Lattice anchoring stabilizes solution-processed semiconductors.

The stability of solution-processed semiconductors remains an important area for improvement on their path to wider deployment. Inorganic caesium lead halide perovskites have a bandgap well suited to tandem solar cells1 but suffer from an undesired phase transition near room temperature2. Colloidal quantum dots (CQDs) are structurally robust materials prized for their size-tunable bandgap3; however, they also require further advances in stability because they are prone to aggregation and surface oxidization at high temperatures as a consequence of incomplete surface passivation4,5. Here we report 'lattice-anchored' hybrid materials that combine caesium lead halide perovskites with lead chalcogenide CQDs, in which lattice matching between the two materials contributes to a stability exceeding that of the constituents. We find that CQDs keep the perovskite in its desired cubic phase, suppressing the transition to the undesired lattice-mismatched phases. The stability of the CQD-anchored perovskite in air is enhanced by an order of magnitude compared with pristine perovskite, and the material remains stable for more than six months at ambient conditions (25 degrees Celsius and about 30 per cent humidity) and more than five hours at 200 degrees Celsius. The perovskite prevents oxidation of the CQD surfaces and reduces the agglomeration of the nanoparticles at 100 degrees Celsius by a factor of five compared with CQD controls. The matrix-protected CQDs show a photoluminescence quantum efficiency of 30 per cent for a CQD solid emitting at infrared wavelengths. The lattice-anchored CQD:perovskite solid exhibits a doubling in charge carrier mobility as a result of a reduced energy barrier for carrier hopping compared with the pure CQD solid. These benefits have potential uses in solution-processed optoelectronic devices.

Discovery of a dual-action small molecule that improves neuropathological features of Alzheimer's disease mice.

Alzheimer's disease (AD) is characterized by complex, multifactorial neuropathology, suggesting that small molecules targeting multiple neuropathological factors are likely required to successfully impact clinical progression. Acid sphingomyelinase (ASM) activation has been recognized as an important contributor to these neuropathological features in AD, leading to the concept of using ASM inhibitors for the treatment of this disorder. Here we report the identification of KARI 201, a direct ASM inhibitor evaluated for AD treatment. KARI 201 exhibits highly selective inhibition effects on ASM, with excellent pharmacokinetic properties, especially with regard to brain distribution. Unexpectedly, we found another role of KARI 201 as a ghrelin receptor agonist, which also has therapeutic potential for AD treatment. This dual role of KARI 201 in neurons efficiently rescued neuropathological features in AD mice, including amyloid beta deposition, autophagy dysfunction, neuroinflammation, synaptic loss, and decreased hippocampal neurogenesis and synaptic plasticity, leading to an improvement in memory function. Our data highlight the possibility of potential clinical application of KARI 201 as an innovative and multifaceted drug for AD treatment.

Ambipolar charge-transfer graphene plasmonic cavities.

Plasmon polaritons in van der Waals materials hold promise for various photonics applications1-4. The deterministic imprinting of spatial patterns of high carrier density in plasmonic cavities and nanoscale circuitry can enable the realization of advanced nonlinear nanophotonic5 and strong light-matter interaction platforms6. Here we demonstrate an oxidation-activated charge transfer strategy to program ambipolar low-loss graphene plasmonic structures. By covering graphene with transition-metal dichalcogenides and subsequently oxidizing the transition-metal dichalcogenides into transition-metal oxides, we activate charge transfer rooted in the dissimilar work functions between transition-metal oxides and graphene. Nano-infrared imaging reveals ambipolar low-loss plasmon polaritons at the transition-metal-oxide/graphene interfaces. Further, by inserting dielectric van der Waals spacers, we can precisely control the electron and hole densities induced by oxidation-activated charge transfer and achieve plasmons with a near-intrinsic quality factor. Using this strategy, we imprint plasmonic cavities with laterally abrupt doping profiles with nanoscale precision and demonstrate plasmonic whispering-gallery resonators based on suspended graphene encapsulated in transition-metal oxides.

A multi-layered network model identifies Akt1 as a common modulator of neurodegeneration.

