Effects of the location of both anterior and lateral boundaries of the necrotic lesion on collapse progression in osteonecrosis of the femoral head.

BACKGROUND: The location of the lateral boundary of the necrotic lesion to the weight-bearing portion of the acetabulum (Type classification) is an important factor for collapse in osteonecrosis of the femoral head (ONFH). Recent studies also reported the significance of the location of the anterior boundary of the necrotic lesion on the occurrence of collapse. We aimed to assess the effects of the location of both anterior and lateral boundaries of the necrotic lesion on collapse progression in ONFH. METHODS: We recruited 55 hips with post-collapse ONFH from 48 consecutive patients, who were conservatively followed for more than one year. Using a plain lateral radiograph (Sugioka's lateral view), the location of the anterior boundary of the necrotic lesion to the weight-bearing portion of the acetabulum was classified as follows: Anterior-area I (two hips) occupying the medial one-third or less; Anterior-area II (17 hips) occupying the medial two-thirds or less; and Anterior-area III (36 hips) occupying greater than the medial two-thirds. The amount of femoral head collapse was measured by biplane radiographs at the onset of hip pain and each follow-up period, and Kaplan-Meier survival curves with collapse progression (≥1 mm) as the endpoint were produced. The probability of collapse progression was also assessed by the combination of Anterior-area and Type classifications. RESULTS: Collapse progression was observed in 38 of the 55 hips (69.0%). The survival rate of hips with Anterior-area III/Type C2 was significantly lower. Among hips with Type B/C1, collapse progression occurred more frequently in hips with Anterior-area III (21 of 24 hips) than in hips with Anterior-area I/II (3 of 17 hips, P < 0.0001). CONCLUSIONS: Adding the location of the anterior boundary of the necrotic lesion to Type classification was useful to predict collapse progression especially in hips with Type B/C1.

Joint-preserving effect and patient-reported outcomes of transtrochanteric curved varus osteotomy for osteonecrosis of the femoral head.

BACKGROUND: This study assessed the hip survival rate and patient-reported outcome measures (PROMs) of transtrochanteric curved varus osteotomy (CVO) for osteonecrosis of the femoral head (ONFH) compared with those of conservative management. METHODS: The CVO group comprised 32 consecutive patients (39 hips) who underwent CVO for ONFH between 2000 and 2011. The conservative group consisted of 36 consecutive patients (37 hips) who were managed conservatively for at least 1 year after collapse and who had ONFH classified by the Japanese Investigation Committee of Health and Welfare as type B or C1, for which CVO is indicated. Kaplan-Meier analysis of hip survival used any ONFH-related therapeutic surgery as the endpoint. PROMs were evaluated for all patients with surviving hips and radiographs available at the latest follow-up. RESULT: The 10-year hip survival rate in the CVO group was 86.7%, which was significantly higher than the 51.0% 5-year survival rate in the conservative group (p < 0.0001). The Oxford Hip Score and UCLA Activity Score were significantly better in the CVO group without joint space narrowing than in the conservative group, with no significant differences between the CVO group with joint space narrowing and the conservative group. CONCLUSION: CVO could preserve hip joints more effectively than conservative follow-up after collapse, although the presence of joint space narrowing could reduce satisfaction levels even in patients with long-term hip survival.

Predictors of physical activity recovery after total hip arthroplasty: a prospective observational study.

PURPOSE: Little is known about the changes and the factors in physical activity as following total hip arthroplasty (THA). There are potential discrepancies between subjective and objective measurements of physical activity. Thus, our porpose is to compare objective and subjective measurements of activity levels in patients undergoing THA preoperatively, three months and one year following surgery, and investigated the factors that predicts the objective activity level after THA. METHODS: This prospective observational study included 42 patients with unilateral symptomatic hip osteoarthritis who underwent THA. The objective activity level (step counts, sit-to-stands, and upright time) by using a tri-axial accelerometer, PRO (Oxford hip score; OHS and University of California, Los Angeles activity score; UCLA score), and muscle volume around the hip joint by using preoperative computed tomography were measured. RESULTS: The number of steps, OHS, and UCLA score before, at three months, and one year after THA averaged 5092, 6532, and 6545 steps, 30.3, 43.0, and 44.2 points, and 3.4, 4.8, and 4.6 points, respectively, with significant postoperative increases (P < 0.05). No significant difference was found between three months and one year postoperatively. In multivariate analysis, younger age and higher preoperative contralateral gluteal medius volume were the predictors of higher postoperative step counts (P < 0.05). CONCLUSIONS: Physical activity, including step counts, OHS, and UCLA score increased significantly until three months after unilateral THA. Early surgical intervention before contralateral muscle declines and preoperative rehabilitation including contralateral side may additionally improve postoperative activity levels.

