ABSTRACT
Cultural heritage's structural changes and damages can influence the mechanical behaviour of artefacts and buildings. The use of finite element methods (FEM) for mechanical analysis is largely used in modelling stress behaviour. The workflow involves the use of CAD 3D models and the use of non-uniform rational B-spline (NURBS) surfaces. For cultural heritage objects, altered by the time elapsed since their creation, the representation created with the CAD model may introduce an extreme level of approximation, leading to wrong simulation results. The focus of this work is to present an alternative method intending to generate the most accurate 3D representation of a real artefact from highly accurate 3D reality-based models, simplifying the original models to make them suitable for finite element analysis (FEA) software. The approach proposed, and tested on three different case studies, was based on the intelligent use of retopology procedures to create a simplified model to be converted to a mathematical one made by NURBS surfaces, which is also suitable for being processed by volumetric meshes typically embedded in standard FEM packages. This allowed us to obtain FEA results that were closer to the actual mechanical behaviour of the analysed heritage asset.
ABSTRACT
A hybrid post-treatment combining tumble finishing as a final step after shot peening and heat treatment was developed to alleviate the adverse effects of internal and surface defects on the fatigue performance of laser powder bed fusion AlSi10Mg samples. The effects of each post-treatment were investigated individually and synergistically on microstructure, surface morphology and roughness, hardness, residual stresses, porosity, and rotating bending fatigue behavior of V-notched AlSi10Mg samples. The results reveal that tumble finishing can highly reduce surface roughness by 28 and 32% compared to the as-built and heat-treated states while inducing extra surface layer hardening and compressive residual stresses. The hybrid post-treatment of heat treatment + shot peening + tumble finishing significantly increased the fatigue life of the samples by over 500 times higher compared to the as-built series.
ABSTRACT
Impact surface treatments are well-known for their efficiency in enhancing the mechanical properties of metallic materials, especially under cyclic loadings. These processes, which encompass a wide range of surface treatments based on repetitive impacts of tools of various types, induce surface plastic deformation, compressive residual stresses, and grain refinement alter the surface roughness as a side effect. Thus, it is essential to have suitable indexes to quantify the surface features caused by the typically random nature of these treatments. Herein, we evaluated the rationality of using standard roughness parameters for describing the morphological characteristics of surfaces treated by shot peening as a representative and widely used treatment of the category. A detailed numerical model of the peening process was developed. The output data were elaborated to extract the surface roughness parameters following the standard procedures. The results revealed the validity of the surface roughness parameters to describe the topography of material treated with adequate surface coverage, also highlighting the necessity to use a set of parameters rather than the common practice of relying on single parameters. Not considering a comprehensive set of amplitude and spacing parameters can result in significant, inconsistent, and misleading results while comparing the performance of surfaces.
ABSTRACT
Shot peening is widely used for improving mechanical properties especially fatigue behavior of metallic components by inducing surface hardening, compressive residual stresses and surface grain refinement. In air blast shot peening, projection pressure and surface coverage (an index of peening duration) have been considered as major controlling process parameters; the combination of these parameters plays a critical role in the beneficial effects of shot peening. Generally in severe shot peening aimed at obtaining surface grain refinement, constant values of pressure are considered with different peening durations. Considering very high peening duration, however, the phenomenon of over shot peening, which can be identified with the formation of surface defects could occur. The present study introduces a novel shot peening treatment, here called gradient severe shot peening (GSSP) that instead of using constant projection pressure, implements gradually increasing or decreasing pressures. The gradual increase of the projection pressure acts as a pre-hardening stage for the following higher projection pressure boosting the potential of the material to tolerate the sequential impacts and thus become less prone to the formation of surface defects. The results of the experiments indicate significant fatigue life improvement obtained for GSSP treated specimens compared to the standard treatment with constant pressure. GSSP avoids the detrimental effects of over-peening, while maintaining the beneficial effects of surface nano-crystallization, surface hardening and compressive residual stresses. The notable difference in fatigue strength enhancement for GSSP treated material can be also attributed to the modulated surface morphology with lower surface roughness compared to a standard shot peening treatment with the same exposure time.