The accumulation of misfolded and aggregated proteins is a hallmark of neurodegenerative proteinopathies. Although multiple genetic loci have been associated with specific neurodegenerative diseases (NDs), molecular mechanisms that may have a broader relevance for most or all proteinopathies remain poorly resolved. In this study, we developed a multi-layered network expansion (MLnet) model to predict protein modifiers that are common to a group of diseases and, therefore, may have broader pathophysiological relevance for that group. When applied to the four NDs Alzheimer's disease (AD), Huntington's disease, and spinocerebellar ataxia types 1 and 3, we predicted multiple members of the insulin pathway, including PDK1, Akt1, InR, and sgg (GSK-3ß), as common modifiers. We validated these modifiers with the help of four Drosophila ND models. Further evaluation of Akt1 in human cell-based ND models revealed that activation of Akt1 signaling by the small molecule SC79 increased cell viability in all models. Moreover, treatment of AD model mice with SC79 enhanced their long-term memory and ameliorated dysregulated anxiety levels, which are commonly affected in AD patients. These findings validate MLnet as a valuable tool to uncover molecular pathways and proteins involved in the pathophysiology of entire disease groups and identify potential therapeutic targets that have relevance across disease boundaries. MLnet can be used for any group of diseases and is available as a web tool at http://ssbio.cau.ac.kr/software/mlnet.

Three consecutive cytosolic glycolysis enzymes modulate autophagic flux.

Autophagy serves as an important recycling route for the growth and survival of eukaryotic organisms in nutrient-deficient conditions. Since starvation induces massive changes in the metabolic flux that are coordinated by key metabolic enzymes, specific processing steps of autophagy may be linked with metabolic flux-monitoring enzymes. We attempted to identify carbon metabolic genes that modulate autophagy using VIGS screening of 45 glycolysis- and Calvin-Benson cycle-related genes in Arabidopsis (Arabidopsis thaliana). Here, we report that three consecutive triose-phosphate-processing enzymes involved in cytosolic glycolysis, triose-phosphate-isomerase (TPI), glyceraldehyde-3-phosphate dehydrogenase (GAPC), and phosphoglycerate kinase (PGK), designated TGP, negatively regulate autophagy. Depletion of TGP enzymes causes spontaneous autophagy induction and increases AUTOPHAGY-RELATED 1 (ATG1) kinase activity. TGP enzymes interact with ATG101, a regulatory component of the ATG1 kinase complex. Spontaneous autophagy induction and abnormal growth under insufficient sugar in TGP mutants are suppressed by crossing with the atg101 mutant. Considering that triose-phosphates are photosynthates transported to the cytosol from active chloroplasts, the TGP enzymes would be strategically positioned to monitor the flow of photosynthetic sugars and modulate autophagy accordingly. Collectively, these results suggest that TGP enzymes negatively control autophagy acting upstream of the ATG1 complex, which is critical for seedling development.

Identification of maximal tumor size associated with negligible lymph node metastasis for endoscopic submucosal dissection of undifferentiated-type early gastric cancer.

BACKGROUND AND AIMS: When treating undifferentiated-type early gastric cancer (UD-EGC) that is limited to the mucosa (clinically T1a), endoscopic submucosal dissection (ESD) can be considered if the tumor is 2 cm or less and is not ulcerated. However, there is insufficient evidence to determine the relationships between tumor size and oncological safety of ESD in UD-EGC. METHODS: The pathology reports of Korean patients who were diagnosed with UD-EGC (n = 5286) were retrospectively reviewed. The cumulative incidence of lymph node metastasis (LNM) according to tumor size was evaluated in subgroups. The tumor-size cut-off was identified as the upper limit of the 95% confidence interval (CI) of cumulative LNM incidence that did not exceed 1.0%. RESULTS: We identified 1516 patients with non-ulcerated T1a tumors ≤2 cm in size. Among patients without lymphatic invasion, 1.5% (95% CI 0.91-2.16%) had LNM. In patients with poorly differentiated tubular adenocarcinoma (PD), LNM increased from 0 to 0.74% based on a tumor size of 1.0 cm. Regardless of tumor size, smaller percentages of undifferentiated-type (UD) and poorly cohesive carcinoma (PCC) patients experienced LNM than did those with PD. In non-ulcerated mucosal cancer without lymphatic invasion and tumor size ≤0.9 cm, no LNM was observed in patients with UD (95% CI 0-0.53%), PCC (95% CI 0-0.59%), or PD (95% CI 0-0.86%) histologic type. CONCLUSION: In patients diagnosed with non-ulcerated T1a UD-EGC, ESD can be performed if the tumor size is 0.9 cm or less, regardless of histologic type.