Small change in the arithmetic hip-knee-ankle angle during unicompartmental knee arthroplasty improves early postoperative functional outcomes.

INTRODUCTION: The optimal lower-limb alignment after unicompartmental knee arthroplasty (UKA) remains controversial. This study aimed to investigate the optimal lower-limb alignment for functional improvement in the early post-UKA period. We hypothesized that a small change (Δ) in the arithmetic hip-knee-ankle (aHKA) angle during surgery would result in better postoperative knee function. MATERIALS AND METHODS: This single-centered, retrospective study analyzed 91 patients (91 knees) who underwent UKA from April 2021 and December 2022. Preoperative and postoperative standing whole-leg radiographs were used to evaluate the mechanical HKA angle and aHKA angle. The aHKA angle was calculated from the medial proximal tibial angle (MPTA) and lateral distal femoral angle (LDFA). We defined restored aHKA angle as a postoperative aHKA angle within ± 3° of the preoperative aHKA angle. Functional improvement was evaluated using the preoperative and one-year postoperative Knee Society Scoring 2011 (KSS 2011). A multivariate regression analysis was performed to investigate the optimal lower-limb alignment for functional improvement. RESULT: Postoperative restored aHKA angle (p = 0.020) was the only significant factor for improved KSS 2011 scores. Postoperative restored aHKA angle was obtained in 64 patients (70%). ΔMPTA (p < 0.001) and ΔLDFA (p = 0.037) were significant factors associated with a postoperative restored aHKA angle. CONCLUSIONS: UKA restores the native knee, including resurfacing constitutional alignment and medial collateral ligament tension. Minimal change in the aHKA angle during UKA improves the functional outcomes of the knee during the early postoperative period, consistent with the minimally invasive surgical concept of UKA.

"Grand-piano sign" as a femoral rotational indicator in both varus and valgus knees: a simulation study of anterior resection surface in total knee arthroplasty.

PURPOSE: The "Grand-piano sign" is a popular indicator of the appropriate rotational alignment of the femoral component during total knee arthroplasty (TKA). The aim of the study was to investigate the shape of the anterior femoral resection surface of varus and valgus knees. METHODS: A cohort of 80 varus knees and 40 valgus knees (hip-knee-ankle angle > 2° for varus and < - 2° for valgus knees) matched for age, sex, height, body weight, and KL grade was made using propensity score matching. Virtual TKA was performed using 3 patterns of components (anterior flange flexion angles of 3°, 5°, and 7°). The anterior femoral resection surface was evaluated for 3 patterns of rotational alignments: parallel to the surgical epicondylar axis (NR, neutral rotation), 3° internal rotation (IR), and 3°external rotation (ER) relative to the surgical epicondylar axis. In each anterior femoral resection surface, the vertical height of medial and lateral condyles was measured, and the ratio of the medial to the lateral height (M/L ratio) was evaluated. RESULTS: The M/L ratio in NR for both varus and valgus knees was 0.57 to 0.64, with no significant difference between the cohorts (p value > 0.05). The M/L ratio showed a similar pattern of increasing at IR and decreasing at ER in both varus and valgus knees. The variation in the M/L ratio with malrotation in valgus knees was smaller than in varus knees. CONCLUSION: During TKA, the anterior femoral resection surface was similar in varus and valgus knees; however, the variation with malrotation was smaller in valgus knees than in varus knees. TKA for valgus knees requires precise surgical technique and careful intraoperative assessment. LEVEL OF EVIDENCE: IV, Case series.

Objective Activity Levels and Patient-Reported Outcomes After Total Hip Arthroplasty and Periacetabular Osteotomy: Retrospective Matched Cohort Study at Mean 12-Year Follow-Up.

