ABSTRACT
OBJECTIVE: To determine the accuracy of salivary active matrix metalloproteinase (aMMP)-8 point-of-care test (POCT) for detecting periodontitis in adults, through meta-analysis. MATERIALS AND METHODS: Diagnostic studies evaluating the accuracy of salivary/oral rinse aMMP-8 POCT for detecting periodontitis in adults, when compared with clinical examination, were considered eligible. A comprehensive search was performed up to 31 August 2023 through five databases. Quality Assessment of Diagnostic Accuracy Studies 2 was utilized to evaluate the methodological quality of the included articles. Meta-analysis was performed using Bayesian bivariate hierarchical model and subgroup analysis. RESULTS: From 368 screened studies, 6 studies (4 cross-sectional and 2 longitudinal studies) were included in the meta-analysis. Overall, the pooled sensitivity and specificity of salivary aMMP-8-POCT for detecting periodontitis were 0.63 (95% CI: 0.41-0.82) and 0.84 (95% CI: 0.65-0.95), respectively. Subgroup analyses revealed that the 95% CI for oral fluid types, predefined diagnostic thresholds and the POCT systems largely overlapped, indicating that the differences between them may not be significant. CONCLUSION: Salivary aMMP-8 POCT shows fair accuracy for detecting periodontitis. The diagnostic accuracy cannot be significantly influenced by the types of oral fluids, predefined diagnostic thresholds or the specific POCT systems used. More research is needed to confirm the clinical utility and implementation of aMMP-8 POCT in the diagnosis of periodontitis.
Subject(s)
Matrix Metalloproteinase 8 , Periodontitis , Saliva , Adult , Humans , Matrix Metalloproteinase 8/analysis , Periodontitis/diagnosis , Point-of-Care Testing , Saliva/enzymology , Saliva/chemistry , Sensitivity and SpecificityABSTRACT
OBJECTIVE: This study explored factors affecting speech improvement in patients with an edentulous maxilla after the delivery of a complete-arch implant-supported fixed dental prosthesis (IFDP). MATERIALS AND METHODS: Patients who had received IFDP for edentulous maxilla were enrolled, and various potential speech improvement-related factors were considered, including patient demographics, anterior residual bone volume, preoperative facial features, preoperative acoustic parameters, and adaptation time. Acoustic analysis and perceptual ratings were used to assess three fricatives [s], [f], and [É]. Correlation and regression analyses were conducted to assess the association between changes in fricatives and potential factors (α = .05). RESULTS: The study included 50 patients (18 females and 32 males, aged 50.62 ± 15.71 years, range 19-76). Significant correlations were found among the change in the center of gravity (ΔCoG) of [s] and anterior residual bone volume, zygomatic implants number and proportion (p < .05). These correlations were largely mirrored in the perceptual score (ΔPS) changes. After controlling for age, sex, preoperative acoustic parameters, and adaptation time, the ΔCoG and ΔPS of fricatives were mainly correlated with the anterior residual bone volume, preoperative acoustic parameters, and adaptation time. CONCLUSION: Speech improvements post-IFDP delivery are mainly related to preoperative speech characteristics, anterior residual bone volume, and adaptation time. The residual bone volume's impact on consonants varies with specific articulatory gestures. This study provides insights into forecasting speech outcomes following IFDP restoration and provides recommendations and methods for data collection in developing future prediction models.
