ABSTRACT
Many of the immune and metabolic changes occurring during normal pregnancy also describe metabolic syndrome. Gut microbiota can cause symptoms of metabolic syndrome in nonpregnant hosts. Here, to explore their role in pregnancy, we characterized fecal bacteria of 91 pregnant women of varying prepregnancy BMIs and gestational diabetes status and their infants. Similarities between infant-mother microbiotas increased with children's age, and the infant microbiota was unaffected by mother's health status. Gut microbiota changed dramatically from first (T1) to third (T3) trimesters, with vast expansion of diversity between mothers, an overall increase in Proteobacteria and Actinobacteria, and reduced richness. T3 stool showed strongest signs of inflammation and energy loss; however, microbiome gene repertoires were constant between trimesters. When transferred to germ-free mice, T3 microbiota induced greater adiposity and insulin insensitivity compared to T1. Our findings indicate that host-microbial interactions that impact host metabolism can occur and may be beneficial in pregnancy.
Subject(s)
Feces/microbiology , Gastrointestinal Tract/microbiology , Metagenome , Pregnancy , Actinobacteria/isolation & purification , Animals , Female , Germ-Free Life , Humans , Infant , Metabolic Syndrome/microbiology , Mice , Proteobacteria/isolation & purificationABSTRACT
This study is a continuation by the Environmental Biotechnology Group of the University of Tübingen in memoriam to Reinhard Wirth, who initiated the work on Mth60 fimbriae at the University of Regensburg. Growth in biofilms or biofilm-like structures is the prevailing lifestyle for most microbes in nature. The first crucial step to initiate biofilms is the adherence of microbes to biotic and abiotic surfaces. Therefore, it is crucial to elucidate the initial step of biofilm formation, which is generally established through cell-surface structures (i.e., cell appendages), such as fimbriae or pili, that adhere to biotic and abiotic surfaces. The Mth60 fimbriae of Methanothermobacter thermautotrophicus ΔH are one of only a few known archaeal cell appendages that do not assemble via the type IV pili assembly mechanism. Here, we report the constitutive expression of Mth60 fimbria-encoding genes from a shuttle-vector construct and the deletion of the Mth60 fimbria-encoding genes from the genomic DNA of M. thermautotrophicus ΔH. For this, we expanded our system for genetic modification of M. thermautotrophicus ΔH using an allelic-exchange method. While overexpression of the respective genes increased the number of Mth60 fimbriae, deletion of the Mth60 fimbria-encoding genes led to a loss of Mth60 fimbriae in planktonic cells of M. thermautotrophicus ΔH compared to the wild-type strain. This, either increased or decreased, number of Mth60 fimbriae correlated with a significant increase or decrease of biotic cell-cell connections in the respective M. thermautotrophicus ΔH strains compared to the wild-type strain. IMPORTANCE Methanothermobacter spp. have been studied for the biochemistry of hydrogenotrophic methanogenesis for many years. However, a detailed investigation of certain aspects, such as regulatory processes, was impossible due to the lack of genetic tools. Here, we amend our genetic toolbox for M. thermautotrophicus ΔH with an allelic exchange method. We report the deletion of genes that encode the Mth60 fimbriae. Our findings provide the first genetic evidence of whether the expression of these genes underlies regulation and reveal a role of the Mth60 fimbriae in the formation of cell-cell connections of M. thermautotrophicus ΔH.
