Promoting Molecular Exchange on Rare-Earth Oxycarbonate Surfaces to Catalyze the Water-Gas Shift Reaction.

It is highly desirable to fabricate an accessible catalyst surface that can efficiently activate reactants and desorb products to promote the local surface reaction equilibrium in heterogeneous catalysis. Herein, rare-earth oxycarbonates (Ln2O2CO3, where Ln = La and Sm), which have molecular-exchangeable (H2O and CO2) surface structures according to the ordered layered arrangement of Ln2O22+ and CO32- ions, are unearthed. On this basis, a series of Ln2O2CO3-supported Cu catalysts are prepared through the deposition precipitation method, which provides excellent catalytic activity and stability for the water-gas shift (WGS) reaction. Density functional theory calculations combined with systematic experimental characterizations verify that H2O spontaneously dissociates on the surface of Ln2O2CO3 to form hydroxyl by eliminating the carbonate through the release of CO2. This interchange efficiently promotes the WGS reaction equilibrium shift on the local surface and prevents the carbonate accumulation from hindering the active sites. The discovery of the unique layered structure provides a so-called "self-cleaning" active surface for the WGS reaction and opens new perspectives about the application of rare-earth oxycarbonate nanomaterials in C1 chemistry.

Facile Fabrication of CeO2-Al2O3 Hollow Sphere with Atomically Dispersed Fe via Spray Pyrolysis.

A facile spray pyrolysis method is introduced to construct the hollow CeO2-Al2O3 spheres with atomically dispersed Fe. Only nitrates and ethanol were involved during the one-step preparation process using the ultrasound spray pyrolysis approach. Detailed explorations demonstrated that differences in the pyrolysis temperature of the precursors and heat transfer are crucial to the formation of the hollow nanostructure. In addition, iron species were in situ atomically dispersed on the as-formed CeO2-Al2O3 hollow spheres via this strategy, which demonstrated promising potential in transferring syn-gas to valuable gasoline products.

Intrinsically Active Surface in a Pt/γ-Mo2N Catalyst for the Water-Gas Shift Reaction: Molybdenum Nitride or Molybdenum Oxide?

Apart from active metals, supports also contribute significantly to the catalytic performance of supported metal catalysts. On account of the formed strain and defects, the heterostructured surface of the support may play a crucial role to activate the reactant molecules, while it is usually neglected. In this work, the Pt/γ-Mo2N catalyst was prepared via a facile solution method. This Pt/γ-Mo2N catalyst showed excellent activity and stability for catalyzing the water-gas shift (WGS) reaction. The reaction rates at 240 °C were 16.5 molCO molPt-1s-1 in product-free gas and 5.36 molCO molPt-1 s-1 in full reformate gas, which were almost 20 times that of the catalysts reported. It is found that the molybdenum species in the surface of the Pt/γ-Mo2N catalyst is molybdenum oxide as MoO3. This surface MoO3 is very easily reduced even at room temperature, and it transformed into highly distorted MoOx (2 < x < 3) in the WGS reaction. The MoOx on the catalyst surface greatly enhanced the capability of generating active oxygen vacancies to dissociate H2O molecules, which induced unexpectedly superior catalytic performance. Therefore, the intrinsically active surface in the Pt/γ-Mo2N catalyst for the WGS reaction was molybdenum oxide as MoOx (2 < x < 3).

Direct Identification of Active Surface Species for the Water-Gas Shift Reaction on a Gold-Ceria Catalyst.

The crucial role of the metal-oxide interface in the catalysts of the water-gas shift (WGS) reaction has been recognized, while the precise illustration of the intrinsic reaction at the interfacial site has scarcely been presented. Here, two kinds of gold-ceria catalysts with totally distinct gold species, <2 nm clusters and 3 to 4 nm particles, were synthesized as catalysts for the WGS reaction. We found that the gold cluster catalyst exhibited a superiority in reactivity compared to gold nanoparticles. With the aid of comprehensive in situ characterization techniques, the bridged -OH groups that formed on the surface oxygen vacancies of the ceria support are directly determined to be the sole active configuration among various surface hydroxyls in the gold-ceria catalysts. The isotopic tracing results further proved that the reaction between bridged surface -OH groups and CO molecules adsorbed on interfacial Au atoms contributes dominantly to the WGS reactivity. Thus, the abundant interfacial sites in gold clusters on the ceria surface induced superior reactivity compared to that of supported gold nanoparticles in catalyzing the WGS reaction. On the basis of direct and solid experimental evidence, we have obtained a very clear image of the surface reaction for the WGS reaction catalyzed by the gold-ceria catalyst.

