Magneto-optical-like effect in tight focusing of azimuthally polarized sine-Gaussian beams.

Magneto-optical effects, which have been known for over a century, are among the most fundamental phenomena in physics and describe changes in the polarization state of light when it interacts with magnetic materials. When a polarized plane wave propagates in or through a homogeneous and isotropic transparent medium, it is generally accepted that its transverse polarization structure remains unchanged. However, we show that a strong radial polarization component can be generated when an azimuthally polarized sine-Gaussian plane wave is tightly focused by a high numerical aperture lens, resulting in a magneto-optical-like effect that does not require external magnetic field or magnetic medium. Calculations show that the intensity structure and polarization distribution of the highly confined electric field strongly depend on the parameters m and φ0 in the sinusoidal term, where m can be used to control the number of the multifocal spots and φ0 can be used to control the position of each focal spot. Finally, we show that this peculiar electric field distribution can be used to realize multiple particles trapping with controllable numbers and locations.

Time-varying optical spin-orbit Hall effect in tightly focused femtosecond optical field.

The spin-orbit Hall effect (HE) is dominated by the law of conservation of angular momentum of a beam and is highly significant in light-matter interactions. The electromagnetic field, phase, topological structure, and spin-orbit HE of an azimuthally polarized vortex pulse beam in a tightly focused system are studied theoretically here. Calculations show that the focal field has ultrafast bright-dark alternating characteristics and a distorted phase distribution. Furthermore, the time evolution of the polarization singularity in the focused light field is explained using Stokes parameters. Importantly, the spin-orbit HE of the pulsed beam is shown to be time-varying in a tightly focused system. This time-varying spin-orbit HE is particularly sensitive to the pulse width and central wavelength. Our method has important applications in particle manipulation.

ThCr2Si2C: An Antiferromagnetic Metal with a Cr2C Square Lattice.

A quaternary compound, ThCr2Si2C, was synthesized by using the arc-melting technique. The compound adopts a tetragonal CeCr2Si2C-type crystal structure. The electronic resistivity and specific heat data exhibit metallic behavior, while the magnetic susceptibility displays a pronounced broad peak at around 370 K, indicating the antiferromagnetic phase transition. The first-principles calculations suggest A-type antiferromagnetic ordering of the Cr sublattice, which is confirmed by neutron diffraction experiments. By comparing the crystal structure of ThCr2Si2C with the isostructural Cr-based compounds, the magnetic state of Cr 3d orbital is discussed in terms of the band-filling effects and indirect spin exchange interaction.

Germanene saturable absorber for mode-locked operation in an all-fiber laser with multiple dispersion environments.

In this paper, a high-quality germanene-polyvinyl alcohol (PVA) saturable absorber (SA) with a modulation depth of 3.05% and a saturation intensity of 17.95M W/c m 2 was prepared. Stable conventional mode-locking and harmonic mode-locking (HML) were achieved in germanene-based Er-doped fiber lasers (EDFL) using dispersion management techniques. In a cavity with a net dispersion value of -0.22p s 2, the conventional soliton had a center wavelength of 1558.2 nm, a repetition frequency of 19.09 MHz, and a maximum 3 dB spectrum bandwidth of 3.5 nm. The highest repetition frequencies achieved in cavities with net dispersion values of -2.81p s 2, -1.73p s 2, and -1.09p s 2 were 9.48 MHz, 12.75 MHz, and 12.10 MHz for HML, respectively. Furthermore, the effects of dispersion, power, and the polarization state on HML were systematically investigated. Our research results fully demonstrate the capability of germanene as an optical modulator in generating conventional mode-locked and harmonic mode-locked solitons. This provides meaningful references for promoting its application in ultrafast fiber lasers.

Nanosized indium selenide saturable absorber for multiple solitons operation in Er3+-doped fiber laser.

With the advances in the field of ultrafast photonics occurring so fast, the demand for optical modulation devices with high performance and soliton lasers which can realize the evolution of multiple soliton pulses is gradually increasing. Nevertheless, saturable absorbers (SAs) with appropriate parameters and pulsed fiber lasers which can output abundant mode-locking states still need to be further explored. Due to the special band gap energy values of few-layer indium selenide (InSe) nanosheets, we have prepared a SA based on InSe on a microfiber by optical deposition. In addition, we demonstrate that our prepared SA possesses a modulation depth and saturable absorption intensity about 6.87% and 15.83 MW/cm2, respectively. Then, multiple soliton states are obtained by dispersion management techniques, including regular solitons, and second-order harmonic mode-locking solitons. Meanwhile, we have obtained multi-pulse bound state solitons. We also provide theoretical basis for the existence of these solitons. The results of the experiment show that the InSe has the potential to be an excellent optical modulator because of its excellent saturable absorption properties. This work also is important for improving the understanding and knowledge of InSe and the output performance of fiber lasers.

