ABSTRACT
AIMS: Endurance athletes develop cardiac remodeling to cope with increased cardiac output during exercise. This remodeling is both anatomical and functional and shows large interindividual variability. In this study, we quantify local geometric ventricular remodeling related to long-standing endurance training and assess its relationship with cardiovascular performance during exercise. METHODS: We extracted 3D models of the biventricular shape from end-diastolic cine magnetic resonance images acquired from a cohort of 89 triathlon athletes and 77 healthy sedentary subjects. Additionally, the athletes underwent cardio-pulmonary exercise testing, together with an echocardiographic study at baseline and few minutes after maximal exercise. We used statistical shape analysis to identify regional bi-ventricular shape differences between athletes and non-athletes. RESULTS: The ventricular shape was significantly different between athletes and controls (p < 1e-6). The observed regional remodeling in the right heart was mainly a shift of the right ventricle (RV) volume distribution towards the right ventricular infundibulum, increasing the overall right ventricular volume. In the left heart, there was an increment of left ventricular mass and a dilation of the left ventricle. Within athletes, the amount of such remodeling was independently associated to higher peak oxygen pulse (p < 0.001) and weakly with greater post-exercise RV free wall longitudinal strain (p = 0.03). CONCLUSIONS: We were able to identify specific bi-ventricular regional remodeling induced by long-lasting endurance training. The amount of remodeling was associated with better cardiopulmonary performance during an exercise test.
Subject(s)
Exercise Tolerance/physiology , Exercise/physiology , Heart/diagnostic imaging , Physical Endurance/physiology , Ventricular Remodeling/physiology , Adult , Athletes , Echocardiography , Endurance Training , Exercise Test , Female , Heart Rate/physiology , Humans , Magnetic Resonance Imaging, Cine , Male , Middle Aged , Oxygen Consumption/physiology , Young AdultABSTRACT
Myocardial tissue tracking imaging techniques have been developed for a more accurate evaluation of myocardial deformation (i.e. strain), with the potential to overcome the limitations of ejection fraction (EF) and to contribute, incremental to EF, to the diagnosis and prognosis in cardiac diseases. While most of the deformation imaging techniques are based on the similar principles of detecting and tracking specific patterns within an image, there are intra- and inter-imaging modality inconsistencies limiting the wide clinical applicability of strain. In this review, we aimed to describe the particularities of the echocardiographic and cardiac magnetic resonance deformation techniques, in order to understand the discrepancies in strain measurement, focusing on the potential sources of variation: related to the software used to analyse the data, to the different physics of image acquisition and the different principles of 2D vs. 3D approaches. As strain measurements are not interchangeable, it is highly desirable to work with validated strain assessment tools, in order to derive information from evidence-based data. There is, however, a lack of solid validation of the current tissue tracking techniques, as only a few of the commercial deformation imaging softwares have been properly investigated. We have, therefore, addressed in this review the neglected issue of suboptimal validation of tissue tracking techniques, in order to advocate for this matter.
Subject(s)
Echocardiography, Three-Dimensional/methods , Heart Diseases/diagnostic imaging , Image Interpretation, Computer-Assisted , Magnetic Resonance Imaging, Cine/methods , Stroke Volume/physiology , Cardiac Imaging Techniques , Female , Heart Diseases/physiopathology , Humans , Male , Myocardial Contraction/physiology , Reproducibility of Results , SoftwareABSTRACT
The use of synthetic sequences is one of the most promising tools for advanced in silico evaluation of the quantification of cardiac deformation and strain through 3-D ultrasound (US) and magnetic resonance (MR) imaging. In this paper, we propose the first simulation framework which allows the generation of realistic 3-D synthetic cardiac US and MR (both cine and tagging) image sequences from the same virtual patient. A state-of-the-art electromechanical (E/M) model was exploited for simulating groundtruth cardiac motion fields ranging from healthy to various pathological cases, including both ventricular dyssynchrony and myocardial ischemia. The E/M groundtruth along with template MR/US images and physical simulators were combined in a unified framework for generating synthetic data. We efficiently merged several warping strategies to keep the full control of myocardial deformations while preserving realistic image texture. In total, we generated 18 virtual patients, each with synthetic 3-D US, cine MR, and tagged MR sequences. The simulated images were evaluated both qualitatively by showing realistic textures and quantitatively by observing myocardial intensity distributions similar to real data. In particular, the US simulation showed a smoother myocardium/background interface than the state-of-the-art. We also assessed the mechanical properties. The pathological subjects were discriminated from the healthy ones by both global indexes (ejection fraction and the global circumferential strain) and regional strain curves. The synthetic database is comprehensive in terms of both pathology and modality, and has a level of realism sufficient for validation purposes. All the 90 sequences are made publicly available to the research community via an open-access database.
