Demonstrating Path-Independent Anyonic Braiding on a Modular Superconducting Quantum Processor.

Anyons, exotic quasiparticles in two-dimensional space exhibiting nontrivial exchange statistics, play a crucial role in universal topological quantum computing. One notable proposal to manifest the fractional statistics of anyons is the toric code model; however, scaling up its size through quantum simulation poses a serious challenge because of its highly entangled ground state. In this Letter, we demonstrate that a modular superconducting quantum processor enables hardware-pragmatic implementation of the toric code model. Through in-parallel control across separate modules, we generate a 10-qubit toric code ground state in four steps and realize six distinct braiding paths to benchmark the performance of anyonic statistics. The path independence of the anyonic braiding statistics is verified by correlation measurements in an efficient and scalable fashion. Our modular approach, serving as a hardware embodiment of the toric code model, offers a promising avenue toward scalable simulation of topological phases, paving the way for quantum simulation in a distributed fashion.

Defect-engineered Sulfur Vacancy Modified NiCo2 S4-x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries.

The low conductivity of sulfur and the shuttle effect of lithium polysulfides (LiPSs) are the two intrinsic obstacles that limit the application of lithium-sulfur batteries (LSBs). Herein, a sulfur vacancy introduced NiCo2 S4 nanosheet array grown on carbon nanofiber (CNF) membrane (NiCo2 S4-x /CNF) is proposed to serve as a self-supporting and binder-free interlayer in LSBs. The conductive CNF skeleton with a non-woven structure can effectively reduce the resistance of the cathode and accommodate volume expansion during charge-discharge process. The bonding between CNF matrix and NiCo2 S4 nanosheet is enhanced by in situ growth, ensuring fast electron transfer. Besides, the sulfur vacancies in NiCo2 S4 enhance the chemisorption of LiPSs, and the highly active sites at vacancies can accelerate the LiPSs conversion kinetics. LSB paired with NiCo2 S4-x /CNF interlayer achieved improved stability in 500 cycles at 0.2 C and long life of 3000 cycles at 3 C. More importantly, a high areal capacity of 9.69 mAh cm-2 is achieved with a sulfur loading of 10.8 mg cm-2 and a low electrolyte to sulfur (E/S) ratio of 4.8. This work provides insight into the sulfur vacancy in catalysis design for LiPSs conversion and demonstrates a promising direction for electronic defect engineering in material design for LSBs.

Defect-Rich Single Atom Catalyst Enhanced Polysulfide Conversion Kinetics to Upgrade Performance of Li-S Batteries.

Lithium-sulfur (Li-S) batteries have attracted considerable attention owing to their extremely high energy densities. However, the application of Li-S batteries has been limited by low sulfur utilization, poor cycle stability, and low rate capability. Accelerating the rapid transformation of polysulfides is an effective approach for addressing these obstacles. In this study, a defect-rich single-atom catalytic material (Fe-N4/DCS) is designed. The abundantly defective environment is favorable for the uniform dispersion and stable existence of single-atom Fe, which not only improves the utilization of single-atom Fe but also efficiently adsorbs polysulfides and catalyzes the rapid transformation of polysulfides. To fully exploit the catalytic activity, catalytic materials are used to modify the routine separator (Fe-N4 /DCS/PP). Density functional theory and in situ Raman spectroscopy are used to demonstrate that Fe-N4 /DCS can effectively inhibit the shuttling of polysulfides and accelerate the redox reaction. Consequently, the Li-S battery with the modified separator achieves an ultralong cycle life (a capacity decay rate of only 0.03% per cycle at a current of 2 C after 800 cycles), and an excellent rate capability (894 mAh g-1 at 3 C). Even at a high sulfur loading of 5.51 mg cm-2 at 0.2 C, the reversible areal capacity still reaches 5.4 mAh cm-2 .

Experimental Realization of Two Qutrits Gate with Tunable Coupling in Superconducting Circuits.

