ABSTRACT
This paper presents a first demonstration of range-resolved differential absorption LIDAR (DIAL) measurements of the water vapor main isotopologue H2 16O and the less abundant semi-heavy water isotopologue HD16O with the aim of determining the isotopic ratio. The presented Water Vapor and Isotope Lidar (WaVIL) instrument is based on a parametric laser source emitting nanosecond pulses at 1.98 µm and a direct-detection receiver utilizing a commercial InGaAs PIN photodiode. Vertical profiles of H2 16O and HD16O were acquired in the planetary boundary layer in the suburban Paris region up to a range of 1.5 km. For time averaging over 25 min, the achieved precision in the retrieved water vapor mixing ratio is 0.1 g kg-1 (2.5% relative error) at 0.4 km above ground level (a.g.l.) and 0.6 g kg-1 (20%) at 1 km a.g.l. for 150 m range bins along the LIDAR line of sight. For HD16O, weaker absorption has to be balanced with coarser vertical resolution (600 m range bins) in order to achieve similar relative precision. From the DIAL measurements of H2 16O and HD16O, the isotopic abundance δD was estimated as -51 at 0.4 km above the ground and -119 in the upper part of the boundary layer at 1.3 km a.g.l. Random and systematic errors are discussed in the form of an error budget, which shows that further instrumental improvements are required on the challenging path towards DIAL-profiling of the isotopic abundance with range resolution and precision suitable for water cycle studies.
ABSTRACT
The in situ tests of first ever autonomous aerosol and cloud backscatter LIDAR (light detection and ranging) systems implemented on buoys for Arctic observations has been achieved in 2015 within the French EQUIPEX IAOOS project. The environmental and operational constraints were met by adopting a concept of a fibered microjoule lidar system using a laser diode. Two systems have been developed with and without polarization analysis capability. A specific optical design was used for polarization discrimination. These systems were integrated in buoys and tested in the Arctic in 2014 and 2015 at latitudes higher than 80°N. Data were transmitted through an Iridium space link. Measurements have been obtained 90% of the time from the non-polarized system in 2014 over 8 months as the first fully equipped buoy drifted from the Barneo Russian camp close to the North Pole toward Svalbard. A polarized system was then tested over a short period in winter 2015 north of Svalbard during the Norwegian campaign N-ICE. In April and May 2014, the unattended lidar measurements showed a large occurrence of aerosols and haze. The average attenuated scattering ratio for non-cloudy profiles during this period was about 2.2. Aerosols could reach an altitude of 5km on average, whereas over the rest of the period low level clouds (below 1000 m) were prevailing with an average attenuated scattering ratio of about 103. The main features of the developed lidar instruments and first results are presented here.