Optimizing targeting strategies for lithotripsy through in-vitro and in vivo studies with consideration of respiratory regularity.

BACKGROUND: This work aimed to identify a method to achieve improved stone targeting and safety in shockwave lithotripsy by accounting for respiration. METHODS: We set up an electromotive device simulating renal movement during respiration to place artificial stones within the phantom gel, measuring stone weight changes before and after shockwave exposure and the cavitation damage. We conducted clinical trials using respiratory masks and sensors to monitor and analyze patient respiration during shockwave lithotripsy. RESULTS: The in vitro efficiency of lithotripsy was higher when adjusted for respiration than when respiration was not adjusted for. Slow respiration showed the best efficiency with higher hit rates when not adjusted for respiration. Cavitation damage was also lowest during slow respiration. The clinical study included 52 patients. Respiratory regularity was maintained above 90% in regular respiration. When respiration was regular, the lithotripsy rate was about 65.6%, which stayed at about 40% when respiration was irregular. During the lithotripsy, the participants experienced various events, such as sleep, taking off their masks, talking, movement, coughing, pain, nervousness, and hyperventilation. The generation of shockwaves based on respiratory regularity could reduce pain in patients. CONCLUSION: These results suggest a more accurate lithotripsy should be performed according to respiratory regularity.

Establishment of Safety Monitoring System for Vaccines Not Included in the National Immunization Program in Korea.

BACKGROUND: In Korea, there are no surveillance programs for vaccines that are not included in the national immunization program (NIP), and vaccine safety monitoring in the adult population is inadequate. This study aimed to establish a safety monitoring system for non-NIP vaccines in adults. METHODS: Frequently administered non-NIP vaccines were selected. Individuals were included if they received at least one of the selected vaccines at a participating institution and provided informed consent. Solicited and unsolicited adverse events were monitored using questionnaires sent through text messages on days 1, 3, 7, 28, and 90 post-vaccination. Selected adverse events of special interest (AESIs) were monitored monthly by retrospective review of electronic medical records. Causality was assessed according to the Korea Disease Control and Prevention Agency guidelines. RESULTS: Four vaccines (tetanus-diphtheria-pertussis [Tdap], pneumococcal conjugate 13-valent [PCV13], live zoster vaccine [ZVL], and recombinant zoster vaccine [RZV]) were selected, and their safety profiles were monitored at four tertiary hospitals and 10 primary care clinics. The response rates of the questionnaires on post-vaccination days 1, 7, 28, and 90 were 99.2%, 93.6%, 81.0%, and 48.7%, respectively. Of 555 AESI identified over 10 months, 10 cases received one of the selected non-NIP vaccines within 90 days of the event. CONCLUSION: We are establishing the first safety monitoring system for selected non-NIP vaccines in Korea since September 2022 and report its progress as of July 2023. However, continuous government support is essential for its maintenance and improvement.

Self-Aligned Top-Gate Structure in High-Performance 2D p-FETs via van der Waals Integration and Contact Spacer Doping.

The potential of 2D materials in future CMOS technology is hindered by the lack of high-performance p-type field effect transistors (p-FETs). While utilization of the top-gate (TG) structure with a p-doped spacer area offers a solution to this challenge, the design and device processing to form gate stacks pose serious challenges in realization of ideal p-FETs and PMOS inverters. This study presents a novel approach to address these challenges by fabricating lateral p+-p-p+ junction WSe2 FETs with self-aligned TG stacks in which desired junction is formed by van der Waals (vdW) integration and selective oxygen plasma-doping into spacer regions. The exceptional electrostatic controllability with a high on/off current ratio and small subthreshold swing (SS) of plasma doped p-FETs is achieved with the self-aligned metal/hBN gate stacks. To demonstrate the effectiveness of our approach, we construct a PMOS inverter using this device architecture, which exhibits a remarkably low power consumption of approximately 4.5 nW.

