ABSTRACT
The pancreatic ductal adenocarcinoma (PDAC) tumor microenvironment is distinguished by a high degree of fibrosis and inflammation, known as desmoplasia. Desmoplasia increases the stromal deposition and extracellular matrix (ECM) stiffness observed in the tumor microenvironment, contributing to the dampened penetration of pharmacological agents. The molecular and biophysical composition of the ECM during the earliest cellular changes in the development of PDAC, i.e. acinar ductal metaplasia (ADM), has not been extensively explored. We report that the mRNA expression of key protein components of the ECM increases during ADM in p48Cre/+;LSL-KrasG12D (KC) mouse acinar organoids cultured in Matrigel. Treatment of the organoids with small molecular weight epigenetic modulating compounds that inhibit or reverse ADM (largazole, FK228 and chaetocin) dramatically reduced the tissue mRNA expression of collagens, hyaluronan synthase, laminin and fibronectin. The storage moduli, determined by video tracking of fluorescent nanoparticles embedded into the Matrigel, increased during ADM and was reduced following treatment with the epigenetic modulating compounds. We report that the ECM of mouse organoids stiffens during ADM and is further enhanced by the presence of mutant Kras. Moreover, select HDAC and HMT inhibitors reduced the mRNA expression of ECM components and ECM stiffness during inhibition and reversal of ADM, suggesting that these compounds may be useful as adjuvants to enhance the tumor penetration of agents used to treat PDAC.
ABSTRACT
We report a numerical investigation of the magnetophoresis of solutions containing paramagnetic metal ions. Using a simulated magnetic field of a superconducting magnet and the convection-diffusion model, we study the transport of transition metal salts through a porous medium domain. In particular, through a detailed comparison of the numerical results of magnetophoretic velocity and ion concentration profiles with prior published experiments, we validate the model. Subsequent to model validation, we perform a systematic analysis of the model parameters on the magnetophoresis of metal ions. Magnetophoresis is quantified with a magnetic Péclet number Pem. Under a non-uniform magnetic field, Pem initially rises, exhibiting a local maximum, and subsequently declines towards a quasi-steady value. Our results show that both the initial and maximum Pem values increase with increasing magnetic susceptibility, initial concentration of metal solutes, and ion cluster size. Conversely, Pem decreases as the porosity of the medium increases. Finally, the adsorption of metal salts onto the porous media surface is modeled through a dimensionless Damkohler number Daad. Our results suggest that the adsorption significantly slows the magnetophoresis and self-diffusion of the paramagnetic metal salts, with a net magnetophoresis velocity dependent on the kinetics and equilibrium adsorption properties of the metal salts. The latter result underscores the crucial role of adsorption in future magnetophoresis research.
ABSTRACT
INTRODUCTION: The Florida-California Cancer Research, Education, and Engagement (CaRE2) Health Equity Center is a triad partnership committed to increasing institutional capacity for cancer disparity research, the diversity of the cancer workforce, and community empowerment. This article provides an overview of the structure, process innovations, and initial outcomes from the first 4 years of the CaRE2 triad partnership. METHODS: CaRE2 serves diverse populations in Florida and California using a "molecule to the community and back" model. We prioritize research on the complex intersection of biological, environmental, and social determinants health, working together with scientific and health disparities communities, sharing expertise across institutions, bidirectional training, and community outreach. Partnership progress and outcomes were assessed using mixed methods and four Program Steering Committee meetings. RESULTS: Research capacity was increased through development of a Living Repository of 81 cancer model systems from minority patients for novel cancer drug development. CaRE2 funded 15 scientific projects resulting in 38 publications. Workforce diversity entailed supporting 94 cancer trainees (92 URM) and 34 ESIs (32 URM) who coauthored 313 CaRE2-related publications and received 48 grants. Community empowerment was promoted via outreaching to more than 3000 individuals, training 145 community cancer advocates (including 28 Community Scientist Advocates), and publishing 10 community reports. CaRE2 members and trainees together have published 639 articles, received 61 grants, and 57 awards. CONCLUSION: The CaRE2 partnership has achieved its initial aims. Infrastructure for translational cancer research was expanded at one partner institution, and cancer disparities research was expanded at the two cancer centers.