Propagation dynamics of the controllable circular Airyprime beam in the Kerr medium.

In this paper, we study the propagation dynamics of the circular Airyprime beam (CAPB) in the Kerr medium for the first time. We investigate the effects of the astigmatism factor, the chirp factor, and vortices on the CAPB propagating in the Kerr medium. At the same time, we are also introducing a special-shaped Airyprime beam (SAPB) during its propagation. The transmission characteristics of the CAPB and the SAPB in the Kerr medium are compared under identical conditions. Our theoretical results provide additional possibilities for CAPB modulation in the Kerr medium, thereby promising wider applicability of CAPB in various research areas.

Evolution between bright and dark pulses in a MoxW1-xTe2 based fiber laser.

We proposed an erbium-doped fiber laser mode-locked with a MoxW1-xTe2-based nonlinear optical modulator for the first time to our best knowledge. This fiber laser can deliver bright pulses, bright-dark pulse pairs, dark pulses, bright-dark-bright pulses, and dark-dark-bright pulses. The modulation depth and saturation intensity of the MoxW1-xTe2-based saturable absorber were about 7.8% and 8.6 MW/cm2, respectively. When 10% of the laser in the cavity was output, conventional soliton pulses with central wavelength of 1560.1 nm can be obtained in the cavity. When 70% of the laser was output, dual-wavelength domain-wall dark pulses appeared in the laser cavity. This experiment revealed that an appropriate increase in the ratio of output energy can improve the chance of dark pulses in fiber lasers. The mode-locking states in this fiber laser can evolve with each other between bright pulses, bright-dark pulse pairs and dark pulses by adjusting the polarization controller. The results indicated that the MoxW1-xTe2 can be used to make modulators for generating dark pulses. Furthermore, our work will be of great help to improve the chance of the generation of dark pulse in fiber lasers.

Dual-shearing interferometer for multi-modal hyperspectral imaging.

A dual-shearing interferometer (DSI) for multimodal hyperspectral imaging is presented. Two orthogonally stacked pairs of coherent beams are generated by a pair of novel, to the best of our knowledge, birefringent lateral shearing splitters. Consequently, two sets of interferograms with full pixel resolution are captured alternately in a time sequence in the double Nyquist frequency mode. Modals of dual-field-of-view hyperspectral imaging and differential-polarization hyperspectral imaging are introduced, and verification experiments are performed. The feasibility of other modals is discussed. The proposed method can effectively improve the instrument's performance in terms of the field of view, polarization, spectral resolution, and spectral range.

Generation of bright-dark solitons in an Er-doped fiber laser employing InSb as a saturable absorber.

In this paper, an indium antimonide (InSb) saturable absorber (SA) was successfully fabricated. The saturable absorption properties of the InSb SA were studied, and they show a modulation depth and a saturable intensity of 5.17% and 9.23M W/c m 2, respectively. By employing the InSb SA and building the ring cavity laser structure, the bright-dark soliton operations were successfully obtained by increasing the pump power to 100.4 mW and adjusting the polarization controller. As the pump power increased from 100.4 to 180.3 mW, the average output power increased from 4.69 to 9.42 mW, the corresponding fundamental repetition rate was 2.85 MHz, and the signal-to-noise ratio was 68 dB. The experimental results show that InSb with excellent saturable absorption characteristics can be used as a SA to obtain pulse lasers. Therefore, InSb has important potential in fiber laser generation, further applications in optoelectronics, laser distance ranging, and optical fiber communication, and it can be widely developed.

Polarization singularities hidden in a deep subwavelength confined electromagnetic field with angular momentum.

Topologies associated with polarization point and line singularities can provide tools for controlling light propagation. By using the Stokes parameter, we demonstrate the emergence of polarization singularities hidden in deep subwavelength confined electromagnetic fields with angular momentum. We show that when the incoming orbital angular momentum is appropriately chosen, highly confined electromagnetic fields with super-diffraction-limited spatial dimensions can be obtained. At the same time, a conversion of orbital to spin angular momentum occurs, leading to a non-trivial topology. Our method provides a platform for developing topological photonics and studying the behavior of polarization singularities under strong focusing.

Linear and angular momentum properties induced by radial- and azimuthal-variant polarized beams in a strongly focused optical system.