BACKGROUND: There is increasing interest in improving activity after total hip arthroplasty (THA) and periacetabular osteotomy (PAO). The present study evaluated whether there were differences in the subjective and objective activity levels of THA and PAO patients at mean 12-year follow-up (range 4-20) and what factors influence the objective activity levels. METHODS: THA and PAO patients (30 patients each; mean age: 66 and 63 years, respectively), who had undergone surgery for osteoarthritis due to acetabular dysplasia, were included. Patients were retrospectively matched based on age, gender, body mass index, follow-up duration, and preoperative University of California, Los Angeles activity score (UCLA score). Patients were surveyed for the subjective activity levels using the Oxford Hip Score and UCLA score. Objective activity levels (the number of steps, upright time, and the number of sit-to-stand transitions) were made using an accelerometer. RESULTS: There was no significant difference in subjective activity level between THA and PAO patients. The number of steps was significantly higher in PAO than in THA patients. Multivariable analyses revealed that THA and low Oxford Hip Score activities of daily living were negatively associated with the number of steps, that men and high UCLA score were negatively associated with upright time, and that high body mass index was negatively associated with sit-to-stand transitions in THA and PAO patients. CONCLUSION: This study suggested that although there was no difference in postoperative subjective activity level between THA and PAO patients, there was a difference in objective activity level. Providing guidance to these patients based on objective activity may lead to higher activity levels.

Anterior superior iliac spine is not always reliable as a pelvic reference axis. -3D study of pelvic axis.

BACKGROUND: This study aims to evaluate the accuracy of the axis connecting both anterior superior iliac spines (ASIS axis) as the absolute pelvic axis. No study has ever verified the accuracy of ASIS axis particularly on the AP pelvic radiograph, which cannot be specified on it. METHODS: Sixty patients who underwent total knee arthroplasty and fifty patients with femoral neck fracture were recruited as subjects without hip deformities and their CT scan data were collected. We defined the line through both center of femoral heads as absolute reference axis of pelvis three-dimensionally. On the coronal plane, the errors between the femoral head axis and the axes through six pelvic landmarks in total, including ASIS were analyzed. On the axial plane, the errors of the lines through four landmarks were analyzed in the same way. Finally, on the coronal images, the mediolateral diameter of the obturator foramen and the mediolateral distance between the midline of the sacrum and the pelvic cavity were measured to evaluate bilateral symmetry of the pelvis. RESULTS: The errors tended to be smaller as the axes were closer to the femoral head axis (axes connecting bilateral superior aspects of the acetabulum and the teardrops) and the ASIS axis errors were moderate. The obturator foramen based on the ASIS axis was more asymmetrical than the femoral head axis. CONCLUSION: Adjusting the pelvic tilt and rotation, surgeons should not always rely on the ASIS and refer to appropriate, close to the hip joint references in each case.

Similar short-term KOOS between open-wedge high tibial osteotomy and total knee arthroplasty in patients over age 60: A propensity score-matched cohort study.

OBJECTIVES: The purpose of the present study was to evaluate improvement in the Knee Injury and Osteoarthritis Outcome Score (KOOS) after open-wedge high tibial osteotomy (HTO) in comparison with total knee arthroplasty (TKA) in cohorts over age 60 matched by pre-operative age, gender, body mass index (BMI), hip-knee-ankle angle (HKAA), KOOS sub-scores, and osteoarthritis (OA) grade. METHODS: Propensity score matching was performed between 162 HTO patients and 134 TKA patients. When calculating the propensity score by multivariate logistic regression analysis, the following pre-operative confounders were included: age, gender, BMI, HKAA, KOOS sub-scores, and OA grade. Consequently, a total of 55 patients were included in each group. The Student's t-test was used to analyse differences in the post-operative KOOS sub-scores between groups. RESULTS: After propensity score matching, all matched pre-operative valuables were identical, with no significant differences between the HTO and TKA groups. None of the post-operative KOOS sub-scores at 1 year after surgery showed a significant difference between the HTO and TKA groups. Both groups demonstrated significant and comparable post-operative improvement in every KOOS sub-score. CONCLUSIONS: In patients over age 60, there was no significant difference in short-term pain relief and improvements in activity and quality of life between HTO and TKA after propensity score matching including pre-operative age, KOOS sub-scores, and OA grade. HTO is a joint preservation procedure that is valid for knee OA even in individuals over age 60.

Is Anterior Rotation of the Acetabulum Necessary to Normalize Joint Contact Pressure in Periacetabular Osteotomy? A Finite-element Analysis Study.