Subject(s)
Health Equity , Neoplasms , Humans , California , Florida , Minority Groups , Neoplasms/therapyABSTRACT
Excess unabsorbed iron in the gastrointestinal tract may select for enteric pathogens and increase the incidence and severity of infectious disease. Aspergillus oryzae (Ao) is a filamentous fungus that has the ability to accumulate and store large amounts of iron, and when used as a supplement or fortificant, has similar absorption to ferrous sulphate (FeSO4) in humans. The objective of this study was to determine the effect of iron-enriched Ao (Ao iron) compared with FeSO4 on iron accumulation, growth and motility of the Gram-negative enteric pathogen, S. Typhimurium. S. Typhimurium was cultured in media containing no added iron or 1 µM elemental iron as either Ao iron or FeSO4. S. Typhimurium cultured with FeSO4 accumulated more iron than those cultured with Ao iron. Genes regulated by the iron-activated transcriptional repressor, Fur, did not differ between control and Ao iron, but decreased in S. Typhimurium cultured with FeSO4 compared with both groups. Growth of S. Typhimurium was greater when cultured with FeSO4 compared with Ao iron and control. S. Typhimurium swam faster, had greater acceleration and travelled further when cultured with FeSO4 compared with Ao iron and control; swim speed, acceleration and distance travelled did not differ between Ao iron and control. These findings provide evidence that Ao iron reduces the virulence of a common enteric pathogen in vitro. Further research is required to determine whether iron-enriched Ao is a suitable iron supplement to improve iron delivery in areas with a high infection burden.
Subject(s)
Aspergillus oryzae , Iron , Humans , Iron/pharmacology , Ferrous Compounds , SulfatesABSTRACT
Insulator based dielectrophoresis (iDEP) is becoming increasingly important in emerging biomolecular applications, including particle purification, fractionation, and separation. Compared to conventional electrode-based dielectrophoresis (eDEP) techniques, iDEP has been demonstrated to have a higher degree of selectivity of biological samples while also being less biologically intrusive. Over the past two decades, substantial technological advances have been made, enabling iDEP to be applied from micro, to nano and molecular scales. Soft particles, including cell organelles, viruses, proteins, and nucleic acids, have been manipulated using iDEP, enabling the exploration of subnanometer biological interactions. Recent investigations using this technique have demonstrated a wide range of applications, including biomarker screening, protein folding analysis, and molecular sensing. Here, we review current state-of-art research on iDEP systems and highlight potential future work.
Subject(s)
Electrophoresis , Microfluidic Analytical Techniques , Monitoring, Physiologic , ProteinsABSTRACT
This paper describes microparticle and bacterial translocation studies using low aspect ratio solid-state micropores. Micropores, 5 µm in diameter, were fabricated in 200 nm thick free-standing silicon nitride membranes, resulting in pores with an extremely low aspect ratio, nominally 0.04. For microparticle translocation experiments, sulfonated polystyrene microparticles and magnetic microbeads in size range of 1-4 µm were used. Using the microparticle translocation characteristics, we find that particle translocations result in a change only in the pore's geometrical resistance while the access resistance remains constant. Furthermore, we demonstrate the ability of our micropore to probe high-resolution shape information of translocating analytes using concatenated magnetic microspheres. Distinct current drop peaks were observed for each microsphere of the multibead architecture. For bacterial translocation experiments, nonflagellated Escherichia coli (strain HCB 5) and wild type flagellated Salmonella typhimurium (strain SJW1103) were used. Distinct current signatures for the two bacteria were obtained and this difference in translocation behavior was attributed to different surface protein distributions on the bacteria. Our findings may help in developing low aspect ratio pores for high-resolution microparticle characterization and single-cell analysis.