ABSTRACT
STATEMENT OF PROBLEM: An accurate digital workflow for transferring the interocclusal relationship from complete arch diagnostic interim restorations to complete arch tooth preparations is essential in complete mouth rehabilitation. However, research on the accuracy of digital cross-mounting methods is lacking. PURPOSE: The purpose of this in vitro study was to compare the trueness of 4 sectional-cast digital cross-mounting methods in transferring the interocclusal relationship for complete mouth rehabilitation. MATERIAL AND METHODS: Maxillary and mandibular anatomic typodonts were used to build complete arch tooth preparations and diagnostic interim restorations for complete mouth rehabilitation in vitro. Four sectional casts were designed: an anterior cast (AR), a posterior cast (PO), a unilateral cast (UL), and a tripod cast (TR). Both extraoral scanning (EOS) and intraoral scanning (IOS) were used to obtain intermediate digital sectional casts, which were cross-registered with diagnostic interim restorations and definitive casts to transfer the interocclusal relationship. Trueness was determined by assessing tooth distance deviation and mandibular 3-dimensional (3D) deviation. Differences among the 4 sectional-cast methods were analyzed with the Kruskal-Wallis test, and differences between the 2 scanning methods were analyzed with the Mann-Whitney U test (α=.05). RESULTS: Significant differences in the trueness of interocclusal relationship transfer were observed among the 4 sectional-cast methods (P<.05). Regarding tooth overall distance deviation, TR-EOS found no statistically significant difference compared with PO-EOS (P>.05), but TR-EOS had half the overall distance deviation of PO-EOS. Both TR-EOS and PO-EOS had smaller deviations than the AR-EOS and UL-EOS groups (P<.05). TR-IOS had a smaller distance deviation than the AR-IOS, PO-IOS, and UL-IOS groups (P<.05). The overall distance deviation of EOS was significantly smaller than that of IOS in the TR and PO groups (P<.05). Regarding mandibular 3D deviation, TR-EOS found no statistically significant difference but had half the root mean square (RMS) of 3D deviation compared with the PO-EOS groups (P>.05). Both TR-EOS and PO-EOS groups had a smaller RMS than the AR-EOS and groups (P<.05). The TR-IOS group had a smaller RMS than the AR-IOS, PO-IOS, and UL-IOS groups (P<.05). The 3D deviation of EOS was significantly smaller than that of IOS in the PO group (P<.05). CONCLUSIONS: Both EOS and IOS with the tripod sectional-cast digital method accurately transferred the interocclusal relationship for complete mouth rehabilitation.
ABSTRACT
For full-mouth rehabilitation of worn dentition, "diagnostic" interim restorations are required to reestablish the interocclusal relationship. It is important but challenging to transfer the interocclusal relationship and to map the basic form and contour of interim restorations to the final restorations. Alignment of interim restorations and working casts is difficult when using digital workflows because of a lack of consistent hard tissue reference points. The digital workflow presented in this study used a "3-point sectional-cast digital cross-mounting method" to transfer the interocclusal relationship during full-mouth rehabilitation. An intermediate cast was made with three interim restorations: one on an incisor and two on molars. The interocclusal relationship and occlusal morphologies of the diagnostic interim prostheses were transferred and aligned to working casts using the 3-point sectional casts.
Subject(s)
Dentition , Mouth Rehabilitation , Humans , Dental Care , Incisor , MolarABSTRACT
The root Rhynchosia volubilis was widely used for contraception in folk medicine, although its molecular mechanism on antifertility has not yet been revealed. In human sperm, it was reported that the cation channel of sperm, an indispensable cation channel for the fertilization process, could be regulated by various steroid-like compounds in plants. Interestingly, these nonphysiological ligands would also disturb the activation of the cation channel of sperm induced by progesterone. Therefore, this study aimed to explore whether the compounds in R. volubilis affect the physiological regulation of the cation channel of sperm. The bioguided isolation of the whole herb of R. volubilis has resulted in the novel discovery of five new prenylated isoflavonoids, rhynchones Aâ-âE (1: â-â5: ), a new natural product, 5'-O-methylphaseolinisoflavan (6: ) (1H and 13C NMR data, Supporting Information), together with twelve known compounds (7: â-â18: ). Their structures were established by extensive spectroscopic analyses and drawing a comparison with literature data, while their absolute configurations were determined by electronic circular dichroism calculations. The experiments of intracellular Ca2+ signals and patch clamping recordings showed that rhynchone A (1: ) significantly reduced cation channel of sperm activation by competing with progesterone. In conclusion, our findings indicat that rhynchone A might act as a contraceptive compound by impairing the activation of the cation channel of sperm and thus prevent fertilization.
