ABSTRACT
Nanopore sequencing devices read individual RNA strands directly. This facilitates identification of exon linkages and nucleotide modifications; however, using conventional direct RNA nanopore sequencing, the 5' and 3' ends of poly(A) RNA cannot be identified unambiguously. This is due in part to RNA degradation in vivo and in vitro that can obscure transcription start and end sites. In this study, we aimed to identify individual full-length human RNA isoforms among â¼4 million nanopore poly(A)-selected RNA reads. First, to identify RNA strands bearing 5' m7G caps, we exchanged the biological cap for a modified cap attached to a 45-nt oligomer. This oligomer adaptation method improved 5' end sequencing and ensured correct identification of the 5' m7G capped ends. Second, among these 5'-capped nanopore reads, we screened for features consistent with a 3' polyadenylation site. Combining these two steps, we identified 294,107 individual high-confidence full-length RNA scaffolds from human GM12878 cells, most of which (257,721) aligned to protein-coding genes. Of these, 4876 scaffolds indicated unannotated isoforms that were often internal to longer, previously identified RNA isoforms. Orthogonal data for m7G caps and open chromatin, such as CAGE and DNase-HS seq, confirmed the validity of these high-confidence RNA scaffolds.
Subject(s)
RNA Isoforms/chemistry , RNA, Messenger/chemistry , Cell Line, Tumor , Humans , Nanopore Sequencing/methods , RNA 3' Polyadenylation Signals , RNA Isoforms/genetics , RNA, Messenger/genetics , TranscriptomeABSTRACT
The SARS-CoV-2 virus has a complex transcriptome characterised by multiple, nested subgenomic RNAsused to express structural and accessory proteins. Long-read sequencing technologies such as nanopore direct RNA sequencing can recover full-length transcripts, greatly simplifying the assembly of structurally complex RNAs. However, these techniques do not detect the 5' cap, thus preventing reliable identification and quantification of full-length, coding transcript models. Here we used Nanopore ReCappable Sequencing (NRCeq), a new technique that can identify capped full-length RNAs, to assemble a complete annotation of SARS-CoV-2 sgRNAs and annotate the location of capping sites across the viral genome. We obtained robust estimates of sgRNA expression across cell lines and viral isolates and identified novel canonical and non-canonical sgRNAs, including one that uses a previously un-annotated leader-to-body junction site. The data generated in this work constitute a useful resource for the scientific community and provide important insights into the mechanisms that regulate the transcription of SARS-CoV-2 sgRNAs.
Subject(s)
COVID-19 , Nanopores , RNA, Guide, Kinetoplastida/chemistry , COVID-19/genetics , Genome, Viral/genetics , Humans , RNA Caps , RNA, Viral/genetics , RNA, Viral/metabolism , SARS-CoV-2/geneticsABSTRACT
Among the large, diverse set of mammalian long noncoding RNAs (lncRNAs), long noncoding primary microRNAs (lnc-pri-miRNAs) are those that host miRNAs. Whether lnc-pri-miRNA loci have important biological function independent of their cognate miRNAs is poorly understood. From a genome-scale lncRNA screen, lnc-pri-miRNA loci were enriched for function in cell proliferation, and in glioblastoma (i.e., GBM) cells with DGCR8 or DROSHA knockdown, lnc-pri-miRNA screen hits still regulated cell growth. To molecularly dissect the function of a lnc-pri-miRNA locus, we studied LOC646329 (also known as MIR29HG), which hosts the miR-29a/b1 cluster. In GBM cells, LOC646329 knockdown reduced miR-29a/b1 levels, and these cells exhibited decreased growth. However, genetic deletion of the miR-29a/b1 cluster (LOC646329-miR29Δ) did not decrease cell growth, while knockdown of LOC646329-miR29Δ transcripts reduced cell proliferation. The miR-29a/b1-independent activity of LOC646329 corresponded to enhancer-like activation of a neighboring oncogene (MKLN1), regulating cell propagation. The LOC646329 locus interacts with the MKLN1 promoter, and antisense oligonucleotide knockdown of the lncRNA disrupts these interactions and reduces the enhancer-like activity. More broadly, analysis of genome-wide data from multiple human cell types showed that lnc-pri-miRNA loci are significantly enriched for DNA looping interactions with gene promoters as well as genomic and epigenetic characteristics of transcriptional enhancers. Functional studies of additional lnc-pri-miRNA loci demonstrated cognate miRNA-independent enhancer-like activity. Together, these data demonstrate that lnc-pri-miRNA loci can regulate cell biology via both miRNA-dependent and miRNA-independent mechanisms.