Subject(s)
Membranes, Artificial , Microspheres , Single-Cell Analysis/instrumentation , Single-Cell Analysis/methods , Bacterial Translocation , Equipment Design , Escherichia coli/physiology , Particle Size , Porosity , Salmonella typhimurium/physiology , Silicon CompoundsABSTRACT
Erythrocytes are natural multifunctional biomaterials that can be engineered for use as micro robotic vectors for therapeutic applications. Erythrocyte based micromotors offer several advantages over existing bio-hybrid micromotors, but current control mechanisms are often complex, utilizing multiple external signals, such as tandem magnetic and acoustic fields to achieve both actuation and directional control. Further, existing actuation methods rely on proximity to a substrate to achieve effective propulsion through symmetry breaking. Alternatively, control mechanisms only requiring the use of a single control input may aid in the translational use of these devices. Here, we report a simple scalable technique for fabricating erythrocyte-based magnetic biohybrid micromotors and demonstrate the ability to control two modes of motion, surface rolling and bulk swimming, using a single uniform rotating magnetic field. While rolling exploits symmetry breaking from the proximity of a surface, bulk swimming relies on naturally occurring shape asymmetry of erythrocytes. We characterize swimming and rolling kinematics, including step-out frequencies, propulsion velocity, and steerability in aqueous solutions using open-loop control. The observed dynamics may enable the development of future erythrocyte micromotor designs and control strategies for therapeutic applications.
ABSTRACT
BACKGROUND AND AIMS: Aberrant acinar to ductal metaplasia (ADM), one of the earliest events involved in exocrine pancreatic cancer development, is typically studied using pancreata from genetically engineered mouse models. METHODS: We used primary, human pancreatic acinar cells from organ donors to evaluate the transcriptional and pathway profiles during the course of ADM. RESULTS: Following 6 days of three-dimensional culture on Matrigel, acinar cells underwent morphological and molecular changes indicative of ADM. mRNA from 14 donors' paired cells (day 0, acinar phenotype and day 6, ductal phenotype) was subjected to whole transcriptome sequencing. Acinar cell specific genes were significantly downregulated in the samples from the day 6 cultures while ductal cell-specific genes were upregulated. Several regulons of ADM were identified including transcription factors with reduced activity (PTF1A, RBPJL, and BHLHA15) and those ductal and progenitor transcription factors with increased activity (HNF1B, SOX11, and SOX4). Cells with the ductal phenotype contained higher expression of genes increased in pancreatic cancer while cells with an acinar phenotype had lower expression of cancer-associated genes. CONCLUSION: Our findings support the relevancy of human in vitro models to study pancreas cancer pathogenesis and exocrine cell plasticity.
ABSTRACT
Microrheology encompasses a range of methods to measure the mechanical properties of soft materials. By characterizing the motion of embedded microscopic particles, microrheology extends the probing length scale and frequency range of conventional bulk rheology. Microrheology can be characterized into either passive or active methods based on the driving force exerted on probe particles. Tracer particles are driven by thermal energy in passive methods, applying minimal deformation to the assessed medium. In active techniques, particles are manipulated by an external force, most commonly produced through optical and magnetic fields. Small-scale rheology holds significant advantages over conventional bulk rheology, such as eliminating the need for large sample sizes, the ability to probe fragile materials non-destructively, and a wider probing frequency range. More importantly, some microrheological techniques can obtain spatiotemporal information of local microenvironments and accurately describe the heterogeneity of structurally complex fluids. Recently, there has been significant growth in using these minimally invasive techniques to investigate a wide range of biomedical systems both in vitro and in vivo. Here, we review the latest applications and advancements of microrheology in mammalian cells, tissues, and biofluids and discuss the current challenges and potential future advances on the horizon.
