Perovskite Bifunctional Diode with High Photovoltaic and Electroluminescent Performance by Holistic Defect Passivation.

Integration of photovoltaic (PV) and electroluminescent (EL) functions and/or units in one device is attractive for new generation optoelectronic devices but it is challenging to achieve highly comprehensive efficiency. Herein, perovskite solar cells (PSCs) are fabricated, assisted by 3-sulfopropyl methacrylate potassium salt (SPM) additive to tackle this issue. SPMs not only induce large grain size during the film formation but also produce a secondary phase of 2D K2 PbI4 to passivate the grain boundaries (GBs). In addition, its sulfonic acid group and potassium ion can coordinate to lead ion and fill the interstitial defects, respectively. Thus, SPM reduces the defective states and suppresses nonradiative recombination loss. As a result, planar PSC delivers a power conversion efficiency of ≈22%, with a maximum open-circuit voltage (Voc ) of 1.20 V. The Voc is 94% of the radiative Voc limit (1.28 V), higher than the control device (Voc of 1.12 V). In addition, the reciprocity between PV and EL is also correlated to quantify the energy losses and understand the device physics. When operated as a light-emitting diode, the maximum EL external quantum efficiency (EQEEL ) is up to 12.2% (EQEEL of 10.7% under an injection current of short-circuit photocurrent), thus leading to high-performance PV/EL dual functions.

Reciprocally Photovoltaic Light-Emitting Diode Based on Dispersive Perovskite Nanocrystal.

Integrating highly efficient photovoltaic (PV) function into light-emitting diodes (LEDs) for multifunctional display is of great significance for compact low-power electronics, but it remains challenging. Herein, it is demonstrated that solution engineered perovskite nanocrystals (PNCs, ≈100 nm) enable efficient electroluminescence (EL) and PV performance within a single device through tailoring the dispersity and interface. It delivers the maximum brightness of 490 W sr-1  m-2 at 2.7 V and 23.2% EL external quantum efficiency, a record value for near-infrared perovskite LED, as well as 15.23% PV efficiency, among the highest value for nanocrystal perovskite solar cells. The PV-EL performance is well in line with the reciprocity relation. These all-solution-processed PV-LED devices open up viable routes to a variety of advanced applications, from touchless interactive screens to energy harvesting displays and data communication.

Surface-Effect-Induced Optical Bandgap Shrinkage in GaN Nanotubes.

We investigate nontrivial surface effects on the optical properties of self-assembled crystalline GaN nanotubes grown on Si substrates. The excitonic emission is observed to redshift by ∼100 meV with respect to that of bulk GaN. We find that the conduction band edge is mainly dominated by surface atoms, and that a larger number of surface atoms for the tube is likely to increase the bandwidth, thus reducing the optical bandgap. The experimental findings can have important impacts in the understanding of the role of surfaces in nanostructured semiconductors with an enhanced surface/volume ratio.

Dual-Band Emission from Intrinsic and Extrinsic Self-Trapped Excitons in a Zero-Dimensional Copper Halide Cs3Cu2Br5.

Zero-dimensional Cs3Cu2X5 (X=Cl, Br, or I), the intensively studied light-emitting materials, generally exhibit single-band emissions from intrinsic self-trapped excitons (STEs), while defect-induced (extrinsic) STEs were considered nonemissive. Herein, we observed a dual-band emission from intrinsic and extrinsic STEs for Cs3Cu2Br5 at low temperature, and their emission mechanisms are elucidated. The intrinsic and extrinsic STEs are trapped from different initial states, with remarkably large trapping depths (>900 meV) evaluated at 50 K, indicating their negligible detrapping rates. In addition, the stronger electron-phonon coupling for extrinsic STE could shift the extrinsic STE band to intersect with the ground state in the configuration coordinate diagram, acting as a nonradiative pathway. This explains the vanishment of extrinsic STE emission at room temperature and the reported low photoluminescence quantum yields (<50%). With growing efforts to obtain multiple-band emitters, our insights into the emission mechanisms of intrinsic and extrinsic STEs provide valuable bases for further material engineering.

Slow Hot-Exciton Cooling and Enhanced Interparticle Excitonic Coupling in HgTe Quantum Dots.