Subject(s)
Cell Proliferation/genetics , Genetic Loci , RNA, Long Noncoding/metabolism , Apoptosis/genetics , Gene Knockdown Techniques , HEK293 Cells , Humans , MicroRNAs/genetics , MicroRNAs/metabolism , RNA, Long Noncoding/genetics , RNA-SeqABSTRACT
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
ABSTRACT
Understanding transcriptomes requires documenting the structures, modifications, and abundances of RNAs as well as their proximity to other molecules. The methods that make this possible depend critically on enzymes (including mutant derivatives) that act on nucleic acids for capturing and sequencing RNA. We tested two 3' nucleotidyl transferases, Saccharomyces cerevisiae poly(A) polymerase and Schizosaccharomyces pombe Cid1, for the ability to add base and sugar modified rNTPs to free RNA 3' ends, eventually focusing on Cid1. Although unable to polymerize ΨTP or 1meΨTP, Cid1 can use 5meUTP and 4thioUTP. Surprisingly, Cid1 can use inosine triphosphate to add poly(I) to the 3' ends of a wide variety of RNA molecules. Most poly(A) mRNAs efficiently acquire a uniform tract of about 50 inosine residues from Cid1, whereas non-poly(A) RNAs acquire longer, more heterogeneous tails. Here we test these activities for use in direct RNA sequencing on nanopores, and find that Cid1-mediated poly(I)-tailing permits detection and quantification of both mRNAs and non-poly(A) RNAs simultaneously, as well as enabling the analysis of nascent RNAs associated with RNA polymerase II. Poly(I) produces a different current trace than poly(A), enabling recognition of native RNA 3' end sequence lost by in vitro poly(A) addition. Addition of poly(I) by Cid1 offers a broadly useful alternative to poly(A) capture for direct RNA sequencing on nanopores.
Subject(s)
Nanopores , Nucleotides/chemistry , Nucleotidyltransferases/metabolism , Polymers/chemistry , Polynucleotide Adenylyltransferase/metabolism , Saccharomyces cerevisiae/enzymology , Schizosaccharomyces pombe Proteins/metabolism , Schizosaccharomyces/enzymology , Sequence Analysis, RNA/methods , Nucleotidyltransferases/genetics , Polynucleotide Adenylyltransferase/genetics , Schizosaccharomyces pombe Proteins/geneticsABSTRACT
High-throughput complementary DNA sequencing technologies have advanced our understanding of transcriptome complexity and regulation. However, these methods lose information contained in biological RNA because the copied reads are often short and modifications are not retained. We address these limitations using a native poly(A) RNA sequencing strategy developed by Oxford Nanopore Technologies. Our study generated 9.9 million aligned sequence reads for the human cell line GM12878, using thirty MinION flow cells at six institutions. These native RNA reads had a median length of 771 bases, and a maximum aligned length of over 21,000 bases. Mitochondrial poly(A) reads provided an internal measure of read-length quality. We combined these long nanopore reads with higher accuracy short-reads and annotated GM12878 promoter regions to identify 33,984 plausible RNA isoforms. We describe strategies for assessing 3' poly(A) tail length, base modifications and transcript haplotypes.
Subject(s)
Nanopore Sequencing/methods , Poly A/genetics , Sequence Analysis, RNA/methods , Transcriptome , Cells, Cultured , HumansABSTRACT
DNA chemical modifications regulate genomic function. We present a framework for mapping cytosine and adenosine methylation with the Oxford Nanopore Technologies MinION using this nanopore sequencer's ionic current signal. We map three cytosine variants and two adenine variants. The results show that our model is sensitive enough to detect changes in genomic DNA methylation levels as a function of growth phase in Escherichia coli.