Thermodynamically Driven Tilt Grain Boundaries of Monolayer Crystals Using Catalytic Liquid Alloys.

We report a method to precisely control the atomic defects at grain boundaries (GBs) of monolayer MoS2 by vapor-liquid-solid (VLS) growth using sodium molybdate liquid alloys, which serve as growth catalysts to guide the formations of the thermodynamically most stable GB structure. The Mo-rich chemical environment of the alloys results in Mo-polar 5|7 defects with a yield exceeding 95%. The photoluminescence (PL) intensity of VLS-grown polycrystalline MoS2 films markedly exceeds that of the films, exhibiting abundant S 5|7 defects, which are kinetically driven by vapor-solid-solid growths. Density functional theory calculations indicate that the enhanced PL intensity is due to the suppression of nonradiative recombination of charged excitons with donor-type defects of adsorbed Na elements on S 5|7 defects. Catalytic liquid alloys can aid in determining a type of atomic defect even in various polycrystalline 2D films, which accordingly provides a technical clue to engineer their properties.

Increased Mobility and Reduced Hysteresis of MoS2 Field-Effect Transistors via Direct Surface Precipitation of CsPbBr3-Nanoclusters for Charge Transfer Doping.

Transition-metal dichalcogenides (TMDs) and metal halide perovskites (MHPs) have been investigated for various applications, owing to their unique physical properties and excellent optoelectronic functionalities. TMD monolayers synthesized via chemical vapor deposition (CVD), which are advantageous for large-area synthesis, exhibit low mobility and prominent hysteresis in the electrical signals of field-effect transistors (FETs) because of their native defects. In this study, we demonstrate an increase in electrical mobility by ∼170 times and reduced hysteresis in the current-bias curves of MoS2 FETs hybridized with CsPbBr3 for charge transfer doping, which is implemented via solution-based CsPbBr3-nanocluster precipitation on CVD-grown MoS2 monolayer FETs. Electrons injected from CsPbBr3 into MoS2 induce heavy n-doping and heal point defects in the MoS2 channel layer, thus significantly increasing mobility and reducing hysteresis in the hybrid FETs. Our results provide a foundation for improving the reliability and performance of TMD-based FETs by hybridizing them with solution-based perovskites.

Cloning, Expression, Purification, and Characterization of Lactate Dehydrogenase from Plasmodium knowlesi: A Zoonotic Malaria Parasite.

Plasmodium knowlesi is the only Plasmodium that causes zoonotic disease among the Plasmodium that cause infection in humans. It is fatal due to its short asexual growth cycle within 24 h. Lactate dehydrogenase (LDH), an enzyme that catalyzes the final step of glycolysis, is a biomarker for diagnosing infection by Plasmodium spp. parasite. Therefore, this study aimed to efficiently produce the soluble form of P. knowlesi LDH (PkLDH) using a bacterial expression system for studying malaria caused by P. knowlesi. Recombinant pET-21a(+)-PkLDH plasmid was constructed by inserting the PkLDH gene into a pET-21a(+) expression vector. Subsequently, the recombinant plasmid was inserted into the protein-expressing Escherichia coli Rosetta(DE3) strain, and the optimal conditions for overexpression of the PkLDH protein were established using this strain. We obtained a yield of 52.0 mg/L PkLDH from the Rosetta(DE3) strain and confirmed an activity of 483.9 U/mg through experiments. This methodology for high-efficiency PkLDH production can be utilized for the development of diagnostic methods and drug candidates for distinguishing malaria caused by P. knowlesi.

Educational needs of community visiting nurses for infection prevention and control: Application of the Borich needs assessment and the Locus for Focus models.

OBJECTIVES: This study aimed to assess the educational needs and analyze the priorities of infection prevention and control (IPC) for community-visiting nurses. DESIGN: This is a cross-sectional descriptive study. SAMPLE: This study was conducted with 144 visiting nurses working in public health centers and long-term care facilities in South Korea. METHOD: A total of 23 questions in five subcategories were used to measure the current knowledge and perceived importance of IPC in community-visiting nursing. Data were collected from June 23 to October 30, 2021, during the COVID-19 pandemic. Data were analyzed paired t-test, the Borich needs assessment, and the Locus for Focus models. RESULTS: Top-priority content was defined as content belonging to two models, the first 10 contents of Borich needs assessment and the contents located in the Quadrant I of the Locus for Focus models. "Reporting in case of infection-related accidents," "Mandatory vaccination for visiting nurses," "Standard precaution," "Airborne precaution," "Contact precautions," "Respiratory infection control," and "Post-visit management." CONCLUSIONS: This study suggests that it is necessary to provide visiting nurses with more opportunities for IPC education and to develop standardized IPC programs that consider educational priorities.