Subject(s)
Biofilms , Fimbriae, Bacterial , Fimbriae, Bacterial/genetics , Methanobacteriaceae/genetics , Methanobacteriaceae/metabolismABSTRACT
Medium-chain carboxylic acids (MCCAs) are valuable platform chemicals and can be produced from waste biomass sources or syngas fermentation effluent through microbial chain elongation. We have previously demonstrated successful approaches to separate >90% purity oil with different MCCAs (MCCA oil) by integrating the anaerobic bioprocess with membrane-based liquid-liquid extraction (pertraction) and membrane electrolysis. However, two-compartment membrane electrolysis unit without pertraction was not able to separate MCCA oil. Therefore, we developed a five-compartment electrodialysis/phase separation cell (ED/PS). First, we tested an ED/PS cell in series with pertraction and achieved a maximum MCCA-oil flux of 1.7 × 103 g d-1 per projected area (m2) (19 mL oil d-1) and MCCA-oil transfer efficiency [100% × moles MCCA-oil moles electrons-1] of 74% at 15 A m-2. This extraction system at 15 A m-2 demonstrated a â¼10 times lower electric-power consumption (1.1 kWh kg-1 MCCA oil) than membrane electrolysis in series with pertraction (9.9 kWh kg-1 MCCA oil). Second, we evaluated our ED/PS as a stand-alone unit when integrated with the anaerobic bioprocess and demonstrated that we can selectively extract and separate MCCA oil directly from chain-elongating bioreactor broth with just an abiotic electrochemical cell. However, the electric-power consumption increased considerably due to the lower MCCA concentrations in the bioreactor broth compared to the pertraction broth.
Subject(s)
Bioreactors , Carboxylic Acids , Biomass , Electrolysis , FermentationABSTRACT
The mechanism of long-distance electron transfer via redox-active particulate natural organic matter (NOM) is still unclear, especially considering its aggregated nature and the resulting low diffusivity of its quinone- and hydroquinone-containing molecules. Here we conducted microbial iron(III) mineral reduction experiments in which anthraquinone-2,6-disulfonate (AQDS, a widely used analogue for quinone- and hydroquinone-containing molecules in NOM) was immobilized in agar to achieve a spatial separation between the iron-reducing bacteria and ferrihydrite mineral. Immobilizing AQDS in agar also limited its diffusion, which resembled electron-transfer behavior of quinone- and hydroquinone-containing molecules in particulate NOM. We found that, although the diffusion coefficient of the immobilized AQDS/AH2QDS was 10 times lower in agar than in water, the iron(III) mineral reduction rate (1.60 ± 0.28 mmol L-1 Fe(II) d-1) was still comparable in both media, indicating the existence of another mechanism that accelerated the electron transfer under low diffusive conditions. We found the correlation between the heterogeneous electron-transfer rate constant (10-3 cm s-1) and the diffusion coefficient (10-7 cm2 s-1) fitting well with the "diffusion-electron hopping" model, suggesting that electron transfer via the immobilized AQDS/AH2QDS couple was accomplished through a combination of diffusion and electron hopping. Electron hopping increased the diffusion concentration gradient up to 106-fold, which largely promoted the overall electron-transfer rate during microbial iron(III) mineral reduction. Our results are helpful to explain the electron-transfer mechanisms in particulate NOM.
Subject(s)
Ferric Compounds , Iron , Anthraquinones , Electrons , Hydroquinones , Minerals , Oxidation-Reduction , QuinonesABSTRACT
Redox-active organic molecules such as anthraquinone-2,6-disulfonate (AQDS) and natural organic matter (NOM) can act as electron shuttles thus facilitating electron transfer from Fe(III)-reducing bacteria (FeRB) to terminal electron acceptors such as Fe(III) minerals. In this research, we examined the length scale over which this electron shuttling can occur. We present results from agar-solidified experimental incubations, containing either AQDS or NOM, where FeRB were physically separated from ferrihydrite or goethite by 2 cm. Iron speciation and concentration measurements coupled to a diffusion-reaction model highlighted clearly Fe(III) reduction in the presence of electron shuttles, independent of the type of FeRB. Based on our fitted model, the rate of ferrihydrite reduction increased from 0.07 to 0.19 µmol d-1 with a 10-fold increase in the AQDS concentration, highlighting a dependence of the reduction rate on the electron-shuttle concentration. To capture the kinetics of Fe(II) production, the effective AQDS diffusion coefficient had to be increased by a factor of 9.4. Thus, we postulate that the 2 cm electron transfer was enabled by a combination of AQDS molecular diffusion and an electron hopping contribution from reduced to oxidized AQDS molecules. Our results demonstrate that AQDS and NOM can drive microbial Fe(III) reduction across 2 cm distances and shed light on the electron transfer process in natural anoxic environments.