BACKGROUND: Inappropriate sagittal plane correction can result in an increased risk of osteoarthritis progression after periacetabular osteotomy (PAO). Individual and postural variations in sagittal pelvic tilt, along with acetabular deformity, affect joint contact mechanics in dysplastic hips and may impact the direction and degree of acetabular correction. Finite-element analyses that account for physiologic pelvic tilt may provide valuable insight into the effect of PAO on the contact mechanics of dysplastic hips, which may lead to improved acetabular correction during PAO. QUESTIONS/PURPOSES: We performed virtual PAO using finite-element models with reference to the standing pelvic position to clarify (1) whether lateral rotation of the acetabulum normalizes the joint contact pressure, (2) risk factors for abnormal contact pressure after lateral rotation of the acetabulum, and (3) whether additional anterior rotation of the acetabulum further reduces contact pressure. METHODS: Between 2016 and 2020, 85 patients (92 hips) underwent PAO to treat hip dysplasia. Eighty-two patients with hip dysplasia (lateral center-edge angle < 20°) were included. Patients with advanced osteoarthritis, femoral head deformity, prior hip or spine surgery, or poor-quality images were excluded. Thirty-eight patients (38 hips) were eligible to participate in this study. All patients were women, with a mean age of 39 ± 10 years. Thirty-three women volunteers without a history of hip disease were reviewed as control participants. Individuals with a lateral center-edge angle < 25° or poor-quality images were excluded. Sixteen individuals (16 hips) with a mean age of 36 ± 7 years were eligible as controls. Using CT images, we developed patient-specific three-dimensional surface hip models with the standing pelvic position as a reference. The loading scenario was based on single-leg stance. Four patterns of virtual PAO were performed in the models. First, the acetabular fragment was rotated laterally in the coronal plane so that the lateral center-edge angle was 30°; then, anterior rotation in the sagittal plane was added by 0°, 5°, 10°, and 15°. We developed finite-element models for each acetabular position and performed a nonlinear contact analysis to calculate the joint contact pressure of the acetabular cartilage. The normal range of the maximum joint contact pressure was calculated to be < 4.1 MPa using a receiver operating characteristic curve. A paired t-test or Wilcoxon signed rank test with Bonferroni correction was used to compare joint contact pressures among acetabular positions. We evaluated the association of joint contact pressure with the patient-specific sagittal pelvic tilt and acetabular version and coverage using Pearson or Spearman correlation coefficients. An exploratory univariate logistic regression analysis was performed to identify which of the preoperative factors (CT measurement parameters and sagittal pelvic tilt) were associated with abnormal contact pressure after lateral rotation of the acetabulum. Variables with p values < 0.05 (anterior center-edge angle and sagittal pelvic tilt) were included in a multivariable model to identify the independent influence of each factor. RESULTS: Lateral rotation of the acetabulum decreased the median maximum contact pressure compared with that before virtual PAO (3.7 MPa [range 2.2-6.7] versus 7.2 MPa [range 4.1-14 MPa], difference of medians 3.5 MPa; p < 0.001). The resulting maximum contact pressures were within the normal range (< 4.1 MPa) in 63% of the hips (24 of 38 hips). The maximum contact pressure after lateral acetabular rotation was negatively correlated with the standing pelvic tilt (anterior pelvic plane angle) (ρ = -0.52; p < 0.001) and anterior center-edge angle (ρ = -0.47; p = 0.003). After controlling for confounding variables such as the lateral center-edge angle and sagittal pelvic tilt, we found that a decreased preoperative anterior center-edge angle (per 1°; odds ratio 1.14 [95% CI 1.01-1.28]; p = 0.01) was independently associated with elevated contact pressure (≥ 4.1 MPa) after lateral rotation; a preoperative anterior center-edge angle < 32° in the standing pelvic position was associated with elevated contact pressure (sensitivity 57%, specificity 96%, area under the curve 0.77). Additional anterior rotation further decreased the joint contact pressure; the maximum contact pressures were within the normal range in 74% (28 of 38 hips), 76% (29 of 38 hips), and 84% (32 of 38 hips) of the hips when the acetabulum was rotated anteriorly by 5°, 10°, and 15°, respectively. CONCLUSION: Via virtual PAO, normal joint contact pressure was achieved in 63% of patients by normalizing the lateral acetabular coverage. However, lateral acetabular rotation was insufficient to normalize the joint contact pressure in patients with more posteriorly tilted pelvises and anterior acetabular deficiency. In patients with a preoperative anterior center-edge angle < 32° in the standing pelvic position, additional anterior rotation is expected to be a useful guide to normalize the joint contact pressure. CLINICAL RELEVANCE: This virtual PAO study suggests that biomechanics-based planning for PAO should incorporate not only the morphology of the hip but also the physiologic pelvic tilt in the weightbearing position in order to customize acetabular reorientation for each patient.

Improved surgical procedure of primary constrained total knee arthroplasty which enables use of the femoral diaphyseal straight extension stem.