Rapid hot-carrier/exciton cooling constitutes a major loss channel for photovoltaic efficiency. How to decelerate the hot-carrier/exciton relaxation remains a crux for achieving high-performance photovoltaic devices. Here, we demonstrate slow hot-exciton cooling that can be extended to hundreds of picoseconds in colloidal HgTe quantum dots (QDs). The energy loss rate is 1 order of magnitude smaller than bulk inorganic semiconductors, mediated by phonon bottleneck and interband biexciton Auger recombination (BAR) effects, which are both augmented at reduced QD sizes. The two effects are competitive with the emergence of multiple exciton generation. Intriguingly, BAR dominates even under low excitation fluences with a decrease in interparticle distance. Both experimental evidence and numerical evidence reveal that such efficient BAR derives from the tunneling-mediated interparticle excitonic coupling induced by wave function overlap between neighboring HgTe QDs in films. Thus, our study unveils the potential for realizing efficient hot-carrier/exciton solar cells based on HgTe QDs. Fundamentally, we reveal that the delocalized nature of quantum-confined wave function intensifies BAR. The interparticle excitonic coupling may cast light on the development of next-generation photoelectronic materials, which can retain the size-tunable confinement of colloidal semiconductor QDs while simultaneously maintaining high mobilities and conductivities typical for bulk semiconductor materials.

Dual Surface Modifications of NiOx/Perovskite Interface for Enhancement of Device Stability.

Various phosphonic acid based self-assembled monolayers (SAMs) have been commonly used for interface modifications in inverted perovskite solar cells. This typically results in significant enhancement of the hole extraction and consequent increase in the power conversion efficiency. However, the surface coverage and packing density of SAM molecules can vary, depending on the chosen SAM material and underlying oxide layer. In addition, different SAM molecules have diverse effects on the interfacial energy level alignment and perovskite film growth, resulting in complex relationships between surface modification, efficiency, and lifetime. Here we show that ethanolamine surface modification combined with [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) results in significant improvement in device stability compared to devices with 2PACz modification only. The significantly smaller size of ethanolamine enables it to fill any gaps in 2PACz coverage and provide improved interfacial defect passivation, while its different chemical structure enables it to provide complementary effects to 2PACz passivation. Consequently, the perovskite films are more stable under illumination (slower photoinduced segregation), and the devices exhibit significant stability enhancement. Despite similar power conversion efficiencies (PCE) between 2PACz only and combined ethanolamine-2PACz modification (PCE of champion devices ∼21.6-22.0% for rigid and ∼20.2-21.0% for flexible devices), the T80 lifetime under simulated solar illumination in ambient is improved more than 15 times for both rigid and flexible devices.

Self-Generated Buried Submicrocavities for High-Performance Near-Infrared Perovskite Light-Emitting Diode.

Embedding submicrocavities is an effective approach to improve the light out-coupling efficiency (LOCE) for planar perovskite light-emitting diodes (PeLEDs). In this work, we employ phenethylammonium iodide (PEAI) to trigger the Ostwald ripening for the downward recrystallization of perovskite, resulting in spontaneous formation of buried submicrocavities as light output coupler. The simulation suggests the buried submicrocavities can improve the LOCE from 26.8 to 36.2% for near-infrared light. Therefore, PeLED yields peak external quantum efficiency (EQE) increasing from 17.3% at current density of 114 mA cm-2 to 25.5% at current density of 109 mA cm-2 and a radiance increasing from 109 to 487 W sr-1 m-2 with low rolling-off. The turn-on voltage decreased from 1.25 to 1.15 V at 0.1 W sr-1 m-2. Besides, downward recrystallization process slightly reduces the trap density from 8.90 × 1015 to 7.27 × 1015 cm-3. This work provides a self-assembly method to integrate buried output coupler for boosting the performance of PeLEDs.

1-Chloronaphthalene-Induced Donor/Acceptor Vertical Distribution and Carrier Dynamics Changes in Nonfullerene Organic Solar Cells and the Governed Mechanism.

