Proteomic analysis of calcium-enriched sol-gel biomaterials.

Calcium is an element widely used in the development of biomaterials for bone tissue engineering as it plays important roles in bone metabolism and blood coagulation. The Ca ions can condition the microenvironment at the tissue-material interface, affecting the protein deposition process and cell responses. The aim of this study was to analyze the changes in the patterns of protein adsorption on the silica hybrid biomaterials supplemented with different amounts of CaCl2, which can function as release vehicles. This characterization was carried out by incubating the Ca-biomaterials with human serum. LC-MS/MS analysis was used to characterize the adsorbed protein layers and compile a list of proteins whose affinity for the surfaces might depend on the CaCl2 content. The attachment of pro- and anti-clotting proteins, such as THRB, ANT3, and PROC, increased significantly on the Ca-materials. Similarly, VTNC and APOE, proteins directly involved on osteogenic processes, attached preferentially to these surfaces. To assess correlations with the proteomic data, these formulations were tested in vitro regarding their osteogenic and inflammatory potential, employing MC3T3-E1 and RAW 264.7 cell lines, respectively. The results confirmed a Ca dose-dependent osteogenic and inflammatory behavior of the materials employed, in accordance with the protein attachment patterns.

Osseointegration mechanisms: a proteomic approach.

The prime objectives in the development of biomaterials for dental applications are to improve the quality of osseointegration and to short the time needed to achieve it. Design of implants nowadays involves changes in the surface characteristics to obtain a good cellular response. Incorporating osteoinductive elements is one way to achieve the best regeneration possible post-implantation. This study examined the osteointegrative potential of two distinct biomaterials: sandblasted acid-etched titanium and a silica sol-gel hybrid coating, 70% MTMOS-30% TEOS. In vitro, in vivo, and proteomic characterisations of the two materials were conducted. Enhanced expression levels of ALP and IL-6 in the MC3T3-E1 cells cultured with coated discs, suggest that growing cells on such surfaces may increase mineralisation levels. 70M30T-coated implants showed improved bone growth in vivo compared to uncoated titanium. Complete osseointegration was achieved on both. However, coated implants displayed osteoinductive properties, while uncoated implants demonstrated osteoconductive characteristics. Coagulation-related proteins attached predominantly to SAE-Ti surface. Surface properties of the material might drive the regenerative process of the affected tissue. Analysis of the proteins on the coated dental implant showed that few proteins specifically attached to its surface, possibly indicating that its osteoinductive properties depend on the silicon delivery from the implant.

Correlation between biological responses in vitro and in vivo to Ca-doped sol-gel coatings assessed using proteomic analysis.

Poor correlation between the results of in vitro testing and the subsequent in vivo experiments hinders the design of biomaterials. Thus, new characterisation methods are needed. This study used proteomic and histological techniques to analyse the effects of Ca-doped biomaterials in vitro and in vivo and verify the correlation between the two systems. The sol-gel route was employed to synthesise coatings functionalised with 0.5 and 5 wt% of CaCl2. Morphology of the coatings was examined using SEM; the Ca2+ ion release from the materials was analysed by means of ICP-AES spectroscopy. The osteogenic and inflammatory responses were inspected in vitro in human osteoblasts (HOb) and TPH-1 monocytes. The in vivo experiments used a rabbit model. The nLC-MS/MS-based proteomic methods were utilised to analyse the proteins adhering to the material samples incubated with human serum or examine protein expression in the tissues close to the implants. Ca-doped biomaterials caused a remarkable increase in the adsorption of coagulation-related proteins, both in vitro (PLMN, THRB, FIBA and VTNC) and in vivo (FBLN1, G1U978). Enhanced affinity to these materials was also observed for proteins involved in inflammation (CO5, C4BPA, IGHM and KV302 in vitro; CARD6, DDOST and CD14 in vivo) and osteogenic functions (TETN, PEDF in vitro; FBN1, AHSG, MYOC in vivo). The results obtained using different techniques were well matched, with a good correlation between the in vitro and in vivo experiments. Thus, the proteomic analysis of biological responses to biomaterials in vitro is a useful tool for predicting their impact in vivo.

Bioactive zinc-doped sol-gel coating modulates protein adsorption patterns and in vitro cell responses.

Zinc is an essential element with an important role in stimulating the osteogenesis and mineralization and suppressing osteoclast differentiation. In this study, new bioactive ZnCl2-doped sol-gel materials were designed to be applied as coatings onto titanium. The biomaterials were physicochemically characterized and the cellular responses evaluated in vitro using MC3T3-E1 osteoblasts and RAW264.7 macrophages. The effect of Zn on the adsorption of human serum proteins onto the material surface was evaluated through nLC-MS/MS. The incorporation of Zn did not affect the crosslinking of the sol-gel network. A controlled Zn2+ release was obtained, reaching values below 10 ppm after 21 days. The materials were no cytotoxic and lead to increased gene expression of ALP, TGF-ß, and RUNX2 in the osteoblasts. In macrophages, an increase of IL-1ß, TGF-ß, and IL-4 gene expression was accompanied by a reduced TNF-α liberation. Proteomic results showed changes in the adsorption patterns of proteins associated with immunological, coagulative, and regenerative functions, in a Zn dose-dependent manner. The variations in protein adsorption might lead to the downregulation of the NF-κB pathway, thus explain the observed biological effects of Zn incorporation into biomaterials. Overall, these coatings demonstrated their potential to promote bone tissue regeneration.