Subject(s)
Progesterone , Sperm Motility , Calcium/metabolism , Calcium Channels/metabolism , Calcium Signaling , Humans , Male , Progesterone/analysis , Progesterone/metabolism , Progesterone/pharmacology , Seeds , Spermatozoa/chemistry , Spermatozoa/metabolismABSTRACT
STATEMENT OF PROBLEM: The accuracy of digital scanning for complete dental arch and implant-supported complete-arch restorations has been reported. However, research addressing the accuracy of digital scanning methods for complete-arch tooth preparation is lacking. PURPOSE: The purpose of this in vitro study was to compare the accuracy of intraoral scanning, impression scanning, and cast scanning for complete-arch preparation. MATERIAL AND METHODS: Maxillary and mandibular jaw typodonts with 28 teeth prepared for complete crowns were used as reference casts and digitized as reference data sets with a desktop scanner. Three digital scanning methods were applied. First, the reference casts were each scanned 10 times with an intraoral scanner to generate the intraoral scanning group data sets. Second, the reference casts were each captured 10 times by using polyvinyl siloxane impression material, and the impressions were scanned with a desktop scanner to generate the impression scanning group data sets. Third, the impressions obtained in the impression scanning group were used to make gypsum casts which were then digitized with a desktop scanner to generate the cast scanning group data sets. Accuracy was determined by trueness and precision. Three-dimensional deviations of the prepared arches and anterior and posterior segments were measured from root mean square values and depicted on color-difference maps. Differences among test groups were analyzed by using a 1-way ANOVA and the post hoc Bonferroni test for normally distributed data or the Kruskal-Wallis test with Bonferroni correction for non-normally distributed data (α=.05). RESULTS: The trueness of the maxillary arch was significantly higher in the impression scanning group than in the cast scanning and intraoral scanning groups (P<.05), but no significant differences were found among the 3 groups of the mandibular arch (P>.05). The precision of both arches was significantly higher in the impression scanning and intraoral scanning groups than in the cast scanning group (P<.05). Color maps showed horizontal symmetrical displacement in the intraoral scanning group relative to the reference data sets and within-group unilateral distal-end distortion. Irregular arch deformations were noted in the impression scanning group, and buccal and occlusal expansion occurred in the anterior-posterior direction in the cast scanning group. Pooled data for anterior teeth indicated that the trueness was lowest in the intraoral scanning group; however, that for the maxillary anterior teeth did not differ, while that for the mandibular anterior teeth differed significantly among groups (P<.05). For the posterior teeth, deviation was the lowest in the impression scanning group, and significant differences were noted in both arches among the 3 groups (P<.05). CONCLUSIONS: Of the methods tested, impression scanning was the most accurate for the creation of a digital cast of a complete prepared arch.
Subject(s)
Dental Impression Technique , Models, Dental , Dental Arch/diagnostic imaging , Computer-Aided Design , Imaging, Three-Dimensional/methods , Tooth PreparationABSTRACT
PURPOSE: To compare the dimensional accuracy of 3D-printed mandibular complete dentures with different build orientations. MATERIAL AND METHODS: A mandibular complete denture was digitized as a virtual reference file. The reference file was 3D-printed at the 0°, 45°, and 90° build orientations with a MultiJet 3D printer (Projet MJP 3600 Dental, 3D systems, Rock Hill, SC). A total of 27 complete dentures were 3D-printed with 9 samples for each orientation. All printed dentures were digitized and separated into teeth, denture extension and intaglio test surfaces. The dimensional accuracy (in root mean square, RMS) was evaluated by comparing whole denture and 3 test surfaces with the reference file. One-way analysis of variance (ANOVA) and a Post-Hoc all pairs Bonferroni test were used to determine statistical differences (α = 0.05). RESULTS: For the dimensional accuracy on whole denture, the 45° build orientation group showed the smallest RMS (0.170 ± 0.043 mm) than those of the 0° build orientation group (0.185 ± 0.060 mm, p < 0.001) and 90° build orientation group (0.183 ± 0.044 mm, p < 0.001). For the dimensional accuracy on the teeth, denture extension and intaglio test surfaces, the 45° build orientation group also show the smallest RMS values (0.140 ± 0.044 mm at teeth surface, 0.176 ± 0.058 mm at denture extension and 0.207 ± 0.006 mm at intaglio surface). The 0°and 90° build orientation groups had similar accuracy at the teeth (0.149 ± 0.056 mm versus 0.154 ± 0.056 mm, p = 0.164) and denture extension surfaces (0.200 ±0.025 mm vs 0.196 ± 0.013 mm, p = 1.000). However, 0° build orientation group (0.228 ± 0.010 mm) has significantly higher RMS values then those of 90° build orientation group (0.218 ± 0.057 mm) in the intaglio surface (p = 0.032). The teeth surfaces were most accurate in each build orientation groups, while the intaglio surfaces were least accurate. CONCLUSIONS: The build orientation affected the dimensional accuracy of 3D-printed mandibular complete dentures, and the 45° build orientation resulted in the most accurate 3D-printed denture from a MultiJet 3D printer.