ABSTRACT
Biofabrication of tissue models that closely mimic the tumor microenvironment is necessary for high-throughput anticancer therapeutics. Extrusion-based bioprinting of heterogeneous cell-laden hydrogels has shown promise in advancing rapid artificial tissue development. A major bottleneck limiting the rapid production of physiologically relevant tissue models is the current limitation in effectively printing large populations of cells. However, by significantly increasing hydrogel cell-seeding densities, the time required to produce tissues could be effectively reduced. Here, we explore the effects of increasing cell seeding densities on the viscoelastic properties, printability, and cell viability of two different alginate-gelatin hydrogel compositions. Rheological analysis of hydrogels of varying cell seeding densities reveals an inverse relationship between cell concentration and zero-shear viscosity. We also observe that as cell seeding densities increases, the storage moduli decrease, thus lowering the required printing pressures for gel extrusion. We also observe that increasing cell concentration can negatively impact the structural properties of the extruded material by increasing post-print line spreading. We find that hydrogels composed of higher molecular weight alginates and the highest cell-seeding densities (107 cells/mL) yield higher cell viability (>80%) and structural uniformity after printing. The optimized printing parameters determined for the alginate-gelatin bioinks explored may aid in the future rapid fabrication of functional tissue models for therapeutic screening.
Subject(s)
Bioprinting , Gelatin , Gelatin/chemistry , Alginates/chemistry , Hydrogels/chemistry , Rheology , Printing, Three-Dimensional , Tissue Engineering , Tissue Scaffolds/chemistryABSTRACT
Enteric infections are widespread in infants and children living in low-resource settings. Iron availability in the gastrointestinal tract may modify the gut microbiome and impact the incidence and severity of enteropathy. This study was designed to determine the effect of an iron-deplete compared to an iron-rich environment in the lower intestine on the gut microbiome, and whether iron availability in the lower intestine affects the host immune response and severity of enteric infection in young mice. Weanling C57BL/6 female mice were fed an iron deficient (Fe-, <6 ppm iron) or an iron fortified (Fe+, 300 ppm iron) diet for 6 weeks. Mice were pretreated with streptomycin prior to oral inoculation of Salmonella enterica subspecies enterica serovar Typhimurium to induce enteric infection (Sal+) or saline control (Sal-). Cecal iron concentrations were 55-fold greater with Fe+Sal- compared to Fe-Sal-. Microbiome sequencing revealed shifts in gut microbiota with dietary iron and enteric infection. There was â¼30% more S. Typhimurium in the cecum of Fe+Sal+ compared to Fe-Sal+. Plasma hepcidin increased with dietary iron and enteric infection, but was greatest in Fe+Sal+. Plasma lipocalin-2 and spleen size relative to bodyweight were greater in Fe+Sal+ compared to Fe+Sal-, Fe-Sal- and Fe-Sal+, and Fe+Sal+ lost more bodyweight compared to Fe-Sal+. Unabsorbed iron in the lower intestine modifies the gut microbiome and promotes a more severe enteropathy. These findings could suggest the need for alternative iron supplementation strategies in areas where enteric infection are common.
Subject(s)
Enterocolitis , Gastrointestinal Microbiome , Animals , Diet , Disease Models, Animal , Female , Humans , Iron , Iron, Dietary , Mice , Mice, Inbred C57BL , Salmonella typhimuriumABSTRACT
Over the past two decades, there has been a growing body of work on wireless devices that can operate on the length scales of biological cells and even smaller. A class of these devices receiving increasing attention are referred to as bio-hybrid actuators: tools that integrate biological cells or subcellular parts with synthetic or inorganic components. These devices are commonly controlled through magnetic manipulation as magnetic fields and gradients can be generated with a high level of control. Recent work has demonstrated that magnetic bio-hybrid actuators can address common challenges in small scale fabrication, control, and localization. Additionally, it is becoming apparent that these magnetically driven bio-hybrid devices can display high efficiency and, in many cases, have the potential for self-repair and even self-replication. Combining these properties with magnetically driven forces and torques, which can be transmitted over significant distances, can be highly controlled, and are biologically safe, gives magnetic bio-hybrid actuators significant advantages over other classes of small scale actuators. In this review, we describe the theory and mechanisms required for magnetic actuation, classify bio-hybrid actuators by their diverse organic components, and discuss their current limitations. Insights into the future of coupling cells and cell-derived components with magnetic materials to fabricate multi-functional actuators are also provided.