ABSTRACT
Impact based surface treatments with adequate kinetic energy have favorable effects on promoting cell-substrate interactions, reducing bacterial adhesion, and enhancing fatigue performance of metallic biomaterials. Here, we used both numerical and experimental approaches to evaluate the potential of these treatments for addressing the major issue associated with the application of pure iron in biomedical implants, i.e. its low corrosion rate. Despite the efficiency of impact based surface treatments in modulating the degradation rate of pure iron, the maximum reported depth of the affected surface layer is still limited, even when extreme process parameters are used. To address this issue, herein, two impact based treatments were adjusted to trigger the dislocation activities that facilitate grain refinement in pure iron using multi-directional inclined impacts. An alternative approach of severe shot peening (SSP) was developed and compared with ultrasonic shot peening (USP). The effect of both treatments and variations of their key parameters were analyzed considering the significant role of shear bands and dislocation cells in the grain refinement mechanism of pure α-iron. Microstructural, mechanical and electrochemical properties of the treated material were analyzed. The observations showed extension of the grain refined layers for the specimens subjected to multidirectional oblique impacts compared to the ones treated in the classic manner using normal impacts. The results imply that by adapting peening parameters, it would be possible to effectively create a thick surface layer with properties that can accelerate the biodegradation of pure iron boosting its potential to meet clinical requirements for temporary hard tissue implants.
Subject(s)
Biocompatible Materials , Iron , Corrosion , Prostheses and Implants , Surface PropertiesABSTRACT
Pure iron and its biocompatible and biodegradable alloys have a high potential to be used for temporary load bearing medical implants. Nevertheless, the formation of passive iron oxide and hydroxide layers, which lead to a considerably low degradation rate at the physiological environment, has highly restricted their application. Herein we used numerical and experimental methods to evaluate the effect of severe shot peening, as a scalable mechanical surface treatment, on adjusting the performance of pure iron for biomedical applications. The developed numerical model was used to identify the range of peening parameters that would promote grain refinement on the pure iron surface. Experimental tests were then performed to analyze the gradient structure and the characteristics of the interface free surface layer created on peened samples. The results indicated that severe shot peening could notably increase the surface roughness and wettability, induce remarkable surface deformation and grain refinement, enhance surface hardness and generate high in-depth compressive residual stresses. The increased surface roughness besides the high concentration of micro cracks and dislocation density in the grain refined top layer promoted pure iron's degradation in the biologically simulated environment. STATEMENT OF SIGNIFICANCE: Biodegradable metallic materials with resorbable degradation products have a high potential to be used for temporary implants such as screws, pins, staples, etc. They can eliminate the need for implant retrieval surgery after the damaged tissue is healed, and result in reduced patient suffering besides lowered hospitalization costs. Pure iron is biodegradable and is an essential nutrient in human body; however, its application as biomedical implant is highly restricted by its slow degradation rate in physiological environment. We applied a scalable surface treatment able to induce grain refinement and increase surface roughness. This treatment enhances mechanical performance of pure iron and accelerates its degradation rate, paving the way for its broader applications for biomedical implants.
Subject(s)
Biocompatible Materials/chemistry , Iron/chemistry , Mechanical Phenomena , Computer Simulation , Electrochemistry , Finite Element Analysis , Numerical Analysis, Computer-Assisted , Stress, Mechanical , Surface PropertiesABSTRACT
The application of biodegradable magnesium-based materials in the biomedical field is highly restricted by their low fatigue strength and high corrosion rate in biological environments. Herein, we treated the surface of a biocompatible magnesium alloy AZ31 by severe shot peening in order to evaluate the potential of surface grain refinement to enhance this alloy's functionality in a biological environment. The AZ31 samples were studied in terms of micro/nanostructural, mechanical, and chemical characteristics in addition to cytocompatibility properties. The evolution of surface grain structure and surface morphology were investigated using optical, scanning and transmission electron microscopy. Surface roughness, wettability, and chemical composition, as well as in depth-microhardness and residual stress distribution, fatigue behaviour and corrosion resistance were investigated. Cytocompatibility tests with osteoblasts (bone forming cells) were performed using sample extracts. The results revealed for the first time that severe shot peening can significantly enhance mechanical properties of AZ31 without causing adverse effects on the growth of surrounding osteoblasts. The corrosion behavior, on the other hand, was not improved; nevertheless, removing the rough surface layer with a high density of crystallographic lattice defects, without removing the entire nanocrystallized layer, provided a good potential for improving corrosion characteristics after severe shot peening and thus, this method should be studied for a wide range of orthopedic applications in which biodegradable magnesium is used. STATEMENT OF SIGNIFICANCE: A major challenge for most commonly used metals for bio-implants is their non-biodegradability that necessitates revision surgery for implant retrieval when used as fixation plates, screws, etc. Magnesium is reported among the most biocompatible metals that resorb over time without adverse tissue reactions and is indispensable for many biochemical processes in human body. However, fast and uncontrolled degradation of magnesium alloys in the physiological environment in addition to their inadequate mechanical properties especially under repeated loading have limited their application in the biomedical field. The present study providesdata on the effect of a relatively simple surface nanocrystallziation method with high potential to tailor the mechanical and chemical behavior of magnesium based material while maintaining its cytocompatibility.