Subject(s)
5-Methylcytosine/metabolism , DNA Methylation , High-Throughput Nucleotide Sequencing/methods , Nanopores , 5-Methylcytosine/analysis , Escherichia coli/genetics , Genome, Bacterial , High-Throughput Nucleotide Sequencing/instrumentation , Markov Chains , Models, GeneticABSTRACT
Speed, single-base sensitivity and long read lengths make nanopores a promising technology for high-throughput sequencing. We evaluated and optimized the performance of the MinION nanopore sequencer using M13 genomic DNA and used expectation maximization to obtain robust maximum-likelihood estimates for insertion, deletion and substitution error rates (4.9%, 7.8% and 5.1%, respectively). Over 99% of high-quality 2D MinION reads mapped to the reference at a mean identity of 85%. We present a single-nucleotide-variant detection tool that uses maximum-likelihood parameter estimates and marginalization over many possible read alignments to achieve precision and recall of up to 99%. By pairing our high-confidence alignment strategy with long MinION reads, we resolved the copy number for a cancer-testis gene family (CT47) within an unresolved region of human chromosome Xq24.
Subject(s)
High-Throughput Nucleotide Sequencing/methods , Nanopores , Algorithms , Gene Dosage , Humans , Neoplasms/geneticsABSTRACT
Cytosine, 5-methylcytosine, and 5-hydroxymethylcytosine were identified during translocation of single DNA template strands through a modified Mycobacterium smegmatis porin A (M2MspA) nanopore under control of phi29 DNA polymerase. This identification was based on three consecutive ionic current states that correspond to passage of modified or unmodified CG dinucleotides and their immediate neighbors through the nanopore limiting aperture. To establish quality scores for these calls, we examined ~3,300 translocation events for 48 distinct DNA constructs. Each experiment analyzed a mixture of cytosine-, 5-methylcytosine-, and 5-hydroxymethylcytosine-bearing DNA strands that contained a marker that independently established the correct cytosine methylation status at the target CG of each molecule tested. To calculate error rates for these calls, we established decision boundaries using a variety of machine-learning methods. These error rates depended upon the identity of the bases immediately 5' and 3' of the targeted CG dinucleotide, and ranged from 1.7% to 12.2% for a single-pass read. We estimate that Q40 values (0.01% error rates) for methylation status calls could be achieved by reading single molecules 5-19 times depending upon sequence context.
Subject(s)
5-Methylcytosine/isolation & purification , Cytosine/analogs & derivatives , Cytosine/isolation & purification , DNA Methylation/genetics , DNA/analysis , Epigenomics/methods , Nanopores , 5-Methylcytosine/chemistry , Cytosine/chemistry , Research DesignABSTRACT
Individual DNA molecules can be read at single nucleotide precision using nanopores coupled to processive enzymes. Discrimination among the four canonical bases has been achieved, as has discrimination among cytosine, 5-methylcytosine (mC), and 5-hydroxymethylcytosine (hmC). Two additional modified cytosine bases, 5-carboxylcytosine (caC) and 5-formylcytosine (fC), are produced during enzymatic conversion of hmC to cytosine in mammalian cells. Thus, an accurate picture of the cytosine epigenetic status in target cells should also include these C5-cytosine variants. In the present study, we used a patch clamp amplifier to acquire ionic current traces caused by phi29 DNA polymerase-controlled translocation of DNA templates through the M2MspA pore. Decision boundaries based on three consecutive ionic current states were implemented to call mC, hmC, caC, fC, or cytosine at CG dinucleotides in â¼4400 individual DNA molecules. We found that the percentage of correct base calls for single pass reads ranged from 91.6% to 98.3%. This accuracy depended upon the identity of nearest neighbor bases surrounding the CG dinucleotide.