Subject(s)
Computer Simulation , Echocardiography/methods , Magnetic Resonance Imaging/methods , Models, Cardiovascular , Algorithms , Humans , Movement/physiology , Phantoms, ImagingABSTRACT
Atlas registration is a recognized paradigm for the automatic segmentation of normal MR brain images. Unfortunately, atlas-based segmentation has been of limited use in presence of large space-occupying lesions. In fact, brain deformations induced by such lesions are added to normal anatomical variability and they may dramatically shift and deform anatomically or functionally important brain structures. In this work, we chose to focus on the problem of inter-subject registration of MR images with large tumors, inducing a significant shift of surrounding anatomical structures. First, a brief survey of the existing methods that have been proposed to deal with this problem is presented. This introduces the discussion about the requirements and desirable properties that we consider necessary to be fulfilled by a registration method in this context: To have a dense and smooth deformation field and a model of lesion growth, to model different deformability for some structures, to introduce more prior knowledge, and to use voxel-based features with a similarity measure robust to intensity differences. In a second part of this work, we propose a new approach that overcomes some of the main limitations of the existing techniques while complying with most of the desired requirements above. Our algorithm combines the mathematical framework for computing a variational flow proposed by Hermosillo et al. [G. Hermosillo, C. Chefd'Hotel, O. Faugeras, A variational approach to multi-modal image matching, Tech. Rep., INRIA (February 2001).] with the radial lesion growth pattern presented by Bach et al. [M. Bach Cuadra, C. Pollo, A. Bardera, O. Cuisenaire, J.-G. Villemure, J.-Ph. Thiran, Atlas-based segmentation of pathological MR brain images using a model of lesion growth, IEEE Trans. Med. Imag. 23 (10) (2004) 1301-1314.]. Results on patients with a meningioma are visually assessed and compared to those obtained with the most similar method from the state-of-the-art.
Subject(s)
Brain/pathology , Image Interpretation, Computer-Assisted , Magnetic Resonance Imaging , HumansABSTRACT
Quantification of cardiac deformation and strain with 3D ultrasound takes considerable research efforts. Nevertheless, a widespread use of these techniques in clinical practice is still held back due to the lack of a solid verification process to quantify and compare performance. In this context, the use of fully synthetic sequences has become an established tool for initial in silico evaluation. Nevertheless, the realism of existing simulation techniques is still too limited to represent reliable benchmarking data. Moreover, the fact that different centers typically make use of in-house developed simulation pipelines makes a fair comparison difficult. In this context, this paper introduces a novel pipeline for the generation of synthetic 3D cardiac ultrasound image sequences. State-of-the art solutions in the fields of electromechanical modeling and ultrasound simulation are combined within an original framework that exploits a real ultrasound recording to learn and simulate realistic speckle textures. The simulated images show typical artifacts that make motion tracking in ultrasound challenging. The ground-truth displacement field is available voxelwise and is fully controlled by the electromechanical model. By progressively modifying mechanical and ultrasound parameters, the sensitivity of 3D strain algorithms to pathology and image properties can be evaluated. The proposed pipeline is used to generate an initial library of 8 sequences including healthy and pathological cases, which is made freely accessible to the research community via our project web-page.
ABSTRACT
We propose a technique for myocardial motion estimation based on image registration using both B-mode echocardiographic images and tissue Doppler sequences acquired interleaved. The velocity field is modeled continuously using B-splines and the spatiotemporal transform is constrained to be diffeomorphic. Images before scan conversion are used to improve the accuracy of the estimation. The similarity measure includes a model of the speckle pattern distribution of B-mode images. It also penalizes the disagreement between tissue Doppler velocities and the estimated velocity field. Registration accuracy is evaluated and compared to other alternatives using a realistic synthetic dataset, obtaining mean displacement errors of about 1 mm. Finally, the method is demonstrated on data acquired from six volunteers, both at rest and during exercise. Robustness is tested against low image quality and fast heart rates during exercise. Results show that our method provides a robust motion estimate in these situations.