Subject(s)
Robotics , Magnetic Phenomena , MagneticsABSTRACT
Magnetic achiral planar microswimmers can be massively fabricated at low cost and are envisioned to be useful for in vivo biomedical applications. To understand locomotion in representative in vivo environments, we investigated the swimming performance of achiral planar microswimmers in methylcellulose solutions. We observed that these microswimmers displayed very similar swimming characteristics in methylcellulose solutions as in water. Furthermore, this study indicated that the range of precession angles increased as the concentration of MC solution increased. Last, it was demonstrated that achiral planar microswimmers with similar precession angles exhibited nearly the same dimensionless speeds in different concentrations of the methylcellulose solutions. Upon understanding swimmer kinematics, more effective control over the achiral planar microswimmers can be achieved to perform multiple biomedical tasks in in vivo environments.
ABSTRACT
Microscale propulsion impacts a diverse array of fields ranging from biology and ecology to health applications, such as infection, fertility, drug delivery, and microsurgery. However, propulsion in such viscous drag-dominated fluid environments is highly constrained, with time-reversal and geometric symmetries ruling out entire classes of propulsion. Here, we report the spontaneous symmetry-breaking propulsion of rotating spherical microparticles within non-Newtonian fluids. While symmetry analysis suggests that propulsion is not possible along the fore-aft directions, we demonstrate the existence of two equal and opposite propulsion states along the sphere's rotation axis. We propose and experimentally corroborate a propulsion mechanism for these spherical microparticles, the simplest microswimmers to date, arising from nonlinear viscoelastic effects in rotating flows similar to the rod-climbing effect. Similar possibilities of spontaneous symmetry-breaking could be used to circumvent other restrictions on propulsion, revising notions of microrobotic design and control, drug delivery, microscale pumping, and locomotion of microorganisms.
Subject(s)
Elasticity , Magnetic Phenomena , Microspheres , Nonlinear Dynamics , Acrylic Resins/chemistry , Humans , Mucins/chemistry , Mucins/ultrastructure , Rheology , ViscosityABSTRACT
Therapeutic approaches to combat type 1 diabetes (T1D) include donor pancreas transplantation, exogenous insulin administration and immunosuppressive therapies. However, these clinical applications are limited due to insufficient tissue compatible donors, side effects of exogenous insulin administration and/or increased onset of opportunistic infections attributable to induced global immunosuppression. An alternative approach to alleviate disease states is to utilize insulin-producing pancreatic islets seeded in a bioscaffold for implantation into diabetic recipients. The present studies now report that a newly developed cationic polymer biomaterial serves as an efficient bioscaffold for delivery of donor syngeneic pancreatic islet cells to reverse hyperglycemia in murine streptozotocin induced- or non-obese diabetic mouse models of T1D. Intraperitoneal implantation of pancreatic islets seeded within the copolymer bioscaffold supports long-term cell viability, response to extracellular signaling cues and ability to produce soluble factors into the microenvironment. Elevated insulin levels were measured in recipient diabetic mice upon implantation of the islet-seeded biomaterial coupled with reduced blood glucose levels, collectively resulting in increased survival and stabilization of metabolic indices. Importantly, the implanted islet-seeded biomaterial assembled into a solid organoid substructure that reorganized the extracellular matrix compartment and recruited endothelial progenitors for neovascularization. This allowed survival of the graft long-term in vivo and access to the blood for monitoring glucose levels. These results highlight the novelty, simplicity and effectiveness of this biomaterial for tissue regeneration and in vivo restoration of organ functions.
