ABSTRACT
The preparation of an amino-functionalized hybrid monolithic column (TEOS-co-AEAPTES) via one-pot co-condensation of tetraethoxysilane (TEOS) and N-(ß-aminoethyl)-γ-aminopropyltriethoxysilane (AEAPTES) in a capillary is descibed. It was used as solid-phase microextraction (SPME) matrix followed by inductively coupled plasma-mass spectrometry (ICP-MS) for determination of trace metals. Under optimum conditions, the amino-functionalized SPME material can simultaneously retain Cu(II), Zn(II), Au(III), and Pb(II) with adsorption capacities of 148, 60, 81, and 64 µg m-1, respectively. Subsequently, these four metal ions can be quantitatively eluted using 1 mol L-1 HNO3 containing 1% thiourea. The retention mechanism of Cu(II), Zn(II), Au(III), and Pb(II) on the amino-functionalized hybrid monolith was explained as the combination of electrostatic and coordination interactions. With a 10-fold enrichment factor, the calibration curves were established in the range 0.5-100 µg L-1 with linear correlation coefficients above 0.9943 and the limits of quantitation were 0.05 µg L-1 for four target analytes. The limits of detection were 0.006, 0.012, 0.004, and 0.007 µg L-1 for Cu(II), Zn(II), Au(III), and Pb(II), respectively. The protocol was validated by analyzing Certified Reference Materials including standard sediment, soil, and nickel ore, and the results were in good agreement with their certified values. The relative standard deviations of the method were in the range 0.22-17.6%. The recoveries of the four metal ions in spiked samples were in the range 88.0-113.8%. Compared to direct ICP-MS determination, the proposed in-tube SPME procedure can effectively eliminate the interference from complex matrix, especially from those ores with very high content of main metal to improve the accuracy of analysis. Therefore the method is suitable for the simultaneous determination of ultra-trace Cu(II), Zn(II), Au(III), and Pb(II) in environmental and mineral samples. Graphical abstract The preparation of the TEOS-co-AEAPTES monolithic column and the SPME procedure of Cu(II), Zn(II), Au(III), and Pb(II).
ABSTRACT
In this work, a novel amino functionalized Cu(II) ion-imprinted organic-inorganic hybrid monolithic column (Cu(II)-IIHMC) was prepared via one-pot co-condensation and the combination of sol-gel and ion-imprinting techniques in a fused capillary. The Cu(II)-IIHMC was used as solid phase microextraction (SPME) matrix followed by inductively coupled plasma-mass spectrometry (ICP-MS) for the analysis of trace Cu(II). The prepared Cu(II)-IIHMC has good mechanical strength, stable imprinting sites and homogeneous structure of network skeleton with large flow-through pores by optimizing the synthesis process. Under the optimized conditions, the Cu(II)-IIHMC can selectively adsorb Cu(II) with the adsorption capacity of 3.13 mg g-1. With enrichment factor of 10-fold, the calibration curve was established in the range of 0.05-50 µg L-1 with r2 of 0.9992 and the detection limit was 0.008 µg L-1 for Cu(II). Compared with the non-imprinted hybrid monolithic column (Cu(II)-NIHMC), the Cu(II)-IIHMC possesses better selectivity, anti-interference ability and adsorption capacity. The Cu(II)-IIHMC can specifically capture the target ion in the presence of competitive ions, with the selectivity coefficients exceeding 39.4. The protocol was validated by analyzing Certified Reference Materials of standard sediment, soil and iron ore, and the results were in good agreement with certified values. Moreover, the proposed in-tube SPME procedure can not only preconcentrate trace Cu(II), but also effectively reduce the matrix effect and powerfully eliminate the interference from the main metals in real samples. Therefore, the developed SPME-ICP-MS method with facile preparation, specific selectivity, high sensitivity and efficient analysis, was applied in the determination of trace Cu(II) in environmental and mineral samples with the recoveries of 89.8-111.8% in all spiked samples.
ABSTRACT
A novel amine- and carboxyl-bifunctionalized organic-inorganic hybrid monolithic column (A&C-HMC) was synthesized via one-pot co-condensation of N-(2-aminoethyl)-3-aminopropyltriethoxysilane, carboxyethylsilanetriol sodium salt and tetramethoxysilane with cetyltrimethylammonium bromide and polyethylene glycol 6000 as binary porogens in this work. The introduction of the binary porogens controllably improved the morphology and pore structure of A&C-hybrid monolith (HM) and made the active sites of amine and carboxyl groups more prolific, compared with the monolith prepared with either of porogens. It is found that Cr(VI) and Cr(III) can be selectively adsorbed on A&C-HM under different pH ranges, and eluted by aqueous nitric acid solution completely. The A&C-HMC was used as needle-solid phase microextraction (SPME) matrix for direct separation and enrichment of inorganic chromium species coupled with inductively coupled plasma mass spectrometer without any oxidation/reduction treatment. Various parameters of SPME operation and analytical performance were investigated systematically, and the adsorption mechanism was also discussed and explained in depth. In view of the advantages of facile preparation, low cost, excellent speciation selectivity and high adsorption capacity to Cr(VI) and Cr(III), the A&C-HMC based SPME protocol is a promising alternative for non-disturbed speciation analysis of inorganic chromium in real environmental water samples.