Electron donors and acceptors in organic solar cells (OSCs) shall strike a favorable vertical phase separation that acceptors and donors have sufficient contact and gradient accumulation near the cathodes and anodes, respectively. Random mixing of donors/acceptors at surface will result in charge accumulation and severe recombination for low carrier-mobility organic materials. However, it is challenging to tune the vertical distribution in bulk-heterojunction films as they are usually made from a well-mixed donor/acceptor solution. Here, for the first time, it presents with solid evidence that the commonly used 1-chloronaphthalene (CN) additive can tune the donor/acceptor vertical distribution and establish the mechanism. Different from the previous understanding that ascribed the efficiency enhancement brought by CN to the improved molecular stacking/crystallization, it is revealed that the induced vertical distribution is the dominant factor leading to the significantly increased performance. Importantly, the vertical distribution tunability is effective in various hot nonfullerene OSC systems and creates more channels for the collection of dissociated carriers at corresponding organic/electrode interfaces, which contributes the high efficiency of 18.29%. This study of the material vertical distribution and its correlation with molecular stacking offers methods for additives selection and provides insights for the understanding and construction of high-performance OSCs.

Diammonium-Mediated Perovskite Film Formation for High-Luminescence Red Perovskite Light-Emitting Diodes.

3D mixed-halide perovskite-based red emitters combine excellent charge-transport characteristics with simple solution processing and good film formation; however, light-emitting diodes (LEDs) based on these emitters cannot yet outperform their nanocrystal counterparts. Here the use of diammonium halides in regulating the formation of mixed bromide-iodide perovskite films is explored. It is found that the diammonium cations preferentially bond to Pb-Br, rather than Pb-I, octahedra, promoting the formation of quasi-2D phases. It is proposed that the perovskite formation is initially dominated by the crystallization of the thermodynamically more favorable 3D phase, but, as the solution gets depleted from the regular A cations, thin shells of amorphous quasi-2D perovskites form. This leads to crystalline perovskite grains with efficiently passivated surfaces and reduced lattice strain. As a result, the diammonium-treated perovskite LEDs demonstrate a record luminance (10745 cd m-2 ) and half-lifetime among 3D perovskite-based red LEDs.

A nonconjugated radical polymer with stable red luminescence in the solid state.

Organic radicals are unstable and stable radicals usually display non-luminescent properties. Luminescent radicals possess the all-in-one properties of optoelectronics, electronics, and magnetics. To date, the reported structures of luminescent radicals are limited to triphenylmethyl radical derivatives and their analogues, which are stabilized with extended π-conjugation. Here, we demonstrate the first example of a nonconjugated luminescent radical. In spite of the lack of delocalized π-stabilization, the radical polymer readily emits red luminescence in the solid state. A traditional luminescent quencher, 2,2,6,6-tetramethylpiperidin-1-yl turned into a red chromophore when grafted onto a polymer backbone. Experimental data confirm that the emission is associated with the nitroxide radicals and is also affected by the packing of the polymer. This work discloses a novel class of luminescent radicals and a distinctive pathway for luminescence from open-shell materials.

Factors That Prevent Spin-Triplet Recombination in Non-fullerene Organic Photovoltaics.

Managing the dynamics of spin-triplet electronic states is crucial for achieving high-performance organic photovoltaics. Here we show that the replacement of fullerene with non-fullerene acceptor (NFA) molecules leads to suppression of triplet recombination and thus more efficient charge generation. This indicates that the relaxation of charges to the local triplet exciton state, although energetically allowed, is outcompeted by the thermally activated separation of interfacial charge-transfer excitons (CTEs) in the NFA-based system. By rationalizing our results with Marcus theory, we propose that triplet recombination in the fullerene system is driven by the small energy difference and strong electronic couplings between the CTE state and the lowest-lying triplet exciton state (T1) of fullerene acceptor molecules. In contrast, the large energy difference and small electronic couplings between these states in the NFA-based blends lead to sufficiently slow triplet relaxation rate compared to the charge separation rate (≪1010 s-1), thus preventing triplet recombination.

Stable bright perovskite nanoparticle thin porous films for color enhancement in modern liquid crystal displays.