BACKGROUND: In performing primary constrained total knee arthroplasties (TKA) to imbalanced knees, the offset stem is sometimes compelled to use, although this is associated with surgical difficulties. We developed a modified procedure which might be able to fit the anteroposterior (AP) and mediolateral (ML) position of the femoral component simultaneously with the straight stem. Purposes of this study were to evaluate usefulness of the modified procedure both in computer simulations and actual surgeries. METHODS: We included 32 knees that had undergone primary TKA using constrained implants because of the coronal imbalance. In the component-first procedure, the distal femur was prepared to fit the AP and ML position of the femoral component simultaneously at first, as in primary TKA. Finally, the stem hole is created based on the femoral component position (the component-first procedure). The femoral component and extension stem were simulated using the three-dimensional planning software (ZedKnee) following the component-first procedure. We investigated the suitability of the straight stem through computer simulation and evaluation of actual surgeries. Clinical and radiographical outcomes were also evaluated at the latest follow-up. RESULTS: The component-first procedure enabled the AP and ML position of the femoral component to be fitted simultaneously with the straight stem in simulations and actual surgeries in all cases. The stem diameter was not significantly different between simulations and actual surgeries (13.9 and 13.7 mm on average, respectively, p = 0.479) and almost similar from intraclass correlation coefficient analysis (kappa value 0.790). Clinical and radiographical outcomes were almost similar to primary TKA cases and there was no case of component loosening, cortical bone hypertrophy around the stem and stem-tip pain. CONCLUSIONS: Our improved surgical procedure may facilitate use of the constrained implant for more cases of primary TKA in imbalanced knees without the usual surgical difficulties. TRIAL REGISTRATION: Retrospectively registered.

Sagittal femoral bowing contributes to distal femoral valgus angle deviation in malrotated preoperative radiographs.

BACKGROUND: The coronal whole-leg radiograph is generally used for preoperative planning in total knee arthroplasty. The distal femoral valgus angle (DFVA) is measured for distal femoral bone resection using an intramedullary guide rod. The effect of coronal and sagittal femoral shaft bowing on DFVA measurement in the presence of malrotation or knee flexion contracture has not been well reported. The objectives of this study were: (1) to investigate the effects of whole-leg malrotation and knee flexion contracture on the DFVA in detail, (2) to determine the additional effect of coronal or sagittal femoral shaft bowing. METHODS: We studied 100 consecutive varus and 100 valgus knees that underwent total or unicompartmental knee arthroplasty. Preoperative CT scans were used to create digitally reconstructed radiography (DRR) images in neutral rotation (NR, parallel to the surgical epicondylar axis), and at 5° and 10° external rotation (ER) and internal rotation (IR). The images were also reconstructed at 10° femoral flexion. The DFVA was evaluated in each DRR image, and the angular variation due to lower limb malposition was investigated. RESULTS: The DFVA increased as the DRR image shifted from IR to ER, and all angles increased further from extension to 10° flexion. The DFVA variation in each position was 1.3° on average. A larger variation than 2° was seen in 12% of all. Multivariate regression analysis showed that sagittal femoral shaft bowing was independently associated with a large variation of DFVA. Receiver operating characteristic analysis showed that more than 12° of sagittal bowing caused the variation. CONCLUSION: If femoral sagittal bowing is more than 12°, close attention should be paid to the lower limb position when taking whole-leg radiographs. Preoperative planning with whole-leg CT data should be considered.

Effect of coronal plane acetabular correction on joint contact pressure in Periacetabular osteotomy: a finite-element analysis.

BACKGROUND: The ideal acetabular position for optimizing hip joint biomechanics in periacetabular osteotomy (PAO) remains unclear. We aimed to determine the relationship between acetabular correction in the coronal plane and joint contact pressure (CP) and identify morphological factors associated with residual abnormal CP after correction. METHODS: Using CT images from 44 patients with hip dysplasia, we performed three patterns of virtual PAOs on patient-specific 3D hip models; the acetabulum was rotated laterally to the lateral center-edge angles (LCEA) of 30°, 35°, and 40°. Finite-element analysis was used to calculate the CP of the acetabular cartilage during a single-leg stance. RESULTS: Coronal correction to the LCEA of 30° decreased the median maximum CP 0.5-fold compared to preoperatively (p <  0.001). Additional correction to the LCEA of 40° further decreased CP in 15 hips (34%) but conversely increased CP in 29 hips (66%). The increase in CP was associated with greater preoperative extrusion index (p = 0.030) and roundness index (p = 0.038). Overall, virtual PAO failed to normalize CP in 11 hips (25%), and a small anterior wall index (p = 0.049) and a large roundness index (p = 0.003) were associated with residual abnormal CP. CONCLUSIONS: The degree of acetabular correction in the coronal plane where CP is minimized varied among patients. Coronal plane correction alone failed to normalize CP in 25% of patients in this study. In patients with an anterior acetabular deficiency (anterior wall index < 0.21) and an aspherical femoral head (roundness index > 53.2%), coronal plane correction alone may not normalize CP. Further studies are needed to clarify the effectiveness of multiplanar correction, including in the sagittal and axial planes, in optimizing the hip joint's contact mechanics.