Subject(s)
Echocardiography, Doppler/methods , Heart/physiology , Image Processing, Computer-Assisted/methods , Adult , Female , Heart Ventricles/anatomy & histology , Heart Ventricles/diagnostic imaging , Humans , Male , Movement/physiology , Reproducibility of Results , Ventricular Function/physiology , Young AdultABSTRACT
This paper evaluates five 3D ultrasound tracking algorithms regarding their ability to quantify abnormal deformation in timing or amplitude. A synthetic database of B-mode image sequences modeling healthy, ischemic and dyssynchrony cases was generated for that purpose. This database is made publicly available to the community. It combines recent advances in electromechanical and ultrasound modeling. For modeling heart mechanics, the Bestel-Clement-Sorine electromechanical model was applied to a realistic geometry. For ultrasound modeling, we applied a fast simulation technique to produce realistic images on a set of scatterers moving according to the electromechanical simulation result. Tracking and strain accuracies were computed and compared for all evaluated algorithms. For tracking, all methods were estimating myocardial displacements with an error below 1 mm on the ischemic sequences. The introduction of a dilated geometry was found to have a significant impact on accuracy. Regarding strain, all methods were able to recover timing differences between segments, as well as low strain values. On all cases, radial strain was found to have a low accuracy in comparison to longitudinal and circumferential components.
Subject(s)
Biomechanical Phenomena/physiology , Echocardiography, Three-Dimensional/methods , Models, Cardiovascular , Algorithms , Computer Simulation , Heart/anatomy & histology , Heart/physiology , Heart/physiopathology , Humans , Myocardial Ischemia/diagnostic imaging , Myocardial Ischemia/pathology , Myocardial Ischemia/physiopathology , Myocardium/pathology , Reproducibility of ResultsABSTRACT
The anatomy and motion of the heart and the aorta are essential for patient-specific simulations of cardiac electrophysiology, wall mechanics and hemodynamics. Within the European integrated project euHeart, algorithms have been developed that allow to efficiently generate patient-specific anatomical models from medical images from multiple imaging modalities. These models, for instance, account for myocardial deformation, cardiac wall motion, and patient-specific tissue information like myocardial scar location. Furthermore, integration of algorithms for anatomy extraction and physiological simulations has been brought forward. Physiological simulations are linked closer to anatomical models by encoding tissue properties, like the muscle fibers, into segmentation meshes. Biophysical constraints are also utilized in combination with image analysis to assess tissue properties. Both examples show directions of how physiological simulations could provide new challenges and stimuli for image analysis research in the future.
Subject(s)
Aorta/anatomy & histology , Aorta/physiology , Heart/anatomy & histology , Heart/physiology , Models, Cardiovascular , Algorithms , Computer Simulation , Coronary Angiography , Electrophysiologic Techniques, Cardiac , Hemodynamics , Humans , Imaging, Three-Dimensional , Magnetic Resonance Angiography , Precision MedicineABSTRACT
In this paper we present a benchmarking framework for the validation of cardiac motion analysis algorithms. The reported methods are the response to an open challenge that was issued to the medical imaging community through a MICCAI workshop. The database included magnetic resonance (MR) and 3D ultrasound (3DUS) datasets from a dynamic phantom and 15 healthy volunteers. Participants processed 3D tagged MR datasets (3DTAG), cine steady state free precession MR datasets (SSFP) and 3DUS datasets, amounting to 1158 image volumes. Ground-truth for motion tracking was based on 12 landmarks (4 walls at 3 ventricular levels). They were manually tracked by two observers in the 3DTAG data over the whole cardiac cycle, using an in-house application with 4D visualization capabilities. The median of the inter-observer variability was computed for the phantom dataset (0.77 mm) and for the volunteer datasets (0.84 mm). The ground-truth was registered to 3DUS coordinates using a point based similarity transform. Four institutions responded to the challenge by providing motion estimates for the data: Fraunhofer MEVIS (MEVIS), Bremen, Germany; Imperial College London - University College London (IUCL), UK; Universitat Pompeu Fabra (UPF), Barcelona, Spain; Inria-Asclepios project (INRIA), France. Details on the implementation and evaluation of the four methodologies are presented in this manuscript. The manually tracked landmarks were used to evaluate tracking accuracy of all methodologies. For 3DTAG, median values were computed over all time frames for the phantom dataset (MEVIS=1.20mm, IUCL=0.73 mm, UPF=1.10mm, INRIA=1.09 mm) and for the volunteer datasets (MEVIS=1.33 mm, IUCL=1.52 mm, UPF=1.09 mm, INRIA=1.32 mm). For 3DUS, median values were computed at end diastole and end systole for the phantom dataset (MEVIS=4.40 mm, UPF=3.48 mm, INRIA=4.78 mm) and for the volunteer datasets (MEVIS=3.51 mm, UPF=3.71 mm, INRIA=4.07 mm). For SSFP, median values were computed at end diastole and end systole for the phantom dataset(UPF=6.18 mm, INRIA=3.93 mm) and for the volunteer datasets (UPF=3.09 mm, INRIA=4.78 mm). Finally, strain curves were generated and qualitatively compared. Good agreement was found between the different modalities and methodologies, except for radial strain that showed a high variability in cases of lower image quality.