Optical linear and angular momenta have attracted tremendous research interest in recent years. In this paper we theoretically investigate the electromagnetic fields and linear and angular momentum properties of tightly focused radial- and azimuthal-variant vector input beams. Calculations show that a uniform 3D optical cage can be achieved when the optical degree of freedom of polarization in the radial direction is introduced. Furthermore, the distributions of linear and angular momenta in the focal volume are revealed. Moreover, we numerically investigate the gradient, scattering, and total forces as well as spin and orbital torques on a Rayleigh particle generated by the optical cage. It is found that there are two equilibrium positions before and after the focal plane, both of which can achieve stable 3D particles capture. Most importantly, the longitudinal spin and orbital torques show the same patterns but in opposite directions in the two equilibrium positions, thus, the unwinding of the double helix can be expected to be achieved by virtue of this special optical torque.

Passively mode-locked fiber laser based on GeTe as a saturable absorber.

In this work, we fabricate a saturable absorber based on GeTe with saturation intensity and modulation depth of 12.6M W/c m 2 and 7%, respectively. We obtain stable conventional soliton and stretched soliton mode-locking operation. For the conventional soliton state, the average output power increased from 0.93 to 8.70 mW with the increase of pump power, and the fundamental repetition rate was 7.8351 MHz. Its central wavelength and 3 dB bandwidth were 1564.72 and 4.78 nm, respectively. For the stretched soliton state, when the pump power was increased from 87.4 to 420.3 mW, the average output power increased from 2.05 to 10.46 mW. When the maximum average output power reached 10.46 mW, the maximum average single-pulse energy was 0.86 nJ. The experimental results show that GeTe nanosheets will have broad application potential in the field of ultrafast photonics.

Generation of bright-dark soliton pairs based on a ferromagnetic insulator Cr2Si2Te6 as a modulator in an Er-doped fiber laser.

In this work, a saturable absorber (SA) based on Cr2Si2Te6 (CST), with a modulation depth of 14.90% and saturation intensity of 4.81MW/cm2, was prepared by a liquid phase stripping method. Its nonlinear optical properties and application in obtaining mode-locked pulse output of bright-dark solitons are studied. When the pump power was 1250 mW, the maximum output power was 26.60 mW; the energy of the single pulse was 15.02 nJ, and the repetition rate was 1.77 MHz. Our results provided evidence that CST can be used as an excellent SA for a mode-locked laser and demonstrated that ferromagnetic insulators can be used for the study of bright-dark soliton pairs.

Passively mode-locked Er-doped fiber laser based on a ferromagnetic insulator Cr2Si2Te6 as a saturable absorber.

In our work, a new-type, to the best of our knowledge, ferromagnetic insulator and its nonlinear optical absorption characteristics and related ultrafast modulation applications were investigated. Cr2Si2Te6 saturable absorbers (SAs) with a modulation depth and a saturable intensity of 9.7% and 3.5MW/cm2 were fabricated. By adjusting the pump power to 120 mW and optimizing the polarization state, traditional soliton operations were obtained successfully; the corresponding duration of pulse and the fundamental repetition rate were ∼1.33ps and 6.70 MHz, and the signal-to-noise ratio was 50 dB. The experimental results reveal that Cr2Si2Te6 with excellent saturable absorption characteristics can be used as a SA to obtain ultrafast pulse lasers.

Cleavage of a pathogen apoplastic protein by plant subtilases activates host immunity.

The plant apoplast is a harsh environment in which hydrolytic enzymes, especially proteases, accumulate during pathogen infection. However, the defense functions of most apoplastic proteases remain largely elusive. We show here that a newly identified small cysteine-rich secreted protein PC2 from the potato late blight pathogen Phytophthora infestans induces immunity in Solanum plants only after cleavage by plant apoplastic subtilisin-like proteases, such as tomato P69B. A minimal 61 amino acid core peptide carrying two key cysteines, conserved widely in most oomycete species, is sufficient for PC2-induced cell death. Furthermore, we showed that Kazal-like protease inhibitors, such as EPI1, produced by P. infestans prevent PC2 cleavage and dampen PC2 elicited host immunity. This study reveals that cleavage of pathogen proteins to release immunogenic peptides is an important function of plant apoplastic proteases.

Passively Q-switched and mode-locked erbium-doped fiber lasers based on tellurene nanosheets as saturable absorber.