Cesium-lead halide perovskite nanoparticles are a promising class of luminescent materials for color and efficient displays. However, material stability is the key issue to solve before we can use these materials in modern displays. Encapsulation is one of the most efficient methods that can markedly improve the stability of perovskite nanoparticles against moisture, heat, oxygen, and light. Thus, we urgently need a low-cost, reliable, and device-compatible encapsulation method for the integration of nanomaterials into display devices. Here, we propose a facile encapsulation method to stabilize perovskite nanoparticles in thin polymer porous films. Using porous polymer films, we achieved good photoluminescence stability in the harsh environment of high temperature, high humidity and strong UV illumination. The good UV stability benefitted from the unique optical properties of the porous film. Besides, we observed photoluminescence enhancement of CsPbBr3 nanoparticle films in a high humidity environment. The stable CsPbBr3 nanoparticle thin porous film provides high brightness (236 nits) and great color enhancement for LCDs and is characterized by simple fabrication with easy scalability, thus it is very suitable for modern LCDs.

High-Performance Blue Perovskite Light-Emitting Diodes Enabled by Efficient Energy Transfer between Coupled Quasi-2D Perovskite Layers.

While there has been extensive investigation into modulating quasi-2D perovskite compositions in light-emitting diodes (LEDs) for promoting their electroluminescence, very few reports have studied approaches involving enhancement of the energy transfer between quasi-2D perovskite layers of the film, which plays very important role for achieving high-performance perovskite LEDs (PeLEDs). In this work, a bifunctional ligand of 4-(2-aminoethyl)benzoic acid (ABA) cation is strategically introduced into the perovskite to diminish the weak van der Waals gap between individual perovskite layers for promoting coupled quasi-2D perovskite layers. In particular, the strengthened interaction between coupled quasi-2D perovskite layers favors an efficient energy transfer in the perovskite films. The introduced ABA can also simultaneously passivate the perovskite defects by reducing metallic Pb for less nonradiative recombination loss. Benefiting from the advanced properties of ABA incorporated perovskites, highly efficient blue PeLEDs with external quantum efficiency of 10.11% and a very long operational stability of 81.3 min, among the best performing blue quasi-2D PeLEDs, are achieved. Consequently, this work contributes an effective approach for high-performance and stable blue PeLEDs toward practical applications.

Long-lived and disorder-free charge transfer states enable endothermic charge separation in efficient non-fullerene organic solar cells.

Organic solar cells based on non-fullerene acceptors can show high charge generation yields despite near-zero donor-acceptor energy offsets to drive charge separation and overcome the mutual Coulomb attraction between electron and hole. Here, we use time-resolved optical spectroscopy to show that free charges in these systems are generated by thermally activated dissociation of interfacial charge-transfer states that occurs over hundreds of picoseconds at room temperature, three orders of magnitude slower than comparable fullerene-based systems. Upon free electron-hole encounters at later times, both charge-transfer states and emissive excitons are regenerated, thus setting up an equilibrium between excitons, charge-transfer states and free charges. Our results suggest that the formation of long-lived and disorder-free charge-transfer states in these systems enables them to operate closely to quasi-thermodynamic conditions with no requirement for energy offsets to drive interfacial charge separation and achieve suppressed non-radiative recombination.

Two Are Better Than One: A Design Principle for Ultralong-Persistent Luminescence of Pure Organics.

Because of their innate ability to store and then release energy, long-persistent luminescence (LPL) materials have garnered strong research interest in a wide range of multidisciplinary fields, such as biomedical sciences, theranostics, and photonic devices. Although many inorganic LPL systems with afterglow durations of up to hours and days have been reported, organic systems have had difficulties reaching similar timescales. In this work, a design principle based on the successes of inorganic systems to produce an organic LPL (OLPL) system through the use of a strong organic electron trap is proposed. The resulting system generates detectable afterglow for up to 7 h, significantly longer than any other reported OLPL system. The design strategy demonstrates an easy methodology to develop organic long-persistent phosphors, opening the door to new OLPL materials.

Delocalization of exciton and electron wavefunction in non-fullerene acceptor molecules enables efficient organic solar cells.