Subject(s)
Cytosine/metabolism , DNA/metabolism , Nanopores , Cytosine/analogs & derivatives , Cytosine/chemistry , DNA/chemistry , DNA-Directed DNA Polymerase/chemistry , DNA-Directed DNA Polymerase/metabolism , Molecular StructureABSTRACT
Complexes of phi29 DNA polymerase and DNA fluctuate on the millisecond time scale between two ionic current amplitude states when captured atop the α-hemolysin nanopore in an applied field. The lower amplitude state is stabilized by complementary dNTP and thus corresponds to complexes in the post-translocation state. We have demonstrated that in the upper amplitude state, the DNA is displaced by a distance of one nucleotide from the post-translocation state. We propose that the upper amplitude state corresponds to complexes in the pre-translocation state. Force exerted on the template strand biases the complexes toward the pre-translocation state. Based on the results of voltage and dNTP titrations, we concluded through mathematical modeling that complementary dNTP binds only to the post-translocation state, and we estimated the binding affinity. The equilibrium between the two states is influenced by active site-proximal DNA sequences. Consistent with the assignment of the upper amplitude state as the pre-translocation state, a DNA substrate that favors the pre-translocation state in complexes on the nanopore is a superior substrate in bulk phase for pyrophosphorolysis. There is also a correlation between DNA sequences that bias complexes toward the pre-translocation state and the rate of exonucleolysis in bulk phase, suggesting that during DNA synthesis the pathway for transfer of the primer strand from the polymerase to exonuclease active site initiates in the pre-translocation state.
Subject(s)
Bacillus Phages/enzymology , Bacillus Phages/genetics , DNA Replication/physiology , DNA-Directed DNA Polymerase/genetics , DNA-Directed DNA Polymerase/metabolism , Nanopores , ATP-Binding Cassette Transporters/chemistry , ATP-Binding Cassette Transporters/metabolism , Catalytic Domain/physiology , DNA, Viral/metabolism , DNA-Directed DNA Polymerase/chemical synthesis , Diphosphates/metabolism , Enzyme Activation/physiology , Exonucleases/metabolism , Hemolysin Proteins/chemistry , Hemolysin Proteins/metabolism , Inverted Repeat Sequences/genetics , Molecular Motor Proteins/physiology , Nucleic Acid ConformationABSTRACT
Complexes formed between phi29 DNA polymerase (DNAP) and DNA fluctuate discretely between the pre-translocation and post-translocation states on the millisecond time scale. The translocation fluctuations can be observed in ionic current traces when individual complexes are captured atop the α-hemolysin nanopore in an electric field. The presence of complementary 2'-deoxynucleoside triphosphate (dNTP) shifts the equilibrium across the translocation step toward the post-translocation state. Here we have determined quantitatively the kinetic relationship between the phi29 DNAP translocation step and dNTP binding. We demonstrate that dNTP binds to phi29 DNAP-DNA complexes only after the transition from the pre-translocation state to the post-translocation state; dNTP binding rectifies the translocation but it does not directly drive the translocation. Based on the measured time traces of current amplitude, we developed a method for determining the forward and reverse translocation rates and the dNTP association and dissociation rates, individually at each dNTP concentration and each voltage. The translocation rates, and their response to force, match those determined for phi29 DNAP-DNA binary complexes and are unaffected by dNTP. The dNTP association and dissociation rates do not vary as a function of voltage, indicating that force does not distort the polymerase active site and that dNTP binding does not directly involve a displacement in the translocation direction. This combined experimental and theoretical approach and the results obtained provide a framework for separately evaluating the effects of biological variables on the translocation transitions and their effects on dNTP binding.
Subject(s)
Bacillus Phages/enzymology , DNA-Directed DNA Polymerase/metabolism , Nucleotides/metabolism , Bacillus Phages/metabolism , Base Sequence , DNA/metabolism , KineticsABSTRACT
During each catalytic cycle, DNA polymerases select deoxyribonucleoside triphosphate (dNTP) substrates complementary to a templating base with high fidelity from a pool that includes noncomplementary dNTPs and both complementary and noncomplementary ribonucleoside triphosphates (rNTPs). The Klenow fragment of Escherichia coli DNA polymerase I (KF) achieves this through a series of conformational transitions that precede the chemical step of phosphodiester bond formation. Kinetic evidence from fluorescence and FRET experiments indicates that discrimination of the base and sugar moieties of the incoming nucleotide occurs in distinct, sequential steps during the selection pathway. Here we show that KF-DNA complexes formed with complementary rNTPs or with noncomplementary nucleotides can be distinguished on the basis of their properties when captured in an electric field atop the α-hemolysin nanopore. The average nanopore dwell time of KF-DNA complexes increased as a function of complementary rNTP concentration. The increase was less than that promoted by complementary dNTP, indicating that the rNTP complexes are more stable than KF-DNA binary complexes but less stable than KF-DNA-dNTP ternary complexes. KF-DNA-rNTP complexes could also be distinguished from KF-DNA-dNTP complexes on the basis of ionic current amplitude. In contrast to complementary rNTPs, noncomplementary dNTPs and rNTPs diminished the average nanopore dwell time of KF-DNA complexes in a concentration-dependent manner, suggesting that binding of a noncomplementary nucleotide keeps the KF-DNA complex in a less stable state. These results imply that nucleotide selection proceeds through a series of complexes of increasing stability in which substrates with the correct moiety promote the forward transitions.