Socioeconomic and Other Risk Factors for Retear after Arthroscopic Surgery for Nontraumatic Rotator Cuff Tear.

Background and Objectives: Few studies have investigated the socioeconomic factors associated with retear after rotator cuff repair. This study aimed to identify the risk factors, including socioeconomic factors, for rotator cuff retear in patients who underwent arthroscopic rotator cuff repair. Materials and Methods: This retrospective study included 723 patients diagnosed with full-thickness rotator cuff tears who underwent arthroscopic rotator cuff repair from March 2010 to March 2021. The outcome variable was rotator cuff retear observed on postoperative magnetic resonance imaging or ultrasonography. Sex, age, obesity, diabetes, symptom duration, and tear size were the independent variables. Socioeconomic variables included occupation, educational level, type of medical insurance, and area of residence. We compared patients with and without retear and estimated the effects of the independent factors on retear risk. Results: The mean age of the patients, symptom duration, and tear size were 62.4 ± 8.0 years, 1.8 ± 1.7 years, and 21.8 ± 12.5 mm, respectively. The age, type of medical insurance, diabetes, tear size, and symptom duration differed significantly between patients with and without retearing (p < 0.05). Age, occupation, type of medical insurance, diabetes, initial tear size, and symptom duration significantly affected the risk of retear. Patients who performed manual labor had a significantly higher retear rate (p = 0.005; OR, 1.95; 95% CI, 1.23-3.11). The highest retear risk was seen in patients with Medicaid insurance (p < 0.001; OR, 4.34; 95% CI, 2.09-9.02). Conclusions: Age, initial tear size, and symptom duration significantly affect retear risk after arthroscopic rotator cuff repair. Occupation and type of medical insurance were also risk factors for retear. Socioeconomically vulnerable patients may be at a greater risk of retear. Proactive efforts are required to expand early access to medical care.

Herpes Zoster Reactivation After mRNA and Adenovirus-Vectored Coronavirus Disease 2019 Vaccination: Analysis of National Health Insurance Database.

BACKGROUND: Our study aimed to determine the risk of herpes zoster reactivation and coronavirus disease 2019 (COVID-19) vaccination (mRNA vaccine [BNT162b2] and adenovirus-vectored vaccine [ChAdOx1 nCoV-19]). METHODS: This retrospective study analyzed herpes zoster cases diagnosed between 26 February 2021 and 30 June 2021 and registered in the National Health Insurance Service database. A matched case-control study with a 1:3 matching ratio and a propensity score matching (PSM) study with a 1:1 ratio of vaccinated and unvaccinated individuals were performed. RESULTS: In the matched case control analysis, BNT162b2 was associated with an increased risk of herpes zoster reactivation (first dose adjusted odds ratio [aOR], 1.11; 95% confidence interval [CI], 1.06-1.15; second dose aOR, 1.17; 95% CI, 1.12-1.23). PSM analysis revealed a statistically significant increase in risk within 18 days following any vaccination (adjusted hazard ratio [aHR], 1.09; 95% CI, 1.02-1.16). BNT162b2 was associated with an increased risk at 18 days postvaccination (aHR, 1.65; 95% CI, 1.35-2.02) and second dose (aHR, 1.10; 95% CI, 1.02-1.19). However, the risk did not increase in both analyses of ChAdOx1 vaccination. CONCLUSIONS: mRNA COVID-19 vaccination possibly increases the risk of herpes zoster reactivation, and thus close follow-up for herpes zoster reactivation is required.

Usefulness of double plate fixation after failed ORIF for clavicle shaft fracture.

