ABSTRACT
Chemical erosion, one of the two major erosion processes along with mechanical erosion, occurs when a soluble rock-like salt, gypsum, or limestone is dissolved in contact with a water flow. The coupling between the geometry of the rocks, the mass transfer, and the flow leads to the formation of remarkable patterns, like scallop patterns in caves. We emphasize the common presence of very sharp shapes and spikes, despite the diversity of hydrodynamic conditions and the nature of the soluble materials. We explain the generic emergence of such spikes in dissolution processes by a geometrical approach. Singularities at the interface emerge as a consequence of the erosion directed in the normal direction, when the surface displays curvature variations, like those associated with a dissolution pattern. First, we demonstrate the presence of singular structures in natural interfaces shaped by dissolution. Then, we propose simple surface evolution models of increasing complexity demonstrating the emergence of spikes and allowing us to explain at long term by coarsening the formation of cellular structures. Finally, we perform a dissolution pattern experiment driven by solutal convection, and we report the emergence of a cellular pattern following well the model predictions. Although the precise prediction of dissolution shapes necessitates performing a complete hydrodynamic study, we show that the characteristic spikes which are reported ultimately for dissolution shapes are explained generically by geometrical arguments due to the surface evolution. These findings can be applied to other ablation patterns, reported for example in melting ice.
ABSTRACT
Modern dune fields are valuable sources of information for the large-scale analysis of terrestrial and planetary environments and atmospheres, but their study relies on understanding the small-scale dynamics that constantly generate new dunes and reshape older ones. Here, we designed a landscape-scale experiment at the edge of the Gobi desert, China, to quantify the development of incipient dunes under the natural action of winds. High-resolution topographic data documenting 42 mo of bedform dynamics are examined to provide a spectral analysis of dune pattern formation. We identified two successive phases in the process of dune growth, from the initial flat sand bed to a meter-high periodic pattern. We focus on the initial phase, when the linear regime of dune instability applies, and measure the growth rate of dunes of different wavelengths. We identify the existence of a maximum growth rate, which readily explains the mechanism by which dunes select their size, leading to the prevalence of a 15-m wavelength pattern. We quantitatively compare our experimental results with the prediction of the dune instability theory using transport and flow parameters independently measured in the field. The remarkable agreement between theory and observations demonstrates that the linear regime of dune growth is permanently expressed on low-amplitude bed topography, before larger regular patterns and slip faces eventually emerge. Our experiment underpins existing theoretical models for the early development of eolian dunes, which can now be used to provide reliable insights into atmospheric and surface processes on Earth and other planetary bodies.
ABSTRACT
When a fluid interface is subjected to a strong viscous flow, it tends to develop near-conical ends with pointed tips so sharp that their radius of curvature is undetectable. In microfluidic applications, tips can be made to eject fine jets, from which micrometer-sized drops can be produced. Here we show theoretically that the opening angle of the conical interface varies on a logarithmic scale as a function of the distance from the tip, owing to nonlocal coupling between the tip and the external flow. Using this insight we are able to show that the tip curvature grows like the exponential of the square of the strength of the external flow and to calculate the universal shape of the interface near the tip. Our experiments confirm the scaling of the tip curvature as well as of the interface's universal shape. Our analytical technique, based on an integral over the surface, may also have far wider applications, for example treating problems with electric fields, such as electrosprays.
ABSTRACT
The dissolution of rocks by rainfall commonly generates streamwise parallel channels, yet the occurrence of these natural patterns remains to be understood. Here, we report the emergence in the laboratory of a streamwise dissolution pattern at the surface of an initially flat soluble material, inclined and subjected to a thin runoff water flow. Nearly parallel grooves about 1 mm wide and directed along the main slope spontaneously form. Their width and depth increase continuously with time until their crests emerge and channelize the flow. Our observations may constitute the early stage of the patterns observed in the field.
ABSTRACT
The uplift of an initially flat elastic membrane by an upward viscous flow is investigated experimentally. The deformed shape of the membrane results from a balance between the flow pressure, the elastic response of the membrane, and the fluid weight. This last effect becomes non-negligible for a large enough deformed area. The usual theoretical approach supposes the presence of a prewetting film regularizing the viscous stresses according to Lister et al. [Phys. Rev. Lett. 111, 154501 (2013)PRLTAO0031-900710.1103/PhysRevLett.111.154501]. Nevertheless, in our experiments without prewetting films, the measurements are correctly described with this theory in the elastic regime. Microscale roughness of membranes could introduce an equivalent characteristic scale in the problem. An alternative explanation could be provided by the appearance of a fluid lag filled with gas, for which a new theoretical framework has been recently proposed by Ball and Neufeld [Phys. Rev. Fluids 3, 074101 (2018)2469-990X10.1103/PhysRevFluids.3.074101]. We compare the two approaches and find that both describe reasonably our experiments. However, consistency tests of both models show that the prewetting film model is more appropriate to describe our experimental data.