Subject(s)
Anthraquinones , Ferric Compounds , Electron Transport , Iron , Minerals , Oxidation-ReductionABSTRACT
The antibiotic monensin is fed to dairy cows to increase milk production efficiency. A fraction of this monensin is excreted into the cow manure. Previous studies have found that cow manure containing monensin can negatively impact the performance of anaerobic digesters, especially upon first introduction. Few studies have examined whether the anaerobic digester microbiome can adapt to monensin during the operating time. Here, we conducted a long-term time series study of four lab-scale anaerobic digesters fed with cow manure. We examined changes in both the microbiome composition and function of the anaerobic digesters when subjected to the dairy antibiotic monensin. In our digesters, monensin was not rapidly degraded under anaerobic conditions. The two anaerobic digesters that were subjected to manure from monensin feed-dosed cows exhibited relatively small changes in microbiome composition and function due to relatively low monensin concentrations. At higher concentrations of monensin, which we dosed directly to control manure (from dairy cows without monensin), we observed major changes in the microbiome composition and function of two anaerobic digesters. A rapid introduction of monensin to one of these anaerobic digesters led to the impairment of methane production. Conversely, more gradual additions of the same concentrations of monensin to the other anaerobic digester led to the adaptation of the anaerobic digester microbiomes to the relatively high monensin concentrations. A member of the candidate OP11 (Microgenomates) phylum arose in this anaerobic digester and appeared to be redundant with certain Bacteroidetes phylum members, which previously were dominating.IMPORTANCE Monensin is a common antibiotic given to dairy cows in the United States and is partly excreted with dairy manure. An improved understanding of how monensin affects the anaerobic digester microbiome composition and function is important to prevent process failure for farm-based anaerobic digesters. This time series study demonstrates how anaerobic digester microbiomes are inert to low monensin concentrations and can adapt to relatively high monensin concentrations by redundancy in an already existing population. Therefore, our work provides further insight into the importance of microbiome redundancy in maintaining the stability of anaerobic digesters.
Subject(s)
Anti-Bacterial Agents/pharmacology , Manure/microbiology , Microbiota/drug effects , Monensin/pharmacology , Anaerobiosis , Animals , Bacteria/metabolism , Bioreactors , Cattle/microbiology , Cattle/physiology , Dairying , Digestion , Female , Methane/metabolismABSTRACT
Syngas fermentation to ethanol and acetate has recently been coupled to microbial chain elongation to produce medium-chain carboxylates, including n-caproate and n-caprylate. These medium-chain carboxylates are relatively hydrophobic, and thus easier to extract from solution than miscible ethanol. Here, we examined the effect of 11 different ethanol-to-acetate substrate ratios (ranging from 1.8 to 275 g COD g COD-1 [1.2 to 183 mol mol-1]) on directing chain elongation toward n-caprylate in a 0.7-L upflow anaerobic filter with product extraction. During an eight-month operating period, we monitored the performance and characterized the microbiome composition of this chain-elongating bioreactor. We also developed a thermodynamic model to predict the favorability of n-caprylate production at different substrate ratios. As predicted by our model, higher ethanol-to-acetate substrate ratios fed to our bioreactor led to higher specificities for n-caprylate production. We observed that feeding primarily ethanol to the bioreactor (i.e., ethanol-to-acetate substrate ratio of 275 g COD g COD-1) resulted in the highest specificity for n-caprylate, but the n-caprylate production rate decreased at this high ratio, resulting in lower conversion efficiencies. Thus, care should be taken not to overload the system with primarily ethanol as the substrate and to lower the organic loading rate.