Gate-based quantum computation has been extensively investigated using quantum circuits based on qubits. In many cases, such qubits are actually made out of multilevel systems but with only two states being used for computational purpose. While such a strategy has the advantage of being in line with the common binary logic, it in some sense wastes the ready-for-use resources in the large Hilbert space of these intrinsic multidimensional systems. Quantum computation beyond qubits (e.g., using qutrits or qudits) has thus been discussed and argued to be more efficient than its qubit counterpart in certain scenarios. However, one of the essential elements for qutrit-based quantum computation, two-qutrit quantum gate, remains a major challenge. In this Letter, we propose and demonstrate a highly efficient and scalable two-qutrit quantum gate in superconducting quantum circuits. Using a tunable coupler to control the cross-Kerr coupling between two qutrits, our scheme realizes a two-qutrit conditional phase gate with fidelity 89.3% by combining simple pulses applied to the coupler with single-qutrit operations. We further use such a two-qutrit gate to prepare an EPR state of two qutrits with a fidelity of 95.5%. Our scheme takes advantage of a tunable qutrit-qutrit coupling with a large on:off ratio. It therefore offers both high efficiency and low crosstalk between qutrits, thus being friendly for scaling up. Our Letter constitutes an important step toward scalable qutrit-based quantum computation.

Studies on the origin of the interfacial superconductivity of Sb2Te3/Fe1+yTe heterostructures.

The recent discovery of the interfacial superconductivity (SC) of the Bi2Te3/Fe1+yTe heterostructure has attracted extensive studies due to its potential as a novel platform for trapping and controlling Majorana fermions. Here we present studies of another topological insulator (TI)/Fe1+yTe heterostructure, Sb2Te3/Fe1+yTe, which also has an interfacial 2-dimensional SC. The results of transport measurements support that reduction of the excess Fe concentration of the Fe1+yTe layer not only increases the fluctuation of its antiferromagnetic (AFM) order but also enhances the quality of the SC of this heterostructure system. On the other hand, the interfacial SC of this heterostructure was found to have a wider-ranging TI-layer thickness dependence than that of the Bi2Te3/Fe1+yTe heterostructure, which is believed to be attributed to the much higher bulk conductivity of Sb2Te3 that enhances indirect coupling between its top and bottom topological surface states (TSSs). Our results provide evidence of the interplay among the AFM order, itinerant carries from the TSSs, and the induced interfacial SC of the TI/Fe1+yTe heterostructure system.

A Highly Efficient Sulfur Host Enabled by Nitrogen/Oxygen Dual-Doped Honeycomb-Like Carbon for Advanced Lithium-Sulfur Batteries.

High energy density and long cycle life of lithium-sulfur (Li-S) batteries suffer from the shuttle/expansion effect. Sufficient sulfur storage space, local fixation of polysulfides, and outstanding electrical conductivity are crucial for a robust cathode host. Herein, a modified template method is proposed to synthesize a highly regular and uniform nitrogen/oxygen dual-doped honeycomb-like carbon as sulfur host (N/O-HC-S). The unique structure not only offers physical entrapment for polysulfides (LiPSs) but also provides chemical adsorption and catalytic conversion sites of polysulfides. In addition, this structure offers enough space for loading sulfur, and a regular space of nanometer size can effectively prevent sulfur particles from accumulating. As expected, the as-prepared N/O-HC900-S with high areal sulfur loading (7.4 mg cm-2 ) shows a high areal specific capacity of 7.35 mAh cm-2 at 0.2 C. Theoretical calculations also reveal that the strong chemical immobilization and catalytic conversion of LiPSs attributed to the spin density and charge distribution of carbon atoms will be influenced by the neighbor nitrogen/oxygen dopants. This structure that provides cooperative chemical adsorption, high lithium ions flux, and catalytic conversion for LiPSs can offer a new strategy for constructing a polysulfide confinement structure to achieve robust Li-S batteries.

Transesophageal echocardiography-guided implantation of totally implantable venous access devices via the internal jugular vein: retrospective analysis of 297 cases in pediatric patients.