Construction of Active Site in a Sintered Copper-Ceria Nanorod Catalyst.

The construction of stable active site in nanocatalysts is of great importance but is a challenge in heterogeneous catalysis. Unexpectedly, coordination-unsaturated and atomically dispersed copper species were constructed and stabilized in a sintered copper-ceria catalyst through air-calcination at 800 °C. This sintered copper-ceria catalyst showed a very high activity for CO oxidation with a CO consumption rate of 6100 µmolCO·gCu-1·s-1 at 120 °C, which was at least 20 times that of other reported copper catalysts. Additionally, the excellent long-term stability was unbroken under the harsh cycled reaction conditions. Based on a comprehensive structural characterization and mechanistic study, the copper atoms with unsaturated coordination in the form of Cu1O3 were identified to be the sole active site, at which both CO and O2 molecules were activated, thus inducing remarkable CO oxidation activity with a very low copper loading (1 wt %).

Direct cleavage of C=O double bond in CO2 by the subnano MoOx surface on Mo2N.

Compared to H2-assisted activation mode, the direct dissociation of CO2 into carbonyl (*CO) with a simplified reaction route is advantageous for CO2-related synthetic processes and catalyst upgrading, while the stable C = O double bond makes it very challenging. Herein, we construct a subnano MoO3 layer on the surface of Mo2N, which provides a dynamically changing surface of MoO3↔MoOx (x < 3) for catalyzing CO2 hydrogenation. Rich oxygen vacancies on the subnano MoOx surface with a high electron donating capacity served as a scissor to directly shear the C = O double bond of CO2 to form CO at a high rate. The O atoms leached in CO2 dissociation are removed timely by H2 to regenerate active oxygen vacancies. Owing to the greatly enhanced dissociative activation of CO2, this MoOx/Mo2N catalyst without any supported active metals shows excellent performance for catalyzing CO2 hydrogenation to CO. The construction of highly disordered defective surface on heterostructures paves a new pathway for molecule activation.

Hydroxylated TiO2-induced high-density Ni clusters for breaking the activity-selectivity trade-off of CO2 hydrogenation.

The reverse water gas shift reaction can be considered as a promising route to mitigate global warming by converting CO2 into syngas in a large scale, while it is still challenging for non-Cu-based catalysts to break the trade-off between activity and selectivity. Here, the relatively high loading of Ni species is highly dispersed on hydroxylated TiO2 through the strong Ni and -OH interactions, thereby inducing the formation of rich and stable Ni clusters (~1 nm) on anatase TiO2 during the reverse water gas shift reaction. This Ni cluster/TiO2 catalyst shows a simultaneous high CO2 conversion and high CO selectivity. Comprehensive characterizations and theoretical calculations demonstrate Ni cluster/TiO2 interfacial sites with strong CO2 activation capacity and weak CO adsorption are responsible for its unique catalytic performances. This work disentangles the activity-selectivity trade-off of the reverse water gas shift reaction, and emphasizes the importance of metal-OH interactions on surface.

Boosting reactivity of water-gas shift reaction by synergistic function over CeO2-x/CoO1-x/Co dual interfacial structures.

Dual-interfacial structure within catalysts is capable of mitigating the detrimentally completive adsorption during the catalysis process, but its construction strategy and mechanism understanding remain vastly lacking. Here, a highly active dual-interfaces of CeO2-x/CoO1-x/Co is constructed using the pronounced interfacial interaction from surrounding small CeO2-x islets, which shows high activity in catalyzing the water-gas shift reaction. Kinetic evidence and in-situ characterization results revealed that CeO2-x modulates the oxidized state of Co species and consequently generates the dual active CeO2-x/CoO1-x/Co interface during the WGS reaction. A synergistic redox mechanism comprised of independent contribution from dual functional interfaces, including CeO2-x/CoO1-x and CoO1-x/Co, is authenticated by experimental and theoretical results, where the CeO2-x/CoO1-x interface alleviates the CO poison effect, and the CoO1-x/Co interface promotes the H2 formation. The results may provide guidance for fabricating dual-interfacial structures within catalysts and shed light on the mechanism over multi-component catalyst systems.