Subject(s)
Caprylates , Ethanol , Acetic Acid , Bioreactors , FermentationABSTRACT
Pyrogenic carbon contains redox-active functional groups and polyaromatic carbon matrices that are both capable of transferring electrons. Several techniques have been explored to characterize the individual electron transfer process of either functional groups or carbon matrices individually. However, simultaneous analysis of both processes remains challenging. Using an approach that employs a four-electrode configuration and dual-interface electron transfer detection, we distinguished the electron transfer by functional groups from the electron transfer by carbon matrices and simultaneously quantified their relative contribution to the total electron transfer to and from pyrogenic carbon. Results show that at low to intermediate pyrolysis temperatures (400-500 °C), redox cycling of functional groups is the major mechanism with a contribution of 100-78% to the total electron transfer; whereas at high temperatures (650-800 °C), direct electron transfer of carbon matrices dominates electron transfer with a contribution of 87-100%. Spectroscopic and diffraction analyses of pyrogenic carbon support the electrochemical measurements by showing a molecular-level structural transition from an enrichment in functional groups to an enrichment in nanosized graphene domains with increasing pyrolysis temperatures. The method described in this study provides a new analytical approach to separately quantify the relative importance of different electron transfer pathways in natural pyrogenic carbon and has potential applications for engineered carbon materials such as graphene oxides.
Subject(s)
Carbon , Graphite , Electron Transport , Electrons , Oxidation-ReductionABSTRACT
A previous study had reported that the Fenton reaction at full scale increased the digestibility of thickened sludge in a digester. The authors of the study had observed a positive effect on biogas productivity, but without a control. Here, we evaluated this result by investigating the anaerobic treatment characteristics of fresh, thickened sludge in an experimental design with a control. To accomplish this, two identical continuously stirred anaerobic digesters (CSADs) were operated in parallel at mesophilic conditions. We also included anaerobic settlers to mimic the full-scale plant and to accomplish sludge recycling. We fed fresh, thickened sludge to both setups once every other day, but performed the Fenton reaction with only the experimental system by adding H2O2 to the recycled biosolids from the anaerobic settler. We observed very large fluctuations in biogas production due to ever-changing characteristics of the thickened sludge both on a daily and seasonal basis. Regardless, the two setups performed almost identically with: 1) chemical oxygen demand removal efficiencies of 63.8 ± 2.9% and 62.1 ± 3.2%; and 2) biogas productivities of 0.280 and 0.279 L CH4·g-1 volatile solids for the experimental (with Fenton) and control (without Fenton) CSADs, respectively. These results indicate that the use of a Fenton reaction did not affect biogas productivities.
Subject(s)
Waste Disposal, Fluid/methods , Anaerobiosis , Bioreactors , Hydrogen Peroxide , Methane , Sewage , WastewaterABSTRACT
Discovering new ways to inactivate pathogens in human waste is critical for the improvement of worldwide access to sanitation and for the reduction of the environmental impact of conventional waste treatment processes. Here, we utilized the carboxylate platform and chain elongation to produce n-butyric acid and n-caproic acid via the anaerobic fermentation of human fecal material. Then, we inactivated Ascaris eggs through exposure to these carboxylic acids. Using batch experiments with human fecal material as substrate, we accumulated n-butyric acid and n-caproic acid at total concentrations (uncharged acid plus conjugate base) of 257 and 27.1 mM, respectively. We then showed that carboxylic acids at these concentrations inactivated Ascaris eggs when the pH was below the pKa for the acids, causing them to exist primarily in the uncharged forms. We observed that uncharged carboxylic acids affected viability rather than the pH itself or conjugate bases. In addition, we modeled the viability of Ascaris eggs as a function of uncharged carboxylic acid concentration for n-butyric acid and n-caproic acid at exposure times of 2, 6, 12, and 20 days. The results presented here indicate that in situ biological production of carboxylic acids in HFM provides a promising method of pathogen inactivation and may lead to new developments in sanitation technology and treatment of fecal sludge.