ABSTRACT
Raked linear dunes keep a constant orientation for considerable distances with a marked asymmetry between a periodic pattern of semi-crescentic structures on one side and a continuous slope on the other. Here we show that this shape is associated with a steady-state dune type arising from the coexistence of two dune growth mechanisms. Primary ridges elongate in the direction of the resultant sand flux. Semi-crescentic structures result from the development of superimposed dunes growing perpendicularly to the maximum gross bedform-normal transport. In the particular case of raked linear dunes, these two mechanisms produces primary and secondary ridges with similar height but with different orientations, which are oblique to each other. The raked pattern develops preferentially on the leeward side of the primary ridges according to the direction of propagation of the superimposed bedforms. As shown by numerical modelling, raked linear dunes occur where both these oblique orientations and dynamics are met.
ABSTRACT
The exploration of the phase diagram of a minimal model for barchan fields leads to the description of three distinct phases for the system: stationary, percolable, and unstable. In the stationary phase the system always reaches an out-of-equilibrium, fluctuating, stationary state, independent of its initial conditions. This state has a large and continuous range of dynamics, from dilute-where dunes do not interact-to dense, where the system exhibits both spatial structuring and collective behavior leading to the selection of a particular size for the dunes. In the percolable phase, the system presents a percolation threshold when the initial density increases. This percolation is unusual, as it happens on a continuous space for moving, interacting, finite lifetime dunes. For extreme parameters, the system exhibits a subcritical instability, where some of the dunes in the field grow without bound. We discuss the nature of the asymptotic states and their relations to well-known models of statistical physics.
ABSTRACT
New evidence indicates that sand availability does not only control dune type but also the underlying dune growth mechanism and the subsequent dune orientation. Here we numerically investigate the development of bedforms in bidirectional wind regimes for two different conditions of sand availability: an erodible sand bed or a localized sand source on a non-erodible ground. These two conditions of sand availability are associated with two independent dune growth mechanisms and, for both of them, we present the complete phase diagrams of dune shape and orientation. On an erodible sand bed, linear dunes are observed over the entire parameter space. Then, the divergence angle and the transport ratio between the two winds control dune orientation and dynamics. For a localized sand source, different dune morphologies are observed depending on the wind regime. There are systematic transitions in dune shape from barchans to linear dunes extending away from the localized sand source, and vice-versa. These transitions are captured fairly by a new dimensionless parameter, which compares the ability of winds to build the dune topography in the two modes of dune orientation.
ABSTRACT
Shape is one of the important characteristics for the structures observed in living organisms. Whereas biologists have proposed models where the shape is controlled on a molecular level [1], physicists, following Turing [2] and d'Arcy Thomson [3], have developed theories where patterns arise spontaneously [4]. Here, we propose that volume constraints restrict the possible shapes of leaves. Focusing on palmate leaves (with lobes), the central observation is that developing leaves first grow folded inside a bud, limited by the previous and subsequent leaves. We show that the lobe perimeters end at the border of this small volume. This induces a direct relationship between the way it was folded and the final unfolded shape of the leaf. These dependencies can be approximated as simple geometrical relationships that we confirm on both folded embryonic and unfolded mature leaves. We find that independent of their position in the phylogenetic tree, these relationships work for folded species, but do not work for non-folded species. This global regulation for the leaf growth could come from a mechanical steric constraint. Such steric regulation should be more general and considered as a new simple means of global regulation.
Subject(s)
Gene Expression Regulation, Plant , Plant Leaves/physiology , Algorithms , Computer Simulation , Genes, Plant , Microscopy, Electron, Scanning/methods , Models, Biological , Models, Theoretical , Phylogeny , Plant Physiological Phenomena , Plants/metabolism , SoftwareABSTRACT
Three regimes of granular avalanches in fluids are put in light depending on the Stokes number St which prescribes the relative importance of grain inertia and fluid viscous effects and on the grain/fluid density ratio r. In gas (r>>1 and St>1, e.g., the dry case), the amplitude and time duration of avalanches do not depend on any fluid effect. In liquids (r approximately 1), for decreasing St, the amplitude decreases and the time duration increases, exploring an inertial regime and a viscous regime. These three regimes are described by the analysis of the elementary motion of one grain.