Subject(s)
DNA Polymerase I/chemistry , Nanopores , Algorithms , Biophysics/methods , DNA/chemistry , DNA Polymerase I/metabolism , Electrophysiology , Escherichia coli/enzymology , Fluorescence Resonance Energy Transfer/methods , Kinetics , Models, Statistical , Nanotechnology/methods , Nucleotides/chemistry , Oligonucleotides/chemistry , Protein Binding , Substrate SpecificityABSTRACT
Complexes formed between the bacteriophage phi29 DNA polymerase (DNAP) and DNA fluctuate between the pre-translocation and post-translocation states on the millisecond time scale. These fluctuations can be directly observed with single-nucleotide precision in real-time ionic current traces when individual complexes are captured atop the α-hemolysin nanopore in an applied electric field. We recently quantified the equilibrium across the translocation step as a function of applied force (voltage), active-site proximal DNA sequences, and the binding of complementary dNTP. To gain insight into the mechanism of this step in the DNAP catalytic cycle, in this study, we have examined the stochastic dynamics of the translocation step. The survival probability of complexes in each of the two states decayed at a single exponential rate, indicating that the observed fluctuations are between two discrete states. We used a robust mathematical formulation based on the autocorrelation function to extract the forward and reverse rates of the transitions between the pre-translocation state and the post-translocation state from ionic current traces of captured phi29 DNAP-DNA binary complexes. We evaluated each transition rate as a function of applied voltage to examine the energy landscape of the phi29 DNAP translocation step. The analysis reveals that active-site proximal DNA sequences influence the depth of the pre-translocation and post-translocation state energy wells and affect the location of the transition state along the direction of the translocation.
Subject(s)
DNA-Directed DNA Polymerase/metabolism , DNA/metabolism , Thermodynamics , Biocatalysis , DNA/chemistry , DNA-Directed DNA Polymerase/chemistryABSTRACT
Historically, RNA has been sequenced as cDNA copies derived from reverse transcription of cellular RNA followed by PCR amplification. Recently, RNA sequencing using nanopores has emerged as an alternative. Using this technology, individual cellular RNA strands are read directly as they are driven through nanoscale pores by an applied voltage. The speed of translocation is regulated by a helicase that is loaded onto each RNA strand by an adapter that also facilitates capture by the nanopore electric field. Here we describe a technique for adapting human ribosomal RNA subunits for nanopore sequencing. Using this strategy, a single Oxford Nanopore MinION run delivered 470,907 sequence reads of which 396,048 aligned to ribosomal RNA, with 28S, 18S, 5.8S, and 5S coverage of 6053, 369,472, 16,058, and 4465 reads, respectively. Example alignments that reveal putative nucleotide modifications are provided.
Subject(s)
Nanopore Sequencing/methods , Nucleotides/genetics , RNA, Ribosomal/genetics , Sequence Analysis, RNA/methods , Humans , Nanopores , Sequence Analysis, DNA/methodsABSTRACT
Proteins present a significant challenge for nanopore-based sequence analysis. This is partly due to their stable tertiary structures that must be unfolded for linear translocation, and the absence of regular charge density. To address these challenges, here we describe how ClpXP, an ATP-dependent protein unfoldase, can be harnessed to unfold and processively translocate multi-domain protein substrates through an alpha-hemolysin nanopore sensor. This process results in ionic current patterns that are diagnostic of protein sequence and structure at the single-molecule level.
