteristics of heavy metal migration during pyrolysis of typical oily wastes and environmental risk assessment of pyrolysis residues.
Waste Manag
; 183: 174-183, 2024 Jun 30.
Article
em En
| MEDLINE
| ID: mdl-38759275
ABSTRACT
Solid-phase residues from pyrolysis of oily wastes (OS) are widely used due to their rich pore structure and strong adsorption capacity. In this study, pyrolysis residues (OS-P) were obtained from the pyrolysis treatment of four typical OS in Karamay, Xinjiang. The results indicate that the crystalline substances in OS-P mainly were SiO2, BaSO4, and graphite. The heavy metals of OS-P were higher than that of OS in the following order Zn > Cu > Ni > Cr > Pb > Cd. The results of the improvement of Community Bureau of Reference (BCR) sequential extraction showed that the proportion of Cu, Ni and Cr in OS1-P in the residual fraction was higher than that of the other three OS. The residual fraction of Cu, Ni, and Cr in OS1-P increased from 16.0 %, 30.0 %, and 11.0 % to 66.1 %, 81.9 %, and 89.2 %, respectively. After pyrolysis treatment, the leaching concentration of heavy metals in the residue was reduced. Referring to the requirements for heavy metal control limits (GB 4284-2018), all heavy metals in OS-P showed low risk. Their potential ecological risk indices were 4.11, 3.13, 4.87 and 5.35, respectively, indicating that the potential ecological hazards of heavy metals from OS-P were slight. There was no significant effect on the histopathological changes of kidney, lung, liver, ovary and testis of mice, showing that the rational use of OS-P in production will not produce toxic effects on target animals. Based on risk assessment and safety evaluation, the application of OS-P is controllable, safe and reliable for resource utilization.
Palavras-chave
Texto completo:
1
Temas:
ECOS
/
Aspectos_gerais
Bases de dados:
MEDLINE
Assunto principal:
Pirólise
/
Metais Pesados
Limite:
Animals
País/Região como assunto:
Asia
Idioma:
En
Revista:
Waste Manag
Assunto da revista:
SAUDE AMBIENTAL
/
TOXICOLOGIA
Ano de publicação:
2024
Tipo de documento:
Article