PURPOSE: We aimed to evaluate the clinical and radiological outcomes of double plate fixation for failed clavicle shaft fracture surgery. MATERIALS AND METHODS: We analyzed 14 patients who underwent double plate fixation due to plate failure after clavicle shaft fracture surgery from March 2016 to March 2021. The study used 3.5 mm locking compression plates for superior clavicle and anterior reconstruction in all patients. In addition, moldable allograft bone was used to fill the bone defect. Clinical and radiological evaluation was performed immediately, at 2 and 4 weeks, and 3, 6, 9, and 12 months postoperatively. The visual analog scale (VAS), University of California at Los Angeles (UCLA) shoulder scale, and American Shoulder and Elbow Surgeons (ASES) scores and range of motion of the shoulder were evaluated as clinical results. For radiological evaluation, anteroposterior, caudal, and cephalad views of both clavicles were used. Successful bone union was defined as complete adjoining of the fracture site through callus formation. RESULTS: Successful bone union was achieved in all patients, and the mean time to bone union was 16.7 ± 1.2 weeks (range, 12-24 weeks). Statistically significant improvement in forward flexion and external and internal rotation was observed from 135.5° ± 6.3, 45.2° ± 5.3, and 13° ± 2.3 preoperatively to 157.0° ± 9.3, 68.7° ± 6.3, and 9.8° ± 3.1 at the final follow-up, respectively. The VAS score improved from an average of 6.2 ± 2.8 preoperatively to 1.3 ± 0.7 at the final follow-up, which was statistically significant (P = 0.018). In addition, the ASES score significantly increased from a mean of 52.1 ± 6.3 points preoperatively to 83.6 ± 7.8 points at the final follow-up (P = 0.001). The average UCLA shoulder score was 16.7 ± 1.4 and 31.4 ± 2.2 points preoperatively and at the final follow-up, respectively, which was statistically significant (P = 0.001). CONCLUSION: Double plate fixation has shown good results after failed open reduction and internal fixation (ORIF) for clavicle shaft fractures. Therefore, in complicated situations after ORIF, double plate fixation is considered a surgical treatment option.

Implementation of real-time TDDFT for periodic systems in the open-source PySCF software package.

We present a new implementation of real-time time-dependent density functional theory (RT-TDDFT) for calculating excited-state dynamics of periodic systems in the open-source Python-based PySCF software package. Our implementation uses Gaussian basis functions in a velocity gauge formalism and can be applied to periodic surfaces, condensed-phase, and molecular systems. As representative benchmark applications, we present optical absorption calculations of various molecular and bulk systems and a real-time simulation of field-induced dynamics of a (ZnO)4 molecular cluster on a periodic graphene sheet. We present representative calculations on optical response of solids to infinitesimal external fields as well as real-time charge-transfer dynamics induced by strong pulsed laser fields. Due to the widespread use of the Python language, our RT-TDDFT implementation can be easily modified and provides a new capability in the PySCF code for real-time excited-state calculations of chemical and material systems.

Particulate matter 2.5 induces the skin barrier dysfunction and cutaneous inflammation via AhR- and T helper 17 cell-related genes in human skin tissue as identified via transcriptome analysis.

Particulate matter (PM2.5) is an environmental pollutant causing skin inflammatory diseases via epidermal barrier damage. However, the mechanism and related gene expression induced by PM2.5 remains unclear. Our aim was to determine the effect of PM2.5 on human skin tissue ex vivo, and elucidate the mechanism of T helper 17 cell-related inflammatory cytokine and skin barrier function. We verified the expression levels of gene in PM2.5-treated human skin tissue using Quantseq (3' mRNA-Seq), and Gene Ontology (GO) terms and protein-protein interaction (PPI) networks were performed. The PM2.5 treatment significantly enhanced the expression of Th 1, 2, 17 and 22 cell-related genes (cut-off value: │1.2 │ > fold change and p < 0.05). Most of all, Th17 cell-related genes are upregulated and those genes are associated with skin epidermal barrier function and Aryl hydrocarbon receptor (AhR), a xenobiotic receptor, pathway. In human keratinocyte cell lines, AhR-regulated genes (e.g. AhRR, CYP1A1, IL6 and IL36G), Th17 cell-related genes (e.g. IL17C) and epidermal barrier-related genes (e.g. SPRR2A and KRT71) are significantly increased after PM2.5. In the protein level, the secretion of IL-6 and IL-36G was increased in human skin tissue following PM2.5 treatment, and the expression of SPRR2A and KRT71 was significantly increased. PM2.5 exposure could ruin the skin epidermal barrier function via AhR- and Th17 cell-related inflammatory pathway.