Subject(s)
Ascaris , Carboxylic Acids/chemistry , Sewage/microbiology , Animals , Caproates , Humans , Ovum , Water PurificationABSTRACT
Metagenomes derived from environmental microbiota encode a vast diversity of protein homologs. How this diversity impacts protein function can be explored through selection assays aimed to optimize function. While artificially generated gene sequence pools are typically used in selection assays, their usage may be limited because of technical or ethical reasons. Here, we investigate an alternative strategy, the use of soil microbial DNA as a starting point. We demonstrate this approach by optimizing the function of a widely occurring soil bacterial enzyme, 1-aminocyclopropane-1-carboxylate (ACC) deaminase. We identified a specific ACC deaminase domain region (ACCD-DR) that, when PCR amplified from the soil, produced a variant pool that we could swap into functional plasmids carrying ACC deaminase-encoding genes. Functional clones of ACC deaminase were selected for in a competition assay based on their capacity to provide nitrogen to Escherichia coli in vitro. The most successful ACCD-DR variants were identified after multiple rounds of selection by sequence analysis. We observed that previously identified essential active-site residues were fixed in the original unselected library and that additional residues went to fixation after selection. We identified a divergent essential residue whose presence hints at the possible use of alternative substrates and a cluster of neutral residues that did not influence ACCD performance. Using an artificial ACCD-DR variant library generated by DNA oligomer synthesis, we validated the same fixation patterns. Our study demonstrates that soil metagenomes are useful starting pools of protein-coding-gene diversity that can be utilized for protein optimization and functional characterization when synthetic libraries are not appropriate.
Subject(s)
Alleles , Carbon-Carbon Lyases/isolation & purification , Carbon-Carbon Lyases/metabolism , Genetic Testing/methods , Metagenomics/methods , Rhizosphere , Soil Microbiology , Carbon-Carbon Lyases/genetics , Escherichia coli/growth & development , Escherichia coli/metabolism , Nitrogen/metabolismABSTRACT
Syngas fermentation is an anaerobic bioprocess that could become industrially relevant as a biorefinery platform for sustainable production of fuels and chemicals. An important prerequisite for commercialization is adequate performance of the biocatalyst (i.e., sufficiently high production rate, titer, selectivity, yield, and stability of the fermentation). Here, we compared the performance of three potential candidate Clostridium strains in syngas-to-ethanol conversion: Clostridium ljungdahlii PETC, C. ljungdahlii ERI-2, and Clostridium autoethanogenum JA1-1. Experiments were conducted in a two-stage, continuously fed syngas-fermentation system that had been optimized for stable ethanol production. The two C. ljungdahlii strains performed similar to each other but different from C. autoethanogenum. When the pH value was lowered from 5.5 to 4.5 to induce solventogenesis, the cell-specific carbon monoxide and hydrogen consumption (similar rate for all strains at pH 5.5), severely decreased in JA1-1, but hardly in PETC and ERI-2. Ethanol production in strains PETC and ERI-2 remained relatively stable while the rate of acetate production decreased, resulting in a high ethanol/acetate ratio, but lower overall productivities. With JA1-1, lowering the pH severely lowered rates of both ethanol and acetate production; and as a consequence, no pronounced shift to solventogenesis was observed. The highest overall ethanol production rate of 0.301 g · L(-1) · h(-1) was achieved with PETC at pH 4.5 with a corresponding 19 g/L (1.9% w/v) ethanol concentration and a 5.5:1 ethanol/acetate molar ratio. A comparison of the genes relevant for ethanol metabolism revealed differences between C. ljungdahlii and C. autoethanogenum that, however, did not conclusively explain the different phenotypes.
Subject(s)
Biofuels , Carbon Monoxide/metabolism , Clostridium/metabolism , Ethanol/metabolism , Hydrogen/metabolism , Anaerobiosis , Biotransformation , Clostridium/genetics , Fermentation , Hydrogen-Ion Concentration , Metabolic Networks and Pathways/geneticsABSTRACT
Chain elongation into medium-chain carboxylates, such as n-caproate and n-caprylate, with ethanol as an electron donor and with open cultures of microbial consortia (i.e., reactor microbiomes) under anaerobic conditions is being developed as a biotechnological production platform. The goal is to use the high thermodynamic efficiency of anaerobic fermentation to convert organic biomass or organic wastes into valuable biochemicals that can be extracted. Several liter-scale studies have been completed and a first pilot-plant study is underway. However, the underlying microbial pathways are not always well understood. In addition, an interdisciplinary approach with knowledge from fields ranging from microbiology and chemical separations to biochemistry and environmental engineering is required. To bring together research from different fields, we reviewed the literature starting with the microbiology and ending with the bioprocess engineering studies that already have been performed. Because understanding the microbial pathways is so important to predict and steer performance, we delved into a stoichiometric and thermodynamic model that sheds light on the effect of substrate ratios and environmental conditions on product formation. Finally, we ended with an outlook.