An air-stable, reusable Ni@Ni(OH)2 nanocatalyst for CO2/bicarbonate hydrogenation to formate.

Production of formate via CO2/bicarbonate hydrogenation using cheap metal-based heterogeneous catalysts is attractive. Herein, we report the organometallic synthesis of a foam-like Ni@Ni(OH)2 composite nanomaterial which exhibited remarkable air stability and over 2 times higher catalytic activity than commercial RANEY® Ni catalyst in formate synthesis. Formate generation was achieved with an optimal rate of 6.0 mmol gcat-1 h-1 at 100 °C, a significantly lower operation temperature compared to the 200-260 °C reported in the literature. Deep characterization evidenced that this nanomaterial was made of an amorphous Ni(OH)2 phase covering metallic Ni sites; a core-shell structure which is crucial for the stability of the catalyst. The adsorption of bicarbonates onto the Ni@Ni(OH)2 catalyst was found to be a kinetically relevant step in the reaction, and the Ni-Ni(OH)2 interface was found to be beneficial for both CO2 and H2 activation thanks to a cooperative effect. Our findings emphasize the underestimated potential of Ni-based catalysts in CO2 hydrogenation to formate, indicating a viable strategy to develop stable, cheap metal catalysts for greener catalytic applications.

Pt-Embedded CuO x-CeO2 Multicore-Shell Composites: Interfacial Redox Reaction-Directed Synthesis and Composition-Dependent Performance for CO Oxidation.

Exploring the state-of-the-art heterogeneous catalysts has been a general concern for sustainable and clean energy. Here, Pt-embedded CuO x-CeO2 multicore-shell (Pt/CuO x-CeO2 MS) composites are fabricated at room temperature via a one-pot and template-free procedure for catalyzing CO oxidation, a classical probe reaction, showing a volcano-shaped relationship between the composition and catalytic activity. We experimentally unravel that the Pt/CuO x-CeO2 MS composites are derived from an interfacial autoredox process, where Pt nanoparticles (NPs) are in situ encapsulated by self-assembled ceria nanospheres with CuO x clusters adhered through deposition/precipitation-calcination process. Only Cu-O and Pt-Pt coordination structures are determined for CuO x clusters and Pt NPs in Pt/CuO x-CeO2 MS, respectively. Importantly, the close vicinity between Pt and CeO2 benefits to more oxygen vacancies in CeO2 counterparts and results in thin oxide layers on Pt NPs. Meanwhile, the introduction of CuO x clusters is crucial for triggering synergistic catalysis, which leads to high resistance to aggregation of Pt NPs and improvement of catalytic performance. In CO oxidation reaction, both Ptδ+-CO and Cu+-CO can act as active sites during CO adsorption and activation. Nonetheless, redundant content of Pt or Cu will induce a strongly bound Pt-O-Ce or Cu-[O x]-Ce structures in air-calcinated Pt/CuO x-CeO2 MS composites, respectively, which are both deleterious to catalytic reactivity. As a result, the composition-dependent catalytic activity and superior durability of Pt/CuO x-CeO2 MS composites toward CO oxidation reaction are achieved. This work should be instructive for fabricating desirable multicomponent catalysts composed of noble metal and bimetallic oxide composites for diverse heterogeneous catalysis.

Contributions of distinct gold species to catalytic reactivity for carbon monoxide oxidation.

Small-size (<5 nm) gold nanostructures supported on reducible metal oxides have been widely investigated because of the unique catalytic properties they exhibit in diverse redox reactions. However, arguments about the nature of the gold active site have continued for two decades, due to the lack of comparable catalyst systems with specific gold species, as well as the scarcity of direct experimental evidence for the reaction mechanism under realistic working conditions. Here we report the determination of the contribution of single atoms, clusters and particles to the oxidation of carbon monoxide at room temperature, by the aid of in situ X-ray absorption fine structure analysis and in situ diffuse reflectance infrared Fourier transform spectroscopy. We find that the metallic gold component in clusters or particles plays a much more critical role as the active site than the cationic single-atom gold species for the room-temperature carbon monoxide oxidation reaction.