Antibody production and characterization of the nucleoprotein of sever fever with thrombocytopenia syndrome virus (SFTSV) for effective diagnosis of SFTSV.

BACKGROUND: Severe fever with thrombocytopenia syndrome (SFTS) is an infectious disease caused by the Dabie bandavirus, [or SFTS virus (SFTSV)] that has become increasingly widespread since it was first reported in 2009. The SFTSV comprises three essential single-stranded RNA gene segments, with the S segment encoding the nucleocapsid (N) protein. Since the N protein is the most abundant and stable viral protein, it is a useful diagnostic marker of infection. Various SFTSV N-protein-based detection methods have been developed. However, given the limited research on antibodies of an SFTSV N-protein, here we report the characterization of the antibodies against SFTSV N protein especially their mapping results which is essential for more efficient and optimized detection of SFTSV. METHODS: To generate SFTSV-N-protein-specific monoclonal antibodies, recombinant full-length SFTSV N protein was expressed in E. coli, and the purified N protein was immunized to mice. The binding epitope positions of the antibodies generated were identified through binding-domain mapping. An antibody pair test using a lateral flow immunoassay (LFIA) was performed to identify effective diagnostic combinations of paired antibodies. RESULTS: Nine monoclonal antibodies specific for the SFTSV N protein were generated. Antibodies #3(B4E2) and #5(B4D9) were specific for sequential epitopes, while the remainder were specific for conformational epitopes. Antibody #4(C2G1) showed the highest affinity for the SFTSV N protein. The binding domain mapping results indicated the binding regions of the antibodies were divided into three groups. The antibody pair test demonstrated that #3(B4E2)/#4(C2G1) and #4(C2G1)/#5(B4D9) were effective antibody pairs for SFTSV diagnosis. CONCLUSIONS: Effective virus detection requires at least two strong antibodies recognizing separate epitope binding sites of the virus antigen. Here, we generated SFTSV-N-protein-specific monoclonal antibodies and subsequently performed epitope mapping and an antibody pair test to enhance the diagnostic efficiency and accuracy of SFTSV. Confirmation of epitope mappings and their combination immune response to the N protein provide valuable information for effective detection of SFTSV as well as can respond actively to detect a variant SFTSV.

Enhanced Oral Bioavailability of Rivaroxaban-Loaded Microspheres by Optimizing the Polymer and Surfactant Based on Molecular Interaction Mechanisms.

This study aimed to develop microspheres using water-soluble carriers and surfactants to improve the solubility, dissolution, and oral bioavailability of rivaroxaban (RXB). RXB-loaded microspheres with optimal carrier (poly(vinylpyrrolidone) K30, PVP) and surfactant (sodium lauryl sulfate (SLS)) ratios were prepared. 1H NMR and Fourier transform infrared (FTIR) analyses showed that drug-excipient and excipient-excipient interactions affected RXB solubility, dissolution, and oral absorption. Therefore, molecular interactions between RXB, PVP, and SLS played an important role in improving RXB solubility, dissolution, and oral bioavailability. Formulations IV and VIII, containing optimized RXB/PVP/SLS ratios (1:0.25:2 and 1:1:2, w/w/w), had significantly improved solubility by approximately 160- and 86-fold, respectively, compared to RXB powder, with the final dissolution rates improved by approximately 4.5- and 3.4-fold, respectively, compared to those of RXB powder at 120 min. Moreover, the oral bioavailability of RXB was improved by 2.4- and 1.7-fold, respectively, compared to that of RXB powder. Formulation IV showed the highest improvement in oral bioavailability compared to RXB powder (AUC, 2400.8 ± 237.1 vs 1002.0 ± 82.3 h·ng/mL). Finally, the microspheres developed in this study successfully improved the solubility, dissolution rate, and bioavailability of RXB, suggesting that formulation optimization with the optimal drug-to-excipient ratio can lead to successful formulation development.