Subject(s)
Bioreactors/microbiology , Microbiota , Organic Chemicals/metabolism , Bacteria/classification , Bacteria/metabolism , Fermentation , Organic Chemicals/chemistryABSTRACT
Multifunctional reactor microbiomes can elongate short-chain carboxylic acids (SCCAs) to medium-chain carboxylic acids (MCCAs), such as n-caproic acid. However, it is unclear whether this microbiome biotechnology platform is stable enough during long operating periods to consistently produce MCCAs. During a period of 550 days, we improved the operating conditions of an anaerobic bioreactor for the conversion of complex yeast-fermentation beer from the corn kernel-to-ethanol industry into primarily n-caproic acid. We incorporated and improved in-line, membrane liquid-liquid extraction to prevent inhibition due to undissociated MCCAs at a pH of 5.5 and circumvented the addition of methanogenic inhibitors. The microbiome accomplished several functions, including hydrolysis and acidogenesis of complex organic compounds and sugars into SCCAs, subsequent chain elongation with undistilled ethanol in beer, and hydrogenotrophic methanogenesis. The methane yield was 2.40 ± 0.52% based on COD and was limited by the availability of carbon dioxide. We achieved an average n-caproate production rate of 3.38 ± 0.42 g L(-1) d(-1) (7.52 ± 0.94 g COD L(-1) d(-1)) with an n-caproate yield of 70.3 ± 8.81% and an n-caproate/ethanol ratio of 1.19 ± 0.15 based on COD for a period of â¼55 days. The maximum production rate was achieved by increasing the organic loading rates in tandem with elevating the capacity of the extraction system and a change in the complex feedstock batch.
Subject(s)
Bioreactors , Biotechnology/methods , Caproates/metabolism , Beer/microbiology , Biological Oxygen Demand Analysis , Bioreactors/microbiology , Biotechnology/instrumentation , Ethanol/metabolism , Fermentation , Hydrolysis , Liquid-Liquid Extraction , Methane/analysis , Methane/metabolism , Yeasts/metabolismABSTRACT
Production of competitive microalgal biofuels requires development of high volumetric productivity photobioreactors (PBRs) capable of supporting high-density cultures. Maximal biomass density supported by the current PBRs is limited by nonuniform distribution of light as a result of self-shading effects. We recently developed a thin-light-path stacked photobioreactor with integrated slab waveguides that distributed light uniformly across the volume of the PBR. Here, we enhance the performance of the stacked waveguide photobioreactor (SW-PBR) by determining the optimal wavelength and intensity regime of the incident light. This enabled the SW-PBR to support high-density cultures, achieving a carrying capacity of OD730 20. Using a genetically modified algal strain capable of secreting ethylene, we improved ethylene production rates to 937 µg L(-1) h(-1). This represents a 4-fold improvement over a conventional flat-plate PBR. These results demonstrate the advantages of the SW-PBR design and provide the optimal operational parameters to maximize volumetric production.
Subject(s)
Biofuels , Biomass , Photobioreactors , Ethylenes/analysis , Ethylenes/metabolism , Microalgae/growth & development , Microalgae/metabolismABSTRACT
Azo dyes are the most widely used coloring agents in the textile industry, but are difficult to treat. When textile effluents are discharged into waterways, azo dyes and their degradation products are known to be environmentally toxic. An electrochemical system consisting of a graphite-plate anode and a stainless-steel mesh cathode was placed into a lab-scale anaerobic bioreactor to evaluate the removal of an azo dye (Direct Black 22) from synthetic textile wastewater. At applied potentials of 2.5 and 3.0 V when water electrolysis occurs, no improvement in azo dye removal efficiency was observed compared to the control reactor (an integrated system with electrodes but without an applied potential). However, applying such electric potentials produces oxygen via electrolysis and promoted the aerobic degradation of aromatic amines, which are toxic, intermediate products of anaerobic azo dye degradation. The removal of these amines indicates a decrease in overall toxicity of the effluent from a single-stage anaerobic bioreactor, which warrants further optimization in anaerobic digestion.