Wear analysis of the first-generation cross-linked polyethylene at minimum 10 years follow-up after THA: no significant effect of sports participation.

The impact of sports on long-term wear of highly cross-linked polyethylene (XLPE) after total hip arthroplasty (THA) is not fully understood. We investigated (1) the wear performance of the first-generation XLPE, and (2) whether sports participation influences the steady wear rate of XLPE. The femoral head penetration into the cup was measured digitally on radiographs of hips undergoing THA with XLPE. We retrospectively reviewed data that included age, gender, body mass index, follow-up period, preoperative diagnosis, types of XLPE, ball diameter, head material, inclination of the cup, physical function score, and sports participation. Statistical analyses were applied to determine whether sports affect the wear of XLPE and which factors were associated with the steady wear rate. Creep and steady wear rate were found to be 0.18 mm and 0.005 mm/year, respectively. Sports participation, regardless of impact, provided no significant difference in the steady wear rate. Multiple regression analysis demonstrated that sports did not increase the steady wear rate. Our findings showed excellent wear performance of the first-generation XLPE at a minimum of ten years after THA, without significant effect of sports participation on the liner wear.

Transverse osteotomy closer to tibial plateau is associated with larger postoperative change in valgus laxity after open-wedge high tibial osteotomy.

PURPOSE: To identify the factors impacting changes in valgus laxity between before and after open-wedge high tibial osteotomy (OW-HTO) using quantitative valgus stress radiographs. METHODS: A total of 40 knees from 38 patients who underwent OW-HTO were assessed. The study population comprised 14 men and 24 women, with a mean age of 61.5 years. Valgus stress radiographs before and 1 year after OW-HTO were performed using a Telos device. The difference between pre- and postoperative joint line convergence angle (JLCA) was expressed as ΔJLCA (post-pre). As indicators of the proximal detachment of superficial medial collateral ligament (sMCL) on radiographs, two distances were defined: the distance from the level of the osteotomy starting point to the tangent line of the proximal tibial plateau (Distance A), or to the medial edge of the proximal tibial plateau (Distance B). Correlations between ΔJLCA and radiographic parameters or KOOS sub-scores were assessed using Spearman's rank correlation coefficient analysis. Receiver operator curves were generated to evaluate the predictive strength of the significant factor for an increase in ΔJLCA > 1°. RESULTS: Pre-operative OA severity consisted of Kellgren-Lawrence grade 2 (n = 18), 3 (n = 16), and 4 (n = 6). The average ΔJLCA (post-pre) was 0.5°, and ranged from - 1.4° to + 3.0°. The maximum systemic measurement error and limits of agreement were 0.07° and 0.20°, respectively. There were significant correlations between ΔJLCA and Distance A (36.9 ± 3.9 mm, R = - 0.46, p = 0.002), between ΔJLCA and Distance B (39.9 ± 4.0 mm, R = - 0.49, p = 0.001). The cut-off value for Distance A was determined to be 35 mm below the tibial plateau; the AUC was 0.804, with a sensitivity of 0.75 and a specificity of 0.82. Distance B correlated strongly with Distance A (R = 0.96, p < 0.001). There was no significant correlation between ΔJLCA and KOOS sub-scores 1 year after OW-HTO. CONCLUSIONS: Transverse osteotomy closer to tibial plateau was associated with larger valgus joint laxity postoperatively. This finding implies that sMCL proximal detachment, which was related to the level of the osteotomy starting point on the proximal tibia, potentially affected postoperative valgus laxity. LEVEL OF EVIDENCE: IV.

Factors Associated With Abnormal Joint Contact Pressure After Periacetabular Osteotomy: A Finite-Element Analysis.