Subject(s)
Algorithms , Databases, Factual/standards , Echocardiography/standards , Heart/physiology , Imaging, Three-Dimensional/standards , Magnetic Resonance Imaging/standards , Movement , Adult , Benchmarking , Cardiac-Gated Imaging Techniques/standards , Europe , Healthy Volunteers , Heart/anatomy & histology , Humans , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
This manuscript describes our recent developments towards better understanding of the mechanisms amenable to cardiac resynchronization therapy response. We report the results from a full multimodal dataset corresponding to eight patients from the euHeart project. The datasets include echocardiography, MRI and electrophysiological studies. We investigate two aspects. The first one focuses on pre-operative multimodal image data. From 2D echocardiography and 3D tagged MRI images, we compute atlas based dyssynchrony indices. We complement these indices with presence and extent of scar tissue and correlate them with CRT response. The second one focuses on computational models. We use pre-operative imaging to generate a patient-specific computational model. We show results of a fully automatic personalized electromechanical simulation. By case-per-case discussion of the results, we highlight the potential and key issues of this multimodal pipeline for the understanding of the mechanisms of CRT response and a better patient selection.
Subject(s)
Cardiac Resynchronization Therapy , Electrocardiography , Imaging, Three-Dimensional , Magnetic Resonance Imaging , Models, Cardiovascular , Precision Medicine , Adult , Aged , Computer Simulation , Humans , Middle Aged , Patient SelectionABSTRACT
Image registration has been proposed as an automatic method for recovering cardiac displacement fields from tagged Magnetic Resonance Imaging (tMRI) sequences. Initially performed as a set of pairwise registrations, these techniques have evolved to the use of 3D+t deformation models, requiring metrics of joint image alignment (JA). However, only linear combinations of cost functions defined with respect to the first frame have been used. In this paper, we have applied k-Nearest Neighbors Graphs (kNNG) estimators of the α-entropy (H(α)) to measure the joint similarity between frames, and to combine the information provided by different cardiac views in an unified metric. Experiments performed on six subjects showed a significantly higher accuracy (p<0.05) with respect to a standard pairwise alignment (PA) approach in terms of mean positional error and variance with respect to manually placed landmarks. The developed method was used to study strains in patients with myocardial infarction, showing a consistency between strain, infarction location, and coronary occlusion. This paper also presents an interesting clinical application of graph-based metric estimators, showing their value for solving practical problems found in medical imaging.
Subject(s)
Artifacts , Cardiac-Gated Imaging Techniques/methods , Elasticity Imaging Techniques/methods , Image Interpretation, Computer-Assisted/methods , Magnetic Resonance Imaging, Cine/methods , Myocardial Infarction/diagnosis , Myocardial Infarction/physiopathology , Elastic Modulus , Humans , Image Enhancement/methods , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
Computational models of the heart at various scales and levels of complexity have been independently developed, parameterised and validated using a wide range of experimental data for over four decades. However, despite remarkable progress, the lack of coordinated efforts to compare and combine these computational models has limited their impact on the numerous open questions in cardiac physiology. To address this issue, a comprehensive dataset has previously been made available to the community that contains the cardiac anatomy and fibre orientations from magnetic resonance imaging as well as epicardial transmembrane potentials from optical mapping measured on a perfused ex-vivo porcine heart. This data was used to develop and customize four models of cardiac electrophysiology with different level of details, including a personalized fast conduction Purkinje system, a maximum a posteriori estimation of the 3D distribution of transmembrane potential, the personalization of a simplified reaction-diffusion model, and a detailed biophysical model with generic conduction parameters. This study proposes the integration of these four models into a single modelling and simulation pipeline, after analyzing their common features and discrepancies. The proposed integrated pipeline demonstrates an increase prediction power of depolarization isochrones in different pacing conditions.