Subject(s)
Endopeptidase Clp/metabolism , Hemolysin Proteins/chemistry , Hemolysin Proteins/metabolism , Lipid Bilayers/metabolism , Nanopores , Protein Unfolding , Protein TransportABSTRACT
We describe a method for direct tRNA sequencing using the Oxford Nanopore MinION. The principal technical advance is custom adapters that facilitate end-to-end sequencing of individual transfer RNA (tRNA) molecules at subnanometer precision. A second advance is a nanopore sequencing pipeline optimized for tRNA. We tested this method using purified E. coli tRNAfMet, tRNALys, and tRNAPhe samples. 76-92% of individual aligned tRNA sequence reads were full length. As a proof of concept, we showed that nanopore sequencing detected all 43 expected isoacceptors in total E. coli MRE600 tRNA as well as isodecoders that further define that tRNA population. Alignment-based comparisons between the three purified tRNAs and their synthetic controls revealed systematic nucleotide miscalls that were diagnostic of known modifications. Systematic miscalls were also observed proximal to known modifications in total E. coli tRNA alignments, including a highly conserved pseudouridine in the T loop. This work highlights the potential of nanopore direct tRNA sequencing as well as improvements needed to implement tRNA sequencing for human healthcare applications.
Subject(s)
Nanopore Sequencing , Nanopores , Escherichia coli/genetics , High-Throughput Nucleotide Sequencing , Humans , NucleotidesABSTRACT
Determining the layers of gene regulation within the innate immune response is critical to our understanding of the cellular responses to infection and dysregulation in disease. We identified a conserved mechanism of gene regulation in human and mouse via changes in alternative first exon (AFE) usage following inflammation, resulting in changes to the isoforms produced. Of these AFE events, we identified 95 unannotated transcription start sites in mice using a de novo transcriptome generated by long-read native RNA-sequencing, one of which is in the cytosolic receptor for dsDNA and known inflammatory inducible gene, Aim2. We show that this unannotated AFE isoform of Aim2 is the predominant isoform expressed during inflammation and contains an iron-responsive element in its 5'UTR enabling mRNA translation to be regulated by iron levels. This work highlights the importance of examining alternative isoform changes and translational regulation in the innate immune response and uncovers novel regulatory mechanisms of Aim2.
Subject(s)
Alternative Splicing , DNA-Binding Proteins/genetics , Exons , Immunity, Innate/genetics , Inflammation/genetics , Macrophages/metabolism , 5' Untranslated Regions , Animals , Cells, Cultured , DNA-Binding Proteins/metabolism , Gene Expression Profiling , Humans , Inflammation/immunology , Inflammation/metabolism , Macrophages/immunology , Mice , Promoter Regions, Genetic , TranscriptomeABSTRACT
For the past two decades, microbial monitoring of the International Space Station (ISS) has relied on culture-dependent methods that require return to Earth for analysis. This has a number of limitations, with the most significant being bias towards the detection of culturable organisms and the inherent delay between sample collection and ground-based analysis. In recent years, portable and easy-to-use molecular-based tools, such as Oxford Nanopore Technologies' MinION™ sequencer and miniPCR bio's miniPCR™ thermal cycler, have been validated onboard the ISS. Here, we report on the development, validation, and implementation of a swab-to-sequencer method that provides a culture-independent solution to real-time microbial profiling onboard the ISS. Method development focused on analysis of swabs collected in a low-biomass environment with limited facility resources and stringent controls on allowed processes and reagents. ISS-optimized procedures included enzymatic DNA extraction from a swab tip, bead-based purifications, altered buffers, and the use of miniPCR and the MinION. Validation was conducted through extensive ground-based assessments comparing current standard culture-dependent and newly developed culture-independent methods. Similar microbial distributions were observed between the two methods; however, as expected, the culture-independent data revealed microbial profiles with greater diversity. Protocol optimization and verification was established during NASA Extreme Environment Mission Operations (NEEMO) analog missions 21 and 22, respectively. Unique microbial profiles obtained from analog testing validated the swab-to-sequencer method in an extreme environment. Finally, four independent swab-to-sequencer experiments were conducted onboard the ISS by two crewmembers. Microorganisms identified from ISS swabs were consistent with historical culture-based data, and primarily consisted of commonly observed human-associated microbes. This simplified method has been streamlined for high ease-of-use for a non-trained crew to complete in an extreme environment, thereby enabling environmental and human health diagnostics in real-time as future missions take us beyond low-Earth orbit.