BACKGROUND: Identifying factors associated with poor hip contact mechanics after periacetabular osteotomy (PAO) may help surgeons optimize acetabular corrections in individual patients. We performed individual-specific finite-element analyses to identify preoperative morphological and surgical correction factors for abnormal contact pressure (CP) after PAO. METHODS: We performed finite-element analyses before and after PAO with reference to the standing pelvic position on individual-specific 3-dimensional hip models created from computed tomography images of 51 dysplastic hips. Nonlinear contact analyses were performed to calculate the joint CP of the acetabular cartilage during a single-leg stance. RESULTS: The maximum CP decreased in 50 hips (98.0%) after PAO compared to preoperative values, and the resulting maximum CP was within the normal range (<4.1 MPa) in 33 hips (64.7%). Multivariate analysis identified the roundness index of the femoral head (P = .002), postoperative anterior center-edge angle (CEA; P = .004), and surgical correction of lateral CEA (Δlateral CEA; P = .003) as independent predictors for abnormal CP after PAO. A preoperative roundness index >54.3°, a postoperative anterior CEA <36.3°, and a Δlateral CEA >27.0° in the standing pelvic position predicted abnormal CP after PAO. CONCLUSION: PAO normalized joint CP in 64.7% of the patients but was less likely to normalize joint CP in patients with aspheric femoral heads. Successful surgical treatment depends on obtaining adequate anterior coverage and avoiding excessive lateral correction, while considering the physiological pelvic tilt in a weight-bearing position.

Squatting After Total Hip Arthroplasty: Patient-Reported Outcomes and In Vivo Three-Dimensional Kinematic Study.

BACKGROUND: Squatting is an important function for many daily activities, but has not been well documented after total hip arthroplasty (THA). This study investigated the participation rate of squatting and in vivo kinematics during squatting. METHODS: A survey questionnaire about squatting was mailed to patients who underwent primary THA and 328 patients returned acceptable responses. Additionally, 32 hips were evaluated for dynamic 3-dimensional kinematics of squatting using density-based image-matching techniques. Multivariate analyses were applied to determine which factors were associated with anterior liner-to-neck distance at maximum hip flexion. RESULTS: Patients who could easily squat significantly increased this ability postoperatively (23.5% vs 46%, P < .01). In 29.5% of the patients there was still no ability to squat after THA; the main reason was anxiety of dislocation (34.2%). Kinematic analysis revealed that maximum hip flexion averaged 80.7° ± 12.3° with 12.8° ± 10.7° of posterior pelvic tilt and 9.7 ± 3.0 mm of anterior liner-to-neck distance. Neither liner-to-neck, bone-to-bone, nor bone-to-implant contact was observed in any of the hips. Larger hip flexion and smaller cup anteversion were negatively associated with the anterior liner-to-neck distance at maximum hip flexion (P < .05). CONCLUSION: Postoperatively, approximately 70% of patients squatted easily or with support. Anxiety of dislocation made patients avoid squatting after THA. In vivo squatting kinematics suggest no danger of impingement or subsequent dislocation, but excessively large hip flexion and small cup anteversion remain as risks.

Gradual-radius femoral component with s-curve post-cam provides stable kinematics at mid-flexion after total knee arthroplasty.

BACKGROUND: Mid-flexion instability is the one of the reasons for patient dissatisfaction after total knee arthroplasty (TKA). The purposes of this study were to evaluate in vivo knee kinematics and clinical outcomes using a novel TKA design with a gradual femoral radius component and s-curve post-cam, which are intended to prevent the instability initiated by sudden reductions in the femoral radius observed with conventional components. METHODS: We used radiographic-based, image-matching techniques to analyze femorotibial anteroposterior translation, axial rotation, and anterior/posterior cam-post contact during two dynamic movements, squatting and stair climbing, in 20 knees that had undergone posterior-stabilized fixed-bearing TKA with an improved sagittal profiles of the femoral component and post-cam mechanism. We also evaluated patient-reported outcomes assessed by the 2011 Knee Society Score (KSS 2011). RESULTS: Squatting and stair climbing produced a similar trend in anteroposterior translation and a relatively small standard deviation at mid-flexion. Although the rotation angles varied widely during squatting and stair climbing, the femoral component was consistently externally rotated. Anterior/posterior cam-post contact during squatting and stair climbing were observed in 0/17 knees and 0/0 knees, respectively. The "Symptoms", "Satisfaction", and "Functional activities" subscales of the KSS 2011 were significantly (P < 0.05) improved postoperatively compared to preoperatively ("Symptoms", 10 to 21; "Satisfaction", 15 to 26; "Functional activities", 25 to 71). CONCLUSION: A gradual femoral radius component with an s-curve post-cam provided stable kinematics and favorable clinical results during squatting and stair climbing at 1 year after surgery.

Angular accuracy of plain radiographic measurements in leg alignment: Teleoroentgenogram versus orthoroentgenogram.