Subject(s)
Computer-Aided Design , Printing, Three-Dimensional , Denture, Complete , MandibleABSTRACT
The provisional prosthesis is a prerequisite for prosthodontic rehabilitation. The purpose of this technique was to register facial and intraoral scans predictably. A 3D virtual patient was created through facial scans, intraoral scans, digital face-bow transfer, and digital cross-articulation technique. This virtual patient allowed predictable positioning of intraoral scans to a virtual articulator by using digital face-bow transfer. The resulting virtual patient facilitated the design of definitive prostheses following a facially generated treatment planning principle. In addition, the virtual articulator was used to improve occlusal design on the definitive prostheses and reduce the need for intraoral adjustment.
Subject(s)
Dental Articulators , Face , Computer-Aided Design , Esthetics , Face/diagnostic imaging , Humans , Patient Care Planning , ProsthodonticsABSTRACT
This article presents an impression technique involving transfer of the position of implants and the emergence profile of splinted interim prostheses fabricated on nonindexed interim abutments to definitive single crowns fabricated on indexed abutments.
Subject(s)
Dental Abutments , Dental Prosthesis, Implant-Supported , Crowns , Esthetics , Esthetics, Dental , HumansABSTRACT
ETHNOPHARMACOLOGICAL RELEVANCE: Hanchuan Zupa Granule (HCZP) is a classic prescription of Uyghur medicine, that is used for cough and abnormal mucinous asthma caused by a cold and "Nai-Zi-Lai". AIM OF THE STUDY: This study aimed to explore the possible molecular mechanism of HCZP in the treatment of asthma, using a network pharmacology method and in vivo experiments. MATERIALS AND METHODS: First, we conducted qualitative analysis of the chemical composition of HCZP as a basis for network pharmacology analysis. Using network pharmacology tools, the possible signaling pathways of HCZP in the treatment of asthma were obtained. An OVA-sensitized asthma model was established, and HCZP was continuously administered for one week. BALF was collected for cell counting, and serum and lung tissues were collected to analyze the expression of IgE, IL-4, IL-5, IL-13 and IFN-γ. Hematoxylin & eosin (H&E) staining was performed to assess the pathological changes in the lung tissues. Related protein expression in the lung tissues was analyzed by Western blotting for molecular mechanism exploration. RESULTS: Fifty-six chemical compounds were identified by UPLC Q-TOF MS. According to the network pharmacology results, 18 active compounds were identified among the 56 compounds, and 68 target genes of HCZP in the treatment of asthma were obtained. A total of 19 pathways were responsible for asthma (P < 0.05) according to KEGG pathway analysis. In vivo results showed that OVA sensitivity induced increased respiratory system resistance and inflammatory responses, which included inflammatory cell infiltration and high levels of IgE, IL-4, IL-5 and IL-13 in serum and lung tissues. Furthermore, OVA upregulated p-PI3K, p-JNK and p-p38 expression in lung tissues. Moreover, HCZP treatment significantly downregulated respiratory system resistance, and the expression of IL-4, IL-5, IL-13 and IgE, as well as significantly improved inflammatory cell infiltration in lung tissues. Moreover, the protein expression of p-PI3K, p-JNK and p-p38 in lung tissues decreased after HCZP treatment. CONCLUSION: HCZP significantly inhibited the OVA-induced inflammatory response via the PI3K-Akt and Fc epsilon RI signaling pathways.