Subject(s)
Electrophysiological Phenomena , Heart/physiology , Magnetic Resonance Imaging , Models, Biological , Animals , Biophysical Phenomena , Diffusion , Heart/anatomy & histology , In Vitro Techniques , Membrane Potentials , Pericardium/anatomy & histology , Pericardium/cytology , Pericardium/physiology , Purkinje Fibers/anatomy & histology , Purkinje Fibers/cytology , Purkinje Fibers/physiology , Reproducibility of Results , Swine , Systems Integration , Time FactorsABSTRACT
The quantification of wall motion in cerebral aneurysms is becoming important owing to its potential connection to rupture, and as a way to incorporate the effects of vascular compliance in computational fluid dynamics simulations. Most of papers report values obtained with experimental phantoms, simulated images or animal models, but the information for real patients is limited. In this paper, we have combined non-rigid registration with signal processing techniques to measure pulsation in real patients from high frame rate digital subtraction angiography. We have obtained physiological meaningful waveforms with amplitudes in the range 0 mm-0.3 mm for a population of 18 patients including ruptured and unruptured aneurysms. Statistically significant differences in pulsation were found according to the rupture status, in agreement with differences in biomechanical properties reported in the literature.
Subject(s)
Blood Vessels/physiopathology , Intracranial Aneurysm/physiopathology , Movement , Adult , Aged , Aneurysm, Ruptured/diagnostic imaging , Aneurysm, Ruptured/physiopathology , Angiography, Digital Subtraction , Biomechanical Phenomena , Female , Humans , Intracranial Aneurysm/diagnostic imaging , Male , Middle Aged , Signal Processing, Computer-AssistedABSTRACT
In the last few years, some of the visionary concepts behind the virtual physiological human began to be demonstrated on various clinical domains, showing great promise for improving healthcare management. In the current work, we provide an overview of image- and biomechanics-based techniques that, when put together, provide a patient-specific pipeline for the management of intracranial aneurysms. The derivation and subsequent integration of morphological, morphodynamic, haemodynamic and structural analyses allow us to extract patient-specific models and information from which diagnostic and prognostic descriptors can be obtained. Linking such new indices with relevant clinical events should bring new insights into the processes behind aneurysm genesis, growth and rupture. The development of techniques for modelling endovascular devices such as stents and coils allows the evaluation of alternative treatment scenarios before the intervention takes place and could also contribute to the understanding and improved design of more effective devices. A key element to facilitate the clinical take-up of all these developments is their comprehensive validation. Although a number of previously published results have shown the accuracy and robustness of individual components, further efforts should be directed to demonstrate the diagnostic and prognostic efficacy of these advanced tools through large-scale clinical trials.
Subject(s)
Disease Management , Intracranial Aneurysm/therapy , Aneurysm, Ruptured/diagnosis , Aneurysm, Ruptured/therapy , Biomechanical Phenomena , Cerebral Angiography , Diagnostic Imaging , Equipment and Supplies , Hemodynamics , Humans , Image Interpretation, Computer-Assisted , Intracranial Aneurysm/diagnosis , Intracranial Aneurysm/diagnostic imaging , Intracranial Aneurysm/physiopathology , Models, Anatomic , Models, Biological , Movement , Precision Medicine , Prognosis , Stents , User-Computer InterfaceABSTRACT
This paper presents a complete method estimating the displacement field of bodies constrained by an articulated model such as the neck area. Indeed bony structures between different patient images, such as vertebras, may rigidly move while other tissues may deform. The method is divided into 3 steps. The method first registers the articulated rigid bodies together. Then it propagates the deformation into the whole volume through the use of a tetrahedral mesh and it finishes the registration using a mutual information based optical flow. Following the ITK framework, it uses a fast stochastic gradient descent optimization strategy chosen to maximize the mutual information metric. We demonstrate this method provides accurate results on 3D CT, MR and PET images.