BACKGROUND: The purpose of the present study was to evaluate the accuracy of the measurements associated with leg alignment on a teleoroentgenogram and an orthoroentgenogram. METHODS: The models being irradiated were manufactured and represented 10° varus and 15° varus leg alignment, in which the true values of hip-knee-ankle angle (HKAA), mechanical axis (MA) length, and percentage of MA (%MA) were already known. HKAA, MA length, and %MA were measured in various radiographic conditions of the teleoroentgenogram and orthoroentgenogram. Then, the differences between the radiographic measurement values and the corresponding true values were analyzed. RESULTS: Regarding HKAA, the teleoroentgenogram provided accurate angular measurements with minimal differences between the measurement and true value in both the 10° and 15° varus models, irrespective of the radiographic condition. In the orthoroentgenogram, the modified method measured accurate HKAA; however, the standard method showed significant angular measurement errors with a 0.6° and 1.0° difference from the true value in the 10° and 15° varus models, respectively. This angular measurement error of HKAA in the standard orthoroentgenogram became significantly larger with object-to-image distance. Regarding MA length, the orthoroentgenogram exhibited accurate length measurements. In contrast, the teleoroentgenogram showed a significant length measurement error for the MA length. Regarding %MA, significant differences from the true values of 2.0% and 2.4% were observed in the modified orthoroentgenograms of the 10° and 15° varus models, respectively. The teleoroentgenogram and standard orthoroentgenogram reproduced the accurate measurement value of %MA in the 10° and 15° varus models. CONCLUSION: A teleoroentgenogram is a reliable modality for accurate angular measurements such as HKAA and %MA. An orthoroentgenogram has the potential to measure both HKAA and length accurately if the radiographic condition was modified; however, measurement error in %MA may occur.

Smaller femoral neck anteversion in varus knees than in healthy and valgus knees.

It is important to investigate anatomical differences of the femur and tibia three-dimensionally between varus and valgus knees to enhance surgical approaches and better understand structural factors related to specific patterns of osteoarthritis progression. Three-dimensional femoral and tibial bone models were reconstructed from transverse computed-tomography scans in varus osteoarthritis (43 knees), valgus osteoarthritis (40 knees), and healthy (32 knees) groups. Different coordinate systems were defined in each femoral bone model ("Knee" and "Hip" Coordinate System). Femoral neck inclination, lateral bowing, anterior bowing, and neck anteversion were measured and compared between knee and hip coordinate systems. Those parameters were also compared between varus, valgus, and healthy groups. The tibial anterior and lateral bowing, external torsion and the fibular axis relative to the tibial mechanical axis were measured and compared between varus and valgus groups. Femoral neck anteversion was significantly 1-2° greater in the hip coordinate system compared to the knee coordinate system. Femoral neck anteversion was significantly smaller in varus knees than in healthy or valgus knees, with average difference of approximately 5°. The knee and hip joint are often rotated externally relative to the trunk axis in patients with varus osteoarthritis, perhaps maintaining the geometric relations between pelvis and proximal femur (including peripheral hip muscles) regardless of knee deformities. The fibular axis was inclined slightly valgus and posteriorly in two groups. The results may inform hypotheses on, and future studies of, skeletal morphologic development and factors contributing to the progression of knee osteoarthritis.

Pneumatic femoral broaching decreases post-operative subsidence of a cementless taper-wedge stem.

PURPOSE: Stem subsidence is a known cause of early failure in cementless total hip arthroplasty (THA). The aim of this study was to determine the usefulness of pneumatic femoral broaching in preventing post-operative subsidence of a proximally porous-coated, taper-wedge stem. METHODS: We reviewed 169 cases of primary THA with a single taper-wedge stem. Eighty THAs performed using pneumatic broaching were compared with 89 THAs performed using manual broaching in terms of postoperative canal fill ratio (CFR) at three levels, stem subsidence at one year post-operation, and stem fixation at latest follow-up (median, 24 months). RESULTS: The median CFRs were higher in the pneumatic group than in the manual group at all levels (p < 0.05). The median stem subsidence at one year after THA was lower in the pneumatic group than in the manual group (0.2 mm vs. 0.6 mm, p = 0.007). A multivariate analysis determined a decreased CFR at 60 mm below the lesser trochanter and the manual broaching as independent factors affecting post-operative stem subsidence. At the latest follow-up, all stems showed stable fixation by bone ingrowth in both groups. CONCLUSION: Our results showed that the pneumatic broaching device was useful in maximizing the mediolateral canal filling and initial stability and minimizing the subsidence of taper-wedge stems.