Subject(s)
Azo Compounds/isolation & purification , Coloring Agents/isolation & purification , Naphthalenes/isolation & purification , Water Pollutants, Chemical/isolation & purification , Amines/chemistry , Anaerobiosis , Azo Compounds/chemistry , Biodegradation, Environmental , Bioreactors , Coloring Agents/chemistry , Electrodes , Electrolysis , Humans , Naphthalenes/chemistry , Oxygen/chemistry , Textile Industry , Waste Disposal, Fluid , Water Pollutants, Chemical/chemistry , Water Purification/methodsABSTRACT
The objective of this research was to test the effectiveness of conductive cooling in alleviating heat stress of lactating dairy cows. A conductive cooling system was built with waterbeds (Dual Chamber Cow Waterbeds, Advanced Comfort Technology Inc., Reedsburg, WI) modified to circulate chilled water. The experiment lasted 7 wk. Eight first-lactation Holstein cows producing 34.4±3.7kg/d of milk at 166±28 d in milk were used in the study. Milk yield, dry matter intake (DMI), and rectal temperature were recorded twice daily, and respiration rate was recorded 5 times per day. During wk 1, the cows were not exposed to experimental heat stress or conductive cooling. For the remaining 6 wk, the cows were exposed to heat stress from 0900 to 1700h each day. During these 6 wk, 4 of the 8 cows were cooled with conductive cooling (experimental cows), and the other 4 were not cooled (control cows). The study consisted of 2 thermal environment exposures (temperature-humidity index mean ± standard deviation of 80.7±0.9 and 79.0±1.0) and 2 cooling water temperatures (circulating water through the water mattresses at temperatures of 4.5°C and 10°C). Thus, a total of 4 conductive cooling treatments were tested, with each treatment lasting 1 wk. During wk 6, the experimental and control cows were switched and the temperature-humidity index of 79.0±1.0 with 4.5°C cooling water treatment was repeated. During wk 7, waterbeds were placed directly on concrete stalls without actively cooling the water. Least squares means and P-values for the different treatments were calculated with multivariate mixed models. Conductively cooling the cows with 4.5°C water decreased rectal temperature by 1.0°C, decreased respiration rate by 18 breaths/min, increased milk yield by 5%, and increased DMI by 14% compared with the controls. When the results from the 2 cooling water temperatures (4.5°C and 10°C circulating water) were compared, we found that the rectal temperature from 4.5°C cooling water was 0.3°C lower than the rectal temperature with 10°C cooling water, but the other measurements (respiration rate, milk production, and DMI) did not show a statistically significant difference between the cooling water temperatures. Placing waterbeds on concrete stalls without additional cooling did not have a measurable effect in alleviating the heat stress of the cows.
Subject(s)
Bedding and Linens/veterinary , Cattle Diseases/prevention & control , Dairying/methods , Heat Stress Disorders/veterinary , Animals , Body Temperature , Cattle , Cattle Diseases/etiology , Cattle Diseases/physiopathology , Female , Heat Stress Disorders/etiology , Heat Stress Disorders/physiopathology , Heat Stress Disorders/prevention & control , Lactation , Random AllocationABSTRACT
The objective of this work was to compare two different high-rate anaerobic bioreactor configurations--the anaerobic sequencing batch reactor (ASBR) and the upflow anaerobic solid removal (UASR) reactor--for the treatment of a solid-rich organic wastewater with a high strength. The two, 4.5-L reactors were operated in parallel for close to 100 days under mesophilic conditions (37°C) with non-granular biomass by feeding a pumpkin wastewater with â¼4% solids. The organic loading rate of pumpkin wastewater was increased periodically to a maximum of 8â gâ CODâ L(-1)â d(-1) by shortening the hydraulic retention time to 5.3 days. Compositional analysis of pumpkin wastewater revealed deficiencies in the trace metal cobalt and alkalinity. With supplementation, the ASBR outperformed the UASR reactor with total chemical oxygen demand (COD) removal efficiencies of 64% and 53%, respectively, achieving a methane yield of 0.27 and 0.20â Lâ CH4â g(-1) COD fed to the ASBR and UASR, respectively. The better performance realized with the ASBR and this specific wastewater was attributed to its semi-batch, dynamic operating conditions rather than the continuous operating conditions of the UASR reactor.