The effect of strontium incorporation into sol-gel biomaterials on their protein adsorption and cell interactions.

It is known strontium can both inhibit the osteoclast formation and stimulate the osteoblast maturation, so biomaterials containing this element can favour bone structure stabilisation. The addition of Sr to biomaterials could affect their interactions with proteins and cells. Here, a silica-hybrid sol-gel network doped with different amounts of SrCl2 and applied as coatings on titanium discs was examined. in vitro analysis was performed to determine the potential effect of Sr in the coatings, showing enhanced gene expression of osteogenic markers (alkaline phosphatase and transforming growth factor-ß) in MC3T3-E1 incubated with Sr-doped biomaterials. The examination of inflammatory markers (tumour necrosis factor-α and interleukin 10) in RAW 264.7 macrophages revealed an anti-inflammatory potential of these materials. Proteins adsorbed onto the coatings incubated with human serum (3 h at 37 °C) were also analysed; mass spectrometry was used to characterise the proteins adhering to materials with different Sr content. Adding Sr to the coatings increased their affinity to APOE and VTNC proteins (associated with anti-inflammatory and osteogenic functions). Moreover, the proteins involved in coagulation processes, such as prothrombin, were more abundant on the coatings containing Sr than on the base sol-gel surfaces. Correlations between gene expression and proteomic results were also examined.

Preparation and characterization of injectable PMMA-strontium-substituted bioactive glass bone cement composites.

In most minimally-invasive procedures used to address severe pain arising from compression fractures of the vertebral bodies, such as percutaneous vertebroplasty (PVP), a poly(methyl methacrylate) (PMMA) bone cement is used. Shortcomings of this type of cement, such as high exotherm temperature and lack of bioactivity, are well known. We prepared different formulations of a composite bone cement, whose solid constituents consisted of PMMA beads and particles of a bioactive glass (BG), where 0-20%(w/w) of the calcium component was substituted by strontium. The difference between the formulations was in the relative amounts of the solid phase constituents and in the Sr-content of BG. We determined the influence of the mixture of solid phase constituents of the cement formulation on a collection of properties, such as maximum exotherm temperature (Tmax ), setting time (tset ), and injectability (I). The selection of the PMMA beads was crucial to obtain cement composite formulations capable to be efficiently injected. Results allowed to select nine solid phase mixtures to be further tested. Then, we determined the influence of the composition of these composite bone cements on Tmax , tset , I, and cell proliferation. The results showed that the performance of various of the selected composite cements was better than that of PMMA cement reference, with lower Tmax , lower tset , and higher I. We found that incorporation of Sr-substituted BGs into these materials bestows bioactivity properties associated with the role of Sr in bone formation, leading to some composite cement formulations that may be suitable for use in PVP. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1245-1257, 2018.

Bioactive potential of silica coatings and its effect on the adhesion of proteins to titanium implants.

There is an ever-increasing need to develop dental implants with ideal characteristics to achieve specific and desired biological response in the scope of improve the healing process post-implantation. Following that premise, enhancing and optimizing titanium implants through superficial treatments, like silica sol-gel hybrid coatings, are regarded as a route of future research in this area. These coatings change the physicochemical properties of the implant, ultimately affecting its biological characteristics. Sandblasted acid-etched titanium (SAE-Ti) and a silica hybrid sol-gel coating (35M35G30T) applied onto the Ti substrate were examined. The results of in vitro and in vivo tests and the analysis of the protein layer adsorbed to each surface were compared and discussed. In vitro analysis with MC3T3-E1 osteoblastic cells, showed that the sol-gel coating raised the osteogenic activity potential of the implants (the expression of osteogenic markers, the alkaline phosphatase (ALP) and IL-6 mRNAs, increased). In the in vivo experiments using as model rabbit tibiae, both types of surfaces promoted osseointegration. However, the coated implants demonstrated a clear increase in the inflammatory activity in comparison with SAE-Ti. Mass spectrometry (LC-MS/MS) analysis showed differences in the composition of protein layers formed on the two tested surfaces. Large quantities of apolipoproteins were found attached predominantly to SAE-Ti. The 35M35G30T coating adsorbed a significant quantity of complement proteins, which might be related to the material intrinsic bioactivity, following an associated, natural and controlled immune response. The correlation between the proteomic data and the in vitro and in vivo outcomes is discussed on this experimental work.