BACKGROUND: Accurately positioning totally implantable venous access device (TIVAD) catheters and reducing complications in pediatric patients are important and challenging. A number of studies have shown methods for locating the tip of the TIVAD catheter. We assessed the success and complications of TIVAD implantation guided by transesophageal echocardiography (TEE) via the internal jugular vein (IJV) for 294 patients in this retrospective study. METHODS: From May 2019 to March 2021, 297 cases of TIVADs in our hospital were analyzed in this observational, non-randomized, single-center study. The position of the catheter tip under TEE and chest radiography and rates of periprocedural, early, and late complications were evaluated. RESULTS: The implantation was successful in 242 (82.3%) cases which was in a proper position, and the results were consistent with those of postoperative chest radiography. A total of 72 complications were recorded. Of these, 1 case had a perioperative complication, 66 had early complications, and 5 had late complications after port implantation. The most common complications were local infection and catheter malposition, namely 10 (13.9%) cases of incision infection and 58 (80.6%) cases of catheter malposition. In total, 6 (8.3%) cases of port explantation were required. CONCLUSION: Confirmation of proper TIVAD catheter positioning by TEE through an internal jugular approach in children was accurate and safe.

Explicit Gain Equations for Hybrid Graphene-Quantum-Dot Photodetectors.

Graphene is an attractive material for broadband photodetection but suffers from weak light absorption. Coating graphene with quantum dots can significantly enhance light absorption and create extraordinarily high photogain. This high gain is often explained by the classical gain theory which is unfortunately an implicit function and may even be questionable. In this work, explicit gain equations for hybrid graphene-quantum-dot photodetectors are derived. Because of the work function mismatch, lead sulfide quantum dots coated on graphene will form a surface depletion region near the interface of quantum dots and graphene. Light illumination narrows down the surface depletion region, creating a photovoltage that gates the graphene. As a result, high photogain in graphene is observed. The explicit gain equations are derived from the theoretical gate transfer characteristics of graphene and the correlation of the photovoltage with the light illumination intensity. The derived explicit gain equations fit well with the experimental data, from which physical parameters are extracted.

Three-phase composites of NiFe2O4/Ni@C nanoparticles derived from metal-organic frameworks as electrocatalysts for the oxygen evolution reaction.

Composite electrocatalysts of carbon and metals or metal compounds with homogeneous active sites can be obtained through the carbonization of metal organic framework (MOF) materials under inert atmosphere. In this work, a three-phase composite electrocatalysts NiFe2O4/Ni@C were prepared via pyrolysis from self-assembled MOF nanosheets aggregates. The excellent electrocatalytic activity of the obtained electrocatalysts with various Ni:Fe ratios is demonstrated. Especially, the NiFe2O4/Ni@C sample with the mole ratio of Ni:Fe = 1:1 can use the overpotential (η) of 330 and 423 mV to drive 10 and 50 mA cm-2 respectively. After 80 000 s/22 h, the current density could retained 90% of the initial current density. The excellent activity and stability of the electrocatalysts are attributed to nickel and iron ions with uniform dispersion at atomic level in the NiFe2O4 phase and the synergistic effect of nickel and NiFe2O4 nanoparticles with amorphous carbon atoms or nanoparticles around.

Probing the Ferromagnetism and Spin Wave Gap in VI3 by Helicity-Resolved Raman Spectroscopy.

Circularly polarized light carries light spin angular momentum, which may lead helicity-resolved Raman scattering to be sensitive to the electronic spin configuration in magnetic materials. Here, we demonstrate that all Raman modes in the 2D ferromagnet VI3 show different scattering intensities to left and right circularly polarized light at low temperatures, which gives direct evidence of the time-reversal symmetry breaking. By measuring the circular polarization of the dominant Raman mode with respect to the temperature and magnetic field, the ferromagnetic (FM) phase transition and hysteresis behavior can be clearly resolved. Besides the lattice excitations, quasielastic scattering is detected in the paramagnetic phase, and it gradually evolves into the acoustic magnon mode at 18.5 cm-1 in the FM state, which gives the spin wave gap that results from large magnetic anisotropy. Our findings demonstrate that helicity-resolved Raman spectroscopy is an effective tool to directly probe the ferromagnetism in 2D magnets.

Magnetic Order-Induced Polarization Anomaly of Raman Scattering in 2D Magnet CrI3.