Subject(s)
Alloys/pharmacology , Materials Testing/methods , Nanostructures/chemistry , Osteoblasts/cytology , Cells, Cultured , Corrosion , Electrochemistry , Humans , Nanostructures/ultrastructure , Osteoblasts/drug effects , Surface PropertiesABSTRACT
Substrate grain structure and topography play major roles in mediating cell and bacteria activities. Severe plastic deformation techniques, known as efficient metal-forming and grain refining processes, provide the treated material with novel mechanical properties and can be adopted to modify nanoscale surface characteristics, possibly affecting interactions with the biological environment. This in vitro study evaluates the capability of severe shot peening, based on severe plastic deformation, to modulate the interactions of nanocrystallized metallic biomaterials with cells and bacteria. The treated 316L stainless steel surfaces were first investigated in terms of surface topography, grain size, hardness, wettability and residual stresses. The effects of the induced surface modifications were then separately studied in terms of cell morphology, adhesion and proliferation of primary human osteoblasts (bone forming cells) as well as the adhesion of multiple bacteria strains, specifically Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, and ampicillin-resistant Escherichia coli. The results indicated a significant enhancement in surface work hardening and compressive residual stresses, maintenance of osteoblast adhesion and proliferation as well as a remarkable decrease in the adhesion and growth of gram-positive bacteria (S. aureus and S. epidermidis) compared to non-treated and conventionally shot peened samples. Impressively, the decrease in bacteria adhesion and growth was achieved without the use of antibiotics, for which bacteria can develop a resistance towards anyway. By slightly grinding the surface of severe shot peened samples to remove differences in nanoscale surface roughness, the effects of varying substrate grain size were separated from those of varying surface roughness. The expression of vinculin focal adhesions from osteoblasts was found to be singularly and inversely related to grain size, whereas the attachment of gram-positive bacteria (S. aureus and S. epidermidis) decreased with increasing nanoscale surface roughness, and was not affected by grain refinement. Ultimately, this study demonstrated the advantages of the proposed shot peening treatment to produce multifunctional 316L stainless steel materials for improved implant functions without necessitating the use of drugs.
Subject(s)
Bacterial Adhesion , Nanostructures/chemistry , Osteoblasts/cytology , Stainless Steel/chemistry , Biocompatible Materials , Cell Adhesion , Cell Proliferation , Compressive Strength , Escherichia coli , Humans , Metals/chemistry , Microscopy, Electron, Scanning , Microscopy, Fluorescence , Osseointegration , Osteoblasts/metabolism , Osteoblasts/microbiology , Pseudomonas aeruginosa , Staphylococcus aureus , Staphylococcus epidermidis , Surface Properties , Wettability , X-Ray DiffractionABSTRACT
Cell-substrate interface is known to control the cell response and subsequent cell functions. Among the various biophysical signals, grain structure, which indicates the repeating arrangement of atoms in the material, has also proved to play a role of significant importance in mediating the cell activities. Moreover, refining the grain size through severe plastic deformation is known to provide the processed material with novel mechanical properties. The potential application of such advanced materials as biomedical implants has recently been evaluated by investigating the effect of different substrate grain sizes on a wide variety of cell activities. In this review, recent advances in biomedical applications of severe plastic deformation techniques are highlighted with special attention to the effect of the obtained nano/ultra-fine-grain size on cell-substrate interactions. Various severe plastic deformation techniques used for this purpose are discussed presenting a brief description of the mechanism for each process. The results obtained for each treatment on cell morphology, adhesion, proliferation, and differentiation, as well as the in vivo studies, are discussed. Finally, the advantages and challenges regarding the application of these techniques to produce multifunctional bio-implant materials are addressed.