Various two-dimensional (2D) materials show unique optical properties and excellent performance in acting as saturable absorber (SA) for demonstrating all-fiber ultra-fast lasers. Tellurene, as a new-fashioned few-layer 2D monoelemental material, was designed as an excellent saturable absorber to achieve Q-switched and mode-locked operations within erbium-doped fiber (EDF) lasers in our experiment. High-quality tellurene-based SA with a modulation depth of 0.97% was obtained by blending few-layer tellurene nanosheet solution prepared by liquid phase exfoliation method and the polyvinyl alcohol (PVA) solution. Inserting the SA into the EDF laser cavity by sandwiching the tellurene-PVA film between two fiber ferrules, either the passively Q-switched or the passively mode-locked operations can be obtained. The repetition rate varies from 15.92 to 47.61 kHz, and the pulse duration decreases from 8.915 to 5.196 µs in the passively Q-switched operation. To the best of our knowledge, this is the first demonstration focusing on the modulation application of tellurene in designing Q-switched pulsed laser operations. Additionally, mode-locked operations were also achieved by adjusting the polarization state. The obtained results fully indicate that tellurene can be developed as an efficient SA for pulsed fiber lasers.

Graphene-based ultrasensitive optical microfluidic sensor for the real-time and label-free monitoring of simulated arterial blood flow.

Highly sensitive, real-time and label-free sensing of liquid flow in microfluidic environments remains challenging. Here, by growing high-quality graphene directly on a glass substrate, we designed a microfluidic-integrated graphene-based flow sensor (GFS) capable of detecting complex, weak, and transient flow velocity and pressure signals in a microfluidic environment. This device was used to study weak and transient liquid flows, especially blood flow, which is closely related to heart and artery functions. By simulating cardiac peristalsis and arterial flow using peristaltic pumps and microfluidic systems, we monitored simulated arterial blood flow. This ultrasensitive graphene-based flow sensor accurately detected a flow velocity limit as low as 0.7 mm/s, a pumping frequency range of 0.04 Hz to 2.5 Hz, and a pressure range from 0.6 kPa to 14 kPa. By measuring the blood flow velocities and pressures, pathological blood flow signals were distinguished and captured by the corresponding flow velocities or pressures, which can reflect vascular occlusion and heart functions. This sensor may be used for the real-time and label-free monitoring of patients' basic vital signs using their blood flow and provide a possible new method for the care of critically ill patients.

Recent Progress of Fiber-Optic Sensors for the Structural Health Monitoring of Civil Infrastructure.

In recent years, with the development of materials science and architectural art, ensuring the safety of modern buildings is the top priority while they are developing toward higher, lighter, and more unique trends. Structural health monitoring (SHM) is currently an extremely effective and vital safeguard measure. Because of the fiber-optic sensor's (FOS) inherent distinctive advantages (such as small size, lightweight, immunity to electromagnetic interference (EMI) and corrosion, and embedding capability), a significant number of innovative sensing systems have been exploited in the civil engineering for SHM used in projects (including buildings, bridges, tunnels, etc.). The purpose of this review article is devoted to presenting a summary of the basic principles of various fiber-optic sensors, classification and principles of FOS, typical and functional fiber-optic sensors (FOSs), and the practical application status of the FOS technology in SHM of civil infrastructure.

Fully controlled photonic spin in highly confined optical field.

As an intrinsic attribute of light, the spin angular momentum (SAM) of photons has aroused considerable attention because of the fascinating properties emerging from light-matter interactions. We show that a diffraction-limited focal field with a steerable photonic spin structure in three dimensions can be produced under a 4π microscopic system. This is achieved by focusing two counter-propagating configurable vector beams produced in the coherent superposition of three different beams with x-polarization, y-polarization, and radial-polarization. By altering the amplitude factors of these resultant beams, the ratios between the three mutually orthogonal polarized components can be freely tuned within the focal plane, thereby allowing dynamic control over the spin orientation and ellipticity of the tightly focused optical field. The results demonstrated in this paper may find applications in spin-controlled nanophotonics.

Pancharatnam-Berry phase shaping for control of the transverse enhancement of focusing.

We show that elongating a tightly focused field in the direction perpendicular to the optical axis is possible. We demonstrate our approach by specially shaping the Pancharatnam-Berry (PB) phase. Moreover, the analytical formulae required to calculate the strength vectors and energy flux of the three-dimensional electromagnetic fields near the focus of an aplanatic optical system are derived using the Richards and Wolf vectorial diffraction methods. Calculations reveal that the transverse enhancement is controllable and depend on the phase index in the PB phase, thereby giving rise to a focus with tunable length and subwavelength width in the focal plane.