The recent discovery of 2D magnets has revealed various intriguing phenomena due to the coupling between spin and other degrees of freedoms (such as helical photoluminescence, nonreciprocal SHG). Previous research on the spin-phonon coupling effect mainly focuses on the renormalization of phonon frequency. Here we demonstrate that the Raman polarization selection rules of optical phonons can be greatly modified by the magnetic ordering in 2D magnet CrI3. For monolayer samples, the dominant A1g peak shows an abnormally high intensity in the cross-polarization channel at low temperatures, which is forbidden by the selection rule based on the lattice symmetry. For the bilayer, this peak is absent in the cross-polarization channel for the layered antiferromagnetic (AFM) state and reappears when it is tuned to the ferromagnetic (FM) state by an external magnetic field. Our findings shed light on exploring the emergent magneto-optical effects in 2D magnets.

A Long Cycle-Life High-Voltage Spinel Lithium-Ion Battery Electrode Achieved by Site-Selective Doping.

Spinel LiNi0.5 Mn1.5 O4 (LNMO) is a promising cathode candidate for the next-generation high energy-density lithium-ion batteries (LIBs). Unfortunately, the application of LNMO is hindered by its poor cycle stability. Now, site-selectively doped LNMO electrode is prepared with exceptional durability. In this work, Mg is selectively doped onto both tetrahedral (8a) and octahedral (16c) sites in the Fd 3 ‾ m structure. This site-selective doping not only suppresses unfavorable two-phase reactions and stabilizes the LNMO structure against structural deformation, but also mitigates the dissolution of Mn during cycling. Mg-doped LNMOs exhibit extraordinarily stable electrochemical performance in both half-cells and prototype full-batteries with novel TiNb2 O7 counter-electrodes. This work pioneers an atomic-doping engineering strategy for electrode materials that could be extended to other energy materials to create high-performance devices.

WISP1 silencing confers protection against epithelial-mesenchymal transition of renal tubular epithelial cells in rats via inactivation of the wnt/ß-catenin signaling pathway in uremia.

Uremia can affect hepatic metabolism of drugs by regulating the clearance of drugs, but it has not been clarified whether gene silencing could modulate the epithelial-mesenchymal transition (EMT) process in uremia. Hence, we investigated the effect of WISP1 gene silencing on the renal tubular EMT in uremia through the wnt/ß-catenin signaling pathway. Initially, microarray-based gene expression profiling of uremia was used to identify differentially expressed genes. Following the establishment of uremia rat model, serum creatinine, and urea nitrogen of rats were detected. Renal tubular epithelial cells (TECs) were transfected with shRNA-WISP1 lentivirus interference vectors and LiCI (the wnt/ß-catenin signaling pathway activator) to explore the regulatory mechanism of WISP1 in uremia in relation to the wnt/ß-catenin signaling pathway. Then, expression of WISP1, wnt2b, E-cadherin, α-SMA, c-myc, Cyclin D1, MMP-2, and MMP-9 was determined. Furthermore, TEC migration and invasion were evaluated. Results suggested that WISP1 and the wnt/ß-catenin signaling pathway were associated with uremia. Uremic rats exhibited increased serum creatinine and urea nitrogen levels, upregulated WISPl, and activated wnt/ß-catenin signaling pathway. Subsequently, WISP1 silencing decreased wnt2b, c-myc, Cyclin D1, α-SMA, MMP-2, and MMP-9 expression but increased E-cadherin expression, whereas LiCI treatment exhibited the opposite trends. In addition, WISP1 silencing suppressed TEC migration and invasion, whereas LiCI treatment promoted TEC migration and invasion. The findings indicate that WISP1 gene silencing suppresses the activation of the wnt/ß-catenin signaling pathway, thus reducing EMT of renal TECs in uremic rats.

Experimental Realization of Nonadiabatic Shortcut to Non-Abelian Geometric Gates.