Subject(s)
Hyperglycemia/blood , Insulin/biosynthesis , Islets of Langerhans/metabolism , Organoids , Tissue Culture Techniques , Tissue Scaffolds , Animals , Blood Glucose , Cell Survival , Diabetes Mellitus, Experimental , Diabetes Mellitus, Type 1 , Graft Survival , Hyperglycemia/therapy , Islets of Langerhans Transplantation , MiceABSTRACT
Ovarian cancer is considered to be the most lethal gynecologic malignancy, and despite the development of conventional therapies and new therapeutic approaches, the patient's survival time remains short because of tumor recurrence and metastasis. Therefore, effective methods to control tumor progression are urgently needed. The oncofetal tumor-associated antigen 5T4 (trophoblast glycoprotein, TPBG) represents an appealing target for adoptive T-cell immunotherapy as it is highly expressed on the surface of various tumor cells, has very limited expression in normal tissues, and spreads widely in malignant tumors throughout their development. In this study, we generated second-generation human chimeric antigen receptor (CAR) T cells with redirected specificity to 5T4 (5T4 CAR-T) and demonstrated that these CAR-T cells can elicit lytic cytotoxicity in targeted tumor cells, in addition to the secretion of cytotoxic cytokines, including IFN-γ, IL-2, and GM-CSF. Furthermore, adoptive transfer of 5T4 CAR-T cells significantly delayed tumor formation in xenografts of peritoneal and subcutaneous animal models. These results demonstrate the potential efficacy and feasibility of 5T4 CAR-T cell immunotherapy and provide a theoretical basis for the clinical study of future immunotherapies targeting 5T4 for ovarian cancer.
ABSTRACT
Robotic micro/nanoswimmers can potentially be used as tools for medical applications, such as drug delivery and noninvasive surgery. Recently, achiral microswimmers have gained significant attention because of their simple structures, which enables high-throughput fabrication and size scalability. Here, microparticle image velocimetry (µ-PIV) was used to study the hydrodynamics of achiral microswimmers near a boundary. The structures of these microswimmers resemble the letter L and were fabricated using photolithography and thin-film deposition. Through µ-PIV measurements, the velocity flow fields of the microswimmers rotating at different frequencies were observed. The results herein yield an understanding of the hydrodynamics of the L-shaped microswimmers, which will be useful in applications such as fluidic manipulation.
ABSTRACT
Wirelessly controlled nanoscale robots have the potential to be used for both in vitro and in vivo biomedical applications. So far, the vast majority of reported micro- and nanoscale swimmers have taken the approach of mimicking the rotary motion of helical bacterial flagella for propulsion, and are often composed of monolithic inorganic materials or photoactive polymers. However, currently no man-made soft nanohelix has the ability to rapidly reconfigure its geometry in response to multiple forms of environmental stimuli, which has the potential to enhance motility in tortuous heterogeneous biological environments. Here, we report magnetic actuation of self-assembled bacterial flagellar nanorobotic swimmers. Bacterial flagella change their helical form in response to environmental stimuli, leading to a difference in propulsion before and after the change in flagellar form. We experimentally and numerically characterize this response by studying the swimming of three flagellar forms. Also, we demonstrate the ability to steer these devices and induce flagellar bundling in multi-flagellated nanoswimmers.
Subject(s)
Bacteria/metabolism , Biomimetics/instrumentation , Flagella/metabolism , Nanotechnology/instrumentation , Robotics/instrumentation , Wireless TechnologyABSTRACT
Microorganisms can effectively generate propulsive force at the microscale where viscous forces overwhelmingly dominate inertia forces; bacteria achieve this task through flagellar motion. When swarming bacteria, cultured on agar plates, are blotted onto the surface of a microfabricated structure, a monolayer of bacteria forms what is termed a "bacterial carpet," which generates strong flows due to the combined motion of their freely rotating flagella. Furthermore, when the bacterial carpet coated microstructure is released into a low Reynolds number fluidic environment, the propulsive force of the bacterial carpet is able to give the microstructure motility. In our previous investigations, we demonstrated motion control of these bacteria powered microbiorobots (MBRs). Without any external stimuli, MBRs display natural rotational and translational movements on their own; this MBR self-actuation is due to the coordination of flagella. Here, we investigate the flow fields generated by bacterial carpets, and compare this flow to the flow fields observed in the bulk fluid at a series of locations above the bacterial carpet. Using microscale particle image velocimetry, we characterize the flow fields generated from the bacterial carpets of MBRs in an effort to understand their propulsive flow, as well as the resulting pattern of flagella driven self-actuated motion. Comparing the velocities between the bacterial carpets on fixed and untethered MBRs, it was found that flow velocities near the surface of the microstructure were strongest, and at distances far above, the surface flow velocities were much smaller.