Subject(s)
Bacteria, Anaerobic/metabolism , Bioreactors/microbiology , Cucurbita/microbiology , Wastewater/microbiology , Water Pollutants, Chemical/metabolism , Water Purification/instrumentation , Equipment Design , Equipment Failure Analysis , Garbage , Wastewater/analysis , Water Pollutants, Chemical/isolation & purification , Water Purification/methodsABSTRACT
Anaerobic digesters rely on the diversity and distribution of parallel metabolic pathways mediated by complex syntrophic microbial communities to maintain robust and optimal performance. Using mesophilic swine waste digesters, we experimented with increased ammonia loading to induce a shift from aceticlastic methanogenesis to an alternative acetate-consuming pathway of syntrophic acetate oxidation. In comparison with control digesters, we observed shifts in bacterial 16S rRNA gene content and in functional gene repertoires over the course of the digesters' 3-year operating period. During the first year, under identical startup conditions, all bioreactors mirrored each other closely in terms of bacterial phylotype content, phylogenetic structure, and evenness. When we perturbed the digesters by increasing the ammonia concentration or temperature, the distribution of bacterial phylotypes became more uneven, followed by a return to more even communities once syntrophic acetate oxidation had allowed the experimental bioreactors to regain stable operation. The emergence of syntrophic acetate oxidation coincided with a partial shift from aceticlastic to hydrogenotrophic methanogens. Our 16S rRNA gene analysis also revealed that acetate-fed enrichment experiments resulted in communities that did not represent the bioreactor community. Analysis of shotgun sequencing of community DNA suggests that syntrophic acetate oxidation was carried out by a heterogeneous community rather than by a specific keystone population with representatives of enriched cultures with this metabolic capacity.
Subject(s)
Acetates/metabolism , Ammonia/metabolism , Bacteria/classification , Bacteria/metabolism , Bioreactors/microbiology , Biota/drug effects , Animals , Cluster Analysis , DNA, Bacterial/chemistry , DNA, Bacterial/genetics , DNA, Ribosomal/chemistry , DNA, Ribosomal/genetics , Feces/microbiology , Hydrogen/metabolism , Methane/metabolism , Molecular Sequence Data , Oxidation-Reduction , Phylogeny , RNA, Ribosomal, 16S/genetics , Sequence Analysis, DNA , SwineABSTRACT
Many bioelectrochemical systems (BESs) harness the ability of electrode-active microbes to catalyze reactions between electrodes and chemicals, often to perform useful functions such as wastewater treatment, fuel production, and biosensing. A microbial fuel cell (MFC) is one type of BES, which generates electric power through microbial respiration with an anode as the electron acceptor, and typically with oxygen reduction at the cathode to provide the terminal electron acceptor. Oxygen intrusion into MFCs is typically viewed as detrimental because it competes with anodes for electrons and lowers the coulombic efficiency. However, recent evidence suggests that it does not necessarily lead to lower performancesparticularly for the model organism Shewanella oneidensis MR-1. Because flavin-mediated electron transfer is important for Shewanella species, which can produce this electron shuttle endogenuously, we investigated the role of flavins in the performance of pure-culture BESs with S. oneidensis MR-1 with and without oxygen. We found that oxygen increases current production more than twofold under continuously fed conditions, but only modestly increases current production under batch-fed conditions.We hypothesized that oxygen is more beneficial under continuously fed conditions because it allows S. oneidensis to grow and produce flavins at a faster rate, and thus lowers flavin washout. Our conclusions were supported by experiments with a flavin-secretion deficient mutant of S. oneidensis.