When a quantum system is driven slowly through a parametric cycle in a degenerate Hilbert space, the state would acquire a non-Abelian geometric phase, which is stable and forms the foundation for holonomic quantum computation (HQC). However, in the adiabatic limit, the environmental decoherence becomes a significant source of errors. Recently, various nonadiabatic holonomic quantum computation (NHQC) schemes have been proposed, but all at the price of increased sensitivity to control errors. Alternatively, there exist theoretical proposals for speeding up HQC by the technique of "shortcut to adiabaticity" (STA), but no experimental demonstration has been reported so far, as these proposals involve a complicated control of four energy levels simultaneously. Here, we propose and experimentally demonstrate that HQC via shortcut to adiabaticity can be constructed with only three energy levels, using a superconducting qubit in a scalable architecture. With this scheme, all holonomic single-qubit operations can be realized nonadiabatically through a single cycle of state evolution. As a result, we are able to experimentally benchmark the stability of STA+HQC against NHQC in the same platform. The flexibility and simplicity of our scheme makes it also implementable on other systems, such as nitrogen-vacancy center, quantum dots, and nuclear magnetic resonance. Finally, our scheme can be extended to construct two-qubit holonomic entangling gates, leading to a universal set of STAHQC gates.

Discerning the Sources of Silver Nanoparticle in a Terrestrial Food Chain by Stable Isotope Tracer Technique.

The increasing use of silver-containing nanoparticles (NPs) in commercial products has led to NP accumulation in the environment and potentially in food webs. Identifying the uptake pathways of different chemical species of NPs, such as Ag2S-NP and metallic AgNPs, into plants is important to understanding their entry into food chains. In this study, soybean Glycine max L. was hydroponically exposed to Ag2S-NPs via their roots (10-50 mg L-1) and stable-isotope-enriched 109AgNPs via their leaves [7.9 µg (g fresh weight)-1]. Less than 29% of Ag in treated leaves (in direct contact with 109AgNP) was accumulated from root uptake of Ag2S-NPs, whereas almost all of the Ag in soybean roots and untreated leaves sourced from Ag2S-NPs. Therefore, Ag2S-NPs are phytoavailable and translocate upward. During trophic transfer the Ag isotope signature was preserved, indicating that accumulated Ag in snails most likely originated from Ag2S-NPs. On average, 78% of the Ag in the untreated leaves was assimilated by snails, reinforcing the considerable trophic availability of Ag2S-NPs via root uptake. By highlighting the importance of root uptake of Ag2S-NPs in plant uptake and trophic transfer to herbivores, our study advances current understanding of the biogeochemical fate of Ag-containing NPs in the terrestrial environment.

Enhanced Structural Stability of Nickel-Cobalt Hydroxide via Intrinsic Pillar Effect of Metaborate for High-Power and Long-Life Supercapacitor Electrodes.

Layered α-Ni(OH)2 and its derivative bimetallic hydroxides (e.g., α-(Ni/Co)(OH)2) have attracted much attention due to their high specific capacitance, although their insufficient cycling stability has blocked their wide application in various technologies. In this work, we demonstrate that the cycling performance of α-(Ni/Co)(OH)2 can be obviously enhanced via the intrinsic pillar effect of metaborate. Combining the high porosity feature of the metaborate stabilized α-(Ni/Co)(OH)2 and the improved electronic conductivity offered by graphene substrate, the average capacitance fading rate of the metaborate stabilized α-(Ni/Co)(OH)2 is only ∼0.0017% per cycle within 10 000 cycles at the current density of 5 A g-1. The rate performance is excellent over a wide temperature range from -20 to 40 °C. We believe that the enhancements should mainly be ascribed to the excellent structural stability offered by the metaborate pillars, and the detailed mechanism is discussed.

Preparation and Growth of N-Doped Hollow Carbon Nanospheres and Their Application as Catalyst Support in Direct Borohydride Fuel Cell.

N-doped hollow carbon nanospheres (HCNSs) were prepared by electric arc discharge method in N2 atmosphere. X-ray Photoelectron Spectroscopy (XPS) analysis shows that their nitrogen content reaches up to 4.9 atom%. Both the low thermal conductivity of N2 and the doping of nitrogen atom make carbon unit bend to form hollow nanosphere structure. High-resolution transmission electron microscopy (HRTEM) and X-ray diffusion (XRD) analysis prove the presence of detected defects and a poor crystallinity on the HCNSs shell. Moreover, annealing treatment of HCNSs was carried out at 1100 degrees C/10 h and 1400 degrees C/2 h to research their fracture extension. It is found that HCNSs could grow into closed-tubes even with a shell at high annealing temperature. HCNSs were applied in direct borohydride fuel cell (DBFC) to evaluate their catalytic performance. The electrochemical results show that pure HCNSs doesn't have any catalysis effect, but they can greatly promote the catalytic performance of CoO, and the largest polarization current density of which achieves 1.845 A x cm(-2) at -0.7 V (vs. Hg/HgO electrode).