A major challenge for organic solar cell (OSC) research is how to minimize the tradeoff between voltage loss and charge generation. In early 2019, we reported a non-fullerene acceptor (named Y6) that can simultaneously achieve high external quantum efficiency and low voltage loss for OSC. Here, we use a combination of experimental and theoretical modeling to reveal the structure-property-performance relationships of this state-of-the-art OSC system. We find that the distinctive π-π molecular packing of Y6 not only exists in molecular single crystals but also in thin films. Importantly, such molecular packing leads to (i) the formation of delocalized and emissive excitons that enable small non-radiative voltage loss, and (ii) delocalization of electron wavefunctions at donor/acceptor interfaces that significantly reduces the Coulomb attraction between interfacial electron-hole pairs. These properties are critical in enabling highly efficient charge generation in OSC systems with negligible donor-acceptor energy offset.

Bulk Heterojunction Quasi-Two-Dimensional Perovskite Solar Cell with 1.18 V High Photovoltage.

Multicomponent quasi-two-dimensional perovskites (Q-2DPs) have efficient luminescence and improved stability, which are highly desirable for light-emitting diode and perovskite solar cell (PSC). However, the lack of radiative recombination at room temperature is still not well understood and the performance of PSC is not good enough as well. The open-circuit voltage ( VOC) is even lower than that of three-dimensional (3D) PSC with a narrower band gap. In this work, we study the energy transfer of excitons between their multiple components by time-resolved photoluminescence and find that charge transfer from high-energy states to low-energy state is gradually suppressed during elevating temperature owing to trap-mediated recombination. This may reveal the bottleneck of luminescence at room temperature in Q-2DPs, leading to large photovoltage loss in 2D PSC. Therefore, we develop a p-i-n bulk heterojunction (BHJ) structure to reduce the nonradiative recombination and obtain high VOC of 1.18 V for (PMA)2MA4Pb5I15Cl (33.3% PMA) BHJ device, much higher than that of the planar counterparts. The enhanced efficiency is attributed to the improved exciton dissociation via BHJ interface. Our results provide an important step toward high VOC and stable 2D PSCs, which could be used for tandem solar cell and colorful photovoltaic windows.

Perovskite Bifunctional Device with Improved Electroluminescent and Photovoltaic Performance through Interfacial Energy-Band Engineering.

Currently, photovoltaic/electroluminescent (PV/EL) perovskite bifunctional devices (PBDs) exhibit poor performance due to defects and interfacial misalignment of the energy band. Interfacial energy-band engineering between the perovskite and hole-transport layer (HTL) is introduced to reduce energy loss, through adding corrosion-free 3,3'-(2,7-dibromo-9H-fluorene-9,9-diyl) bis(n,n-dimethylpropan-1-amine) (FN-Br) into a HTL free of lithium salt. This strategy can turn the n-type surface of perovskite into p-type and thus correct the misalignment to form a well-defined N-I-P heterojunction. The tailored PBD achieves a high PV efficiency of up to 21.54% (certified 20.24%) and 4.3% EL external quantum efficiency. Free of destructive additives, the unencapsulated devices maintain >92% of their initial PV performance for 500 h at maximum power point under standard air mass 1.5G illumination. This strategy can serve as a general guideline to enhance PV and EL performance of perovskite devices while ensuring excellent stability.

Linearly polarized photoluminescence of InGaN quantum disks embedded in GaN nanorods.

We have investigated the emission from InGaN/GaN quantum disks grown on the tip of GaN nanorods. The emission at 3.21 eV from the InGaN quantum disk doesn't show a Stark shift, and it is linearly polarized when excited perpendicular to the growth direction. The degree of linear polarization is about 39.3% due to the anisotropy of the nanostructures. In order to characterize a single nanostructure, the quantum disks were dispersed on a SiO2 substrate patterned with a metal reference grid. By rotating the excitation polarization angle from parallel to perpendicular relative to the nanorods, the variation of overall PL for the 3.21 eV peak was recorded and it clearly showed the degree of linear polarization (DLP) of 51.5%.

Temperature induced crossing in the optical bandgap of mono and bilayer MoS2 on SiO2.

Photoluminescence measurements in mono- and bilayer-MoS2 on SiO2 were undertaken to determine the thermal effect of the MoS2/SiO2 interface on the optical bandgap. The energy and intensity of the photoluminescence from monolayer MoS2 were lower and weaker than those from bilayer MoS2 at low temperatures, whilst the opposite was true at high temperatures above 200 K. Density functional theory calculations suggest that the observed optical bandgap crossover is caused by a weaker substrate coupling to the bilayer than to the monolayer.