Ginsenoside Rg3 induces mesangial cells proliferation and attenuates apoptosis by miR-216a-5p/MAPK pathway in diabetic kidney disease.

BACKGROUND: Ginsenoside Rg3 is an active saponin isolated from ginseng, which can reduce renal inflammation. However, the role and mechanism of Rg3 in diabetic kidney disease (DKD) are far from being studied. METHODS: The effects of Rg3 and miR-216a-5p on the proliferation, apoptosis, and MAPK pathway in high glucose (HG)-induced SV40 MES 13 were monitored by CCK-8, TUNEL staining, and western blot. RESULTS: Rg3 treatment could accelerate proliferation and suppress apoptosis in HG-induced SV40 MES. Moreover, miR-216a-5p inhibition also could alleviate renal injury, prevent apoptosis, and activate the MAPK pathway in kidney tissues of diabetic model mice. CONCLUSION: Rg3 could attenuate DKD progression by downregulating miR-216a-5p, suggesting Rg3 and miR-216a-5p might be the potential drug and molecular targets for DKD therapy.

Silencing of METTL3 prevents the proliferation, migration, epithelial-mesenchymal transition, and renal fibrosis of high glucose-induced HK2 cells by mediating WISP1 in m6A-dependent manner.

Diabetic nephropathy (DN) is one of the most serious complications in diabetic patients. And m6A modifications mediated by METTL3 are involved multiple biological processes. However, the specific function and mechanism of METTL3 in DN remains unclear. DN model mice were first established with streptozotocin, and WISP1 expression was confirmed by qRT-PCR. Then the influences of WISP1 or/and METTL3 on the proliferation, migration, and epithelial-mesenchymal transition (EMT) and fibrosis-related proteins of high glucose (HG)-induced HK2 cells or HK2 cells were tested through CCK-8, wound healing, and western blot. We first revealed that WISP1 was highly expressed in renal tissues of DN model mice and HG-induced HK2 cells. Functionally, WISP1 or METTL3 silencing could weaken the proliferation, migration, EMT, and fibrosis of HG-treated HK2 cells, and WISP1 or METTL3 overexpression could induce the proliferation, migration, EMT, and fibrosis of HK2 cells. Additionally, METTL3 silencing could decrease WISP1 m6A modification, and silencing of METTL3 also could notably suppress the biological functions of HG-induced HK2 cells by downregulating WISP1. Silencing of METTL3 prevents DN development process by decreasing WISP1 with m6A modification pattern. Therefore, we suggest that METTL3/WISP1 axis might be a novel therapeutic target for DN.

Elastic MXene conductive layers and electrolyte engineering enable robust potassium storage.

The precisely engineered structures of materials greatly influence the manifestation of their properties. For example, in the process of alkali metal ion storage, a carefully designed structure capable of accommodating inserted and extracted ions will improve the stability of material cycling. The present study explores the uniform distribution of self-grown carbon nanotubes to provide structural support for the conductive and elastic MXene layers of Ti3C2Tx-Co@NCNTs. Furthermore, a compatible electrolyte system has been optimized by analyzing the solvation structure and carefully regulating the component in the solid electrolyte interphase (SEI) layer. Mechanistic studies demonstrate that the decomposition predominantly controlled by FSI- leads to the formation of a robust inorganic SEI layer enriched with KF, thus effectively inhibiting irreversible side reactions and major structural deterioration. Confirming our expectations, Ti3C2Tx-Co@NCNTs exhibits an impressive reversible capacity of 260 mA h g-1, even after 2000 cycles at 500 mA g-1 in 1 M KFSI (DME), surpassing most MXene-based anodes reported for PIBs. Additionally, density functional theory (DFT) calculations verify the superior electronic conductivity and lower K+ diffusion energy barriers of the novel superstructure of Ti3C2Tx-Co@NCNTs, thereby affirming the improved electrochemical kinetics. This study presents systematic evaluation methodologies for future research on MXene-based anodes in PIBs.